The svs4050 camera is supported by National Instruments hardware?

Similar Questions

• Status code: internal software error-223091 occurred in the DSA software. Please contact National Instruments support

  Hello

  I work with card 4461.

  When writing the data on the card I get this error

  The channel which has been set up had

  Update rate: 9210

  None of the samples: 87643

  Sample mode: finite samples

  Sync: Synchronization with AI0 even of the same device

  The values lie between 6 V and 1 .2V

  error occurred in the function .

  {Message of error =-223091 = "internal software error occurred in the software DSA. Please contact National Instruments Support.\n\nTask name: Magnet\n\nStatus Code:-223091 "}"

  The Stack Trace:

  «to nNIMSSAIL100.StatusObserverT<><>otNetApi > >.» CheckWithName (StatusObserverT<><>otNetApi > *, tCaseInsensitiveBasicString\\,_STL::allocator\\,nNIDMXS100::tLocaleConsideringWideStringComparitor\\,nNIDMXS100::tLocaleConsideringWideStringCaseForcer>* pName) \r\n

  to nNIMSSAIL100.StatusObserverT<><>otNetApi > >. Check (StatusObserverT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.StatusObserverWrapperT<><>otNetApi > >. Check (StatusObserverWrapperT<><>otNetApi > *) \r\n

  to nNIMSSAIL100.WriteotNetApi >, class nNIMSSAIL100::AnalogWrite, double > (tTask *, Double *, UInt32, UInt32, UInt32, Double, Boolean, Boolean, tScaledDataFormat, StatusObserverT<><>otNetApi > *) \r\n

  to nNINETAI2005100.Write1DotNetApi >, class nNIMSSAIL100::AnalogWrite, double, double, cli::array^ > (task task, Double [] buffer, UInt32 numChannels, UInt32, UInt32 numSamples lines, Double timeout, Boolean autoStart, Boolean interlace) \r\n

  at NationalInstruments.DAQmx.Internal.AnalogSingleChannelWriterImpl.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  at NationalInstruments.DAQmx.AnalogSingleChannelWriter.WriteMultiSample (Boolean autoStart, Double [] data) \r\n

  Project.Analog1ChannelWriterTask.Write (Double [] data, Boolean AutoStart) in C:\\Project\\AnalogWriterTask.cs:line 446\r\n

  to Project.HardwareIO.WriteAO (Double [] Data, Boolean AutoStart) in C:\\Project\\HardwareIO.cs:line 120\r\n

  at Project.DataAcquisition.RunAcq (C:\\Project\\DataAcquisition.cs:line 182\r\n)

  at Project.DataAcquisition.Run (C:\\Project\\DataAcquisition.cs:line 68\r\n)

  at Project.Program.ThreadFunction (C:\\Project\\Program.cs:line 47\r\n)

  at System.Threading.ThreadHelper.ThreadStart_Context (Object state) \r\n

  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state) \r\n

  to System.Threading.ThreadHelper.ThreadStart ().

  TargetSite:

  {Void nNIMSSAIL100.StatusObserverT<><>otNetApi > >.} {CheckWithName (nNIMSSAIL100.StatusObserverT<><>otNetApi > *, nNIDMXS100.tCaseInsensitiveBasicString\,_STL::allocator\,nNIDMXS100::tLocaleConsideringWideStringComparitor\, nNIDMXS100::tLocaleConsideringWideStringCaseForcer > *)}

  I am using VS2005 c#

  Please tell me what wroing

  Kind regards

  Alok dandois

  Hey Alok,.

  This error code means that the revision of the map is more recent and not yet supported by the driver.  That the release of new versions of the same map with new features, the ID usually changes requiring a new version of DAQmx.  Try upgrading to the latest version of DAQmx and try again.

  While you're there.  See if you can find the product ID located in Device Manager (if you are using Windows).  Once in the Device Manager, right click on the device and click Properties.  Go to the Details tab, and then copy the entire string that is displayed under "Device Instance Id".  It should look something like PCI\VEN_xxxx & DEV_xxxx...  Paste in a reply in this thread can I be sure of your problem.

  Germano-

• Various support material National Instruments that are not signed or?

  Hi, I want to know if I want to remotely control a Power suply programmable via rs232 with labview, do I have a power suply of OR or can I use any kind?

  No, the equipment you use should not be made by NOR.  LabVIEW tolerate anything out there, but you can be on your own for drivers.  Sometimes, someone has programmed your device drivers already.  They are usually displayed in the page drivers.  You can use these programs conduct as the beginning of your code, putting them where you want.

  Example; I have a DMM 195 Keithley I want to program for.  I search "Drivers Keithley DMM 195" on ni.com.  I get

  http://sine.NI.com/apps/UTF8/niid_web_display.model_page?p_model_id=146

  I connect and download the drivers.  It takes really worth of com controls or programming GPIB protocols when you have a base like that.  Older or more social facilities do not have the pilots, in which case, good luck!

  Most labview code, at least in the areas of research, is done on the material non - OR.  NOR has given us a highly flexible base to use with a large number of pieces of equipment, that's why we stick with labview and NOR, even if we are unable to use their material.

• Cams has supported to post real-time monitors?

  Hello

  I was watching the camileo cams.
  Supports any one of them hang a direct on an external monitor
  NOT for playback of recorded images, but as a _live_ extract. (even if not recording)

  If the TV cannot, which cam can? =)

  Thank you!

  Hello

  I have a Camileo H30 and this camcorder supports a mini HDMI output port.
  I have that could directly connect to my external monitor and got a video output directly on the monitor.

  I think that any other camcorder with a video on the port (HDMI, etc) would support such feature

• Error 1 has occurred to C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data

  Ok... Seriously I'm banging my head against the wall here.

  I'm using LabVIEW 2011 SP1.  VideoMASTER 3.1!  I have compiled mass screw on the 2011 folder.  It does nothing good.  2 machines to put up with the same versions of LV and VMS.

  I use the VBF in Image file VI niVMS to convert .vbf files to jpg.  I browse to folder of waveforms in the public domain for VideoMASTER and select the native C:\Users\Public\Documents\National Instruments\VideoMASTER\Waveforms\480p RGB OmniGen.vbf file.  I then monostable it in the same folder as the jpg file.  I get the following error:

  "Error 1 occurred in C:\Program Files (x 86) \National Instruments\VideoMASTER\bin\VideoMASTER.dll\Check Size.vi of data.

  Possible reasons:

  LabVIEW: An input parameter is not valid. For example if the input is a path, the path can contain a character not allowed by the operating system such as? or @.
  =========================
  NOR-488: command requires GPIB controller charge controller. »

  On computer A, I do NOT get this error (in fact, everything works fine for all files).

  On computer B, I get the error.

  Do the same for the vbf HDMI file in the folder of waveforms and it works very well.

  Do the same for the 480 p file, but a bmp file and no error, however the bmp file is corrupted with no data.

  I need to know what is happening in the bowels of this dll.  Maybe I'm missing a codec on Machine B?  It seems that I'm missing a dependency for this file type.  If so how would I know which?  VMS I reinstalled several times.  I copied the dll over the Machine A.  I checked is NOT a licensing problem.

  Any thoughts?

  Thank you

  Jigg, with some quick research, it seems that the accident that you see can be related to do not call the niVMS function initialize before VBF to picture file feature.  Please try to run each of the screws after the launch of LabVIEW 2011 and see if you get the same results, and also adding the Initialize works in your code solves the problem.  If so, it seems that it will be your workaround solution, but we will also file a bug report; crash is not an expected way to treat this condition.

  Edit: Also, if you have other versions of LabVIEW, 2012, etc., which you can compare run this code, we would be interested in the results.

  Thank you

• Best method for updating CompactRIO data to Server "National Instruments.Variable Engine.1"

  Hi all, I have an OPC Client of third-party I want to use for testing with the CompactRIO. Can I specify 'National Instruments.Variable Engine.1' in the OPC server, create a new item of the mutual FUND, go to a variable and then see its value. I use a CompactRIO and I want to send the updated data that I am acquisitionning of for third-party Client OPC, then, what is the best method? Currently, what works, is that I created a shared variable published to network on the LabVIEW host that I dragged in the CompactRIO project. I've created a small loop increment value every 500ms. I then created on the host computer, a little VI, who issued this national value to "" Instruments.Variable Engine.1". Now, is there a better way to do his? Is it something that can automatically fill in manually the Variable of the CompactRIO motor without publishing the shared inside a LabVIEW application variables? Thank you for your time, best regards!

  Thanks a lot for your replies, Drew,.

  I downloaded the OPC UA API and it will next week.

  Thanks again!

• New camera.  LR. Don't let me import the photos in the new camera.   Get the following message: some import operations have not been executed.  The files are not recognized by the raw format support in Lightroom...  Application of point 4.4 of Lightroom. 

  L.R., I cannot import the photo of the new camera.   Get the following message: "some files are not recognized by the raw format support in Lightroom."  Click below to view a version update of Lightroom.   Done this and updated Lightroom 4.4.   Still cannot import - get the same message.

  Devices supported by Adobe Camera Raw

  The D610 requires LR version 5.3 or newer.

  If you don't want to upgrade, you can download the current DNG Converter and convert the NEF files to DNG before importing the DNG files.

• I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter?

  I installed camera raw which supports photoshop cs5 several times, but why I'm not able to find the raw camera filter menu Filter

  Hi sharathm,

  Greetings!

  Camera filter gross was not with photoshop CS5.

  You have installed the camera raw plugin and not filter raw from the camera.

  You can open files in camera raw using of bridge or just right click on the image and choose open in camera raw.

  Check out this video here: https://www.youtube.com/watch?v=UKJuUC9_XUg

  Concerning

  Jitendra

• NB200-122 Win 7 compatibility / software support of the Chicony camera

  I upgraded the operating system of my NB200 122 of WXP to Win7 Pro. I am very happy with the new OS. Almost everything I do with XP, I can do better with Win7. Wait for the Chicony Camera Assistant Software.

  After a thorough search on the web, consider that it is not possible to use the internal camera.

  Am wrong me or are there workarounds to use?

  Hello

  Chicony software is not the model of laptop.
  Choose the Chicony for Win7 software that has been released for other series of laptop.
  It should work fine.

  Welcome them

• I am expierencing problems with my isight Camera on my MacBook Pro. Suddenly the video camera does not start (no green light on) FT or Photo Booth. The screen is black, if I restart computer it works but after closing the lid, it stops. V10.11.3

  I have problems with my view i camera on my Mac Book Pro. Suddenly the video camera does not work (no green light on) FT or Photo Booth. The screen is black, if I restart it, it works but after closing the lid it stops and I have to restart the computer.  I use V10.11.3. An idea about what is happening

  Hello mpm068,

  Thank you for using communities of Apple Support.

  Since your iSight webcam works up to the time that your Mac goes to sleep, I would like you to start please help desk trying to replicate this problem then to reboot in safe mode:

  1. Choose the Apple menu > shut down.

  2. After your Mac stops, wait 10 seconds, then press the power button.

  3. As soon as you hear the startup tone, hold down the SHIFT key.

     You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

  4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

  To exit safe mode, restart your Mac, but no press during the startup.

  OS X El Capitan: start in safe mode

  Take care.

• Re: Portege R830 - cannot find my model on the list of Product Support

  Hello world

  I recently bought a Portege R830 and was trying to find support for my model page.

  However, on the list of Product Support, where you choose the model, I can't find which is mine.

  My model is displayed as * R830-1056UB * in the box your laptop came and he just say * Portégé R830 * on the underside of the laptop.

  There are several entries for R830 on product support list, but * R830-1056UB * is not one of them.

  * Any ideas how I can decide which one is mine? * (I'm worried about download bad software/drivers for my laptop)

  I'm not in a country with a support phone number and it seems Toshiba support do not have a contact e-mail, so I was not able to contact Toshiba directly for help.

  Thanks in advance for your time and help!

  RG

  Hello

  I put t know that Toshiba support page that you have controlled, but if this laptop is designed for the Asian market, you should find it on the support Toshiba Asia page.

  In which country did you buy?

• LabVIEW 8.6 compatible with current products of National Instrument

  Based on the above title, I'm currently have software LabView version 8.6. If I choose not to upgrade to the current version, the software will always be compatible with all National Instruments products? I'm hoping to create a centralized thereby logging of data center.

  Thank you

  Hi chywn, that specific products OR do you use? Here are some links on the website to OR who can answer your question:

  Which are compatible with the Versions of LabVIEW with that OR drivers?

  NOR-DAQ and LabVIEW (for Windows) version compatibility

  Module LabVIEW and Toolkit compatibility information

• built into the laptop, camera does not work

  Original title: Enhed

  Hello l have a portable acer. The problem is that my wecam inbuildt no longer works and l can't seem to find the problem. Please l need help

  Thank you thank you

  Hello

  Check with the Acer Support, their documentation and online drivers.

  Acer - USA - Service and support
  http://us.Acer.com/AC/en/us/content/support

  Acer - drivers and downloads
  http://us.Acer.com/AC/en/us/content/drivers

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  ============================

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  Vista references apply to Windows 7.

  You probably need to recharge the device drivers and any software control of the 'IF' camera, there is
  everything for Windows 7.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (update drivers manually using the methods above is preferred
  to make sure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Recently impossible to import Photos from the digital camera or iPhone device

  In the past, whenever I have one of my digital cameras or an iPhone connected to my PC (Dell Inspiron 530 running on Windows Vista), the import box would jump to the top, I'd choose to import photos and everything worked without problem.  Not sure if this has anything to do with it, but recently I uninstalled Norton Internet Security 2007 and installed Norton 360 and since then I'm unable to download pictures from my digital camera (Canon Powershot SD950 IS) or my iPhone.  The box "import photos" don't jump (it always did before), and when I go to the Picasa or Windows Photo Gallery and try to "import from camera", it tells me there is no connected device (this happens when the iPhone or the Canon camera is plugged).  And instead of the pealing sound, my PC would usually do when a device is correctly spiked, he made three low knock-type noises, as if to say the device was not properly read.  Interestingly, the iPhone still synchronizes / charges, etc., but I can't get on the photos.  I spent some time chatting with Norton Customer Support, because this issue has started only after that I installed Norton 360, but we have uninstalled Norton 360 (re - installed since) and the problem continued.  I tried several ports, and because this problem has affected at the same time my iphone and a digital camera, that work with any other son and USB ports, I'm pretty sure that this is not something simple like a bad port or wire.  I don't know if it's a matter of updating Windows Vista or what.  So now I'm scratching my head...

  Hi BklnMick,

  Thanks for posting your question on the Forums of Windows Vista.

  I need more information to help you better.

  1. do you think any drive new withdrawal created on the desktop once you connect your digital camera or Iphone?

  2 have you tried to reinstall/update drivers for the digital camera or Iphone?

  3. you see a new message of material found during the connection digital camera or Iphone?

  4. are there any other devices (such as mouse, keyboard, printer etc.) connected to the machine?

  If you are sure that the problem started after installing an application, you can try to perform a system restore on the computer to a previous date when you when it is able to import photos from your digital camera or your Iphone. You can follow the article give:

  http://support.Microsoft.com/default.aspx/KB/936212

  You can also try to power on the machine cycle to drain static electricity that may have built up on the USB ports.

  1. turn of the computer.

  2. disconnect all devices from the CPU.

  3. hold the power button for every 30secs.

  4. connect all devices to the machine.

  5 restart the computer and check if the USB begin to operate.

  Hope the above information helps. Please post back and we do know.

  Thank you & best regards

  Ashish Gupta
  Microsoft Answers Support Engineer

• Can not stop the Windows Help and Support screen to appear several times

  I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.

  Advice to address this very frustrating situation would be appreciated.

  Hi Maree33,

  Let's run Windows Update and make sure that you have all the latest patches and service packs loaded.  In Internet Explorer click Tools then Windows Update and follow the instructions.

  You can also give a quick call Dell and see if this is a common problem with their OEM version.

  Please let us know the results.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.