The SL1 does support Auto ISO in manual mode?

Similar Questions

• The E3000 does support 5 GHz channels > = 149 or only 36-48?

  Hi, I have read various messages of the forum saying best performance of a wifi router, you must use the channel 149 or MORE and only 36-48 have a lower signal strength and therefore less range and speed.

  I live in New Zealand and when I select the drop-down list for the 5 GHz band wireless channel he mentions only 5 options - Auto (dfs), 36, 40, 44 and 48. I read the posts of the forum of people saying you should switch to 149 or more and I saw some screenshots showing the drop-down list with 149 selected. But I did not have this option.

  If I check status > Wireless page, it shows that the channel 36 is used (for automotive).

  I'm doing something wrong? E3000 in this part of the world do not support 149 etc.?

  I spoke in a live chat with a support representative who told me that all the E3000 are the same everywhere in the world and there was little or no difference between them in the firmware. I was also told that 36-48 strings are high gain and so there is no need for other channels, which contradicts the other articles I've read what 36-48 state are weaker channels.

  Can anyone shed light on this sone?

  Thank you.

  It is forbidden to put an access point wireless statically on a higher channel. All channels except the four listed should be used with DFS.

  See http://homecommunity.cisco.com/t5/Wireless-Routers/E4200-5ghz-channels/m-p/393155

• The T61 does support Windows x 64?

  Hey guys I'm uprgrading my memory in my T61 7663-13U to 4 GB and I was wondering if my laptop supports 64-bit Windows. Because if he doesn't not I don't bother upgrading.

  Thanks for any help.

  Also if he does, does anyone know of good memory at low prices?

  Welcome to the forum!

  Yes, your computer supports 64-bit operating systems, be it Windows or anything else.

• Qosmio F750 does support NVIDEA 3D Vision with glasses?

  Hallo!

  the portable actiually supports 3D without glasses. But I have another question:
  the F750 does support 3D * with * glasses? I want to wear glasses from NVIDEA 3D Vision. According to NVIDIA, specification for the glasses the F750 must be supported. But I can't put the 3D mode. I installed the new dreiver and BIOS 2.0. In framework of NVIDEA is now 3D appeared. To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

  Can you help me please!

  Kind regards
  Doxtor

  > To achieve a 3D mode it is necessary to adjust the 120 Hz display, but I can choose 60 Hz only.

  So this is not supported would need an external monitor that supports the 120 Hz

• Satellite A200 - 1 GB does support SATA 300 HARD drive?

  I want to spend my Sat A200 - 1 GB hard disk with a 7200 RPM one... but they are all SATA300 models.
  Is this speed mode supported by the bios, motherboard and sata controller of this laptop?

  I just want to be sure that the hard drive works at its maximum speed capability and the sata and the mobo will not be a bottleneck...

  If Yes, the sata controller driver whichsis?... I want this wake in my own vista installation disc.

  Hello!

  Yes, you can use a disk with SATA300 mode but it only works in normal mode SATA no more at maximum speed. The Satellite A200 supports only SATA 1.0 mode (SATA150).

  You can use a HARD drive with 7200 RPM, this isn't a problem.

  What HARD drive capacities are supported, that you can see in the user manual. Look in Chapter 1.

  The SATA driver is in the Intel Storage Manager package.

  Good bye

• 5 M4 D, ISO in Tv mode

  5 D M4, in Tv mode, camera is chosen ISO ignorant, behaves as if the AUTO ISO is selected. Works very well in mode P, AV and Mr., I know that for Av and P, there is a setting to AUTO ISO to a minimum shutter speed. But what makes camera to select AUTO ISO in Tv mode?

  I think that at some point, while in Tv mode, you set one of the options to update ISO like this.  For each of the mode, the la camera camera will remember your changes just for this mode until you change:

  

• Satellite 2450 does not start - only in safe mode

  Hello

  I'm having a problem with my Satellite 2450 where it is not initialize properly - is stuck in the screen of Windows XP (just continues to scroll through and hangs there).
  I can boot into safe mode.
  Have not had any other problems with it - no errors, do not have installed/uninstalled anything recently.

  Any ideas what could cause this problem?
  Do you think I should use the recovery disk to reinstall the OS? Anything less drastic I can try?

  any advice appreciated,
  Thanks in advance.

  Hello

  Usually, if the laptop does not start correctly in normal mode, but only in SafeMode because some drivers or / and software applications are false or defective.
  In this case, the recovery procedure should solve this problem.
  If you n t have the Toshiba Recovery CD, you can install from the original CD of Microsoft's operating system, and then you can try to install stuff together from Toshiba (driver, tools)
  These software, you will find on the page of the Toshiba driver.

• installed the latest updates of windows 7... now the computer does not recognize my video files avi... says "format not supported".

  I have installed the latest updates (02/27/10) and when I open sony vegas to edit some files avi... they were offline... when I tried to read with windows media player it says format not supported... before when I played these files, they would not have to synchronize audio... it never happened with my other computer with Vista... system restore solved the problem of format not supported... but so far has caused this problem? and what about the problems of synchronization? the files seem to sync when played with the hp program...

  Hi derlonewolf,
   
  Because you performed a System Restore you would not be able to determine which update problem from occurring. You will have to wait for the update to your computer to determine the update that caused the problem. The update does not necessarily cause the problem to occur again. However, you can view the history of updates to updating history.
   
  1. open the control panel (all items view), and click the Windows Update icon.
   
  2. click on the link to view update history.
   
  3. to view the details of a single Windows Update-
   
  (A) select and right-click on a Windows Update list, and then click details.
   
  (B) click on close when finished.
   
  As far as the question of timing is concerened, you can scan SFC on your computer and check if the problem persists.
  
  Steps to perform a scan SFC:
   
  1. Click Start, click principally made programs, accessories, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow
   
  2. type the following command and press ENTER:
  sfc/scannow
  [The command sfc /scannow. analysis of all protected system files and replaces incorrect versions with appropriate Microsoft versions.]
   
  A message appears indicating that "the system scan will start. Be patient, because the analysis may take some time
   
  3. If all the files require that a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue
   
  4. If all goes although you should, after the analysis, see the following message "Windows resource protection not found any breach of integrity.
   
  5. once the scan is finished, close the command prompt window, restart the computer and check.
   
  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833
   
  You can also make manual updates instead of automatic updates and then see what are updates will be installed on the computer.

  See : http://windows.microsoft.com/en-us/windows7/Turn-automatic-updating-on-or-off

  Post back with the status

   
   
  Aziz Nadeem - Microsoft Support

• The Z3 Xperia does support MirrorLink?

  Does anyone know if the Xperia Z3 supports MirrorLink?

  I have a central unit with radio xav-602bt and would like to know. Currently I have the Xperia Z which works very well. The list of compatible phones website said the job of Z1 and Z2, but I don't know if the site should just update or if in fact the Z3 is simply not supported!

  According to the Z3 manual, it has mirror link

  http://Userguide.sonymobile.com/referrer.php?region=SG&product=Xperia-Z3#! Connecting-your-car-help-...

• Windows 7 does support ISO 9660 records on CD - R or am I stuck with Windows XP to do this without having to buy another program?

  Windows 7 does support ISO 9660 records on CD - R or am I stuck with Windows XP to do this without having to buy another program?  can I use Linux to do? Impossible to get same bing to give me AN answer.

  Hi Prince Eugène,
   
  May I know what you're trying to search in BING?

  Yes, Windows 7 supported ISO 9660 records on CD - R.

  For more information, visit the link given below:

  http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/burn-a-CD

  http://Windows.Microsoft.com/en-us/Windows7/burn-a-CD-or-DVD-in-Windows-Explorer

  I suggest you to connect with LINUX for other queries.

  https://www.redhat.com/apps/support/

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Unable to boot to the desktop does not work auto repair

  I recently updated my windows 7 to windows 8 and now the PC is stuck in a loop of auto repair of windows 8. The PC does not the same page and there is no way to start the PC in safe mode (as you can when you get a virus). The repair just doesn't work.

  I have read various other forums (and it seems that this is a common fault) and I tried all the things suggested on the command screen but none of them work.
  Anyone know how I can fix this without losing my personal data - I have over 10,000 photos on the PC and do not want to lose any of them. So I really don't want to uninstall it and wipe the data.
  Help, please!
  Thank you

  Separated from the:

  https://answers.Microsoft.com/en-us/Windows/Forum/windows_8-system/Windows-8-stuck-in-automatic-repair-loop-help/456ca2a5-e9c2-4197-9087-a179384e92e7

  Andrew B. salvation,

  Thanks for the reply with more information.

  We have of Windows 8 installation media or create an installation media.

  Once you have the disc, follow the steps above and try to rebuild the configuration Data (BCD) start.

  Note: If the computer is newly purchased, it would be preferable to contact the computer manufacturer to address this problem. (If during the warranty period).

  Here are some measures that could help solve this problem.

  I suggest you to rebuild the BCD (Boot Configuration data) fromcommand line and check if that helps.

  1. Insert the installation of Windows 8 media and start the computer using the disc.

  Note: You will need to consult the computer manual on how to set the CD/DVD drive as the first boot device in the BIOS.

  2. Once you start using the installation disk of Windows, on the installation of Windows 8 window, click on repair your computer.

  3. click on Troubleshooting and Advanced options. Select command prompt. Enter the following commands to four in the command prompt.

  Bootrec /fixmbr
  Bootrec /fixboot
  Bootrec /scanos
  Bootrec /rebuildbcd

  Once the order is complete, restart the computer.

  Hope this information helps.

• The destination does not support the EFI firmware.

  Hello

  I have a Debian Linux 7.0 physics I'm P2V using converter 5.5.3.  When I choose my target ESXi server, I like:

  The destination does not support the EFI firmware.

  How confirm/deny, or enable the EFI on my node ESXi support?

  Hello

  This may be a false signal. The problem is that Debian is not a taken GOS supported for the converter. That's why he treats her like "Other Linux" and then the ESXi responds that it does not support the "other Linux" on EFI.

  Unfortunately I see no significant workaround solution. There is a crazy idea - converter checks if the source computer's BIOS or EFI by searching the directory/sys/firmware/efi/vars. If you can somehow it wrong that there is no (I don't know how), it might treat the source such as BIOS and convert it. When this happens, you should then change the VM of destination to EFI firmware and manually create the EFI boot entry somehow.

  Concerning

  Plamen

• Font size set to auto but sounds different when the data are populated compared to typed manually

  I have a form where all the size of the font of fields is set to auto. When data are filled in the form in a custom program the font size appears different to the name and first name fields. When the same names are typed manually in the form (not filled in the custom program) the font size remains uniform. There is no coding in the personalized program to manipulate the fonts or the font settings. What could be the cause of the change in the appearance of the font size. Another interesting is that after the program fills in the data, I can click in the areas affected by this problem and the police will change to what it should be but set in the right size once I have quit the field. I also see that some fields when filled will not be characters fat even if the police is set to a bold font.

  When a font of a field is set to Auto, Acrobat/Reader dynamically adjust the font size to match what is entered. When not using Acrobat/Reader to populate a field, it belongs to the program to properly set the font size based on the value of the field. Adobe does not publish any algorithm they use to determine the exact size (depending on the font used and the coordinates of field), so that a third party should use a better estimate (or not even trying at all), that looks like what is happening in your case. When you click within a field by using Acrobat/Reader, the font size is adjusted dynamically, but because the value of the field does not change, it is not defined when the field loses focus.

  A possible solution would be to use JavaScript to record all the field values, reset the form and then fill in the form using the saved values, this would cause Acrobat correctly define the appearances of field.

• How to mount the iso image on the ESXi Tech support console

  Hi friend

  How to mount the iso image on the ESXi Tech support console?

  I run the sub command and it failed.

  # mount o loop-t iso9660 vmware-esx-drivers-net-be2net_400.2.102.440.0-1vmw.2.17.249663.292682.iso / free

  editing: vmware-esx-drivers-net-be2net_400.2.102.440.0-1vmw.2.17.249663.292682.iso mounting on / open failed: no such device

  ESXi does not provide the option of mounting ISOs. You try to install the driver the driver Async package be2net / ISO. Follow the steps below

  (1) install VCLI
  (2) mount the ISO on the host where you installed vcli
  (3) use vihostupdate to install the driver
  vihostupdate-i b - servername
  He will ask for username and password of your host.

  Thank you
  Nithin

• The update of the BIOS for Satellite Pro M70 does support TPM?

  Hello

  There was an update of the bios that is specially designed for Vista... = bios-vista - 510win.zip on the Toshiba site...

  Although my Satellite Pro M70-113 did not support the default TPM module (BIOS verson 1.1, I always have this), is it possible that this update includes the TPM secure to enable bitlocker on vista?

  Can someone check and confirm please... :)

  And secondly, is configuration BIOS update for Windows utility saves the current state of the BIOS in some external as backup media, while if it happens with the process of update... the previous version can be restored in return?

  And a BIOS may be downgraded?

  Thank you.

  Hello

  (1.) I m not 100% sure but I think the new BIOS for the M70 does not support the TPM secure. I read somewhere that all BIOS versions that support TPM on Toshiba laptops cannot be updated by a common user, but the user must contact the authorized Toshiba service provider for these updates.
  That's why I think that Toshiba would not any BIOPS version by download issue if this BIOS would support the TPM.

  2.) now something about the second question:
  The new BIOS version replaces the old BIOS and BIOS States and to my knowledge it of not possible to save the settings for a backup more later.
  Generally, you must be careful with any update of the BIOS. Bad BIOS or bad update procedure may damage the jury!