the spam blocking

When online I am constantly redirected to Web sites, I don't want to go. (i.e. www.ansestry.com) I tried to block these sites by listing them in the section blocking of cookies in the privacy section, but that does not work. I would like to know how to stop being redirected without my permission.

Hello Xam, you have various present malicious addons. Please, try the following steps:

  1. Reset firefox (This wil keep your bookmarks and passwords)
  2. then go to firefox > addons > extensions and where there are still extensions listed there, disable them.
  3. Finally, run a full scan of your system with security tools like the free version of malwarebytes and adwcleaner to ensure that adware is not present in other parts of your system as well.

Fix Firefox problems caused by malicious software

Tags: Firefox

Similar Questions

  • all my emails are in the spam folder

    Hello

    I have a gmail account - all my emails received in gmail are categorized by mail as spam

    I disable the spam filter, but it keeps

    with other browsers (thunderbird), so good

    help needed please

    Pascal

    The brown color marked messages? If this isn't the case, Mail does not move it them.

  • I need to find the SPAM folder. How can I do?

    In order to retrieve information on some sites, I need my password. They send my password, but they tell me to check the spam folder. Where can I find the spam folder? Designated as spam messages do not appear in my Inbox to the ordinary letters.

    Thunderbird does not create a Spam folder. Your email provider may have a. Sign in to your account to your web e-mail providers site and see what you find there.

    Thunderbird junk term instead of Spam used to separate things. By default, Thunderbird places an unwanted icon next to what anyone, he considers undesirable and place in your Inbox unless you go into unnecessary controls and change this operation. Looks like you have not done this.

  • Where will the emails when you click them as 'not spam' in the spam folder?

    When an email in the spam folder and I click "not spam", where he's going, and how to get it back?

    Hey,.

    I have goggled this problem for you.

    According to AOL:

       "If you see a piece of email that is not spam, click the email, and then click This is Not Spam. The message will be automatically moved to your New or Inbox folder. You should then add that email address to your address book or your Custom Sender List (if you have one set up), so that future emails from this sender will not be sent to your Spam folder."
    

    Hope this helps you.

  • Can't find the email that I need to get back in the Spam report and not in the junk e-mail folder.

    I regularly get Spam Report emails in Mozilla Thunderbird, but I don't know how to retrieve those that I I want off that e-mail. I checked the spam folder, and they are not in. How do I find/recover these?

    I use a MacBook Pro, OSX 10.9.3 version

    Thank you!

    Thunderbird does not use the term Spam and I do not believe that it delivers any form of Spam report. It can receive one issued by your email provider. I sign in to your account to your web e-mail providers page and check their spam folder to see what is there.

  • The sign block no longer appears in the mail from my ISP (Java) application after the upgrade to the 25 version.

    Normally, the app displays three blocks, e-mail address, password and sign in. Since the 25 version goes, the connection block is no longer displayed. It is not a problem w / IE 9.0.21

    It does the same thing on a PC running Windows 7.

    Thanks for all your help. That was the problem (email HTML5 app uses).

     Using IE9 (ugh) as a work-around.  Hopefully a fix will be along shortly.  I heard Chrome has the same problem.
    
  • the blue blocks on screen and open to other sites.  any info?

    the blue blocks on screen and open to other sites.

    I'm sorry, but I don't know what you mean by "blue blocks.  You can take a screenshot of your browser window when this happens?  What websites you find it on?

    You take a screenshot by pressing Command + Shift + 3.

  • Fixing of the bad blocks

    In the earlier version of the operating system, if you had a few bad blocks on your hard drive you can use disk utility to erase the drive, check for bad blocks and somehow isolate these defective blocks to not be used.  El Capitan appears not have not not this as an option.  He do as standard?  Is there another way to isolate the bad blocks?

    The installation is redundant these days because modern disks are "SMART", which detects and remaps blocks without the OS X find out about it. Once defective begins reported to the level OS the drive has run out of 'reserve blocks' and it is likely to fail completely in the very near future.

    My advice would be to immediately back up and replace the drive.

    C.

  • Need help: invalid BS_jmpBoot in the boot block: 9a6c34

    Hello dear forum.

    I had Bootcamp for over a year now works completely well...

    But suddenly, it just doesn't work today gives me the invalid BS_jmpBoot error in the starting block: 9a6c34 when I tried to repair this volume.

    When I try to start on Windows, it just says not: no device bootbale - etc... Even when you press the options so that startup is happening does not appear the logo Windows press.

    I have absolutely no idea what to do now.

    I am currently running OSX 10.10.1 and 10 Windows (if it worked)

    Please help me!

    Thank you very much

    What year is your iMac? The upgrade of the El Capitan caused the problem?

  • How can I connect PC to the PID block when there is no block to HAVE?

    Hi, I've just started using NOR-FBUS (NI USB-8486 with Configurator OR 4.1)

    for my device configuration, there is only block AO, tuberculosis, RB and PID.

    Question 1.

    Can I manually set SP in the Configurator? If so, can you please tell me how?

    Questino 2.

    I tried to follow the tutorial in the manual, but I did not block of I... so how can I

    wire of my SP to the PID block?

    Much appreciated,

    Thank you

    Hello

    Have Weiwei VALUE should follow the change in TB after adjustment. But you couldn't change it manually.

    Here, I've prepared a PPT on how to create a PID loop.

    FOR INFO.

    Good luck.

  • Bad behavior of cancellation with the additional block end no OnNewStep

    Hello

    I'm working on StepTypes requiring a block structure, as loops in TestStand (using TestStand 2012). I use OnNewStep lower level to insert the end block no during the boot block is instantiated.

    I do not manage to get a good behavior of cancellation with it as follows:

    • If I do not use SequenceFile.IncChangeCount in OnNewStep stage, when I select Cancel in the sequence editor, the only stage of boot block is removed, the end block remains. My understanding is the expected behavior: motor TestStand don't know that the no end block has been added, she has no reason to remove it.
      However, I prefer to remove both start and end block as follows, as do with While TestStand, DoWhil or for loops.

    • If I do a SequenceFile.IncChangeCount in the OnNewStep stage, when I select Cancel in the sequence editor, I get the following error, and nothing is deleted or cancelled the sequence:

    I guess TestStand increments the ChangeCount when I insert a step, and OnNewStep also increment the ChangeCount, while the operation should be considered as a single action.

    I found in the documentation of the UndoStackclass with the method AggregateTopUndoItems method, I suppose, may be the solution. But UndoStack seems to be available only from ApplicationMgr and SequenceFileViewMgr (which are not accessible from the context of the sequence).

    Any idea to get similar behavior at the correct stage of control of native stream, with cancellations?

    Best regards

    Well, I found a solution by looking at what is happening in CommonFlow.cpp (\National Instruments\TestStand 2012\Components\StepTypes\FlowControl).

    For your information, here is the code:

    Insert a corresponding END step after step again
    ' public static void OnNewStepWithEndStepFunction (SequenceContextPtr & sequenceContext)
    {
    If (! sequenceContext-> sequence-> HasMismatchedBlocks)
    return;

    PropertyObjectFilePtr file = sequenceContext-> SequenceFile-> AsPropertyObjectFile();
    StepPtr endStep sequenceContext-> engine =-> NewStep ("", gEndStepTypeName);
    UndoItemCreatorPtr undoItemCreator sequenceContext-> engine =-> NewUndoItemCreator (EditKind_InsertStep, file, L"" ");

    undoItemCreator-> BeginEdit (endStep-> AsPropertyObject());
    sequenceContext-> sequence-> InsertStep (endStep, sequenceContext-> StepIndex + 1, sequenceContext-> StepGroup);
    undoItemCreator-> EndEdit();

    _variant_t ;
    endStep-> name = (char *) sequenceContext-> engine-> GetResourceString ("FLOW_CONTROL_STEPS", "END_DEF_STEP_NAME", "", &found);)

    file-> IncChangeCount();

    to do this, or the step type will not be displayed immediately as being used by the file
    file-> TypeUsageList-> AddUsedTypes (endStep-> AsPropertyObject());

    undoItemCreator-> CreateAndPostUndoItem (CreateUndoItemOption_NoOptions, TS::ApplicationSite_DefaultSite);
    }

    So the trick is to instantiate a UndoItemCreator that points to the current SequenceFIle, to call BeginEdit with, as an argument, the step to insert as PropertyObjetct, before calling the InsertStep method, then call the EndEdit method. Increment the file change, add the step as PropertyObject in the TypeUsedList file and finally call CreateAndPostUndoItem method.

    ... Happy!

  • How to send a nxt program labview in the mindstorm block

    Hello

    I would like to know how to send a writing of nxt program on labview in the mindstorm block for not using usb and bluetooth connection

    In order to start a program directly with the block

    Thanks for your your answer attentionand

    Hello

    National Instruments does not directly support the LEGO Mindstorms Nxt please refer to this KB see were you can ask for help.

  • DASYLab Lite, CompactDAQ Ethernet, "the stream blocked by a later module" error

    I receive the message 'the stream blocked by a later module' and then the execution stops. I tried to remove the modules without change. He usually stops 8 minutes, 20 seconds (500) in the race. It happened on two different computers (same network, however). How can I get my program to run longer (forever?)?

    I am using a cDAQ NI 9188 (CompactDAQ Ethernet chassis), NI 9237 (strain gauge module), NI 9211 (thermocouple module), OR-DAQmx 9.5.1 and DASYLab Lite 12.00.01. My program of DASYLab affect strips from 100 Hz sampling frequency. The calculation of the average (reduce) block performs an average arithmetic with the size of the interval of 100 and a block size of output of 1.

    Thank you!

    Which module complains about being blocked? Look at the title bar of the message - it should show the name.

    You can observe the locking by turning on pre-trial block view-Animation-FIFO.

    I am suspicious that average organizes blocks more were awarded.

    One thing to try and really monitor your computer after doing this...

    Go to the Options menu in the spreadsheet view, then open the General preferences. Change these two settings - see the image - turning them off. The risk is that your application uses too much memory, so, please, provide oversight.

  • No option to place the hierarchical block

    Hello world

    I bought NI Circuit Design Suite 14 - Student Edition. I am quite new to this program, so I wanted to work through a book in order to get some experience.

    Unfortunately, even in the first chapters that they refer to the hierarchical block function. I don't see this option. It is supposed to be in the "'place-> new hierarchical block" menu, but I do not have this entry. " Also I tried to customize my toolbar just to make sure that this feature is not disabled but I can't find any entry on this.

    I use the German version of Multisim 14 but I tried to change the language to English - there is still no menu available.

    For me, all of the features on this block herarchical lack (New, hierarchical block of the file, replace with hierarchical block). But the online help lists only these features as well.

    Is this some sort of restriction for the version of education? I wonder because the books I use offer a copy of the version of education as well, and they refer to this feature very often.

    I would apreciate any comment.

    Thank you

    Hey Stg86,

    This option exists in Multisim 14. This is a screenshot of my version of multisim, and as you can see, I have more options available in the menu of the Place. I changed the language to German, but this should not be the reason for the appearance of additional options.

    I think that this problem is related to the version or the installer of Multisim. Multisim is available in two versions: for academic users and industrial users. Some options are only available in one of the two versions.

    It's the version for industrial users:

    http://FTP.NI.com/evaluation/LabVIEW/ekit/other/Downloader/NI_Circuit_Design_Suite_14_0_downloader.e...

    It's the version for users of acadmic:

    http://FTP.NI.com/evaluation/LabVIEW/ekit/other/Downloader/NI_Circuit_Design_Suite_14_0_Education_do...

    Best regards, stephan

  • Forum of NOR is affected by the spam?

    Seems the forum Gets a lot of spam. Is there a moderator looking at it?

    Hi all

    We are aware of the spam problem and published to help prevent new attacks of spam filters in place.

    Please remember to report all spam see you a moderator by selecting Options > report to a moderator.

    Thank you for your patience.

    Jordan

Maybe you are looking for