The SuperMulti Drive KS06 GT30N Firmware update version! Having a problem...

Having a problem with my laptop DVD - player...

When I update my firmware of DVD player, it says "device valid ATAPI can not be found! "F/W model is DVDRAM GT30N "
Someone please help...
Thank you.

Such problems are specific Sony, see their help/support pages or the Sony Forums.

MS Does not produce firmware

Tags: Windows

Similar Questions

  • Not compatible with the selected drive - Satellite A300D firmware update

    Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

    And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

    Please help me.

    Hello

    Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
    In my opinion firmware update is not normally necessary.

    Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

  • Why the iphone 4 is unable to update version? Latest version 7.1.2

    Why the iphone 4 is unable to update version? Latest version 7.1.2

    because the material is too slow

  • We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please, help us to solve

    We bought a license for adobe Photoshop cs5 and the machine, we have installed this app is having hardware problem then we moved this hard drive on another machine and now there are registration conflicts, and we couldn't save it please help us solve this problem.

    Most likely, you will need to contact Adobe to reset your license.

    Contact the customer service

  • Objective of the firmware update (Version 2) for the A6000

    The update of the firmware (version 2) lens for the NEX - 6 work on the A6000, activation pdaf on lenses like the SEL18200? The answer I get from Sony is that this firmware is not yet available, but I've heard reports of several people on the forums that the NEX-6 version works on the A6000. Has anyone tried this before?

    Hi THE-949198! The usefulness of the firmware is only for use with the Sony NEX-6 camera. It is not recommended to install this utility with any other model, as this may cause damage. The camera firmware update and the changes experienced by the latter are permanent. It is not possible to return to a previous firmware version after this firmware update.

  • The Installation of Adobe Illustrator CS6 update (version 16.0.4). failed Error code: U44M1P7

    When you try to update Adobe Illustrator CS6 updated (version 16.0.4) I get this message: Installation failed. Error code: U44M1P7

    I tried to go on the website and download manually but I get the same message.

    After bypassing the adobe application manager, it's the next step: http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html

  • The Installation of Adobe Illustrator CS6 update (version 16.2.0). failed Error code: U44M1P7

    Through creative cloud adobe I managed an update on Adobe software.

    Working with OS X 10.8.2

    Message:

    Adobe Illustrator CS6 update (version 16.2.0)

    Failed installation. Error code: U44M1P7

    Haven't tried several times, no change...

    How to solve this problem?

    Weird... The message says: update version 16.2.0, my version is 16.0.0

    I tried the other suggested

    'Solution '.

    Download and install the updates manually.

    Go to http://www.adobe.com/downloads/updates and download the update that you are trying to install.

    Downloaded an I tried to install AdobeIllustrator16.0.3 (so: NOT 16.2.0), however, a message this patch is not intended for this update (or something similar).

    So........ I don't know who does?

    Run the Creative Suite cleanup tool, let the AAM reinstall applications, and then try again.

    Mylenium

  • Satellite M40x-189: on the HARD drive and graphics card update Question

    Hi people just a few quick questions.

    1. a second hard drive can I be mounted on the cell above?... it came with a 60 GB HARD drive
    graphics mobile geforce or ati 2. can / will be mounted instead of the integrated graphics card?

    the answers would be greatly appreciated.

    Hello

    It is not possible to upgrade or replace the graphics card. The graphics card is a small chip that attaches to the motherboard. It s not the same technology as on desktop computers.
    Upgrading the HARD drive is something different. It of possible to replace the HARD drive to another. But before you replace the HARD drive, you must check if the HARD disk is compatible and if the BIOS will recognize.
    Sometimes the BIOS cannot recognize the hardest.

    Good bye

  • Win7, installed on the RAID1 does not work Windows Update and messneger (SID problem)?

    Hi, first of all the machine description

    OS: Win7 Pro 64 bit Original and new
    MB: ASUS P7H57D-V EVO
    Processor: Intel Core i7 860
    RAM: 4 x 2 GB Corsair XMS3 CMX4GX3M2A1600C9
    Graphics: Ati Radeon HD5670
    HARD drive: 2 x WD GP 1 TB - 1 x Seagate 1 TB

    Problem: a bit long to explain...
    I first tried to install the OS on a RAID1, so initially I set raid in the bios with the 2 WD1Tb, then I created the table and I started the installation.
    WIN DVD it recognises the table, it starts installing, it made the first reboot, when is close to finishing it gives an error that cannot complete the installation. I spent 10 days trying to solve the problem without result.
    So I decided to work around the problem, I installed the operating system on a single hard drive, then I cloned the HDD for the RAID1.
    Everything seems to go well but... Update Windows and MSN Messenger will not connect, as having a problem of equality SID.
    If I clone the installation of work, everything works on a different disk included WIN UPDATE and Messenger.
    Cloned on the table, right.
    The table is correctly recognized by WIN7, I downloaded the latest drivers from the Asus MB site, but the problem remains

    What can I try?

    Thank you to everyone

    If 'update of Windows and MSN Messenger' [AKA Windows Live Messenger] are not connected, the chances are it is a network problem. And then...

    1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

    2. If Win7 64 bits is pre-installed on the computer when you bought it, a free trial Norton or McAfee came preinstalled, too? (No matter if you have never used or activated).

    =======================================

    How will I know if my computer is up to date?
    http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

    How TO activate the automatic update enabled or disabled
    http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

    You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
    http://support.Microsoft.com/kb/836941

    How to reset the Windows Update components?
    -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
    http://support.Microsoft.com/kb/971058

    ~~~~~~~~~~~~~~~~~~~~~~
    [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates (Vista & Win7).

  • Lo-res images appear in the exported PDF from Indesign files - anyone else having this problem?

    I used Indesign for years without this problem...

    But I noticed recently that many of these images (PSD, TIFF, or JPEG) that I placed in Indesign files are exported as pixelated, versions low resolution when I export for printing (PDF/X-1).

    I tried different settings, but in each case, the image (which appears thin and sharp as seen in Indesign) came out like a pixelated mess blurred.

    This seems to have started happening in the past months.

    Vector graphics are fine.

    Anyone else having this problem?

    Or someone at - it a solution?

    Also use some PDF parameters where resolution is not sous-echantillonnees at all.

    Turn off downsampling.

    And I would like to test, when you export to PDF/X-4 would make to the resolution of the images.

    Just to know, if something is fundamentally wrong with your PDF export feature perhaps.

    Uwe

  • Cannot connect to the ix2 Lenovo after the 4.1.202.33573 firmware update

    Hello, I've updated firmware for 4.1.202.33573 (the previous was 4.1.106.31982) and after that, I can not connect my Lenovo ix2 using different web browsers. After you type the user name and password and clicking "login" nothing happens for 1 + hour but appears only "processing...". "message on background greyed. After more than an hour of "processing...". "it appears the error message:" impossible (get/read) asked for information "(excuse me risk of errors in the translation of Polish messages in English). After updating firmware also the power and reset buttons stopped working. By pressing or holding the button market / stop has no effect as pressing reset with a PIN. To restart the unit I had to disconnect the power supply and connect again, but also had no effect on connection problems and buttons. Evolution of the browser has no effect. Despite these problems of storage is available - I can connect a network drive, copy files from and to the storage. Is it possible to go back to the previous version of firmware that worked properly for a long time wihout via web interface? -Cordially - Maciek

    Read this post to see if it helps:https://forums.lenovo.com/t5/Lenovo-Network-Storage/Lenovo-iOmega-ix2-Login-and-Printer-problems-aft...

  • The WVC54GC killed V1.1 Firmware update!

    Bought 3 cameras, all worked out of the box.

    Stupid me checked for updates after installation.

    Update firmware filled 1.26 on one camera only, thank God

    Firmware filled successfully via an ethernet cable.

    Camera immediately begins to picture then refused to connect

    Via wired or wireless

    Camera will not be reset or lies in the installation of the software

    Whereas the retailer 45mins of me is not impressed

    I thought firmware for improvements not to kill the product.

    Any advice would be appreciated

    The 2 other cameras I have not upgraded work very well.

    Update

    I got it back online. It seems that it would not take the DHCP for ip address assignment.

    I ended up changing the ip address of my router on 192.168.1.1 from 192.168.0.1 (Dlink)

    I then connected to 192.168.1.115 and set it to dhcp but not go so I left to the fixed ip but changed to

    192.168.0.115 and then changed my router to 192.168.0.1

    In my router, I have changed my allocation of ip addresses in the dhcp for above 192.168.0.120 protocol so I could then assign

    address all 3 of my cameras fixed ip.

    There are numerous other features of tech on my network that would be more hassle to change the ip if I had left my router at 192.168.1.1

    In my opinion, the upgrade firmware screwed something with the assignment of the address ip (dhcp) or acceptance rather.

    It is down again and sometimes freeze.

    I find quite a delay in the cameras through the bundled with cameras multi camera viewer.

    I do not see the delay if the display through IE8. Maybe I'll try to increase the fps and see if it helps.

    If I can't get the firmware original re-Flash then I'm probably going to return it and get another

    I advise anyone to buy this model of camera to leave the firmware because it is out of the box, if it works.

  • The Dell Inspiron 13 5368 Firmware updates

    I am trying to update my firmware on my laptop, but every time I open the .exe file and extract it, it opens to it. If I try to do something that I am invited to a password.

    Update the firmware in the Device Manager...

  • The Installation of Adobe Illustrator CS6 update (version 16.0.3). failed Error code: U44M1P7

    ARRRRRGGGGHHH! I can't update Illustrator CS6 to 16.0.3, I have this error code: U44M1P7 and now I can run the current version (16.0.2)!

    10.8.2 OSX

    Please download and install the updates manually.

    Go to http://www.adobe.com/downloads/updates and download the update that you are trying to install.

    Reference: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-upda tes-HYPERLINK

  • Have iMac, PS CS4 and printer Epson R2880. Has been offered a free upgrade to Yosemite and now the PS do not print. Printer works with the finder, but no PS all updated without having to learn a new system?

    Macintosh in Photoshop (read-only)

    Also, update you your CS4 after the new installation of the download?  It should be to Photoshop CS4 version 11.0.2.

    All Adobe Downloads (other than updates, of course) install the original version and must be updated.

    He knew printing bugs in earlier versions.

Maybe you are looking for

  • Once an unapproved site is added as an exception, how can I delete the exception?

    using FireFox 27.0I want to remove an exception for a website utrusted. There is no tools / Option / security in this version.Preferences / security is not the list either.

  • Remove phone number of iMessage

    Hi all I enabled iMessage on my Apple ID, that I use on my iPhone and my Macbook Pro. I added my mobile number to my Apple ID. I configured iMessage on my Macbook so I can only be reached on iMessage via my Apple ID address. I want to implement iMess

  • What is the latest software for nano?

    the system tells me theres a new software, - is it true?

  • eprinting

    I have a Samsung Gaxaly Note 10.1 tablet 2014 and an HP Officejet Pro L7590 printer.  When I try to print from my Tablet I get the following message: "to use mobile printing, connect your device to a printer via Wi - Fi, WiFi Direct or Usb network. 

  • Forge Digital Signatures

    I use Adobe Acrobat X Pro with Windows 7. I know that I can create a digital ID using a person's name and sign using digital signature. Forging of digital signatures can be avoided and there at - it a measure of security in place? Let's say I need a