The speakers click when the fan starts and stops Equium A100-147

I recently bought the 100-147 satellite and noticed that a click comes from the speakers (or headphones or external speakers) when the fan starts up and even when the fan stops. Sometimes it s quite remarkable, other times not so remarkable.

Everyone can hear that click? If it's normal, I can live with that, otherwise I will return it for repair. Any comment please?

In addition, it seems slow at startup and shut down. Put into service takes 2 minutes and 35 seconds, and stop to 33 seconds. Is this normal bearing in mind, it is running MCE? I have loaded additional software such as Itunes, Nero, Office 2000, Photoshop 5.0 etc.

Thank you for reading.

Clicking noise when the fan starts or stops turning is not uncommon. On my satellite a similar sound will appear when the fans begin to turn or the HARD disk starts to spin.
Then worry about don t, I think its OK.

The start-up procedure can take several times when a lot of applications and software to load at the beginning. Equium A100 seems to be one of the newer laptops, and I assume that different applications Toshiba load at the beginning.
Also an Antivirus applications could extend the startup procedure.

You might try testing something. Disable the antivirus of loading at the beginning and check if the laptop will start faster.

It s even with stops. All background processes that are run in the context of the operating system should be closed until the laptop shuts down completely.

Tags: Toshiba

Similar Questions

  • Under Vista, my fan starts and stops, makes a loud sound and the power light flashes

    My fan starts and stops, resembles a car reving his engine. The power led also flashes. Gateway gt

    * original title - my fan starts and stops, resembles a car reving his engine. The power light flashes too *.

    Hello

    If you have nothing on the screen, including a splash with logo screeen, etc, contact gateway if under warranty

    If it is under warranty, contact a local reputable computer repair workshop

  • Determine the range start and stop for a partition partition

    Hello

    Using oracle 11.2.0.3

    We use the interval of separation and the partition Lems auto-generated variety. intervbal (range-hash) 1 month

    So what can you manually check the table and see Beach start and end of the partition is it possible to request to see data dictionary
    the range satrt and stop wishing to have script to automatically rename the generated system partitions based on the involved for example range if the generated partition has max date value

    waoul 3062013 want PART_201306

    Thank you

    >
    Checked user_tab_partitions as have sql geneerator can get the names of partition, but does not see the partition a dstop ranges.
    >
    Range of scores have NO ranges 'start and stop '. They have a high value and identification of the position.

    Data with partition key values< the="" high="" value="" and="" greater="" than="" or="" equal="" to="" the="" 'high="" value'="" of="" the="" partition="" with="" the="" next="" lower="" 'position="" id'="" goes="" into="" that="">

    You have not yet described what you need 'start' and 'stop' for.

  • The music starts and stops again during playback of the CD

    buffering?

    I burned a cd of my playlist when I play the music cd starts then stops then restarts I'm guesssing it has something namely the buffering how to fix

    Hi mousey1,

    Thanks for the reply.

    ·         Are you able to play music burned in Windows Media Player correctly?

    ·         What is the size of the music files you burned?

    For your reference, you am providing these links.

    Disc burning: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/disc-burning-frequently-asked-questions

    Should which CD or DVD format I use?
    http://Windows.Microsoft.com/en-us/Windows7/which-CD-or-DVD-format-should-I-use

    Please provide us with more information so that we can help you in a much better way.

    Concerning
    Joel S
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Correct the pool start and stop procedures

    Hi all

    OK, so this weekend, we had an emergency at one of our sites, which demanded a full VDI / ESX stop and start a few hours later...

    Because it was an emergency, I had no time to study the correct procedures but that's what I did... can you guys please see if I did the right thing?

    The pool is a pool dedicated persistent linked clone.

    Stop:

    Logged in admin mode and turned off the pool and the value 'Remote Desktop power politics' "Power Off"...

    Off HA on the VDI cluster.

    Stop manually all the VDIs through the vi client.

    Put all hosts to stop then in maintenance mode.

    And then reverse the procedure for starting well enough...

    In addition to criticizing the closing / starting procedure, I have two questions

    (1) what does the 'Remote Desktop' political power' in fact? Aid integrated in explanation was really confusing...

    (2) when I activated the pool, the vdis all automatically powered... is this normal? I thought with a specialized pool, it would only turn on if the user attached to the vdi tried to connect to it?

    Thanks in advance for any guy replied:

    1: power policy determines what happens to a virtual machine, when a user ends their session.

    2: If your strategy has been set to ensure that all desktop computers stay on so I expect to come.

    See page 112 for depth of policy coverage, http://pubs.vmware.com/view-50/topic/com.vmware.ICbase/PDF/view-50-administration.pdf

  • Control buttons do not work after the new installation OS on Equium A100-147

    After Installing Win XP manually, I am facing problem for the multimedia keys on the left side of the laptop work.

    I am able to access the first button to launch Internet Explorer and Windows Media Player but still keys Play/Stop / > /.< not="" working="" with="" windows="" media="">

    I read in these forums that these keys work only with WinDVD or Windows Media Player with CD/DVD in. But I was able to use these keys with MP3 files in Windows Media Player.

    I don't want to use the restore CD.

    Thanks for your reply.

    Hello

    Of course you can use it with mp3 files. The files are probably listed in the WMP library, and you can use all of the buttons. There is nothing unusual.

    If you cannot use all those buttons in WMP when music CD is in the drive or you if the WMP library is open I recommend you remove TOSHIBA controls reboot the device and install again. Maybe it will work again.

  • After the BIOS does not update Equium A100-147

    Can someone help me please?

    Updated my BIOS as recommended it using the windows tool! Everything went through fine, saved, verified and flashed the new version. After restarting auto as my laptop does not start before the Toshiba screen, press F12 and nothing, F2 and I just get PLEASE PATIENTER. Guess I didn't try Visa or in fact any OS now.

    Why oh why I did it? Everything was fine before, but advises him to do for full compatibility. Do I need a new Board of directors or is there a key, I can press on to able me to boot from CD to reflash or return to old BIOS?

    Help, please!

    I always say: do not touch the system running well!

    Anyway, in your case, something goes wrong with the BIOS update and you need to go service authorized in your country. They can help you. Sorry but there is nothing that you can do it alone. The BIOS feature is a very sensitive matter and if the BIOS chip is faulty now you can do nothing to make it work again.

    I'm sorry. :(

  • I can't install the driver of Ethernet for Equium A100-147 tower controller

    I have downloaded the driver from Toshiba Web site LAN, but it does not work on my computer laptop Satellite A100-147 (PSAABE).

    What will I do to fix this?

    Can you explain exactly why his does not work?

    The driver gives an error during installation?
    The driver will install ok, but the LAN does not work?
    You get a BSOD?

  • Problem with the Apple start and stop music

    s everyone having problems with Apple music constantly stop and start today?  It is on my PC and iPhone.

    What is your internet connection?

    Apple's music is a streaming service, so unless you download the files on the device, you can find that the network has a great impact on read performance.

    See if others agree there could be problems at the end of Apple, but the status page of the system does not recognize the defects of these last...

    https://www.Apple.com/support/SystemStatus/

  • Re: Satellite C660 - fan starts then stops

    Hello

    Sorry for my English, I'm French, I have a Toshiba Satellite C660 laptop a few days ago and I noticed that the fan starts and stops every minute at any time when the temperature exceeds about 40 degrees (noted with SpeedFan).
    Even if I'm just the desktop, the Internet. However, it does not heat up much. Is this normal?

    Before I had a laptop and the fan stops, but almost never had low-noise. I prefer it, but it's can be a simple matter of habit for the Toshiba...?

    Hello

    Try it please change cooling method option in the advanced power settings.

    Open power options > n a click your power profile that you use > choose the advanced power options > Toshiba Power Saver Settings > cooling method > change two optimized battery options.

    I think that this will reduce fan activity.

    Please test and send feedback.

  • How to stop the EN icon appear in Windows 7 Pro to start and stop

    I have a language loaded on my computer.  Whenever the computer starts and stops at the icon IN displayed on the screen.  I looked in the obvious places like Start > Control Panel > clock, language and region, for a possible solution for this turn.  The language toolbar is turned off and is not reduced to a minimum or displayed anywhere.

    How can I prevent the EN icon appears?

    Thanks Omnicore you snapped.

    I don't know if that has an effect, but under keyboards, I got two installed?  The keyboard for the United States and the other for the United Kingdom.  I deleted the one for US as I am in England, applies the settings and rebooted the system.  The stop screen does not display the icon of EN, but on the home screen icon EN reappeared.

    So I applied the settings of copy on the administration tab, and after the system restarts, it erased the EN icon on hospitality and the stop of the screens.

    I appreciate you taking the time and allows you to reconfigure your computer to solve this problem for me.

  • Satellite A100-998: Audio of abandonment/glitch when CPU fan starts / stops

    Hi, I have had some problems with my streaming audio, as well as the inputs and outputs. I have read several posts on these forums of users who have the same problems, but the positions were closed without a resolution on an appropriate fix. These posts are also more than 1 year.

    The problem is that I'm an audio glitch when the cpu fan starts and stops. I updated to the latest version of the bios and installed all the latest audio, display and network drivers. and the problem is still there.

    I was my latency of the surveillance system and stop systematically various devices to try to locate the cause, but the problem still persists.

    Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly elimiating the seeds. I think that this is not an appropriate solution.

    As all other forum threads have been closed for more than a year, can anyone help me with a solution to this problem.

    Thank you.

    > Previous discussions of the forum on this subject suggest we find a solution by changing drivers processor ACPI to standard PC that will, among other undesirable things, keep the fan on constantly eliminating glitches. I think that this is not an appropriate solution

    As you know, it is only a user forum and you won't encounter technicians Toshiba here. This is why the solutions posted above was provided by individual users and may be true, but who knows if it would satisfy every user unique is only an idea and suggestion.
    I think you should communicate with ASP in your country for a notebook check possibly technicians could provide another solution that would suit everyone

    Greetings and good luck guy

  • Satellite A110-180 - fan starts but stops after a few seconds

    Hello

    I have a Toshiba Satellite A110-180 and when I turn on the computer, the fan turns on but it stops in a few seconds and starts again in a while and stops again and starts... Then the laptop gets heat quickly.

    I bought the laptop about 5 years ago, so I think the problem is the fan or the circuit that controls the fan. Can someone who has had the same problem make sure that the fan is the problem?

    The fan part number is ATZHG000500. Does anyone know if a fan with P/N ATZHG000100 is compatible with my laptop, or if I can use another fan?

    Thanks for your help,

    Hey Wiley,

    First of all it of normal that the fan starts and after a few seconds, or 1 minute stops. Depending on the programs you run again the departure of fan after a few seconds or minutes. So, theoretically, it of normal what is happening.

    But if your laptop is almost 5 years old, you should try to clean. So I can recommend jet of compressed air. This could blow out the dust from the cooling fans. It is very cheap but very useful.
    Check it!

    In addition, I think that the thermal paste should be renewed a technicians authorized laptop can help you and answer if the other fan part number fits in your laptop. :)

  • Satellite A200-1FL: cooler starts and stops every minute only with battery

    Hello.

    I just bought an A200-1FL and I test these days. I noticed that the cooler starts and stops every minute about when I use it only with the battery.

    Disconnected from the power, even if I do not have too much, just browse the Internet. Is this normal?

    If I work with trendy food, the cooler makes no noise.

    Thank you.

    David

    Hello David

    Do you also have it tested with different profiles in power options (balanced, power saver, high performance)?

  • Adding characters to start and stop in a text field?

    "For 1 d bar codes, there are two options according to the type of form to use. The forms you create in Acrobat (acroforms) can be set up to use a bar code with a standard text field. If you want to include the standard start and stop character (*) or a control character, you can use JavaScript to add them. The control character should be calculated, but that can be easily done with JavaScript. »

    How I go this. My current PDF form will make a first and last name on the form in a bar code format, but I have to add in * NML for the beginning and the other * end of the data that has been drawn from a SQL database.  example the pdf has a field named "borrower1_last_name" and who filed pulls the family name...  So I thought there should be an easy script as you say add to the properties of the field.

    post here now, because no one seems to be able to point me to the correct resourse on the reader forum.

    I answered your question last week: http://forums.adobe.com/message/4040845#4040845

    Note that the same script can be used in the event Format instead of the Validate event if you do not add the start and stop characters of the value of the field, but just what is displayed.

Maybe you are looking for