The strange hardware driver

Hello

Wenn, I'm looking for 32-bit drivers for windows 7 for a Satellite A210-103 PSAELE I can find "Hardware Setup" to "this tool allows you to customize the settings of your hardware, depending on how you work with your computer and the devices you use" when I select the model number short 'All' or "PSAFGE" but not for 'PSAELE' or «PSAEGE» The specification describes driver this driver for models "Satego A210, Satellite A210, Equium A210, Satellite Pro A210" (no restrictions):
http://UK.computers.Toshiba-Europe.com/innovation/windows7_drivers.jsp?macId=&LNG=1&mode=allMachines & userOS = & action = search & SelCategorie = 2 & selFamily = 2 & s = 153 elSeries & selProduct = 770 & selShortMod = 1 & selOS = 29 & selType = all & country = 8 & language = 13 & searc h =

Anyone know what this driver does with equipment and experiments with the short model has not. PSAELE.

John

Jin

I don't find something special in the hardware configuration utility. It's just a utility that allows you to set some parameters as:

1 select boot priority
2 en/disable usb legacy support
3 turn the lighting
4 en/disable the wake on the keyboard
5 settings button
and a few other options.

Tags: Toshiba

Similar Questions

  • Tecra A10 does'nt recognize 2nd HARD drive in the Bay of the STRANGE

    Hello

    My TECRA A10 - 1 HG PTSB1E does'nt recognize my second HDD that has taken the place of the cd-rom.
    I use a SATA caddy and the boot of the A10 with a CD-rom error!
    is it not possible to use a shopping cart with a TECRA A10?
    Does anyone have a solution?

    Thank you for your experience of return.
    Best regards

    Hello

    I guess that the Tecra A10 does not support these updates.
    The 2nd SATA controller does not seem to support the additional HDD instead of ODD.

    But I've read a few things to get such2nd as recognized HARD drive.
    You must start the laptop without the HARD drive caddy in ODD Bay.
    After that the Windows system has started, you can plug/connect the HARD drive caddy and system PnP service should recognize the new device.

    I think this isn't the best solution, but it seems like it s the only way to get this HDD caddy recognized in the Bay of the STRANGE

  • the hardware driver installation issue digital unsignature

    Hello

    I have a material. He worked and I could install the driver of this material. But after 3 mouth I tryied to install this equipment on the other system, but I got error and windows will not let me install this driver

    error: the third-party INF does not provide digital signature information.

    I'm sure of this driver and hardware. I think it happened after some Windows update.

    Now, I'm looking for a way to tell the operating system to install this driver anway.

    Thank you

    1. In the "Control Panel", select 'System' and then select the tab "hardware".
    2. Click ' driver signing ' to bring up the dialog box "driver signing Options".
    3. Select "warn - display a message before installing an unsigned file.
      If you are an administrator, you have the choice to choose 'Apply default system'
    4. Click 'OK' and then click on the button "Device Manager."
    5. Right click on the device and select "Update Driver".
    6. Automatically install

    Rather than the above error message is a warning that the driver is not signed. Select 'Yes' to install anyway.

  • Windows cannot initialize the device of this hardware driver. (Code 37)

    Windows cannot initialize the device of this hardware driver. (Code 37)
    There is no upper or lower filters in reg.
    external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
    How do I solve this problem

    Hello Rajendra Aagarwal,

    Thank you to contact the community Microsoft and we will be happy to help you with your concern.

    According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

    Method 1: Run the Fixit and check

    Hardware devices do not work or are not detected in Windows (Fixit)

    Method 2: Check the steps to get the 37 error code

    Explanation of error codes generated by Device Manager in Windows XP Professional 

    Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

    Good day!

    Hope this information helps.

  • Unable to start my laptop, error: an unexpected error has occurred. Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

    When I tried to boot my Toshiba laptop, I get the message that unexpected error occurred.  Defective hardware such as a hard drive or the CD-Rom drive which is a failure. Status: 0xc00000e9

    \windows\system32\ntkrnlpa.exe file status: 0xc0000098

    Windows failed to load because the kernel is missing or currupt

    My computer did not come with an installation disc.  Best Buy has it

    I need my laptop, can anyone help.

    You download and make the disks to another computer.

    If you continue to have problems to take your machine to a repair shop.

  • Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

    Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

    Here's the situation.

    I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

    I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

    Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

    Thank you in advance!

    Maybe not...

    The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

    I looked at your system and found this article that you can read to see if it sounds like your original question:

    Windows Setup could not configure Windows on hardware on this computer.

    http://www.Dell.com/support/article/us/en/19/SLN293812/en

    Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

    Could you take the issue in the Dell online community where experts hang out (especially your amber light).

    Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

    http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

    The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

    If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

  • The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server?

    I am running Windows 7 Pro 64-bit in a dish netwrok with no announcement. I can map drives on the server without any problems and everything seems fine. Then after a few hours it seems to lose the mapping on the drive. There are two mapping drives and he loses a. It will show in my computer as being mapped, but you cannot access it. You can connect to the mapped drive on bringing the command run and typing in the UNC path in.

    The strange thing is that, when you go and try to remap the drive, it shows that the drive letter is mapped to a different drive used to be shared on the server? Once you tell to remap things in car are fine for a few hours.

    My question is where and why it does this?

    Thoughts?

    Thank you

    Tom

    Hello

    The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

    http://social.technet.Microsoft.com/forums/en/category/w7itpro/

    Hope this information is useful.

  • When I plug my new Seagate Free Agent Desk GoFlex external drive, I get an error message saying that Windows does not recognize the hardware. I'm stuck and need help to install the external hard drive.

    My problem is that the software is supposed to be on the disk but I do not see the player to download. I tried to download the Seagate Manager, but it shows no available disks. Any help will be most appreciated.

    Also, I tried to install the external hard drive on a Windows Vista 64-bit computer and a Windows 7 Home Premium 64-bit.  Same result on both.

    Hello

    I suggest you try to run this under fixit and check if it helps:

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

    It will be useful.

  • ScanJet g4010: do not install scanjet following usb and usb-hardware driver issue?

    Hello

    I tried to install the scan of a brand new computer and encountered the following problem:

    I downloaded the package of appropriate software (full software and driver) from HP Web site, I start to install and get a message after the first stage (verification of the system requirements). the specific question that the system doesn't have the support of USB-required to complete software installation USB + same question regarding the USB hardware...

    strange because it is a whole new system, and none of the other USB devices have no problem at all... (this happens even without/before plug in the device to scan..)

    I also made an update of the Bios and checked if all USB ports are active and enabled in the Bios, no problem...

    System = dell optiplex 5040, windows 7 Professional 64 bit

    any ideas?

    Hello
    Click the Start button and type folder in the search bar, then open the Temp folder indicated.

    Open the last HP installation folder that begins with 7z (e.g. 7zs1234)
    Open the installation folder.
    Find the file usbready.exe and rename it to usbready.old.exe
    Navigate to the main extraction folder (folders that begins with 7z) and run the Setup.exe file.

    Now follow the installation and check for the difference.

    Kind regards
    Shlomi

  • Of failure, white screen MacBook Pro HARD drive try to boot from the external HARD drive

    Hello

    I have a 2008 Macbook Pro which is having some problems, I was able to fix them, but eventually the hard drive failed. I know that because at startup until it would have a white screen Uni (no logo) and you can hear a clicking on in the lower left corner. I thought initially it was a memory problem, but after opening and verification of memory, it's clearly the hard drive.

    I solved this problem temporarily (until I can replace the HARD disk) by installing El captain on an external HARD disc and start from that. Here's the twist, I couldn't he can begin to El captain, I tried CMD + R, CMD + OPT + R, CMD + OPT + R + P and now shift. Everything that's happened would be that clicks would cease to release the keys.

    I left the macbook on while I'm at work, when I got home it was on the screen to connect the external HARD drive.

    I accidentally closed the macbook yesterday and again once when I tried to log on, I could not and I left it on a white screen while I was sleeping. There is a possibility that he may have launched from the HARD drive when I get home, but if not, is there something that escapes me to force do this?

    See you soon

    Usually start up to a blank screen without the Apple Logo, may report one of the following:

    • Hardware failure
    • Boot drive is not recognized as valid and updated updated
    • OS X essential software is missing, hurt moved or renamed or corrupt
    • A firmware update is necessary

    No matter who, in order to boot from an external drive "bootable", you would normally hold down the Option key until you get a screen that offers a number of devices to try to boot from.

    Alternatively, you can try holding down the C key to try to boot from the external drive.

    If none of these startup options work, then the bootable disc or the USB port on your MacBook Pro can be the question.

    Since you have a Mac pre-2013, if you hold down the D key while booting, the built-in Apple Hardware Test should start up.  This can help to identify hardware problems.

  • Satellite A210 - 1 4 do not recognize the optical disc drive

    I have a satellite A210 - 1 4 who recognize the strange.
    The drive has power and running disks but does not appear as a drive in MY COMPUTER.

    It is also not recognized in the Bios.
    I updated the Bios and tried to install the firmware but the message that the drive is not found.

    I tried in another computer and it works fine.
    If anyone has had similar problems, and is there a solution?

    Thank you very much

    > I tried in another computer and it works fine.
    You have tested optical drive in another computer?
    In any case, if the STRANGE is not recognized in the BIOS I'm afraid controller ODD m is defective. It comes to the motherboard so there is not some sort of easy solution.
    I don't think you can do much except to swap the motherboard.

  • Sdatellite M100 does not recognize the CD/DVD drive in Windows XP

    It is listed in the Device Manager, but with a yellow explanation mark.
    No mention of this in my computer.
    No icon.

    I am able to open the drawer and I put several types of cd/DVD in them without any result.
    The light flashes in orange on the door. The drive is listed as "Mat * advd-ram uj - 841 s-(sm)" in the bios under boot devices.

    I'm trying to figure out how to remove the drive and reconnect but it seems that I have to disassemble the thing to do and hesitate without a diagram.

    It is only a user guide in the downloads on this site so any help is appreciated: 0)

    Oh, I also downloaded the driver from this site for the drie. Before that, I uninstalled the drive in Device Manager, but there was no change when I installed the downloaded driver.

    Simply using a Ubuntu Linux live cd and it is running.
    Unfortunately its going to be hard to know for sure what the problem in this way because I don't want to install ubuntu on this machine it is someone elses machine and they are far from would you like to try linux.

    I'm in a live session now.
    Ah ok when I go in the media folder there is no mention of the cd/dvd drive.

    It is really a problem unless I can unplug physically the Mo and reconnect: 0 (Oh wait here it... is under 'cdrom' folder ' but only files with a relevance to the side by side with windows installation are mentioned... exe files, wubi etc..)

    Ah ok that's beyond my experience.
    Can someone give this amateur a tip?

    First remove the player of ODD (CD/DVD) from the list in Device Manager.
    Then access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:

    HKEY_LOCAL_MACHINE \ FAT32\ CurrentControlSet \ Control\Class {4D36E965-E325-11CE-BFC1-08002BE10318}

    Finally, you must restart the device.

    Once again, windows will recognize the STRANGE

  • Satellite Pro M10 - the (original) display driver upgrade?

    Hello

    is it possible to upgrade my display driver on my laptop M10 with the original driver? I'm using the latest drivers nVidia Toshiba (36,48) but NVIDEA has already more recent upgrades, but it will not recognize the my graphic card and refer to the use of Toshiba drivers.

    Any way to install the original NVIDIA driver instead of the Toshiba driver?

    Thanks for the help
    Andreas

    Hello Andreas

    I put really don't know if it is possible to install the original NVIDIA driver but it is recommended to use the driver provided by Toshiba. The reason is very simple. This kind of restriction is done to save the cell damage equipment. As you know the cooling of the hardware components is not so easy and.

    Because of this, he cannot allow that this graphics card works with maximum power. In this case, it produces a lot of heat and it may happen that the card may be damaged or the laptop turns off due to overheating. If there is a message that the card is not there it's just a mechanism of protection, and there is no way that the hardware may be damaged. Believe me the repair costs are very high.

    Good luck!

  • Satellite A200-1vp with Vista - code 39 of the CD/DVD drive failure

    Hello

    I was burning and watch DVDs on my Satellite A200 - 1 VP, with vista, since February, the last time I burned anything was a couple of weeks.

    Suddenly, there is a problem, no response when I insert a disc and my divx player says me no recorder found.

    When I am looking in the Device Manager I get the message 'windows cannot load the driver for this hardware' (code 39) "driver is damaged or missing.

    I tried to uninstall it and using the limit filter upper/lower of Toshiba, repair tool but on restart it still cannot install.

    Should I try the Toshiba Recovery Disc and lose a lot of that programs/files, as a last resort?
    Would this work?
    Anyone have any ideas?

    Here's an interesting article from Microsoft Knowledge:
    http://support.Microsoft.com/kb/270008/en-us

    You must first access the Device Manager and should remove the reader of CD/DVD from the list of devices.
    Then should access the registry and delete the Upperfilters and Lowerfilters completely from the following registry key values:
    HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

    Reboot the laptop and check if the CD/DVD drive would work again!

  • Portege R700 - how to replace the optical disk drive?

    Hello
    I would like to replace the optical disc drive (ODD) with a Solid State Drive (SSD) on my Portege R700.
    So my first question is: what is the way to remove the STRANGE?

    And my second question is: can I replace it with a Caddy drive HARD ICY BOX IB-AC642 or Akasa AK-OS2SSA-BK?
    Interface SATA caddy fits with the WEIRD interface?

    Thank you for your answer

    Hello

    It s really complicated because the STRANGE is placed inside and remove it you must remove all the screws that fix the bottom cover.

    I wouldn't, because you will lose the warranty.
    More I doubt you could get the second HDD to work in ODD Bay.
    I think that this is not supported
    Just the laptop s as Portege M400, M700, M750, Tecra M9, S3 or S4 with a select Bay slim support would treat the 2nd HDD instead of ODD.

Maybe you are looking for

  • When I click on Newtab, I get Bing instead of Google

    When I click the Newtab button, I get Bing instead of Google. This has been plaguing me for months.

  • ITunes can't find my device

    I've just updated to iTunes 12.4 on my mac under OS X 10.11.4 and cannot find my device from iTunes. The device, I am trying to connect is an iPhone running iOS 9.3.2 6. I'm doing something wrong or should I go back to an earlier version of iTunes?

  • All the pop popup in new tabs instead of new windows.

    All the pop popup in new tabs instead of new windows. I don't know why, but this happens not just a site, but all of them.

  • DVD drive does not write - Satellite M40X-175

    Im having a problem with my dvd. I tried to burn my movies, music and my files on a dvdr or cdr, I tried DVD - RW and CD - RW but I do it every time gives error "d:\ is not accessible incorrect function". but when I try to watch a dvd movie or use my

  • HP envy x 2 wifi after sleep

    Hello I have a HP Envy X 2 g001-el Atom convertible netbook with detachable keyboard. upgrade to win8.1 Home wifi network, it must 'autoconnect' to this network. The fact is that when I turn the laptop, plug in and working properly. Whenever I take t