the system image create fails with the error e/s

Similar Questions

• The database recovery/restore failed with unexpected error 509

  Hello

  The database recovery/restore failed with unexpected error 509

  In the Event Viewer, I had this error SEVERAL times every second.  He goes absolutely crazy.

  I don't know what to do with it.

  I'm with Windows 8 Pro running on a very stable computer with 8gig of ram, plenty of hard drive space.  Each single drivers updated Windows Update.  Everything is really clean except this error in Event Viewer

  Svchost SRUJet (1624): database recovery/restore failed with unexpected-509 error.

  Task category: registration/recovery

  Esentutl /p /r tried / everything but nothing wrong was found with those

  Thanks for any help.

  Exactly the same problem, nothing Microsoft recommended was the cause, scannow and DISM commands are returned without error.

  So I went to the event viewer and scrolled down to find, when these errors began to occur. So I found a few entries initially saying things like: an attempt to move the file 'C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\EDB.log' to 'C:\Users\xxxxxxxx\AppData\Local\TileDataLayer\Database\EDB00008.log' failed indicating system 183 (0x000000b7) error: "cannot create a file when that file already exists.

  Then, I went to C:\Users\xxxxx\AppData\Local\TileDataLayer\Database\ and removed the files listed (e.g., EDB00008.log).

  Bingo, the errors will stop immediately.

• connection fails with an error via the Proxy OUD

  Have hit a problem with the Proxy of the OUD. If the recorder file or admin-based access is turned on, the link fails with an error

  Below error

  The result Code simple bind attempt failed: 80 (other) additional information: Worker Thread 44 has encountered an exception uncaught during the processing of operation BindOperation (connID = 97, opID = 0, Protocol = "LDAP 3, dn = cn = oudadmin, authType = Simple"): NullPointer

  Hello

  I think that the conditons of occurrence are more complex than just enabling newspapers, but this looks like a bug.

  Please contact the Oracle Support so that a default is created.

  -Sylvain

  Please mark this answer as correct or helpful, when it is appropriate to make it easier for others to find

• Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  Cloud to adobe InDesign download fails with shoing error it can not extract the files in the temporary file.  I tried several times and restarted does not.  What can I do about it?

  To refer to EX11 some:

  Creative cloud (WIP) error codes | Error postal codes of Mylenium

  Mylenium

• Windows Update KB979482 always fails with 8007065E error code

  KB979482 fails with 8007065E error code. All other updates are successful.

  Running Windows Vista Edition Home Premium SP2.

  Here are a few excerpts from C:\windows\windowsupdate.log:

  ... ~ snip ~

  DnldMgr * updates to download = 1
  Agent * title = update security for Windows Vista for x 64-based systems (KB979482)
  Agent * UpdateId = {8D253BCE-EB56-47C2-AA58-E5D3F7173CC9}.103
  Agent * bundles 1 updates:
  Agent * {BD1DEFF4-A43A-455A-8174-6050A6010AE4}.103
  ... ~ snip ~

  Automatic update fails...

  ... ~ snip ~

  Manager of FATAL: UH: 0x8007065e: CreatePackage failed in CCbs::CreatePackage
  Manager of FATAL: UH: 0x8007065e: StartStagePackage failed in CUHCbsHandler::StageCbsPackage
  Generation of FATAL Manager: request for CBS full update with hr = 0x8007065e and pfResetSandbox = 0
  Manager of FATAL: Source of error is 106.
  FATAL DnldMgr: DM:CAgentDownloadManager:GenerateAllDownloadRequests: GenerateDownloadRequest failed with 0x8007065e.
  DnldMgr error 0x8007065e occurred when downloading update; notification of dependent calls.
  ... ~ snip ~

  So I tried to download KB979482 here:

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=9622 and run it standalone.

  However, when I try this, Windows Update Standalone install displays the message"this update does apply to your system."

  I can live with that (if the message is actually true). But if if this patch does not apply to my system, then why Windows Update keep trying to install it as an update 'important '? How can I get off the list so that the Windows Update log is not cluttered with all of the failed attempts?   Finally, I ran Windows Update Fixit tool available.  He fixed a couple of things (default location, another minor config) but not this problem.

  P.S. running BitDefender 2012 if it matters...

  To answer my own question, you can reset the status of the following method KB2509997 8 download and rename the folder C:\Windows\SoftwareDistribution. It would be nice if there was a less force brute to do this, because she loses all your update story and settings, but at least it works.

• Failed with unknown error 80070490 Windows Update

  Update Windows guard fails with unknown error 80070490 when trying to install to install the important updates made automatically by Windows Update. Having this problem since February 10

  http://support.Microsoft.com/kb/958044

  'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'

  Method 1: run (Checksur.exe) system update readiness tool

  1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
     947821 (http://support.microsoft.com/kb/947821/) Description of the system update tool for Windows Vista, Windows Server 2008, Windows 7 and Windows Server 2008 R2

     http://support.Microsoft.com/kb/947821/

     Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  2. Try to install updates again.

  Method 2: perform a Windows repair installation

  If method 1 does not resolve this problem, you must perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

  See you soon.

  Mick Murphy - Microsoft partner

• Backup fails with an error of device 0 x 807812.

  Original title: device error 0 x 807812

  Backup fails with an error of device 0 x 807812. I tried a disk of 1 TB of my book and a Seagate 1 TB Western Digital. Both failed with the same error. The system says that I have the most recent and correct drivers. My computer is Deel Latitude 17r.

  Hi James,

  Thanks for posting your question in the Microsoft Community.

  The error would have occurred if the services associated with Windows backup may have been disabled, you can try to restart the service, follow the steps below:

  1. click on start.

  2 type Services in the start search.

  3. in the search for Windows Services of shadow copy Volume in the list.

  4. right click on the Service.

  5. click on properties.

  6. Select the Startup Type to manual.

  7. click on OK.

  8. repeat the same for the service Windows backup.

  If the problem persists, then I suggest you run the chkdsk command, which fix chkdsk errors, follow these steps:

  i. Click Start.

  II. type cmd in the start search box.

  III. right-click on cmd.exe list programs and then select the run as Administrator option.

  IV. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  v. in the command prompt window, type the following command and press enter Chkdsk /R

  VI. o press when you are prompted to check the drive the next time the system restarts.

  VII. close all applications and restart the computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  When you restart, Windows checks the drive for errors, and then Windows starts. Now run the disk check in command prompt, follow the steps below:

  Now, when you try to perform the backup, I recommend that you can try to disable the temporary security on the computer software and perform a backup, be sure to activate security in the computer software.

  Disable the antivirus software:
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  If you need further assistance on this topic, let know us and we will be happy to help you.

• Installation fails with "internal error 2502.

  I have a client that is running Windows Vista Home Premium (32 bit) and my application setup CVI-built fails with "internal error 2502.

  This installation kit has been deployed successfully on hundreds of computers with different versions of Windows, and I never saw it. No device drivers or advanced libraries - just standard execution. I use CVI 9.0.1.

  Some old problems with the Office installation, date/time settings etc. of research show very little - but I still found nothing which indicates what means this error.

  Ideas or ideas very welcome.

  Thank you

  Ian

  Thank you love. It seems that the problems #2 (permissions) were part of it and possibly other problems linked to the virus. It will re - open this computer from scratch. Detective Conan.

• Upgrading ESX host to day 4 fails with an error "Unable to download .zip bundle offline."

  I run the command update the host ESX below. It fails with an error. I used the same command to update the first host in the same cluster and that worked. Try with others and that she fails.

  esxupdate - bundle = / vmfs/volumes / < data store name > //update-from-esx4.0-4.0_update04.zip updated
  Encountered error BundleDownloadError:
  The error data are:
  URL - vmfs/volumes / < data store name > / update - from -.
  ESX4.0 - 4.0_update04.zip
  LocalFile - / var/cache/esxupdate/bundle7107600307711814965/update-from-
  ESX4.0 - 4.0_update04.zip
  Message - file remote vmfs/volumes / < name of data store > //update-from-
  There is no such thing as ESX4.0 - 4.0_update04.zip.
  Errno - 26
  Description - could not download .zip bundle in offline mode.

  Any ideas?

  Try first to install the fix for shared data and store that if an error occurs, try to install it from a local. As I recall (we work with vSphere 5 for a long time), we were unable to find the reasons why the update for ESX 4 is not installed since the shared data store, it can be at the level of patches, can be a history of the host...

• Reconstruction (Fast) of the collection fails with csQueryNotFound, error IidcTextots1

  We use the OTS to our UCM 11.1.1.4 implementation with only metadata for indexing.
  We added a few new metadata and ran Collection rebuild (fast regeneration).
  
  While he was in a State of cleaning at the end of reconstruction, our system DB files containing data files became complete.
  This caused our Collection rebuild (fast regeneration) due to cleaning, State = Interrupted =
  
  Content Server records showed the error:
  An error occurred while indexing. Cannot run the query"UallIndexerState(UPDATE/*+ INDEX (Revisions dIndexerState_Revisions) * / revisions)
  SET dIndexerState = "
  WHERE dIndexerState = ' ')'. ORA-01013: user has requested the cancellation of the current operation
  java.sql.SQLTimeoutException: ORA-01013: user has requested cancellation of the pending operation. [Details]
  
  wwScsLogDetails_Info
  ! csIndexerError! csDbUnableToExecuteQuery, UallIndexerState(UPDATE/*+ INDEX (Revisions dIndexerState_Revisions) * / revisions < br > SET dIndexerState = "< br > WHERE dIndexerState = ' ')! $ORA - 01013: user has requested the cancellation of the current < br > operation! syJavaExceptionWrapper, java.sql.SQLTimeoutException: ORA-01013: user has requested the cancellation of the ongoing operation < br >
  intradoc.data.DataException:! csDbUnableToExecuteQuery, UallIndexerState(UPDATE/*+ INDEX (Revisions dIndexerState_Revisions) * / revisions)
  SET dIndexerState = "
  WHERE dIndexerState = ' ')! $ORA - 01013: user has requested the cancellation of the current operation
  
  Our DBAs extended then the data files, and we tried to restart again the Collection rebuild (fast regeneration).
  Somehow, he began where he had ended. Yet once, it failed with the same error as above.
  
  Then we restarted our servers of the University Complutense of MADRID and he was always at the State cleanup, State = Interrupted = poster
  We again tried to run the rebuilding (Rebuild fast) pieces and this time it crashed almost immediately with the following error: index 20:07:03.111

  reconstruction work systemdatabase/6 08.11 batch datasource request added at index 0: IidcTextots1
  indexer/6 08.11 20:07:03.111 index reconstruction work cannot add commands: intradoc.data.DataException:! csQueryNotFound, IidcTextots1

  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.jdbc.JdbcWorkspace.addBatch(JdbcWorkspace.java:412)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.OracleTextHandler.batchExecution(OracleTextHandler.java:480)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.OracleTextHandler.updateDocuments(OracleTextHandler.java:429)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.OracleTextHandler.executeIndexer(OracleTextHandler.java:250)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.IndexerExecution.executeIndexer(IndexerExecution.java:597)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.IndexerDriverAdaptor.executeIndexer(IndexerDriverAdaptor.java:144)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.DocIndexerAdaptor.indexList(DocIndexerAdaptor.java:209)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.DocIndexerAdaptor.finishIndexing(DocIndexerAdaptor.java:131)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.DocIndexerAdaptor.indexDocument(DocIndexerAdaptor.java:156)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.IndexerBulkLoader.createBulkLoad(IndexerBulkLoader.java:367)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.IndexerBulkLoader.doWork(IndexerBulkLoader.java:171)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.Indexer.doIndexing(Indexer.java:411)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.indexer.Indexer.buildIndex(Indexer.java:319)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.server.IndexerMonitor.doIndexing(IndexerMonitor.java:1021)
  indexer/6 08.11 20:07:03.111 index rebuilt work to intradoc.server.IndexerMonitor$ 4.run(IndexerMonitor.java:842)
  
  
  
  Has anyone seen these errors before? Pointers from your experience?

  Hi David,

  (1) will disrupt it my collection research currently active? (My current collection of search works well, the documents are get properly indexed except on the new metadata)

  If new content get indexed properly, and then ignore the part of reconstruction of collection.

  (2) we look forward to perform the Collection rebuild with the option rebuild quickly. What are the chances of landing in a situation where we can to perform a full rebuild of Collection (we have > 2 M documents and who is consumea a lot of time and resources at the end server; and therefore our worst fears)

  Fast reconstruction is really needed when we have new fields of metadata added and need to be searchable.

  If this is where the problem happening, might then need some tracing more as an indexer *, systemdatabase with lots of comments for the following steps:

  1. Add a new custom metadata

  2 update Db configuration manager applet

  3. fast reconstruction

  4 to record with the new field populated and then perform a search.

  Capture the output of the server, then it must be analysed.

  Can you post the exact version of AAU where this problem arises and the version of DB? Copy the tag of version under AAU - Administration - Configuration information and posting it here.

  ORA-01013: user has requested the cancellation of the ongoing operation - is this still an active issue? If so, my suggestion would be to restart the receiver DB / service to clear all process of dead / guillotine.

  Thank you
  Srinath

  Published by: Srinath Menon on 16 August 2012 13:53

• vCenter esx 5.5 - consolidate the snapshot fails with an error occurred by consolidating the discs: msg.snapshot.error - NOTFOUND?

  I don't know why is this error?

  I got an error that the virtual disk space was low tool and my vm has been automatically turned off.  I scoured the data store and I saw old clichés that were very important which could be removed.

  I went into the Snapshot Manager and has tried deleting them and started getting the error msg.snapshot.error - NOTFOUND.

  The clichés that I deleted since the Snapshot Manager always appear when I browse the data store, but are locked.

  I really need to be able to consolidate these pictures in the parent company.  100 GB free on the store of data right now.

  If I try to take a new snapshot it fails and says: an error has occurred when taking a snapshot: msg.disklib.OPENPARENT.

  I also noticed after the fact that my hard drive is pointing to the most recent snapshot rather than to the parent.

  I think if I edit the .vmx file and change it so that it points to the parent would be the load, but then I will not lose the clichés?

  I like to keep at least the most recent roll in parent company snapshot.

  Any ideas?

  Thank you!

  Erin

  Hello!

  Thanks for the reply.  Unfortunately, a part of the problem is that the data store was running out of space.  If I didn't have space or time to try a clone.

  I did a reboot and after that has been able to update the CID to get the right string after I changed the hard drive to point to the base file, power, created a snapshot, turned off and pointed to the hard drive in the last snapshot.

  But there was a corrupt, one in the list since my VM corrupted after all the snapshots consolidated (+ 6 hours later).

  I didn't have a lot of time to continue to troubleshoot or try a clone on another virtual server, we have little space so I started from scratch.

  Fortunately, I discovered that my backups of the data have been very well, I so reinstalled Windows and started from scratch.

  Thanks for the suggestion though!

  Hope this helps someone else because I just watched as he went to work, and I don't know if a clone would have gotten it going or not.

  Erin

• VSphere Web client and client heavy cannot connect to Vcenter server 5.5, web client fails with 2032 error before the connection, then the work after one minutes ferw.

  Hi all

  I really need help here.  I have a new installation of Esxi5.5 and installed the server vcenter build 5.5.0.5201 device 1476389.

  I have host files properly configured for DNS and Server 2008 R2 running that I use to connect with the client or web client heavy.

  Initially, I get an error with the web client to connect, he began to paint Vmware and when it comes to 'r' in the name it fails with #2032, so I can no longer

  access the page at all, he says: connection refused for the page. If I wait a while I can connect again.

  heavy client vSphere fails at this time as well.  However, I cannot communicate directly with Vsphere client to server esxi host and it works all the time.

  There seems to be a problem with the device of vcenter server because the thick client fails, and does not open a backup program using vcenter server

  inventory when this happened.

  Please help, it drives me crazy...

  Dan

  Hello

  Since I found the solution to the problem of connecting to the device of vcenter.  It is a conflict of IP address on the network.  There was a machine with the same IP address virtuall

  as the vcenter server.  This caused intermittent problems etc.. Why web client would still work if I have the vmware client open I do not know

  so thank you for your help.

  Dan

• The cube update fails with an error below

  Hello
  
  We are facing this problem below when planning application database update. We've been refreshing the database daily, but all of a sudden the error below appeared in the newspaper. The error is something like below:
  
  
  The cube refresh failed with the error: java.rmi.UnmarshalException: error demarshalling return; nested exception is:
  java.io.EOFException
  
  
  During the updating of the database is manual workspace, the updating of the database that happens successfully. But when the unix script, its lift the above error.
  
  There is some question related provisioning for which the user has been removed from MSAD? Please help me on this.
  
  
  Thank you
  Mani
  
  Published by: sdid on 29 July 2012 23:16

  have you tried restarting the RMI process for planning and then check that it runs without a doubt 11333 port

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Backup failed (System Image) of network storage (NAS) - Error Codes 0 x 81000032 and 0x8078011D

  I recently got a new DELL workstation, and I'm trying to set up the automatic backup feature.  I am running Windows 7 Professional 64-bit, and our office uses a Synology NAS device as a file server.  The NAS device has 1.34 TB of total space, 1.3 TB of free space and is in NTFS format.  I have traced (persistent) several places on the NAS as readers on workstation.

  I tried to backup my workstation to the NAS (network location), but it didn't give me the error code 0 x 81000032.

  When I changed the backup settings so that the backup did not include an image of the system, the backup was properly executed.

  I tried to create a system image (link on the upper left of the control Panel\All Control Panel Items\Backup and restore screen).  The image has failed and gave me the error 0x8078011D code, informing me that the recording location was either: (1) not a reader fixed, (2) no NTFS, or (3) read-only.  I know that the save location is NTFS and is read/write; and as I mentioned earlier, it is a network location (a NAS device).

  I thought that maybe because I have traced other network locations NAS as readers on 'My Computer', that when it came time for the image of my system, the backup was trying to picture to all my readers, including the mapped locations of NAS.  If she did this, I thought that it may fail because there is not enough space on the NAS in order to imagine NAS locations mapped as well as my workstation.

  So, I unplugged my mapped drives (NAS locations) and tried to make a manual backup, including the image.  That did not work.  I also tried to create an image as shown above.  That did not work also.  Also, I went into services.msc and fact ensure that the shadow copy of Volume has been set to 'Automatic', started the service and restarted my computer.  Backups don't always work.

  My question is: How can I run a backup that includes a system image and store this backup and image on the NAS Server?  Remember, I want to be able to set the schedule and forget it with the backup occurs automatically when I do not use my work station.  Keep in mind that I can run a backup if the settings do not include the create a system image.

  -Update-

  Here's an idea: on my Dell workstation, I have a disk drive (d :)) (I think to be able to read emails without having to start the computer?) who is FAT 32...) This could be what is causing the problem... because the backup cannot create the image of a FAT 32 on a NTFS drive?  (I know that he cannot back up on a FAT 32 drive).  If so, can I change it by going to cmd (as an administrator) and type CONVERT D:/FS: NTFS?  Or is there a way I can exclude the drive D: (FAT 32) of the image?

  I would be grateful for any help.

  You must post this question in the forums technet for a better answer.

  http://social.technet.Microsoft.com/forums/en/categories/

• Utility error system image creating NetRestore Image 2

  Hello

  I s 2 constant error trying to create a picture of NBI NetRestore using System Image Utility 2 (Version 10.11.2 (778)).

  NetBoot and NetInstall work without error, but NetRestore won't quite work. The iMac I use is in target mode and mounted on a 10.11 Mac OS Server.

  This used to work wonderfully in Yosemite, but now it is a total nightmare...

  What I'm missing here?

  Thanks for any help...

  DD

  iMac, retina 5K 27 "end 2014

  The first thing you can do is set the verbose logging level. This will allow you to understand which tool (probably hdiutil) generated the error.

  If you only have problems in making images of existing volumes, I would start by checking the integrity of the volume with utility disk or another tool.