The SystemSettings.exe version 6.2.9200.16384 program ceased to interact with Windows and was closed

Similar Questions

• The iexplore.exe program ceased to interact with Windows and was closed

  The version of iexplore.exe 9.0.8112.16447 program ceased to interact with Windows and was closed

  This happens from time to time only.

  Hello

  Follow these methods.

  Method 1: I suggest that scan you Chccker file system (CFS) on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:  If Internet Explorer does not work, you can try to disable Internet Explorer and then enable the feature that is as good as the uninstall and put it back.

  Follow the steps below to do the same.

  To enable or disable the Internet Explorer, follow these steps:

  a. click the Start button, select Control Panel, click programsand then click Windows turn on or off features. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. uncheck Internet Explorer. Click OK and restart the computer.

  c. now follow the same steps to activate Internet Explorer by selecting the checkbox.

  Access the link for more information on the above steps to turn off or on the features of Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-off

• The failing application name: backgroundTaskHost.exe, version: 6.2.9200.16384, time stamp: 0x5010a827

  Why I get this error.

  Why I get this error.

  I also found the same mistakes repeatedly in my newspaper every 15 minutes on my new system.

  I decided to go with a Local account, so I did not sync services.

  WARNING: I am not a technician or professional support.

  Possible solution: uninstall box (if you need to synchronize with your Microsoft Account services)

  How to: Search for settings to laptop, then select search and Apps, then select sizes of App, select application box, and then click Uninstall. Now, wait 15 minutes and refresh you the application log.

• Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected.

  Original title: received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  Has received a warning about the following: the file wmplayer.exe, version no. 11.0.5721.5145 where 12.0.7601.17514 was expected. How to find and update the file, please.

  You try to install Windows Media Player 11?

  Try to run a scan of the file system to see if he can fix it: http://support.microsoft.com/kb/929833

  You can also try a system restore: http://windows.microsoft.com/en-US/windows7/products/features/system-restore

• CAgent32.exe stopped working and was closed at the start of windows.

  Original title: CAgent32.exe stopped working and was closed

  Whenever I start my computer a Windows tab will appear that reads CAgent32.exe stopped working and was closed? How can I fix it? Thank you

  Hello

  1. what happens when you try to uninstall or disable the program?

  2. you receive messages or error codes?

  3. have you made a recent software or hardware changes to the system?

  You can read the following article and try to run the Fixit and check if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

• 34957172.exe has stopped working and was closed. Windows error message

  Since the installation of Service Pack 2 for Vista, I receive the following error message that causes my computer to freeze - "34957172.exe has stopped working and was closed.  A problem with the application to stop functioning properly.  Windows will notify you if a solution is available. "How can I solve this problem

  Hi SherriTeille,

  (1) what is you receive the exact error message?

  (2) when exactly you get the error message?

  Method 1: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:  Put the computer to boot and then check if the problem persists

  Follow step 1 in the link below,
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not to put the computer to a normal startup follow step 7 in the link

• Receive the error "Windows Media Center Receiver Service stopped working and was closed" after the video card replaced

  I have a HP computer with Windows Vista Home Premium (32-bit) Service Pack 2.  He has a VISX PureTV tuner card and already had an NVidia GeForce 8400 graphics card.  This Setup has worked well for 2.5 years until what the graphics card died last week.  It has been replaced with an ATI Radeon HD3450 and both all Windows updates have made current.  Since that time, the TV tuner did not work.

  When you sign in to an account, it gives the error message "Windows Media Center Receiver Service stopped working and was closed".  I can use Media Center to watch the recorded video before, but if I try to watch live TV he hangs up and close Media Center.  If I try to configure the TV connection in Media Center it tells me that there is no tuner card.

  I looked at the map and see no problem and I tried it back in place.  He has the most up to date drivers (so does the new Radeon graphics btw).  I tried "Uninstall" in the Manager of devices and then put it back, but it was not good.

  "Windows Media Center Receiver Service Stopped Working and was closed" I tried all the fixes I've seen this error.

  I tried all the things I saw here and elsewhere related to this issue.  I did a "clean boot" with all non-Windows services and the disabled startup process.  He always did the same thing and gave the same mistakes.  It seems to be linked to a Windows service, and I hesitate to begin deactivation to track down.

  I ran 'sfc' in mode 'cmd' and he found no problem and none of the files to be fixed or could not fix.

  In the list of services, I changed the login for "Windows Media Center Receiver Service" to "Local System account", Local Service, Network Service and individual accounts, but no permits.

  I'm afraid I'm at the point of having to reload the Vista, but I don't know how to do this and want to avoid at all costs.  I don't have the recovery disks and software.  Is this enough?  Can I reinstall from the recovery disks without wiping everything aft of the configuratiion with which it was delivered?  I guess personal files will be OK (although I don't know this for sure), but I'm afraid I'll have to reinstall other applications, my family has developed over time and perhaps lose the media protected by DRM licenses.

  Someone has encountered anything like this or have any suggestions?

  Well, I finally stumbled into the solution.  It was caused by a conflict with another application.

  A few weeks before the card failure I had installed a program called video capture Replay Video Capture that I had bought a few months ago and never used.  However, at this time where everything including the TV tuner and Media Center worked well that's why I associate the problem with this software.  The problem comes after the system is rebooted the first time after installation.  In my case, it has not been rebooted until a few weeks later as part of the recovery of the fault of the graphics card.  Suddenly, the TV tuner did not work and I get the error messages mentioned in this title of the thread.

  I was at the end of my rope with this and was just to clean your system to do a reformat and reinstallation.  I uninstalled the Replay Videa Capture program to move it to another computer, and when you restart the computer I noticed that the error message disappeared.  Of course I went to the Media Center and could set up my TV tuner card and watch television.

  Looking for some info on this conflict, I found the following. (http://forum.applian.com//showthread.php?847-Conflicts-between-RVC-and-XP-Media-Center-OS&s=c0aec9897b51d550c47b919e73e59bfc)  It is difficult to say who is at fault in the present.  I'm sure that Microsoft accuses Applian for the encoder to mpeg (mcm2ve.ax) used in Replay Video Capture, while Applian says that the problem is a Windows process (ehrec.exe) that works all the time, hogging the tuner on the system device.  According to Applian other products similar to theirs have this conflict as well due to the process of Windows.

  Fortunately, there is a solution in this case.  Applian has released a new version of Replay Video Capture (version 4.2) that uses a different mpeg encoder and eliminates the problem.  Given the surprising lack of info about it on the Microsoft Web site, I wonder how many other people with this unresolved issue dealing with the same thing as me.  If you're like me and you don't usually need to reboot your PC for a few weeks at a time, you may never know to associate the problem with the application.  What a waste countless hours trying to diagnose, and most disconcerting, that's what I was about to go through a reformat and reinstall because of this.

  Thought I'd post here my problem resolution in the hope that it might help someone else.

• Microsoft error message "R003. EXE has stopped working and was closed ".

  Anyone know what this means?   Microsoft Windows 'R003. EXE has stopped working and was closed "it doesn't affect my computers operation at all.

  Discussions were merged.

  Deleted duplicate.

  I just found this while trying to get the answer. I gave him a shot and think that it does the trick.

  http://malwaretips.com/blogs/default-tab-search-bar-removal/

• NService Application has stopped working and was closed to popup on the desktop, when I first boot my computer.

  Original title: NService Application has stopped working and was closed

  Recently, I see this popup on the desktop when I start my computer first – 'NService Application has stopped working and has been closed. "

  What is - this and why I am see?

  Thank you!

  Hi Lee,.

  1. have you made a recent software or hardware changes to the system?

  2. is your system connected to a domain?

  Nservice.exe seems to belong to IBM Lotus Notes / / Domino from IBM.

  Method 1:

  If you use applications such as Lotus, then you can try to uninstall and reinstall to fix the problem.

  Note: Make sure that you have the CD or downloaded installation files to reinstall the program.

  For more information, see the articles:

  Uninstall or change a program

  Install a program

  Method 2:

  Otherwise, you can perform a clean boot and check if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you have completed troubleshooting.

• I got the error message "Spooler subsystem app stopped working and was closed".

  I got the error message "Spooler subsystem app stopped working and was closed" when I tried to print a large PDF file.  I can not load a printer now.  What is the next step?

  Hello

  You should probably check with Support from Adobe and their communities and Forums in case
  There are known problems.

  Adobe - Support
  http://www.Adobe.com/support/

  Adobe - communities
  http://www.Adobe.com/communities/

  Adobe - Forums
  http://forums.Adobe.com/index.jspa

  ====================================

  Check with the printer manufacturer for updated drivers and support for known issues.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  The value of all Services back to their default values.

  Start - type into the search box-> Services find top - make a right click on - RUN
  AS AN ADMINISTRATOR

  BlackViper - for Vista SP1 - Services - all return to their default values.
  http://www.blackviper.com/2008/01/28/black-vipers-Windows-Vista-Service-Pack-1-service-configurations/#more-3020

  BlackViper - for Vista SP2 - Services - all return to their default values.
  http://www.blackviper.com/2009/05/31/black-vipers-Windows-Vista-Service-Pack-2-service-configurations/#more-2991

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• WinService.exe has stopped working and was closed message.

  I have Windows Vista Home first. My problem is, there is a tap of quick launch next to my Start menu, when I click it I get a message that says "WinService.exe has stopped working and was closed". I don't know exactly what it is or how to solve the problem in order to get the tab out my quick launch.

  Hello

  Did you change your computer?

  Method 1:

  I suggest you to follow the steps and check.

  Run regedit from the line start/search
  Go to these keys:

  EntVersion entVersion\Run
  EntVersion entVersion\RunServices

  Click on each in turn and then look for a string that load on the right.
  Select and simply delete this string in the right pane.

  Method 2:

  Run Selective startup using System Configuration

  http://Windows.Microsoft.com/en-us/Windows-Vista/run-selective-startup-using-system-configuration

  Method 3:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Display multiple instances of NTDVM. EXE running in Task Manager and get error ntvdm.exe has stopped working and was closed

  There is also another problem of ntdvm that I meet where the file ntdvm.exe continues to the multiple (i.e. numeorus ntdvm.exe files are running in the Task Manager) to the point where my computer slows down and ends by crashes.

  Very grateful for any solution for every problem!

  I am running vista.

  * original title - ntvdm.exe has stopped working and was closed...?  Recurring problem! *

  Hello

  1. don't you make changes to the computer before that happened?

  2. Once you get this error message?

  I suggest you to try the steps below and check if it helps.

  Method 1: Try scanner SFC [SFC system] on the computer that would be a system file corrupt on the computer search and replace.

  http://support.Microsoft.com/kb/929833

  Method 2:

   Also try to set up your computer in a clean boot state, and check if the same issue occurs.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Try to scan your hard disk from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Hope this information is useful.

• mysqld.exe stopped working and was closed

  Whenmy computer starts, I get and error message "mysqld.exe stopped working and was closed". What is the solution?

  Hi vinaypahwa,

  Looks like you have an unwanted program that loads when Windows starts.
  The solution is to disable this program of commissioning by performing a clean boot:
  http://support.Microsoft.com/kb/929135
  You can also manually check which starts up by looking at the startup of the System Configuration dialog box tab and disable what you do not want to start.
  I hope this helps.

• I bought Adobe Acrobat 4.0 and aired on a Windows XP laptop. I bought another laptop running Windows 7, but it seems that my version of Adobe Acrobat 4.0 is not compatible with Windows 7. What should I do?  Do I purc

  Some time ago I bought Adobe Acrobat 4.0 and aired on a Windows XP laptop. I recently bought another laptop running Windows 7 Professional, but it seems that my version of Adobe Acrobat 4.0 is not compatible with Windows 7. What should I do?  Should I purchase an upgrade?

  Hi johnindallas,

  Yes, you reason as acrobat 4 is not compatible with Windows 7.

  Acrobat 4 is a very old version and Adobe no longer provide support for this version.

  I suggest you buy the Acrobat DC subscription or license.

  For more details on the plans & pricing, please see:

  Plans and prices. Adobe Acrobat DC

  Concerning

  Meenakshi Negi

• I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  I have a problem I bought the collection master in 2012 for Mac just got a new computer with Windows 10 and I do not know how to download and install master collection on my new computer, can someone help me?

  Available downloadable Setup files:

  • Suites and programs: CC 2015 | CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC, XI, X | Suite X | 9,8 | 9 standard | 8 standard
  • Captivate: 8 | 7 | 6 | 5.5, 5 | 1
  • Cold Fusion: 11: 10 | 9.0.2 version 9.0.0, 9.0.1, 8.0.1, 8.0.0, 7.0, 6.1, 6.0, 5.0, 4.0
  • Contribute: CS5 | CS4, CS3 | 3,2
  • FrameMaker: 12, 11, 10, 9, 8, 7.2
  • Lightroom: 6| 5.7.1| 5 | 4 | 3
  • Photoshop Elements: 14,13,12,11,10 | 9,8,7 win | 8 mac | 7 mac
  • Premiere Elements: 14,13,12,11,10| 9, 8, 7 win | 8 mac | 7 mac

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".