The system configuration does not

I am running windows 7 and decided to try and resolve messages running and (does not) slow programs. I started to perform a clean boot, but when I had made the changes to the configuration window and clicked on OK the said title bar system (not responding) after waiting a considerable amount of time, I have not quit. When I return to the system configuration window, nothing has changed, but now my PC guard just hung in the system configuration window. The computer is now worse than when I started. I had not done something before.

The first thing I recommend is to restore and filled to half of the changes that have been made with the System Restore utility. First to save open documents and close all programs and then click Start (or press the Windows key) and type s·ymakeUPS·e·Mr r·emakeUPS·o·r·e then select System Restore programs from the list above. When the system restore starts, click Next and choose the most recent restore point that precedes your attempt to create a boot environment. Follow the rest of the procedure described in this article.

Restore system files and settings

Once you have recovered your computer to its state before the attempt to establish a clean boot environment, start with an analysis of malware using a free scan like MalwareBytesanti-malware utility.

It comes as part of the standard offers free and paid-for versions. For standalone scans and malware removal (but not real time analysis), the free version is usually more than enough.

Tags: Windows

Similar Questions

  • Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

    Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

    Hi rebick,.

    Try the troubleshooting steps presented by spirit X in this thread.

    Dena
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Unexpected error in the property page. The VSS service uses the system restore does not work. Error (0 x 810000202). __

    original title: "there was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information, see the journal of events (0 x 810000202). __

    "There was an unexpected error in the property page. The VSS service uses the system restore does not work. For more information see log of events (0 x 810000202).

    Please try the troubleshooting below to check the status of the shadow copy Volume service

    1. click on start > all programs > Accessories > run

    Type the following text in the run window, and then click ok:

    Services.msc

    You will get the Services window.

    2. Please check service Volume shadow copy service is "started" and "automatic".

    If these services are not set to "Started" and "Automatic", please, do a right-click on the service and select "Properties".
    On the window properties, please change the startup type to automatic, and use the Start button to start the service.

    Click on apply, click ok.

    Close the Services window

    Restart the computer and check if the problem occurs again.

    If the problem persists, start your computer in safe mode and try to do a restore of the system again. Temporarily disable your anti-virus protection

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    I hope this helps
    If this post can help solve your problem, please click the 'Mark as answer"If you find it useful, mark it as useful by clicking the 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • How to configure the system restore does not delete the specific file such as the .gbp extension?

    Hi all!

    I use software as my ERP system (it handles very important data) and what software is running on FireBird SQL server a there database firebird with extension '.gdb '.

    Some of my partners use Windows 7, 8 or 8.1 and all we/they have a same problem.

    When Windows recognize a system error and to restore of the system (or reboot) and to apply changes this process until the last restore point Windows guarantee also remove data from my database .gdb and in this scenario, I lose all the data entered into these days here (upone the last restore point).

    Thios is strange because it deletes the data from the production database ('.gdb') a step of the backup database (".bkp").

    My question is:

    is there any way I can prevent the system restore to do not touch specific such as .gdb extensions when the restoration of the system (or reboot) is happening?

    i.e.Something as exceptions in the firewall?

    Thank you in advance!

    Best regards!

    Alen

    The only way to prevent the restoration of the system do not touch data is to put the data into an "intact" location, such as your Documents folder.

  • I have the same problem. When I do a system restore, I get an error message. The service of shadow copy of Volume used by the system restore does not work. Error 0 x 81000202

    My security service center cannot be started too.

    Hello

    Malware scan

    malware stops normally you use the system restore protect themselves remove you

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
    7.  

    and try to do a restore mode safe

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
    7.  

    and if using norton disable product anti-forgery protection

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  • Microsoft - accidentally not uninstalled games not in the Recycle Bin, lost the system restore does not work

    Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

    Hi I have uninstalled a few programs and lost microsoft games in the process, have tried the system restore and cannot find them in the Recycle Bin, restore says system 0x8100001A and 0 x 810000101 code

    Assuming that yoy are using Vista...
    Suggestions:

    1. start > all programs > scroll down to find GAMES > open it. MS games still appear? > If Yes, click on one of them > it does not open and it works?

    2. see if this Microsoft Support can be applied to your situation:
    http://support.Microsoft.com/kb/940263 . for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • Equium - dead after hibernation, the system recovery does not work

    Hello
    I'm trying to fix the laptop of one of my friends, but so far without success. It's a Toshiba Satellite with Vista.

    She had problems with a black screen after startup in Windows Vista. I found a work around for this problem, but it was a little complicated for her... She doesn't know much about computers. ;)
    So I but it would be a good idea to tell him to always use hibernation. However, when I put the portable standby extended, all seemed fine, shutdown, power off.
    I tried and then turn it back on. Light turns green, cd drive makes noises. Nothing more. Screen remains completely black. No sounds. Keyboard input does not work. No access to the Manager startup or anything else. He left light until I pass him by pressing the button for a few seconds.
    I removed the battery and put back in place, without result.
    Connection to an external monitor shows no results.
    When I put the original CD recovery Toshiba, no results.

    So, basically a cell phone dead. Ah yes, I'm in the Brazil in a small village, away from the stores of tech support or computer. Maybe a problem material, but all was working fine until I used the hibernation.

    Any help or ideas would be very appreciated! ;)
    Daniel

    Hello

    My laptop could not wake up after hibernation too but I managed to wake up again.
    This;
    Disconnect the power adapter and remove the battery.
    Now, you will have to wait a while 1 hour should be sufficient, but you can leave the laptop disconnected for a longer time (all night long)

    After that, you must connect the battery and AC adapter and should try to light the device if it will not help you then you are in trouble
    This would mean that a serious hardware problem causing this problem and I doubt you could remedy without any help from the ASP.

  • The system image does not work on win7 Home Premium HP Pavilion Elite HPE 250f

    The system image (and Windows Backup with and without Image system options) just do not start with the same error message indicating insufficient space for "Volume Shadow copy".

    HD has about 100 MB for the operating system and other files more about 11 GB for HP Factory Image.  Trying to backup to an external drive, Iomega USB with 650 GB of capacity.  External hard drive now empty but has been used before.

    HP support has no answer!

    April 24, 2013

    Just thought I'd give you the answer to this old problem.

    Windows 7 (for earlier versions) work as described in the help of the screen except that the VSS mode

    must be turned on.  This allows Windows to actuall save parts of the operating system

    Although these parts are involved in the actual backup.

    Shame on the HP technical support for not knowing this.

    In addition, the original tech support suggestion was to call Microsoft.

    With a new HP PC you have no direct support from Microsoft (free).

    It took me a while to work with Paragon Backup (wonderful product) to realize that VSS

    must be enabled in the operating system for these virtual backup features to work.

    {Information}

  • THE SYSTEM CONFIGURATION SHOWING NOT

    I bought the office base model Inspiron 660 s with DOS operating system dealer. IAM entering service no tag. to check the configuration of the system but the following message is displayed.

    On clicking: view the original Configuration:

    Message: There is no information associated with this system configuration.

    PL guide how to check the authenticity of the product.

    The hard drive and bios disappeared already own by the dealer that you purchased. Dell sells no pc with BACKBONE. I suggest that you go back to the dealer and ask for help.

  • XP will not acquire an IP address. Start tcp/ip and obtain the dependency service error. Public static IP and the system still does not work.

    This system was given to me the difficulty.  It is clean of viruses and spyware, it was at a time given some.  Now unable to connect to any type of network, IPs as 0.0.0.0, will not be renewed.  Get dependency errors when I try and start TCP/IP.  I reset the winsock stack.  Any suggestion at this point would be useful.

    Hi MarkReeves,

    1. What is the accurate and complete error message?

    I suggest you try the steps from the following links in the article and see if it helps:

    The network status icon may display a message 'Acquiring network address' after an address is already acquired in Windows XP Starter Edition

    How to reset the Protocol Internet (TCP/IP)

    How to determine and to recover from Winsock2 corruption in Windows Server 2003, Windows XP and Windows Vista

    I hope this helps.

  • Helpctr.exe does not load in the Start Menu. System Restore does not work.

    Help and Support not be loading not on the Start Menu. I get a msg of error helpctr.exe is not found. I run for the file with no result. Also the system restore does not work even in safe mode. I use XP Home SP3. Any suggestions? Thank you.

    No problemo!

  • System Restore does not start and the creation of a shadow copy times out

    What should I do if the system restore does not start, when creating a shadow copy times out?

    Hello

    Thank you for the question to Microsoft Community. I'll give my best to help you.

    1. don't you make changes to the computer before the show?
    2. What is the accurate and complete error message you get?

    I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f

  • Restore not working - the option to restore on my machine does not work. I've highlighted the dates. Does not work in safe mode

    Original title: restoration works not

    The weight restoration on my machine does not work. I've highlighted the dates but I get... impossible to restore messages. I tried switching off my virus checker (Norton) but with the same result.

    Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.
    For example, if you use Norton/Symantec products, you will see a message like this:
    Restoration incomplete. Your computer cannot be restored...
    It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
    According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
    Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.

    Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.

    It works for some configurations.

  • professional XP System Restore does not

    My system restore doesn't work on my xp professional and I think that there are errors in registry. Can anyone help please?

    What does "does not?

    Why do you think there are errors in the registry?

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: Microsoft Security Essentials (MSE), McAfee, Symantec, Norton, Spybot, AVG, Avira!, Panda, Trend Micro, CA, Defender, ZoneAlarm, Comodo, PC Tools, etc.

    What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  Remember that the system restore is not a time machine.

    Have you ever used the system restore to restore your system in the past?

    Describe exactly what happens when you try to perform a system restore and the error messages you see which indicates that it does not work (some thing besides 'it does not work").

    Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

    For example, if you use Norton/Symantec products, you will see a message like this:

    Restoration incomplete. Your computer cannot be restored...

    It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
    https://support.Norton.com/SP/en/us/home/current/solutions/v51118464_EndUserProfile_en_us?product=home&version=1

    According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.

    Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.

    Note that if you do a Safe Mode system restore, you will not be able to cancel it and there is no option on the System Restore screen for "Undo my last restoration" as you would if you were to restore your system from a normal startup.

    Give these ideas some consideration if they apply to you.

    Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.

    No matter what you use for protection against malware, I do so and then only begin to solve any problems:

    Download, install, update, and make at least a full scan with these free malware detection programs can solve any problems:

    Malwarebytes (MMFA): http://www.malwarebytes.org/products/malwarebytes_free
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    It can be uninstalled later if you wish.

    The scans by operating clean, reboot, test and we can fix any other issues.

    System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.

    That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).

  • For acrobat was interruption of 11 system configuration was not completed.  Now can't delete or re-install again.  Can you help me in this problem?

    During the installation of Acrobat 11, interruption occurred and the system configuration was not completed.

    Now the program does not start.  Removal of the program is not allowed on top of the reason.  Re-Setup is not allowed for the reason that the system has already produced installed.

    I'm right with her.  Can someone give me an idea how to remove or re - install?

    Street

    Hi rues80079274,

    Reboot your system, uninstall Acrobat XI using this link Download Adobe Reader and Acrobat tool - Adobe Labs, stop, repeat & reinstall Acrobat XI using this link Download Adobe Acrobat products. Standard, Pro | DC, XI, X.

    Let me know how it goes.

    Kind regards

    Nicos

Maybe you are looking for

  • How can I import addresses and calendar entries from Outlook 2013

    I want to import my address book from Outlook 2013 in Thunderbird. Need advice on how to do it. Thank you.Dick

  • Tecra M10 of the fan is always on

    Hello I have a Toshiba Tecra M10 for a few days now, and compared to my previous laptop, I notice a very different behavior of the fan. The fan of my old Pro L10 of Satellite used to turn off unless the system is really hot. It is around 55 to 60 ° C

  • Wanted: Portege 7220 recovery CD

    I am desperately looking for the recovery CD. Does anyone have an original copy or burned to sell? Do you know where I can find it? Toshiba does not sell you more... Please help. I can't start my computer...

  • 2.2 update seems to have killed my phone

    by using updater 2.2 provided by Motorola, I followed the instructions up to the moment when he said that I had to reboot phone and plug it in again to continue. Now when I turn on my phone I get the "pulse" Android logo and there is never a more far

  • Why Safari is automatically an "s" after "http"?

    Safari seems to automatically insert an "s" after "http", which in fact a search for a site secured, when all I want is the precarious site "http." For many sites, I have to manually delete the s in the url. It's infuriating - and probably a setting