The system could not find the environment that has been entered - option Windows 7

Similar Questions

• Black screen when the VM from the host that has been moved to Windows 7

  VMware Workstation 7.1.3 build 324285 works fine on my old XP machine.  Work gave me a windows system 7. Installed VMware Workstation, copying the VM to Win 7 files.  VM starts but don't have just a black screen, no display.

  Creating a new virtual machine on Windows 7 host works for a day or two, start it with the black screen.  Don't think I'm the only one having this problem but I could not find and specific solutions.  Any help or ideas would be great.

  What I've done so far:

  Ensure that all VMware services run.

  Digitized newspapers.  Host ACPI: unable to find TARS, the host: SRAT table not found in memory

  Do not know if SRAT is a problem or not.

  Orders...

  rickj

  > All the words of wisdom using VMware Workstation on Windows 7?

  you don't want to hear them...

  upgrade your operating system host Windows XP or 2003.

  From my experience WS works much better on XP or 2003 on Windows 7

• The system could not find the environment option that was entered.

  I have Vista Home Premium. I must have met a significant corruption or a virus. Here's what the system won't let me do.

  System restore
  Launch any program exe
  run cmd as administrator
  launch msconfig
  Basically, everything I download don't throw (including several ladies virus recommended this forum and others)
  If it's a virus, he got by AVG free edition
  Safe mode does not enable all the options I get always "the system could not find the environment option that was entered."
  It of almost as if someone really took time to reflect on how to thwart an attack and then implemented in the opposite direction.

  Is blowing the entire disk and back at my only option?

  Help!; 0

  Zitouni,

  Thanks for your reply, good point on the File Checker, I didn't know that. Unforuneatly I have not see your reply until I decided it was time to re - install the system. One thing to note, I couldn't do a 'run as administrator' anyway possible. This system was really corrupt which leads me to believe that he may have been a NTFS/Fat 32 Co-mingling question. Just a guess, but I really don't see how it could have happened otherwise.

  Another thing to note, if you have a Dell Inspiron 1720 with a 250Gig HD-make sure that you format the partition, you then load the SATA drivers! Also, make sure that the restore partition does not primary. Make sure that you format (assuming that you have backed up your data before!). Otherwise, it hangs on Setup to complete the installation. Who took me ahwhile to understand.

  Everything is cool now (reinstalled Vista), just thank ful there is a site like this to run things by! ;)

  Concerning

  Jeff

• At startup, getting the error - the system could not find the environment that was entered

  I have Windows Vista Home Premium and I have the OS on my hard drive with no CD. I get the following error message when I start my laptop on the desk. The system could not find the environment that was entered. What can I do to fix this?

  The only answer I found in Google:
  http://UK.answers.Yahoo.com/question/index?QID=20100411034348AAALd89

  Your laptop you happens to be a Sony Vaio? What model?

• __why my computor still says the system could not find the environment option that was entered when I trey to change settings or load a new program

  the system could not find the environment option that was entered

  Hi Yasish.P,

  Thank you for using the Microsoft Windows Vista Forums.

  I will need some additional information to help you best.

  O when you get this error message?

  Meanwhile, analysis of auditor of file system (CFS) that might help you resolve the issue.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command prompt, the following line, and then press ENTER:

  sfc/scannow

  When the analysis is complete, test to see if the problem you are experiencing is resolved. If the problem you are experiencing is not resolved, use the procedure that is described in the section "the System Restore tool.

  Follow the instructions in the link below for more information on scan SFC.

  http://support.Microsoft.com/kb/936212/

  You can see the link below for more information.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/aa301b37-e6b9-4f8c-B812-3ba2c58e1442

  Please post back and let us know if it helped to solve your problem.

  Kind regards

  KarthiK TP

• System could not find the environment option that was entered.

  The Trend Micro Client caused a bit of stir in my computer.

  He gave me the UiSeAgnt.exe error and I couldn't open any .exe files. I uninstalled Trend Micro and that pop up more rises. But the "System could not find the environment option/variable is entered" is yet to come when I try to run the .exe. This means that same cmd cannot be opened. I can not connect to the Internet independently wireless or wired. Audio system is not even the sense system speakers or external audio devices.

  I tried the system restore, did not work. I tried SFC/scannow, did not work. Now my current idea is to back up my files and blow the computer on with a clean restore. What should I do? I use a Vaio E series 14 p, btw.

  If it really comes down to it, how much memory should I backup everything?

  Hi Vey,

  Thanks for posting your query in the Microsoft community.

  Your system is connected to a domain network?

  This problem occurs in situations where Shutdown.exe cannot access the UserDomain environment variable. The task of the judgment which is on demand by using the at command runs under the system account. When the task is run under the System account, the UserDomain environment variable are not accessible because it does not exist. But the problem occurs mainly on the areas of server.

  I would suggest trying the following steps and check if these help to resolve the issue.

  1. start your system in safe mode.

  2. press on the Windows key + R.

  3. type sysdm.cpl , and then click OK.

  4. click on the "Advanced" tab

  5. in "Startup and recovery", click "Environment Variables".

  6. under "System Variables", click 'new '.

  7. for "Variable name", type in windir%

  8. for 'Value of the Variable', type in C:\Windows

  9. click OK on the all the dialog boxes that pop up.

  10. restart your system in normal mode.

  If, however, your system is connected to the normal mode, please see the following support article.

  Computer does not and you receive an error "System cannot find the environment Option that was entered" when you schedule a task of closing using the AT command

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Ould does not start on local print spooler service. Error 2 the system could not find the file specified. Please need file spoolsv.exe

  Hello

  I suggest you try to launch the fixit of this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  It will be useful.

• Error in Windows Mail - "error 623 - system could not find the directory entry for this connection".

  Original title: Windows Vista, Windows Mail, error 623, unable to connect to the mail.
  This problem occurred after a storm. Modem was fried.  Replaced the modem with the modem "2wire" ATT.

  Now get "error 623: the system could not find the directory entry for this connection"or the sys works very well. " Att think maybe in Vista?  Help, please. Works of g-mail, but I like Windows mail.

  Hello Bbuddes,

  You can watch the following information/tutorial to help with most of the problems of Windows Mail.
  http://www.Vistax64.com/tutorials/62560-Windows-Mail-problems.html

  There is a section to reset Windows Mail which can help with your problem.

  Sincerely,.

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  Hi all

  When you open the HFM application below the error is thrown.

  EPMHFM-66054: the system could not find the process of the application ADNIPHFM data source

  
  

  Another application is created as Test HFM, is the opening perfectly.
  

  Please help me on this issue, very urgent.

  Thanks in advance

  Concerning

  Satheesh.S

  Thanks to all of you question has been resolved by re set up again for the configuration database and upgrade from previous version.

  Concerning

  Satheesh.S

• Why to start Firefox message appears that "the color palette has been changed to Windows 7 Basic"?

  I am running Windows 7. When Firefox starts the message that arrives the color scheme has been changed to Windows 7 Basic. The message then continues to talk about the incompatible program. When I close Firefox to the colors return to normal. It has just begun to happen.

  Check that you are not running Firefox in compatibility, or with a reduced screen resolution mode.

  You can open the properties of the desktop Firefox shortcut via the context menu and check under the tab "compatibility".
  
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

• the account of google in my settings of mail/contacts/calendar sync or even watch the calendar that has been added successfully

  the account of google in my settings of mail/contacts/calendar sync or even watch the calendar that has been added successfully

  Hello 10thCOMMANDMENT,

  Thank you for using communities Support from Apple!

  After reading your question, I understand that you are unable to get the Gmail calendars to work on your iPod touch. When you view your Gmail account in settings > Mail, Contacts, calendars that you see this screen below?

  

  Add an e-mail account to your iPhone, iPad or iPod touch - Apple Support

  If you enable calendars from this screen, you should have your Gamil calendar available in the calendar application.

  See you soon!

• Is it OK to delete the update number 2 after the new update has been entered IE number 6 of the same program?

  to delete the update number 2 after the new update has been entered IE number 6 of the same program

  original title: he is allowed to delete the previous updates of files

  Hi Carl,

  I suggest you go through this article to Java which can be useful.

  Why should I remove old versions of Java in my system?

  Removal of previous versions of the .net Framework is based on the applications that are running on the computer.

  For applications, if you have an application based on any .NET Framework on the computer, you cannot delete it since you have need to support the application runs correctly.

  .NET framework 3.5 SP1 includes .NET Framework 2.0 SP2 and 3.0 SP2. This means that .NET Framework 2.0 and 3.0 can not be deleted because they are the sine qua non of .NET Framework 3.5 SP1. If you have any application based on .NET Framework 3.5 SP1, please do not remove .NET 2.0 SP2, 3.0 SP2 and 3.5 SP1.

  I would also not to uninstall the security updates that are important for the security of your computer.

• Siri don't look for something to do with movies when asked, returns the message "could not find anything for that"

  Siri shows no results for issues related to the films, if requested by the actor, like, years or even simply saying see the me movies the same message comes back "mmm I'm not find anything for that ' any ideas on what could be wrong?

  Welcome to the Apple community.

  Are you sure that you are connected to the iTunes store and if so than that.

• RH2015, when using CBT to publish a subset of a research project is still the content that has been marked to not publish.

  Hi all

  I'm curious as to whether it is "By Design" or something I do...?   I have a project that is a thorough Administrator's guide.  I used the conditional tags build to block most of the administrator and Support information (server names, data graphics APIs etc.) to create a guide to the user of the application: the GUI and behavior of the app is covered with information from the back-end.

  I can publish this project to its own set of folders (Pathed \\server\share\RH_Projects\UserGuideas opposed to \\server\share\RH_Projects\AdminGuide...) when I publish and put conditional compilation and it seems to work.  The table of contents are correct and the additional information and topics do not arise in the project.  However, if I get a name of the API or a name server it pulls up the subjects that have been tagged to NOT be included in the compilation.  I see the UserGuide records research topics that I didn't when building are always moved to the output folder and wonder if there is a way to exclude these subjects for publication in the book of records?

  It seems that the problem was due to the fact that I imported a .docx file.  A theme contains a list historical revisions, graphic and table and he also had a copy of the Doc TOC.  It's questions. As the title of the document table of contents and table contents illustrations announces of and links to the content "excluded", to avoid breaking links to these topics, they have been added to the output files, but do not show up in the table of contents.  However they would be in the research because they were in the output files.

  But that didn't fix it 100%... (grrr...)

  Additional inspection (and more hair removed), I found that I had created a mapping file until I put on the information of conditional markup compilation.  Even after deletion (of the document) Table of contents and the aforementioned tables, some of the information which was to exclude was always put in the output files, was discoverable by search.  Once, I edited the map file and labeled or deleted sections links to the topics of "undesirable". I was able to get a clean build.

  So he did what I wanted now.

  NOTE: I had not created an Index or a Glossary for this project yet, but I'm sure they would have needed to be cleaned as well if I had taken the time to create them.

• You can restart AE comp in the queue that has been updated?

  Whenever I have reset the status after changing the comp in AE and savings, it seems to "remember" the comp in the State, it has been added to the Media Encoder. I don't understand how this is useful at all. It would be much better if I could have all my comps saved in Media Encoder and then I could just fire and code once I updated my work. Have to select the output folder and rename the output file when we work on 40 + restores at the same time is a waste of time.

  Am I missing a piece of workflow for this?

  After making changes to a composition in After Effects, you must choose Composition > add to the Adobe Media Encoder queue again.

  When you use the add to the command of the Adobe Media Encoder queue, After Effects takes a snapshot of the current state of your model. This snapshot is saved in a file temporary .aep, and that's what Adobe Media Encoder uses for rendering.

  The advantage of this workflow is that you can start the version of your model rendering, and then continue to work on B while version than version is rendered.

  Another way to add After Effects compositions to Adobe Media Encoder is to choose file > add After Effects Composition. In this dialog box, you can choose the initial project of the source, and then select one or all the comps in this project to add to the queue.