The State of my Internet connection is not available

Similar Questions

• delete a block - my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available.

  When you use the internet, my virus detector asked if I would allow google chrome to download a newer version. I clicked on the decline, and then my internet has stopped working. I finally got back on, but now my computer won't let me use google chrome as a browser. It indicates that the internet connection is not available. I was able to use other browsers, but not Google. I tried disabling my firewall to see if it would work then, but it still doesn't work. Any suggestions? I'm afraid, that I blocked it somehow. Thank you!!

  Hello

  I suggest you post your question in the Google Chrome forums here: http://www.google.com/support/forum

  This looks like a problem with this specific program and not with Windows. I hope this helps!

• On the Satellite A100-784 Internet connection does not work

  I use a Satellite A100-784 with Vista Home Basic and a US Robotics router. My question/problem is that when I discover the network connection, it shows I am connected to the router, but not to the internet even though I am.

  It is a quirk of the Vista operating system or is it normal if you use a router? Should I worry or not?

  Thank you all in advance and my apologies for the newbie question.

  Each router must be configured and the right data ISP (internet service provider) must be inserted.

  -Don't configure you the router?
  -How about the TCP/IP settings? All the settings are set to automatic?
  -How about firewalls? Have you used one or you turn it?
  -Have you tested different browsers?

  Please check the points above.

• screen shows the internet connection is not available

  When I check internet Tools tab connections, I see there is no internet provider in box, so I reinstall my internet provider and I can access it for a few minutes or a few hours, then suddenly the connection disappears with any internet provider that I have loaded.

  I deleted just a virus would it have affected it.

  Hello

  Depending on how your system is configured and the connection to the Internet, in most cases there is no entry in the Internet Explorer Logon box.

  Many times after cleaning a Virus, this may be the problem.

  Give it a try, or describe, in technical terms, your computer/Internet System.

  http://www.hotComm.com/FAQ/FAQ_ResetWinsock.asp

  Jack, MVP-Networking. WWW.EZLAN.NET

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• Can not connect to the server. My internet connections has always been. What is the problem.

  I have never been able to use creative application of cloud, I have to reinstall every time go. The question is always, it says can not connect to the server. My internet connections has always been. What is the problem.

  
  

  Thank you

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  https://helpx.Adobe.com/x-productkb/policy-pricing/activation-network-issues.html

• P850 satellite and a WiFi - internet connection does not work well

  Hello

  My internet connection does not work with a Wi - Fi connection.
  I have laptop Satellite P850-131, which I bought a few months ago and I noticed that over the past two months the internet connection does not work well. When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  I tried to do all the regular search but nothing works. Sometimes the message I get told that there is a problem with the DNS and other times with the IP address. However, with other computers I didn't have any problem at all to connect to the same Wi-Fis.

  All solutions?

  > When I connect to the computer shows that I am connected Wi - Fi connections, however there is no connection and I can't access the internet.

  If such a problem would appear again start the console (window BACK in typing CMS in search)
  Here, use the command * ipconfig / renew *.

• Netflix in Media Center returns a 'there was a problem of data recovery. "Check the works of your internet connection and try again" error instead of loading Netflix data.

  context: a previous thread with an identical title never responded, the problem just disappeared.  Well its been two weeks since then and the problem came back.

  somethings which may or may not apply: internet TV seems to work better in media center.  All updates have been applied to H.P. of Vista SP2. Netflix works fine in ie8 (such as the internet, of course). Tried to delete all the Internet Options, delete browsing history section of Internet Explorer. I get the same error message with my windows 7 professional media center, but netflix seems to play anyway (no game with vista). I recently installed quicktime alternative 2.72 to see what it was and how it worked, then removed and put back in quicktime.

  Tried / symptoms:

  -Remove all the browsing history (econcepts)
  -Same message on Win7pro but works even when (econcepts)
  -Works on Win7 no problem (omegafiler)
  -Works in ie 8 (econcepts)
  -Works in crome (Martin TX)
  -Consensus is that it started around December 30, 2009 (GeoffG1, johnetX, me)
  -Remove and reinstall silverlight (omegafiler)
  -Remove and replace netflix plugin (omegafiler)<- how="" did="" you="" do="" that="">
  -Netflix says: microsoft problem (Nitestalker)
  -Microsoft is silent (this thread - on vacation?)
  -Same problem on 32-bit and 64-bit VMC (JRSMiamiFL)
  -No applied update (johnetx)<- perhaps="" date="" related="" or="" drm="" date="">
  -Disconnect from netflix, you reconnect again - ultimately the same error (chicagokiwi)
  -Tried to reduce the number of items in the queues to well below the limit of 200 (econcepts)
  -Tried the register / unregister the third wire procedure, no joy (does not break anything else however)
  -Disabled the firewall, no change (econcepts)

  related topics:
  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/0c154c0a-1fcb-4353-8c5e-b394e885256d

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/aaab24a0-4BB9-42FA-a5ee-46a733d6560f

  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

  Someone else knows Netflix not being is not able to connect?  It started yesterday (30/12/2009) for me.  I looked fine the day before without problem.  The message I get says "there was a problem of data recovery.  Check the works of your internet connection and try again. Ok.  I make it work with both my VMC - one with the service pack and the other without.  My OS updates have been loaded in early December, so I don't see how this could it be.  I searched and found this problem has come up before, but I have not found a solution.  I made NO changes to my HTPC.

  Those who have and solved this problem.

  UPDATE UPDATE UPDATE UPDATE UPDATE UPDATE *.

  2009-01-05 has attempted to start Netflix this morning and you know, it works on both my VMCs.  That's the good news.  So now the real questions are:

  Only 20 people reported it as a problem and only 6 on the green button.  I believe that it affected all the world with Media Center.  So why not discussed much?

  It already happened, causes a stir and silently slips without known cause or cure.  How can we find out what caused this and how to prevent it from happening again in the future?

  *******************************************************************************************

• Failed to load movies Netflix in Media Center message appears to indicate there was a problem of data recovery. Check the works of your internet connection and try again.

  Original title: cannot load Netflix movies in Media Center

  Netflix photo click on the message appears indicating a problem of data recovery.  Check the works of your internet connection and try again.

  Hi Barbarasimonetti,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  Method 1: You can follow the steps described in the article below

  Known issues and limitations of Netflix on Windows Media Center for Windows Vista

  http://support.Microsoft.com/kb/972496

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************

• I can connect to my wireless router, but cannot get internet connectivity via Wireless. If I connect the cable to the port on the router, I get internet connectivity.

  Wireless router / Internet problems

  I am running Windows Vista Home Edition with Security Essentials.  I can connect to my wireless router, but cannot get internet connectivity via Wireless.  If I connect the cable to the port on the router, I get internet connectivity.  Is there a firewall setting that could cause this problem?

  Hello

  Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
  Update your WiFi drivers on computers. How you are positioned in the router? Are there
  obstacles in the path?

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  markn32062458 wrote:

  in the trial version that I wanted to try "photomerge" like on the video statement (via the expert mode, etc.). Is not available in the trial version?

  In PSE14, Photomerge has been moved to the 'guided changes' rather than the Expert mode.

  You can still access the same way in the Organizer: Edit menu > Photomerge.

• Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hello

  Need help desperate please

  Just purchased lightroom 6 boxed version, try installing and the display shows 'no internet connection' when in fact my connection is good

  Hi TomasB,

  Please reset the file browser & Internet hosts.

  Reset Internet Browser refer: change or reset the settings of Internet Explorer - Windows help

  • Close all windows of Internet Explorer that are currently open.
  • Open the office and then tap or click the Internet Explorer icon on the taskbar. Change your settings will affect Internet Explorer and Internet Explorer for the office.
  • Press or click the Tools button and then tap or click on Internet options.
  • Press or click on the Advanced tab, and then tap or click Reset.
  • In the reset Internet Explorer settings dialog, tap or click Reset.
  • When Internet Explorer has finished the application default settings, press or click on close and then press or click OK. You will need to restart your PC for these changes to take effect.

  Reset the hosts file

  Reference: https://support.microsoft.com/en-us/kb/972034

  Mac: How do I edit the file Hosts on Mac OS X - TekRevue

  Reference: Solutions to connection errors, activation and connection with Creative Suite and creative Cloud applications.

  Let us know if it helps.

  Kind regards

  ~ Mohit

• Error code 797: connection is not available because there is a problem with your network card or modem

  I have a Windows 7 laptop. I use broadband (DSL) to connect to the internet. Lately, I have an error with the code 797. It says connection is not available because there is a problem with your modem or network card. I have a Sony Vaio e series laptop.

  Hi Muffakham,

  Thanks for posting your question in the Microsoft Community forums.

  I see from the description of the problem that you are unable to connect to the Internet and receive "Error Code 797 connection is not available because there is a problem with your network card or modem".

  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.

  To provide the proper resolution, that I would need more information on your side.
  Did you the latest changes on the computer before this problem?

  This problem may occur because of damaged or incompatible, drivers connection settings incorrect network, hardware or software problems and missing updates.

  Method 1:
  I suggest you try the procedure described in the article and see if it helps.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Method 2:
  If the problem is not resolved, I suggest you try the procedure described in the article and see if it helps.

  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Check out the link for more information.

  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet

  Let us know the status of the issue after you perform the troubleshooting steps. If you need information about the problem with the connection to the Internet or get help, I'll be happy to help you. We, at tender Microsoft to excellence.

• When I try to connect to wifi, it shows this connection is not available.

  OT: problem with wifi.

  I use a fujitsu laptop computer lh532 and my OS is Windows 8 pro. I can't connect to wifi but it displays connection available. When I try to connect to wifi, it shows this connection is not available. I also try to re install the driver wifi. but the problem is still on. What can I do now?

  Hi Francois,.

  Thanks for the reply.

  Thank you to try the following steps to solve the problem of troubleshooting.

  I need more information this problem so that I can help you better.

  1. Have you followed the steps I provided in the previous answer?

  I suggest you follow the methods mentioned below and check.

  Method 1. If you use a laptop, then I suggest you to check the key wireless keyboard that is on or not.

  Method 2 Try to reset the command netsh winsock via the command prompt.

  1. press Windows + X key and right click on command prompt (which must be run as administrator).
  2. Type "netsh winsock reset" and press enter (without the quotes).
  3. now restart the system.

  Try to follow these methods and response with the State of the question so that we can better help you.

  Thank you.