The system is slow and erratic.

Similar Questions

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.

• I ran the system analysis tool and without result updates still won't work.

  * Original title: Windows 7 updates

  It seems I'm not the only one having problems with the updates of Windows 7. I ran the system analysis tool and without result updates still won't work. Is it possible miss me a the question .dll file not showing? I googled about it and still nothing.

  Appreciate any info someone might have on this

  Are there specific error messages or error report numbers given when it fails, or is it just apparently running, but does not find anything?

  If it is running, but apparently not finding anything, just leave it for a while 'loooooong. It was reported a few recent Wu take many hours to find anything, esp if she has a lot of updates to find and install.

  If its reports an error/message number, what (exactly) do report?

  Something to try:

  Update your anti-virus software and run a full scan. Then:

  If its doesn't work, check that service 'Windows Update' and 'Background Intelligent Transfer' are listed and running, according to the instructions of the ' how to check if services are running' section of this article - https://support.microsoft.com/en-us/kb/2730071 IF you have actually the error referred to in article, try the FixIt.

  If WU and BITS services are listed and running, try to reset the Windows Update components - https://support.microsoft.com/en-us/kb/971058

  If still no joy, run the update utility - http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter what makes as that report?

• The response of the mouse becomes slow and I get the low battery warning

  Original title: Use the Microsoft Wireless Multimedia Keyboard 1.1 model 1014.  Recently, I had replace the batteries in the mouse at least once a week.  Is there a solution?

  The response of the mouse becomes slow and I get the low battery warning.  Until this started happening batteries have been change less than a month.

  Hello

  1. What is the brand of mouse and the model?

  2 have you ever done any recent software or changes to the hardware to the computer?

  If you use the Microsoft mouse, I suggest you follow these methods:

  Troubleshoot a wireless mouse that does not correctly:
  http://support.Microsoft.com/kb/321122

  Troubleshoot the incidents of the response to the mouse or wireless keyboard:
  http://support.Microsoft.com/kb/838398

  Use the following tips to get more life on the batteries in the keyboard and mouse:

  a. use the mouse on a surface of clear color. With the help of the mouse above a black surface can deplete the battery at a faster pace.

  b. do not use the mouse on a glass surface.

  c. when replacing the batteries, use alkaline batteries. Other types, may not last as long.

  d. when wireless devices are not in use, store them near the computer.

  I hope this helps!

• The mouse cursor slows and freezes

  Original title: cursor freezing

  My cursor continues to slow, gets slow-and then freezes, if this problem a support or can I fix it I?

  Hello

  1. What is the version of your Windows operating system?

  2. What is the brand and model of the mouse?

  3. did you last changes before the show?

  4 when was the last time it was working fine?

  Please click on the links to solve the problem.

  Method 1:

  Step 1:

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You need perform a clean boot to prevent possible ask contradictory to interfere with the installation of the updates.

  To put the computer in a clean boot State, you must follow the steps in the article mentioned below

  http://support.Microsoft.com/kb/929135

  Note: You must follow step 7 of the article mentioned above to recover the computer to Normal startup after you complete all the steps.

  Method 2:

  Mouse, touchpad and keyboard with Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/Mouse-touchpad-and-keyboard-problems-in-Windows

  Method 3: Scan your computer by using the Microsoft Safety Scanner by clicking Download now:

  http://www.microsoftsafetyscanner.com/

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  I hope this helps.

• the system is slow

  Original title: slow

  My system is slow, but I use Escan antivirus and pccleaner,
  Why my system is slow, what should I do?

  Hello

  ·          When the issue started?

  ·          Were there changes before this show?

  Try the procedure described in the following articles:

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

  http://support.Microsoft.com/kb/310419

  Note: If your computer is still not as fast as you'd like it be, you might consider update to Windows 7

• The system is slow to detect Wifi

  My laptop has suddenly the slow problem as wifi detect, whether before, after the log on the laptop, the wifi detector shows directly access to the internet, but now I have to wait a few minutes, and then only have access to the internet. I don't know if the wifi detects becomes slow after I do system restore or uninstall and reinstall McAfee. I hope I can get solutions here. Thank you.

  Hello

  Method 1:

  I suggest you to see link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  I suggest you to see link and check.

  Why is my Internet connection so slow?

  http://Windows.Microsoft.com/en-us/Windows-Vista/why-is-my-Internet-connection-so-slow

  Method 3:

  I suggest to download and install the Microsoft safety scanner and run the scan and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  See also:

  Ways to improve your computer's performance

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance

  Optimize Windows 7 for better performance

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

• IPad 2 running slow and erratic

  I have a 2 64 g ipad it is two third full but is unresponsive and erratic at times. A factory reset would be worth trying, if yes, what should I do to get back the information later. It is updated to the last update.

  Here are some great suggestions from MichelPM: https://discussions.apple.com/docs/DOC-10344

• When I try to run the Vista system restore, I get the message that the restoration of the system is 'off', and there is no screen to turn it back on.

  The message said that "the system protection is turned off. "Turn it on again you can use system restore. The screen that is supposed to appear when I 'click' to enable system restore, does not appear and I get no options of system restore turn it on again. I don't know how he got off in the first place.

  Hi Rod,

  Let's start with a clean boot.

  Note that it is very important to "Hide all Microsoft Services" so that we do not destroy our restore points:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Best regards

  Matthew_Ha

• Problem into a problem: the System 32 error and Start Up Repair error (VISTA)

  Hello, on a reboot of my computer yesterday, I came with the System32/config/system is damaged or missing error on boot the system.  I tried a few solutions that can or could not apply, such as commands to the command prompt and reboot system Windows RE tool.  None have worked and false start in the repair process.  A description of the error, try a Start Up Repair less than a minute by:

  Problem event name: StartupRepairv2

  Signature of the problem 01: external Media

  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000

  Signature of the problem 03:0

  Signature of the 04:65537 problem

  Signature of the problem 05: unknown

  Signature of the 06 problem: NoOSInstalled

  Signature of the problem 07:0

  Signature of issue 08: 1

  Signature of the 09 problem: difficulty of Partition Table

  Signature of the 10:1168 problem

  OS: Version of the 6.0.6001.2.1.0.256.1

  Locale ID: 1033

  So, if there are solutions outside the Startup Repair tool, I would apreciate gretaly them.  I hope not to lose all my files with a new facility.  Finally, I would be able to upgrade to Windows 7 in this position (fixing the problem)?

  Thanks in advance for any help.

  Hello

  you need a system upgraded to windows 7 from vista operational management

  Data recovery

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method 3 depends on your hardware in the computer that failed

• I have a problem with the computer is slow and does not file.

  1 of my pc and 1 another laptop, both with same OS - win 7 starter, atom and same ram and Ghz processor.

  The the Task Manager on the two of them performing at about 50%
  I use wifi and same place,
  always pages on my pc are load too late, manyatimes same gmail takes more than an hour to load or load never at all.
  Live TV on my pc crashes a lot and the clarity of the video is too bad, although the same graphics card, wifi, etc. are used.
  Any recommendation to get rid of these problems?
  2. some viruses had infected my pc,
  I tried to scan my pc and the USB with 2 antivirus free and pay different and even contacted the companies and sent them files. But I got no solution.
  On my pc, the files opens, show that a few errors before you open it then on my cell it do not open at all. Only shortcuts are displayed, while the USB is to have 4 GB of data.
  The companies had scanned all files that are intended for them and had recommended some solutions, but none of them worked and I was faced with the same problems.
  It was queries that I had sent to the antivirus company-
  10-20-bitdefender files that are
  > infected. They were initially on my USB, then I connected to another
  > pc. After that, when I connected to my pc, I scanned and that she was
  > no virus. Then the ameliiecouturiaux and the files whatever i seclect opened in a
  > new window and took that wasannoying time. So I copied all the files to my
  > pc, yet once scanned, formatted my USB and then comes the againNow copiedit the
  > problem - all the icons or folders remain the same with the name of the folders but
  > the files inside this foldergot automatically changed and I lost all my
  > data. Now, I can't find any of my files on my pc or my USB. PL send me
  > an email so that I canattach the files and send them to bitdefender. Dungeon of pl
  > secure these files. Some files have an another new error that I had
  > downloaded. More files will be downloaded once I have bitdefender recieveemail to
  
  > that I can answer. PL copy this message in its entirety and add this to your answer.
  According to my knowledge, 2 of my PC are infected and the virus are not getting detected by bitdefender on my PC1 but 4 threats have been detected on the laptop...

  The same files are include the other way on my other pc.

  Whenever I open the files, save option opens and a new file is saved with the file tha but they never get to open in word or powerpoint, only the backup option is displayed.

  The original files are protected by copyright and are lost. PL help me if possible to retrieve and delete all the files once the inspection is completed. You can forward this message to any authorized person.

  Attached files have changed to 1 or 2 k, but there was initially datas in a few MBs.

  201310131003535. I mentioned that somewhere I had formatted the USB key. Just before that, I had copied all files by selecting CTRL A and cut all the files in a directory on my PC. Then I opened the USB and no files were there. But always around 4 GB has been shown as being busy on the USB stick before formatting.
  My pc takes too long to restart, I tried a few 3 - 4 times and no updates have been installed or waiting to install after the 2nd time but when even he took more time than usual to restart and is compared to the other pc taking 2 X the time to restart, but two of them have installed bitdefender. Problem in my laptop toshiba, not pc lenovo, space time with more than 50 percent on the disk processor and Atom c.
  The files on my USB key are automatically replaced by shortcuts and so files open in a new tab and new cases opened are not those of origin who have been saved by me in this matter. Yet once I formatted and scanned, files, pc and USB but still facing the same USB key.
  Problems-

  1. all files are automatically displayed as shortcuts, even if I had pasted the original file

  2. once I click on open, I get an error and then after clicking on ok, some files get opened

  Before sending the email, I had formatted the USB scanned files on my HARD drive and then copied on the USB. The same problem persists. I think that when the files are displayed or open, the virus does something and change his behavior wrongly.

  1 bitdefender watch as new bitdefender is available, I click ok and repair wire starts and then it tells the system to restart.this cycle continues on the race

  2. 2 files are missing (attachment)

  3. could you send me the file by e-mail?  You can also download the link below.

  http://labs.BitDefender.com/

  because the webste or browsers (chrome, firefox) are not respongding.

  4. I could get these 2 points. Browse your computer to locate the removable storage device and right click

  its icon.
  3. in the shortcut menu, point to Bitdefender and select immunize it
  
  drive.
  I am able to open my pendrive ffrom on 1 pc but on my laptop, all the files don't appear as shortcuts 1-2 KB and can not access.
  zwhwenever, I click the icon, the window save under opens for all files.
  on this pci usingbitdefender antivirus am more 2013 16.34.0.1913 downloaded from download.com and the antivirus from bitdefender 60 seconds. 1.0.3.59
  my pc shows the USB key as safe, but laptop with 2 antivirus mentioned above are showing 2 virus - worm.vbs.ch (bitdefender 2013)
  using bitdefendr 2013 more on laptop, I tried to immunize the file but an error was encountered.
  the error is in German-
  Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. I closed all the files and tried to immunize the USB of the my computer without having to open the USB by clicking on it.
  Itried to remoe and atach the pendriveagain and even restarted the laptop, but the same error message appeared.
  Properties - 5.10 GB ref 7.89 GB, but when the USB wasopened, all files were only 2 or 3 KB of size.
  1 more problem-i tried to delete the files in quarantine but bitdefender stopped working and went off automatically.
  I copied all the files from USB to pc, they were 2.22 GB, then again, I copied them back after scannig and formatting of topendrive and it was only 1.44 GB
  BitDefender Antivirus 2013 never works and always displays the message to restart the laptop so that it can start working, but it neverstarts. But bitdefendeer 60 seconds work.

  LOL - install software Registry Cleaner to fix damaged or broken registry entries.

  More likely to worsen the situation.

• I can only work with preview of overprinting on enable visible photos. The program is slow and unstable.

  Work on Macbook Pro at home. No photos in the InDesign layout are visible, unless the OPP is turned on. The result is a very slow and unstable working meeting - wasting time!

  Yes! Thank you. I put photo display performance that presented themselves and of high quality. Really appreciate your help

• My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is installed and running on the SSD, with my old drive system currently used for storage a

  My Windows 7 Professional Office system disk has been corrupted and I took the opportunity to install a SSD for a new system disk and reinstall Windows.  The system is in place and running on the SSD, with my old drive system now used for storage as it is still readable.  The only product Adobe, that I reinstalled so far is drive XI but I would like to reinstall items 8 and Acrobat 9 without occupying more licenses that both are also installed on my laptop.  Can you tell me the best way to do it?  -Thank you

  If you have two activations allocated already and one was lost on the hard drive that has failed, then you must contact the Adobe Support via chat and ask them to reset your activations.

  To the link below, click on the still need help? the option in the blue box below and choose the option to chat...

  Serial number and activation support (non - CC) chat
  http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC )

• is adobe reader, acrobat requires a reboot of the system for installation and improvement

  is adobe reader, acrobat requires a reboot of the system installation and improvement?

  Hi Harish,

  If you install it for the first time, it does not require a reboot. But if you repair the installation, it will require a reboot.

  Some quarterly updates require reboot. It also depends on when was the last time you rebooted the machine for the changes to apply.

• What is the "system idle process" and why it seems to freeze my Windows XP and show the 99% CPU usage?

  This problem sometimes occurs when my computer starts. Today, it happened and actually picked up my internet connection, which also won the update of Flash Player and Internet Explorer open. Also, I couldn't get the Start Menu to open. What is happening to the CPU is too busy doing something else? Is there a way to refresh the process or the CPU?

  Hi Hope_H,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  4. you receive an error message?

  Checking service or program uses high processor usage by using Task Manager.

  To view the CPU usage, press CTRL + ALT + DELETE, click Task Manager, and then click the performance tab.

  Overview of the Task Manager

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/taskman_whats_there_w.mspx?mfr=true

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.