The tab text is yellow and blurry and unreadable on something else than the darker color tab

Tabs appeared suddenly yellow, white, or green color with a yellow blur text unreadable. Only way to read the text on the tab must change each individual tab to the darker, gray but still blurry text. I want to go back to the tabs of the way they were with black text.

Hello, please update to version 18.0 extension colorful tabs :
https://addons.Mozilla.org/firefox/addon/ColorfulTabs/versions/

Tags: Firefox

Similar Questions

  • Paint on the layer in Photoshop with lighter color makes the color paint more light go under the darker colors? How can I fix it?

    I have Photoshop CC

    When I use paint tool to paint on lighter colors on a layer, it always goes under the colors darker on the same layer. Even if I paint the darker color first and the lighter color, second, the lightest color continues to go under the darker color. And it's all happening on the same layer too! It's like photoshop is to order the colors based on what color goes on top and what colors light up and down in the order how dark the color is.

    How can I do so that the color that I finally painted goes on top?

    See the blending mode in the Toolbar Options paint is set to Normal.  There is a parameter 'Behind' who will actually do what you describe.

    Also check your layers panel blend modes and settings for each layer.  Maybe not relevant in the present case, but recommended when the strange behavior happens in the layers.

    Gene

  • in the emails, hyperlinks are suddenly yellow and unreadable

    How to restore a more dark color to hyperlinks (and for the names and addresses in the to / from the email section?)

    Hello world.  Sorry for the late report.  Before I could get my laptop to my own technology, Microsoft has uploaded a boatload of updates (no way to catalog it as what they were, but no matter) and the problem disappeared after restarting the laptop.  So somewhere in this batch of updates was the solution to this problem, suggesting perhaps that I was not the only person with this annoyance - and my tech probably could not have fixed anyway.  So all's well that ends well...

    Thanks for the support, even if I couldn't understand how to act on some of the suggestions!

  • How can I make the fonts on the darker color of Safari

    How do the fonts in Safari a darker color. They are a light gray now and hard to read.

    You can not.  Customize the format/style/color/type of fonts is not possible in Safari.  You're stuck with what Safari renders for that particular Web site.

  • Cannot change the tab page to something else than the mozilla home page

    Used to have the newtab defined for my tabs page. After you have installed a program took bing-over. I removed bing, but not the tabs are only the start page of mozilla. When I change at all: config, no matter what I put the same page keeps coming back.

    Any ideas?

    Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance).

    • Do NOT click on the reset button on the startup window Mode without failure.

    If you do not keep the changes after a reboot or have problems with preferences, see:

  • How can I set the password for iPad 2 Air to something else than "immediately"?

    I have three iPad, iPad 2, iPad 2 Air and tha iPad Pro.

    My iPad 2 Air gives me the option to "set the password immediately".

    the other two iPads give options, for example, 15 minutes, 1 hour, etc.

    All three iPads running the latest IOS.

    is this a glitch with my iPad 2 Air or are they all like that?

    Why the 'immediately' is the only option? It looks like the other options are missing.

    Thank you.

    Try the help in this support article > using a password with your iPhone, iPad or iPod touch - Apple Support

  • Set - up my account like adminisreator & ne can enter something else than the user stuff

    All the file/folder locks that don't mean anything. don't close.  Impossible to get in a bunch of stuff that is pretty basic.  I have re-set this thing many times & never had this problem.  It is even used to leave me in places that I wanted to, I had never been.  Can still open the file of windows startup now. Help, please!

    Thank you; Frodo (Jamie)

    Impossible to get in a bunch of stuff that is pretty basic.  I have re-set this thing many times

    Can you elaborate a little bit on this "pretty basic stuff"?

    What don't have reset and how?
  • Unable to change the solid color background

    original title: my wallpaper is unable to change the solid color, no matter what I select. I have 3 users defined on my Windows 7 Ultimate, and this happens for only one to three logons.

    my desktop background cannot be changed to solid color, no matter what I select. I have 3 users defined on my Windows 7 Ultimate, and this happens for only one to three logons.

    I usually use the 'personalization' feature to select the themes, but he 1) is not seen when I select a theme and 2) wallpaper is a solid color when I save the theme. All the other personalization... that is, the window color, sound and screen saver work as advertised. It's just the wallpaper which won't be not 'take'
    Same thing happens when I try to change the background to something other than a solid color (I can choose any solid color I want). He can't do the "slide show", can only select a single peak, cannot set the background with the help of a right-click on a photo. Can't even get the default value of Windows 7 or Windows 7 Basic background to display.
    I even went as check the settings of "accessibility". No joy...
    Any ideas?

    Hello

    Thanks for posting your query in Microsoft Community!

    According to the description, you are facing problems with background screen change. In order to quickly provide a solution, please answer this question:

    Did you do changes on the computer before the show?

    Follow the suggestions below for a possible solution:

    Method 1: You can follow the steps in the article and check if it works.

    Impossible to change the background image in Windows 7

    http://support.Microsoft.com/kb/2504610

    Method 2: If this does not work, create a new user account and check. If it works in a new user account, then probably your user account have been damaged and would need a fix.

    Create a user profile.

    http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

    Now search for the question.

    Follow the below link to fix the user profile damaged.

    http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

     

    If you need further assistance, please answer and we will be happy to help you.

  • What is the best way in grayscale, an image that has a lot of dark colors?

    I try to calm black and darker colors so that they are all shades of gray for a book coloring grayscale. Some pictures when I use various means of grayscaling, the darker colors are still too dark. Especially in the lower left Tulip. If I try the dodge tool, looks almost a blur. I tried the 'levels' but maybe I do not just? Original and my version of shades of gray... can someone tell me how they would do?

    Tulipa.jpg

    Tulipa (2)_geek.jpg

    It's a matter of taste, but you could do a separate B & W adjustment layer to manage the lower left Tulip, but it is close enough to black and gray. The small amount of magenta in there can be lit and then hidden from the rest of the image.

    The maybe a B & W beneral adjustment layer.

    Finally, a layer of curves to adjust black and gray.

  • Dark on the screen colors become red lines - Satellite P200D - 11L

    I have this problem since yesterday: sometimes the dark colors on my screen becomes red lines.
    It is not a problem with the display LCD, in my opinion. It happened on the home screen when I turn on my laptop.

    So it is not with the OS or drivers.
    The problem would be with the graphics card?
    Will I need to communicate with the specialists of toshiba? I hope that's not very serious.

    If possible try to test with the external monitor. When the same appears on the external monitor, faulty graphics card is responsible for this. In this case, you need professional help.
    The warranty is still valid?

  • I lost the small arrow returns you to the previous page online.  It should be under the red, yellow and green buttons.

    I lost the small "arrow" normally under the red, yellow and green buttons at the top left of the pages online.  Obviously, it's very frustrating because for this it is necessary to close and restart or just remember to right click and request a new window or a new tab.

    I'm working on an iMac of office.  Bought 2010.

    Thanks for any advice.

    Assuming that you are referring to Safari. Control by clicking in the title bar, choose "Customize toolbar...". ", drag the rear icons in the title bar.

  • How do fill you in marked with red, green or yellow, and counting also the boxes ticked in the column?

    I am working on a form with three columns, one column is "Yes" = green, a column is 'No' = red and the other "current" yellow =.

    The goal is to have control of the "NO" box when chosen turns red background. The other goal is also count all the boxes 'NO' in the column.

    Currently, all the checkbox values '1' so I can count.

    Ok. In this case, you can use something like this as action MouseUp-check boxes:

    if (event.target.value=="1") event.target.fillColor = color.green;
    else if (event.target.value=="2") event.target.fillColor = color.red;
    else if (event.target.value=="3") event.target.fillColor = color.yellow;
    else event.target.fillColor = color.white;
    

    To count all the answers not use this code as the calculation script custom of the text field where you want to display this number:

    var total = 0;
    for (var i=1; i<=9; i++) {
        if (this.getField("standard_"+i).valueAsString=="2") total++;
    }
    event.value = total;
    
  • How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar?

    How to stop multiple self-switching to the address bar every time I open a new tab and try typing something anywhere outside the address bar? As something just wants me to use this integrated search when you type something non-Web-address in the address bar and press to enter. And the most ridiculous thing is that happens repeatedly on as every second, as I just got off the address bar and start typing again, but still he passes me in the address bar, then 3, 4 times like that. And the result is that I don't see the address of this page.

    I think that its has something to do with my AVG Antivirus, because it started the same time a Nation AVG started to appear in each new tab I opened (and which is irritating as me, I've read here on support.mozilla.org and it seems that the only solution is to completely reinstall Firefox, but I don't want to lose all my settings) but when I type something in the address bar and press enter It opens the search results in Google.

    Please try to help me, I love Firefox but I have to switch to Chrome until I fix this.

    Thanks in advance

    First of all, please update Firefox 32. 22 is no longer support is not safe. So, let us know if you still have this problem. Update Firefox to the latest version

  • I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

    I have updated to ios 9.3.1 now I have no sound for text messages alerts and alert sounds no calendar! I just missed a meeting disaster. Any ideas how to solve this problem, all the settings are correct.

    Try a reset...

    Force restart your iPhone: tap on and hold the Home and Sleep/Wake buttons for at least ten seconds, until you see the Apple logo.

    If this does not help, tap settings > general > reset > reset all settings

  • After loading the page colors are suitable, then suddenly, it turns clear blue and the text turns grey

    When I open google, the immediate page just comes with a white background and black text. Until the page ends well, the background turns light blue and grey Tower of text. Show logos right framed in white background, but the rest of the page is light blue. It happens in other websites as well. It backgrounds are good, but where the text is as in the forums, the text is grey, and here the background colors have faded too.

    Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > themes).

    • Makes no changes on the start safe mode window.

    See:

Maybe you are looking for

  • I had to fix Firfox because it wouldn't turn on. Now I have an icon on the desktop that says the old data. must I remove/recycle it's bin or keep?

    Firfox moz reset. worked very well. Should the icon on my office now says of the old data, I delete and send to trash and then empty the trash. It's going to hurt me.

  • Portege M700 Touch problems

    I recently bought a Portege M700-110 and try to use my finger instead of the pointing device. However the calibration of the finger presses a wrong, because when you press the center of the screen is not a problem. But when pushed somewhere to the le

  • How do you "break" a track playback

    I want to be able to make a break all the tracks at once in the middle of a song so I can do a James Brown type thing where the entire band "hits" at some point, in the heat of the Groove, etc.. All I can find is the Play/Stop buttons in mapping of p

  • 'CUSTOMER SERVICE '?   not so much...

    I would use my LR program without having to deal with the lightroom mobile notifications every time I open it.  I use not mobile.  I'm not interested in mobile.  I took the trouble to find how to turn it off, but he still retains his return.It's real

  • database creation script

    Helloon 11.2.0.03 on Win 2008 ServerI want to create (just by script), on another server, a database of exactly similar to my db (ORCL). Then I want to generate this script. I used DBCA. But it generates files.File is attached.I do not understand why