The T440p is compatible with the Ultrabay Battery?

Similar Questions

• T410s - Ultrabay Battery and locking issues

  OK just - my new newegg.com ultrabay battery:

  http://www.Newegg.com/product/product.aspx?item=N82E16834994268

  is having intermittent problems. I will list out them:

  • Connect the questions of recognition.
  • Wake up sleep (as HERE)
  • Charge of issues - it is stuck at 18% now and does not load!

  To explain more. When I got the battery that I plugged it in and the system immediately recognized and began to charge. I have let it charge all the way up. I used it for say 30 minutes on battery which worked as expected. The battery of the UB exhausted up to 70% or something and put it to sleep. When I woke up the machine (the cover) the battery ejected, and whenever I have it plug back, said he is ready to be removed. To resolve this problem, I have to restart or sleep again then he semi works.

  Now it to something else - it shows as connected but still drains the MAIN battery and not the UB even if she is charged. When I remove the main battery and boot the system with just the ultrabay battery starts to beep at me (like beep beep beep beep as no stop). It is always powered of course and shows always have a battery.

  Now even when I plug (adapter 65W and 90W sector) it shows "Connected at no charge" and it's there. Power Manager indicates that the battery is in good conditon, always 0 cycles. First used 7-11 - Manufacturered 12/10.

  Last issue being the lock, I guess do it several times now, it's super hard to remove the battery, it seems as if I'm doing it wrong, but the first time when I arrived to the farm, I did to remove the DVDRW in it easily, there even 1 fingers. Now, it's like I'm breaking my fingers to get it open. The first switch, is more difficult to move too so the time switch is crazy hard to slide!

  So, anyone got any ideas? I have 3 years warranty so I can send it, but it is my only system so I'm going to be naked for awhile until she coming back to me (no guarantee on the spot on this system, I "improved" to a T410 which was spot on.).

  Thank you

  PS - Sorry for the long post, I just wanted to give some details

  FYI - apparently it was all the way down to the motherboard that needs to be replaced. Had to send in twice but the 2nd time that the Board of Directors has been replaced and now fresh stuff as it should. It also allows the hot plug and the switch is also easily removable.

  Didn't want to be one of 'those' posts where the questions are asked but no solution posted later or "NVM - it is fixed.

• I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  I have problems to make my battery charged, because the cable does not have a link solid with the socket of the phone.  The problem seems compatible with a lot of cables, so I think the problem is with the phone. Can it be fixed?

  Probably there is debris and dust in the decision-making of the lightning.  Serve with compressed gas canned (NEVER orally).  If this doesn't help, try electronic contact cleaner has a q - Tip.  Finally, take it to Apple.

• the atrix battery is compatible with the atrix 2?

  I'd like to buy one of these 3000mah battery for my atrix more 2, but where I live I can only find this battery for the atrix 4g and im not sure if it works on the atrix 2.

  The Atrix 4 G battery is not the same as the Atrix 2.

  Atrix 2 is HW4X

  Atrix 2 extended is BW8X

  The only other phone I can find with the same battery is the Droid Bionic, but the battery door does not have the Atrix 2 of course.

  Atrix 4 G is BH6X

  I hope this helps.

• 5 accessories 5 d Mk II is not compatible with the 5 d Mk III

  I have a 5 d Mk II and a beautiful collection of lenses and accessories.  I'm upgrading to a Mk III.  Can someone tell me what (if any) targets and accessories are not compatible with the Mk III?  Thank you!

  FBurr wrote:

  Thank you.  Someone once told me the grip was not compatible, and I was concerned about my L-bracket for tripod work (that I can test in the store).  I just wanted to check.  Thanks again!

  I'm sure that both cameras use different battery handles.  Remember, brackets are usually designed to hold the Canon battery grips, not 3rd party, handles that must be slightly different form of Canon.

• Just upgraded to Vista Home Premium to XP. Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.

  after update to XP media center units Vista remote control

  Just upgraded to Vista Home Premium to XP.  Got a Packard Bell with RF for the Media Center remote control, worked fine with XP, but is no longer compatible with Vista.  I checked the usb driver for the usb XF-10 rf remote receiver and it is fine, uninstalled and reinstalled it.  Handset was working fine a few days ago.  I also went in 'Administrator', 'services' and then active HID, but it still does not work.  Media works well, but it would be nice to have the operation of the remote control!  Not particularly computer, simply suggestions please!  Thank you, Nick.

  Hi Nicolas,

  I suggest you to check the battery. Additionally, make sure that you have installed the right drivers for you Consumer IR Port.

  For more information, you can check the link below,

  http://www.PackardBell.com/index.html

• With disabilities in the computer battery notification.

  My Dell Inspiron (64-bit-Win 7) is still on the adapter CA but after defragmentation, a warning popped up ""battery is temporarily disabled. " Turn off the computer and wait until cools up to the operating temperature. "After several hours off the coast and even on current alternative, the battery status light flashes white to amber.  It starts fine with the same message that appears on the toolbar of systems.  The meter now shows "0%, no recharge underway." However, Device Manager displays a problem with the battery.  My second step is to go to Dell.support.  The web site found and recommended to install a BIOS file.  However, during the installation, she abandoned because it is "impossible to download until the battery is charged 10%."  Please tell me the problem and the solution?  Are there consequences if I don't quickly act on your recommendation? Thank you in advance.  (Computer PS is 15 months old).

  I tried also with no results.  I found that I have to do the following steps.

  1. turn off the laptop and unplug the AC adapter / CC.

  2. remove the battery and re - connect the power adapter.

  3. turn on the laptop using the AC adapter.

  4. open the Device Manager.  Select "Batteries".

  5. right click on "Microsoft AC adapter" and select "Uninstall".

  6. right click on 'Microsoft ACPI compatible method battery', then select 'uninstall '.

  7. close the Device Manager"and turning the laptop off.

  8. replace in place the battery and plug in the AC adapter.

  9. turn on the laptop.  The adapters will be re - install themselves on start up.

  10. the laptop battery will begin to charge.

  Unfortunately, if there is a power failure or if you unplug the adapter sector; you will need to repeat the process.

  I hope this helps.

• Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)

  Is compatible with Mac OS 10.12 (Sierra) with Logic Pro 10.2.4 and the iMac (21.5 inch mid 2011)?  I contemplate moving to Sierra, but not if it comes into conflict with Logic Pro.  Can someone advise?

  Thank you!

  Matt

  It was reported a number of not being able to save or to new projects with the title of the Sierra.

  I would conclude some time if I were you, especially if everything is working well at the moment.

• is - a mc at the beginning of 2008 pro compatible with sierra?

  is - a mc at the beginning of 2008 pro compatible with sierra?

  After no.

  https://www.Apple.com/MacOS/how-to-upgrade/

  "Mac Pro (mid-2010 or more recent).

• How I check my Mac, applications are compatible with the Sierra?

  How can I ensure that my Mac, applications are compatible with Sierra FRONT update?

  I read that some applications may not work more on macOS Sierra abandoned because of the garbage man.  Only thing I found was to use the command terminal otool - oV Applications/PROGRAMMNAME.app/Contents/MacOS/PROGRAMMNAME | tail - 3 to verify an application but I'd have to type that in hundreds of applications - is not good.

  You can see http://roaringapps.com/apps?platform=osx.

  If you want to check your applications manually, you can run this AppleScript:

  paragraphs of the allApps value (the shell script ' find/Applications / - name \"*.app\ '-maxdepth 2 |" ") SED EI \"s/\\(.*\\)\\/\\([^\\/]*\\).app/\\2/g\" ")

  Set compatibleApps to {}

  Set incompatibleApps to {}

  Repeat with PAP in allApps

  set this to the script ' otool - oV "shell & city form of (' / Applications /" PAP ".app/Contents/MacOS/" & PAP) & "|" tail - 3"

  If this contains "OBJC_IMAGE_SUPPORTS_GC" then

  Copy at the end of incompatibleApps PAP

  on the other

  Copy at the end of compatibleApps PAP

  end if

  end repeat

  -If you want a dialog box to view the compatible/incompatible applications

  compatibleString the value «»

  incompatibleString the value «»

  Repeat with theItem in compatibleApps

  "the value compatibleString compatibleString & item &"

  "

  end repeat

  Repeat with theItem in incompatibleApps

  "the value incompatibleString incompatibleString & item &"

  "

  end repeat

  Tell me to display the dialog box "compatible apps:

  "& compatibleString

  Tell me to display the dialog box "incompatible apps:

  "& incompatibleString

• Is the iPad compatible with iOS 10 3rd generation?

  Is the iPad compatible with iOS 10 3rd generation? I want to upgrade, mainly using the new maps application. I saw some sites state that it is possible to upgrade a 3rd gen iPad. If not, is there a way to download just the Maps app.

  Thank you

  Lou

  Yes, the 3 gen iPad is compatible with iOS 10. You can update.

• My Beats Solo HD headphones is compatible with the new ipod touch 6?

  Hello, I am writing because I have a question for the new iPod Touch 6: this is my headphone Beats Solo HD is compatible with iPod Touch 6? I currently have an ipod 5th generation touch 32 GB iOS 9.3.5. However, I might have to buy the new iPod Touch when my version of iOS will be slower and therefore change my helmet. Y at - there someone who can give me the details?

  Thank you

  Maxime Bourget

  If it works with 5G it will work with the 6G

• The first generation wireless charger Apple Watch will be compatible with series 2 Watch?

  Apple Watch of first-generation wireless charger won't be compatible with the new watch series 2? I just have to make sure before I buy a new charger wireless with my new watch.

  I guess it will be. There is no differentiation in store for the accessories of the watch.

• The new Apple Watch comes compatible with my iPhone 5 s 16/09/2016?

  Hello world

  I am interesting in buying the new Apple Watch, and I don't know if the watch is compatible with my iPhone 5 s.

  I already pre-order my iPhone 7 more, but it won't do anytime soon, and I'm sure that the watch is compatible with the new more than 7. I wonder all the old iPhone 5s. My iPhone 5s does not use IOS 9, but 10 of IOS.

  Thank you

  Hello

  Yes - the new Apple Watch models are compatible with your iPhone 5s.

  As for the first generation watch, the new models require iPhone 5 or later.

• El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  El Capital is compatible with the MacBook Pro version 10.10.5? Can anyone help answer this question before I update? Thanks in advance.

  Why did you start a new post? Post again only after only 8 minutes accomplished nothing.

  There is no general problem going to EL Capitan on your Mac.

  Some applications may require updating.

  Some devices like printer may require the updated drivers. For some readers of devices not being updated are available.

  This is the Office Mac Pro forum. I asked that your post be moved to the El Capitanforum or another appropriate forum.

  Please move to the EL Capitan forum or another appropriate forum. Thank you