The speeds are horrible!  need help with the best settings.

Similar Questions

• Need help with the port forwarding for a XBox remote Streaming

  I have a router R6200v2 and need help with port forwarding.

  I came across this set of instructions for setting up stream port forwarding XBox remotely from anywhere

  http://kinkeadtech.com/2015/07/how-to-stream-Xbox-one-to-Windows-10-from-anywhere-with-Internet/

  I have no idea when it comes to such things and I want to make sure I do it correctly without messing up my existing home network.

  Port Forwarding and triggering Port pages setup look very different from what the guy uses. Can someone walk me through what I do to set up please?

  Hi @varxtis,

  You must enter them in the field for a start external Port and external completion Port. You will need to send individually except for the range of 49000-65000. The steps are as follows.

  1. create a Service name (it could be something else that you cannot use the same service name twice. Ex. XBOX1, XBOX2 and so forth.)

  2. Select the type of service (TCP, UDP or both)

  3 entry 5050 times a start external Port and external endpoints.

  4. Select the IP address of your XBOX.

  5. Select apply.

  6 do the same for other port numbers. To the beach, use 49000 for the external departure Port and for the external completion Port 65000.

  Kind regards

  Dexter

  The community team

• Need help with the blue screen issue "NAVEXI5. SYS, PAGE_FAULT_IN_NONPAGED_AREA ".

  Original title: need help with the blue screen issue
  My computer turns saying a blue screen: a problem has been detected and windows were shut down to prevent damage. The problem seems to be caused by the following file: NAVEXI5. SYS PAGE_FAULT_IN_NONPAGED_AREA he seems to have a different error whenever he turns to a blue screen. Can someone help me please.

  Hello
  

  1. Since when are you facing this problem?
  2. you remember to make changes to the system?
  3. do you get an error with this error code?

  I suggest to unplug external devices such as printer, scanner, etc. that are plugged into the system, and then restart the system and check if the problem persists.

  Method 1.
  I suggest you to do a check disk from the recovery console and check if the problem is resolved. Follow the steps mentioned below.
  a. start into the recovery console using the XP CD. Follow the steps mentioned in the article below.
  Description of the Windows XP Recovery Console for advanced users
  http://support.Microsoft.com/kb/314058
  b. perform a disk check.
  How to perform disk error checking in Windows XP
  http://support.Microsoft.com/kb/315265

  Method 2.
  I suggest you to start with the XP CD and then do a system restore. Follow the steps mentioned in the article below.
  How do I recover from a corrupted registry that prevents Windows XP startup
  http://support.Microsoft.com/kb/307545

  I hope this helps.

• Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI".

  Hello

  Need help with my Mail window. I can't export my message to the PST format. I keep getting the message error "an error occurred during initialization of MAPI". Y at - it solution or another method?

  Hi ErikLee,

  Do you have MS Outlook installed on your computer?

  Windows mail import and export opportunities are limited to an Outlook .pst file or an Exchange Server mailbox. They are available only if MS Outlook is installed.
  If MS Outlook is not installed and you start an import or export action, the necessary support files are not present for Windows mail complete the operation. Then I suggest you to install Outlook temporarily and see if the problem is resolved.

  Follow the instructions below and check if the problem is resolved.

  1. reboot your computer, and then start Windows Mail.
  2. on the Tools menu, click Options.
  3. in the connection tab, click on edit to open the Internet Properties dialog box.
  4. in the tab programs, click on an application other than Windows mail e-mail in the e-mail list. Click on apply and then click OK.
  5. click OK again to close the Options dialog box.
  6. exit Windows mail and restart Windows mail.

  If this does not work, I suggest you upgrade to Windows Live Mail to import or export messages that may help you resolve the issue.

  To download Windows Live Mail, visit the following Microsoft Web site:
  http://get.live.com/wlmail/overview

  For more information about Windows Live Mail, see the Microsoft Web site at the following address:
  http://windowshelp.Microsoft.com/Windows/en-us/help/4b30d3d6-abe2-46d1-a5fd-4a1ba786a1381033.mspx

  Check whether the problem is resolved.

  Please post back and let us know if it helped to solve your problem.

  Kind regards
  KarthiK TP

• Need help with the error of connection Internet "Reset local connection adapter".

  Original title: Need help with Internet connection.

  Hi, sometimes when I go to my office (HP 2009 m) I get a message that I am not connected to the internet (although I have no problem with the connection on my IPad).  When I click on solve internet connection Windows Network Diagnostics freezes when it gets to solve problems "the local connection adapter reset."   I have to turn off my computer by unplugging and then it works normally when she returns to the top. (Sorry if my explanation is difficult to decipher, I'm not very tech savvy) This could be the cause and how to fix it?  Thanks in advance.

  Well, I expected more of a response, but I'll wing it from here: your cable goes into a modem.  This modem can be a wireless modem/router, or simply a modem cable to your computer.

  Connection problem you might start by connecting the cable into the modem.  Ensure that it is well defined.  If everything looks good, then it is possible that there is a decline in cable service before he gets to the modem.  For example, the interface side of the House can be affected by a bad connection, for example water intrusion, or poor soil.  So you may want to check into that.  Then, there is always the possibility that your cable provider has lost his momentaily of transmission, and that the modem needs to be reset.  If this happens often, you must contact the cable provider.

  Modem, your computer can be connected by cable, so you will need to check how firmly the connection is.  Then, there is always the possibility that the modem is wrong.

  But if your connection is through a wireless modem/router, your connection may have lost because of a bad signal.  Once more..., the modem/router could go wrong.

  Edit has added:

  Looking back on what you said about the Ipad, I feel that you have a wireless modem/router.  It is possible that your connection to the desktop must be after you have used the Ipad.  For example, you may need to right-click on the monitor icon in the Systray to your desktop and open your network sharing Center.  Even if you can say that you are connected to the Internet, you may not.  Then... just ... simplement cliquer click on 'connect or disconnect', then find your network connection appropriate, right click on that and select disconnect, then immediately right-click the same but select Connect.

  
  

  Will be a new connection to the Internet.

• New user needs help with the creation of an animation :)

  Hello

  IM fairly new to all Adobe Premiere Pro Im using CS6 and need help with it.

  I want to make a video and add a scene that looks like the beginning of this video Sarah the movie - YouTube , to be exact - the animation at the location where you type your user name and password, I can do that in Adobe Premiere Pro? I want to do exactly the same animation and no idea of how do

  Would appreciate any help!

  There are several ways to do so.

  One way would be to create a title with the name and title with the password.  Add the crop effect to each and the keyframe as necessary. Adjust the size and position as desired.

• Hello, I need help with my photoshop, rececently the majority of my family disappeared merger options and I cant access AVC and other options ive tried reset preferences and it seems to come back but when I add an image and try add text again

  Hello, I need help with my photoshop, the majority of my family rececently disappeared options fusion and I can't access strokes and other options ive tried to reset the settings of preference and he seems to come back but when I add an image and you try to add text again, they'll only options I have are drop shadow , gradient, Chromakey, shine of satin overlay, inner (I use photoshop cc 2015) Please help, my Skype contact options are: RoblivionM8 and email:[email protected]

  Thanks for your time

  Your first screenshot shows the layer style dialog where not all types of effects are indicated on the left. Bottom left of the dialog box, you see a small icon fx with a menu arrow drop-down. Use drop down the menu and make sure all you click on show all effects or restore the default list. I don't know what you're trying the shoe on the second screen capture.

  

• Need help with the data storage store, local array and network connections

  Need help with my ESXi 4.1 installation

  My hardware:

  I built a server with an Asus P6T whitebox, i7 920, 12 Gig RAM, NIC, Intel Pro1000 PT Quad, 3ware 9650SE-12ML with 8 1.5 TB SATA green in a raid 6 array gives me about 8 + TB with a spare drive all housed within a NORCO RPC-4220 4U Rackmount Server chassis.  I also have a 500 GB SATA drive which will hold the ESXi and virtual machines.

  The network includes a firewall, Netgear Prosafe FVS336G, GS724Tv of Netgear ProSafe 24 port Gigabit Managed Switch on a dhcp cable modem internet service provider.

  I also have 2 old NetGear SC101T NAS disks (4to) I want to connect to the system how some - at a later date have... data on them and want to transfer to the new storage array. I always looking into the question of whether they will work with ESXi 4.1, or I might have to only access it through Windows XP.

  My Situation:

  I have already installed ESXi 4.1 and vsphere client with no problems and it is connected to a dhcp cable internet service.  I've set up host via a dynamic DNS service name give me a static hostname on the internet.  I installed three machines to virtual OS successfully at the moment and now want to first start by creating a multimedia storage server which will use some of this new 8 TB array, then separate data storage for use with a web server small overhead storage and a backup.  It is a domestic installation.

  Help with the data store and network:

  I was doing some reading, because I'm new to this, and it looks like I'll probably want to set up my table via ESXi as a nfs disk format.  Now, the data store is usually in another physical box from what I understand, but I put my readers and ESXi all in the same box.  I'm not sure that the best way to put in place with grouped network cards, but I want to make this work.

  I understand that in ESXi 4.1 using iSCSi LUN must be less than 2 TB, but nfs - I should be able to add a bigger partition then 2 TB (for my multimedia) in nfs, right? or should I still add it separately as a separate 2 TB drives and then extend them to get the biggest space.

  Any suggestions or direct resources showing examples on how to actually add some parts of the table as data warehouses separate nfs.  I know that to go to the configuration tab, and then select Add to storage, and then select nfs. I have not my picture, but it's here that I don't know what to do because ESXi 4.1 system already has an address, should I put the same thing to the new data store array also (will it work?), and what should I use for the name of the folder and the store of data... just do something to the top.  I thought to later install Openfiler (for a multimedia storage using this table server) as a virtual machine, use the table with esxi so that I can access the same storage space with widows and linux-based systems.

  I also know I have to find a way to better use my quad nic card... put in place of virtual switches, grouping, etc HELP?

  Any direction, assistance, similar facilities to sample, suggestions or resources that would help would be great. I did a lot of hunting, but still a little confused on how to best to put in place.

  You must think of VMDK files of large databases with records of random size guest go read some data (a DLL or an INI file), maybe write some data back, then go read other data. Some files are tiny, but certain DLLs are several megabytes. It's random i/o all and heavy on the search time. IO Opsys is small random operations that are often sequential (go read data, write data, go read other data,...) so that deadlines are critical to the overall performance. That's why people say OPS are / s of reference and forget the MBs flow. The only time where you bulk transfers are when you read media (ISO files).

  Well, now forget all this. Actually the disk activity will depend on the specific applications (database? mail server? machines compiler?), but the above is true for boots, and whenever applications are idle. You should see the profile to know.

  RAID 10 is faster (and often more reliable) than RAID 5 or RAID-6 except in certain specific cases. In General RAID 10 is ideal for many random writes, since the calculation of parity for RAID-5 and - 6 adds to the overall latency between command and response - latency is cumulative if a little slow here and a little slow it adds up to a lot of overall slow synchronous especially with e/s on a network. OTOH RAID-5 and -6 can produce faster readings due to the number of heads, so you can use it for virtual machines that transfer bulk. Test. You may find that you need several different types subdashboards for best results.

  You said 3ware, they have some good grades on their site, but don't believe it. With my 9650 that I found myself with only a couple of their recommendations-, I put the (simple) table for allocation size 256 k, nr_requests at 2 x the queue_depth and use the planner date limit. I had the habit for the Ext4 file system formatted with stride and stripe-width synced to the table and used the options large_files with fewer inodes (do not use the huge_files option unless you plan to have single VMDK files in the terabyte range). Use a cache of great reading in advance.

  Virtual machines use VMDK files in all cases except raw iSCSI LUN that they treat native disks. VMDK is easier to manage - you can make a backup by copying the file, you can move it to a PC and load it into another flavour of VMware, etc. There could be some features iSCSI to your San as a transparent migration but nothing for me. NFS has less chatter of Protocol if latency lower times to complete an operation. NFS is good to read and write a block of data, that's all it boils down to.

  UPS is good, but it won't help if something inside the machine explodes (UPS does nothing if the PC power supply goes down). If the RAID card has an option for a battery backup module, so it can contain some writings in memory and may end up the disk i/o after replacing the power supply. 3ware also limits the types of caching available if help is not installed, and you get just the right numbers with the module.

• Making the ear of corn and need help with the ball.

  I do some corn on the COB for an illustration and I need help with the texture of the ball. I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all. I tried to recreate it in a rectangle by using the option in the menu object (1 row, 50 columns) gradient mesh and I'm trying with the fusion in object mode, but not lucky yet. Can someone help to put me on the right track to make the texture:

  

  

  

  I've been slowly making progress with gradient for kernels mesh, but I can't seem to recreate the look of the ball at all.

  Tank,

  You have published three images stylistically very different. The first is photographic and call probably (but not necessarily) for graduates of mesh. The other two are graphical treatments (and frankly, they're both rather flat; lack of depth).

  Illustration style extends the range of cartoonish in sketchy photo-realism and all the rest. The problem is you didn't show your own attempt so that anyone can have an idea of what you're trying to achieve the stylistic point of view.

  I just need to put in place so that the final step does not appear the whole box. The problem now is trying to make the style of the good brush to reproduce the effect...

  You seem to think you have to build a kind of linear construction and then find a way to reshape the shape of each part of the leaf. Yes, you pouvez approach it this way, but Illustrator users has often tend to be what aunt Molly would call "too clever by half."

  Not everything must be something semi intelligent auto or complex and tedious consruct involving brushes, envelopes, masks, etc, etc. Much can be accomplished by thinking that he just thanks to measure you draw directly economic paths and constructions, which take no more time (often less) and result in very tidy, simple files. Again, a lot depends on what you are trying to achieve the stylistic point of view. But here's an example that only took a few minutes to draw:

  

  

  

  

  

  If the above consists of:

  Three roads closed, 8 points each, with ordinary linear degrees

  Three mixtures of open path with three anchor points for each key path

  Six paths closed for shadows / highlights, with 19 points in total

  Mixtures being directly from the paths drawn comic forms, the spacing of the veins 'automatically' and intuitively follows the width from point of view of the worksheet.

  Rather than to build a boilerplate brush, colouring and the weight of each of the three main paths of the vein mixtures can be set individually at any time, simply directly by selecting the key path.

  JET

• Need help with auto-fill the fields

  Hello

  I need help with a form that has multiple pages.  I have some areas I are duplicated in my document.  How I got these fields auto fill throughout the form/paper? For example, I'm going to fname lname, address, telephone, etc... How can I get these fields automatically on the other pages of the form?  Is this possible?  Any suggestions are welcome.

  Thank you in advance.

  If it's just a fill operation then make sure the fields have the same name. Then set the binding to the global level and all the fields with the same name will get the same value.

  Paul

• Need help with the installation of an adapter of Palit GeForce 9500GT Super chart - 512 MB in a M2N68 (narrated

  Need help with the installation of an adapter of graphics Super Palit GeForce 9500GT - 512 MB - DDR2 SDRAM in a M2N68 motherboard (narra6). Should I disable the onboard graphics in the bios? When the card is installed, no VGA work outs and the PC does not start. Checked and recontroler implementation of the card in the PCI slot. PC is a desktop HP G5200uk PC. Windows 7 operating system.

  Hello

  The link below is a guige to install a video card in your Pc.  In particular, it seems that you will have to perhaps specify the location of the new card in the bios and save this change before you install the new card - see step 4 in the guide on the link below.  If your new card fits into the PCI Express x 16 slot, you will need to define PCI Express in the bios and save the changes.

  http://support.HP.com/us-en/document/c01700855

  Kind regards

  DP - K

• I need help with the program of Photos on my macbook pro

  I use a Macbook Pro with OS of Yosemite. I really need help with the Photo program. I never really got the hang of IPhoto and now that it's a new program, I'm really confused. Where can I go to learn this without waiting for the next workshop in a local store?

  Hi, I'm fighting to open same mine, making a new software update

• Need help with the launching track pack for forza code 4

  Bought new Forza 4 and the lancer Track Pack code does not work, how do I get a code that is generated in the form I've already paid for it. Rank of loads of numbers and sent 10 s of emails but cant seem to get help.
  
  This is the help I get when the cat to an Ambassador xbox on xbox.com
  
  Terry wrote:
  Need help with the launching track pack for forza code 4
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Location of Ambassador of the community...
  The Xbox Ambassador says:
  Your question will be answered by an Ambassador of the Xbox. You have been connected to the Ambassador as a user Xbox [3]
  The Xbox Ambassador says:
  Hello
  Terry wrote:
  Hello
  The Xbox Ambassador says:
  Hey
  Terry wrote:
  just to be on the phone to xbox live support and was told to come here
  The Xbox Ambassador says:
  ok\
  The Xbox Ambassador says:
  What is your problem?
  Terry wrote:
  I bought the 4 for forza ansd 360 new sealed Christmas...
  Terry wrote:
  has got 2 codes that accompanies the game but the pack track code does not work
  The Xbox Ambassador says:
  Wow good
  Terry wrote:
  whenever I put in the code it says code redeemed
  The Xbox Ambassador says:
  I think the code is used. You must return to the retailer
  Terry wrote:
  I tried to, but since I already opened the case they will not accept
  The Xbox Ambassador says:
  Oh. No,
  Terry wrote:
  the code had been used or defective as I am the only person who has touched the game once opened, tried to enter the code when it is open
  The Xbox Ambassador says:
  Maybe it was auto bought?
  Terry wrote:
  so, how do I get another code generated track Pack if defective?
  The Xbox Ambassador says:
  I do not know.
  Terry wrote:
  bought the game new, so I get the track pack
  The Xbox Ambassador says:
  Oh. It's bad.
  The Xbox Ambassador says:
  I think that if you Exchange 1 code it will buy it
  Terry wrote:
  car pack code worked, starter pack did not work
  The Xbox Ambassador says:
  Oh.
  The Xbox Ambassador says:
  It's a bad
  The Xbox Ambassador says:
  BTW you have an evolution of the tests?
  Terry wrote:
  Yes, I want to? but more anxious to get a code object generated for this pack
  The Xbox Ambassador says:
  Hey if I help can u give me this game too?
  Terry wrote:
  ?????????????????
  Terry wrote:
  So is it possible to get a code for that time?
  The Xbox Ambassador says:
  Hey
  The Xbox Ambassador says:
  Yes.
  The Xbox Ambassador says:
  you need to contact them
  The Xbox Ambassador says:
  and tell them that the code is used.
  Terry wrote:
  I was told to come here? where can I go to get the code?

  Hi Terryg76,

  ·         What version of the operating system is installed on the computer?

  I suggest you to contact the game manufacturer for more help and information.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Try to install Service Pack 2 for Windows Vista and it says this "one or more system components that require the service pack are missing" need help?

  Hi, Mksethompson,

  What is your model of computer?

  Error message when you try to install Windows Vista Service Pack 2: "one or more system components that require the service pack are missing."

  http://support.Microsoft.com/kb/968279

  Dell issue

  http://en.community.Dell.com/support-forums/software-OS/f/3524/t/19278096.aspx