The tables are all blacks in Dreamweaver CM³ and text is invisible

Similar Questions

• all rows in the table are not eligible for the specified partition

  SQL > Alter Table ABC
  Exchange 2 Partition P1 with Table XYZ;
  
  Modified table.
  
  SQL > Alter Table ABC
  Exchange 2 Partition P2 with Table XYZ;
  
  
  P2 Partition Exchange with XYZ Table
  *
  ERROR on line 2:
  ORA-14099: all rows in the table are not eligible for the specified partition
  
  The exchange partition works fine for the first time. However, if we try to swap the 2nd partition it gives the error.
  How to solve this error?
  How can I find the lines which are not qualified for a specific part. is there a query to find out the same thing?

  >
  Well, exchange of syntax and logic is not clearly as it should (IMHO). There is no element of syntax that tells Oracle we want to Exchange partition data in a table that is not partitioned or not partitioned into partition table data.
  >
  What? Not sure where you got that but maybe it was before you had first cup of coffee? ;)

  An "Exchange", it's just that; an Exchange. Partition data end up in the non-partitioned table and vice versa. It is meaningless and totally obsolete if "we want Exchange partition data in a table that is not partitioned or not partitioned into partition table data".
  >
  It was decided by Oracle not partitioned table control. If the non-partitioned table is empty, it means you want to Exchange data partition in a non-partitioned table. And if not partitioned table is not empty, it means you want to Exchange data in the table that is not partitioned into partition.
  >
  There is no decision to make. The segments are swapped. Oracle doesn't check, know or even care if one or the other or both segments are empty. 'Control' which is carried out (by default except if NO CONTROL is used) only consists of ensuring all the data in the segment intended for the partition belongs to this partition.

  It is what gives the example of John. This can NEVER work if table1 is empty unless p1 is empty at the beginning:
  1 Exchange p1 with table1
  2 Exchange p2 with table1

  As John explains, assuming that no other operations are trying to put the data from p1 P2 which is not possible if p1 actually contains data.

  You can save it for next April 1!

• I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?

  I have 6 buttons on the navigation bar that point to 6 different pages - the buttons are all the same color - if I am currently on [say] page 3-How can I me key menu 3 to change color and state that I am on page 3?   using DreamWeaver CC

  Among the contributors here has a nice page explaining how to do what you want, using css.

  Indicator of persisting in the Menus - Page http://alt-web.com/

• How to find if the data in the table are distributed on multiple disks

  Hi all
  
  I have a question on parallel processing.
  
  Assume that the Oracle (11 g 2) database is installed on a 12 CPU hardware has 24 independent labels, then I guess it's that we can have a maximum of 12 DOP.
  
  But if the table on which I use the parallel market that spans only 4 discs then the above 4 parallelism will degrade the performance of the query.
  
  My question is how do I know if the data in the table are spread over the number of disk drives, so that we can properly apply valid parallel operations on the table.
  
  Appreciate your valuable contributions here.
  
  Thank you
  MK.

  Just think logically.
  What is a table in the database? A segment.
  What is a segment made up of? Scopes.
  What is recorded on a scale? The id_fichier of the data file.

  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Adding new partition in the table are

  Hello
  
  Oracle 9i
  Windows 2003 operating system
  
  The main entry/exit table is one of the base tables that has a large number of records and a very high success rate, and to avoid poor performance that may occur in such cases, Oracle Table partitioning technique has been examined in the early stages of the implementation of the system.
  
  Unfortunately, the technique used to divide data based on the year of the transaction considered the year 2010 as the last specific partition, so all records created after this year is gathered in a single partition and this may cause poor performance in the years to come.
  
  Are required to add another 10 partitions; up to the year 2020 taking into account that the downtime should be close to zero.
  
  Ground:
  
  According to my knowledge
  
  for this, so we can create a new table with the same columns and add required 10 more partitions, and if we take 2 scenarios like
  
  export/imp
  insertion in the new table select * from < table > old
  
  What is the best, and if we take exp/imp, if her take a few hours of time to complete a task... what will happen for the updates as insert, update, and delete in this time what will be the impact on the import... I mean if all committed tarnscations... These tarnscations automatically add to the table are not.
  
  Please tell me what is the best and the tarnscations should not effect... pls tell me how excatly we can complete the task.
  
  Concerning
  873393

  In my script, I have a DROP TABLE because I'll put up a reproducible demonstration. I can run the script repeatedly and regenerate the same demo data!
  In your environment you would not fall off the table!
  To simplify the demo for you: IGNORE the DROP TABLE command. Pretend it does not exist.

  Hemant K Collette

• When you use tool crop the screen goes all black.

  When I select the crop tool and drag it over the picture to select the area of culture, the screen goes all black, so that I can't see the selected area or change its size.

  Boxes (size and resolution) of the tool are clear.

  Can someone help me?

  I try to reset all tools, but has not changed anything, I restarted the program, I restarted the computer and still occurs.

  Any help would be greatly appreciated.

  The advice that seems to work more often with this kind of failure is to update your video drivers on the website of the manufacturer of your video card.

  Here are links to the pages of updated driver for two big video card manufacturers:

  ATI: http://www.amd.com/us/Pages/AMDHomePage.aspx

  nVidia: http://www.nvidia.com/Download/index.aspx?lang=en-us

  -Christmas

• the icons are all white at the start

  the icons are all white at the start of my PC. gradually in time 30 seconds they are all back to normal. can someone tell me what the problem is and can be fixed.

  Please and thank you

  E-mail address is removed from the privacy *.

  Hello

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you are facing problems on Startup icons. Please correct me if I misunderstood.

  I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  1. have there been recent changes to the computer before the show?

  I suggest to try the given steps and check if it helps.

  Method 1: Try to run fix it from the link below:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Method 2: If the problem persists, then try to set up your computer in a clean boot state, and check to see if the same problem happens.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

   

  Note: After the boot minimum troubleshooting step, follow step 3 in the link provided to return the computer to a Normal startup mode.

  Method 3:

  Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please follow these recommended steps and post if you still experience the problem.

• 3 related issues: slow movement; the photos are all from the first image; and no sound from the soundtrack to the DVD downloaded.

  I put a DVD in my computer. It plays fine in Windows Media Player. When I transfer to Windows Movie Maker Live, three things happen: 1) the thumbnails are all the same - the first image. (2) the movement is slow. I tried it accelerates, but it is simply not the movement in real time - either too slow or too fast. (3) the soundtrack plays for a fraction of a second.

  What is the problem and how to fix it?

  I converted DVD to WMV format. This fixes the movement of the image and I can hear the music (not quite synchronized), however the thumbnails are still just the first image. In addition, every single feature that I blow (editing, effects, forwards, etc.) the picture freezes and yet the soundtrack plays again.

  ===================================
  It is normal that video to be the first image thumbs.

  Since it was a DVD... I guess it's a big project
  and the gel could be due to a lack of system resources.
  If you wait it can dissipate.

  Some video converters are better than others... Freemake
  maybe worth a try.

  It is also possible that your video driver may need an update.

  Verify that the video driver is problematic is to
  reduce the graphics hardware acceleration:

  Windows 7 - reduce graphics acceleration
  (see following article)

  More low hardware acceleration
  http://help.AOL.com/help/microsites/microsite.do?cmd=displayKC&docType=kc&externalId=15391
  (Windows 7 / Vista / XP / 98 / ME / 2000)

  Good luck...

• I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  Mr President.

  I create a form based on two tables that have sequences also. When I create insert only row is inserted in the fields in table first and second fields of the table are empty. Why?

  

  the page source is

  <?xml version='1.0' encoding='UTF-8'?>
  <ui:composition xmlns:ui="http://java.sun.com/jsf/facelets" xmlns:af="http://xmlns.oracle.com/adf/faces/rich"
                  xmlns:f="http://java.sun.com/jsf/core">
    <af:panelFormLayout id="pfl1">
      <af:group id="Group">
        <af:inputText value="#{bindings.VoucherId.inputValue}" label="#{bindings.VoucherId.hints.label}"
                      required="#{bindings.VoucherId.hints.mandatory}" columns="#{bindings.VoucherId.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId.hints.precision}"
                      shortDesc="#{bindings.VoucherId.hints.tooltip}" id="it1">
          <f:validator binding="#{bindings.VoucherId.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId.format}"/>
        </af:inputText>
        <af:inputDate value="#{bindings.VoucherDate.inputValue}" label="#{bindings.VoucherDate.hints.label}"
                      required="#{bindings.VoucherDate.hints.mandatory}"
                      columns="#{bindings.VoucherDate.hints.displayWidth}"
                      shortDesc="#{bindings.VoucherDate.hints.tooltip}" id="id1">
          <f:validator binding="#{bindings.VoucherDate.validator}"/>
          <af:convertDateTime pattern="#{bindings.VoucherDate.format}"/>
        </af:inputDate>
        <af:inputText value="#{bindings.Credit.inputValue}" label="#{bindings.Credit.hints.label}"
                      required="#{bindings.Credit.hints.mandatory}" columns="#{bindings.Credit.hints.displayWidth}"
                      maximumLength="#{bindings.Credit.hints.precision}" shortDesc="#{bindings.Credit.hints.tooltip}"
                      id="it2">
          <f:validator binding="#{bindings.Credit.validator}"/>
        </af:inputText>
      </af:group>
      <af:group id="g1">
        <af:inputText value="#{bindings.Lineitem.inputValue}" label="#{bindings.Lineitem.hints.label}"
                      required="#{bindings.Lineitem.hints.mandatory}" columns="#{bindings.Lineitem.hints.displayWidth}"
                      maximumLength="#{bindings.Lineitem.hints.precision}" shortDesc="#{bindings.Lineitem.hints.tooltip}"
                      id="it3">
          <f:validator binding="#{bindings.Lineitem.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Lineitem.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.VoucherId1.inputValue}" label="#{bindings.VoucherId1.hints.label}"
                      required="#{bindings.VoucherId1.hints.mandatory}"
                      columns="#{bindings.VoucherId1.hints.displayWidth}"
                      maximumLength="#{bindings.VoucherId1.hints.precision}"
                      shortDesc="#{bindings.VoucherId1.hints.tooltip}" id="it4">
          <f:validator binding="#{bindings.VoucherId1.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.VoucherId1.format}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Debit.inputValue}" label="#{bindings.Debit.hints.label}"
                      required="#{bindings.Debit.hints.mandatory}" columns="#{bindings.Debit.hints.displayWidth}"
                      maximumLength="#{bindings.Debit.hints.precision}" shortDesc="#{bindings.Debit.hints.tooltip}"
                      id="it5">
          <f:validator binding="#{bindings.Debit.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Credit1.inputValue}" label="#{bindings.Credit1.hints.label}"
                      required="#{bindings.Credit1.hints.mandatory}" columns="#{bindings.Credit1.hints.displayWidth}"
                      maximumLength="#{bindings.Credit1.hints.precision}" shortDesc="#{bindings.Credit1.hints.tooltip}"
                      id="it6">
          <f:validator binding="#{bindings.Credit1.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Particulars.inputValue}" label="#{bindings.Particulars.hints.label}"
                      required="#{bindings.Particulars.hints.mandatory}"
                      columns="#{bindings.Particulars.hints.displayWidth}"
                      maximumLength="#{bindings.Particulars.hints.precision}"
                      shortDesc="#{bindings.Particulars.hints.tooltip}" id="it7">
          <f:validator binding="#{bindings.Particulars.validator}"/>
        </af:inputText>
        <af:inputText value="#{bindings.Amount.inputValue}" label="#{bindings.Amount.hints.label}"
                      required="#{bindings.Amount.hints.mandatory}" columns="#{bindings.Amount.hints.displayWidth}"
                      maximumLength="#{bindings.Amount.hints.precision}" shortDesc="#{bindings.Amount.hints.tooltip}"
                      id="it8">
          <f:validator binding="#{bindings.Amount.validator}"/>
          <af:convertNumber groupingUsed="false" pattern="#{bindings.Amount.format}"/>
        </af:inputText>
      </af:group>
      <f:facet name="footer">
        <af:button text="Submit" id="b1"/>
        <af:button actionListener="#{bindings.CreateInsert.execute}" text="CreateInsert"
                   disabled="#{!bindings.CreateInsert.enabled}" id="b2"/>     
        <af:button actionListener="#{bindings.Commit.execute}" text="Commit" disabled="#{!bindings.Commit.enabled}"
                   id="b3"/>
        <af:button actionListener="#{bindings.Rollback.execute}" text="Rollback" disabled="#{!bindings.Rollback.enabled}"
                   immediate="true" id="b4">
          <af:resetActionListener/>
        </af:button>
      </f:facet>
    </af:panelFormLayout>
  </ui:composition>
  
  
  
  

  Concerning

  Go to your VO Wizard, select the tab of the entity and to check if both the EO is editable or not.

  See you soon

  AJ

• Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new downlo

  Overview of the LR5 does not. Just updated iMac 2010 with ssd, 32 GB of ram and El captain and all imports new previews are gray. The images are there, can work on them and then they appear in the preview. All records older still work fine just new download does not work. Help, please!

  Please try and delete preview Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted

  Default location should folder of the image.

  Kind regards

  ~ Mohit

• I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  I'm trying to export multi-channel audio as apple pro res 422 HQ, but the tracks are all coming full joint rather than separately. I've implemented the multi Channel sequence already. What I am doing wrong?

  All 4 titles are coming as complete blends not divisions. I guess that's a problem with the entrenchment of the channels, but can't see how to fix. Andy

  Is what would you say to my quick thought without following through all the processes after the fact, the sequence settings? My thought is that the sequence settings must be multichannel as you show, but each Adaptive track, so this channel map is routed at your leisure. If this is not the case, already, it would create a new sequence with these settings.

  I try to upload the photo

  

• When I import my photos into lightroom, the images are completely black, so I can only see the image in the browser. How can I solve this?

  When I import my photos into lightroom, the images are completely black, so I can only see the image in the browser. How can I solve this?

  Go to Lightroom preferences

  Click the performance tab

  Deselect the graphics processor

  Restart Lightroom

  Kind regards

  ~ Mohit

• I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.  I want to make a collection of web.  I clicked on the tap WEB and then clicked on the button "Import" in the lower left.  All

  I imported the images in my lightroom library catalog.  All the images are numbered 001, 002, 003, etc. and downloaded in order.

  I want to make a collection of web.  I clicked on the WEB site tab and then click on the button "Import" in the lower left.  All the images changed position.  Anyone know what I did wrong?

  Hi Peter,.

  If some how changed the order sorted, you can go back sorting to 'Added A order' in the toolbar.

  or, choose all the photos and click the view menu and sort to choose the sort order.

  Also, here is the tutorial link to learn more about creating web gallery in Lightroom:

  https://helpx.Adobe.com/Lightroom/help/creating-web-galleries-basic-workflow.html

  Kind regards

  Claes

• Control Panel, desktop and Windows Explorer are all absent in safe mode and windows XP Professional full

  After having had a nasty during the Christmas holiday, my work windows XP computer virus never seemed the same.  I ran Malwarebytes, Registry Mechanic, and PC Tools antivirus to clean the computer.  However, now my computer will not display control panel, Windows Explorer or the desktop icons.  The Task Manager does not work.

  Can someone help me?

  On Wednesday, January 12, 2011 02:10:59 + 0000, D0xa wrote:

  After having had a nasty during the Christmas holiday, my work windows XP computer virus never seemed the same.  I ran Malwarebytes, Registry Mechanic, and PC Tools antivirus to clean the computer.  However, now my computer will not display control panel, Windows Explorer or the desktop icons.  The Task Manager does not work.

  Exactly what virus was this?

  Almost certainly you don't has completely failed to clean the
  computer upward. Keep in mind the following three things:

  1. MalwareBytes anti-malware is an anti-spyware program and
  nothing to clean up viruses.

  2 PC Tools antivirus is a bad choice of an anti-virus program. For
  an antivirus program, I recommend eSet NOD32, if you're ready
  to pay for it. If you want a free anti-virus, I recommend one (are not
  run several) of the following three:
   
  Avira AntiVir
  Avast
  Microsoft Security Essentials

  3. in the course of the run Registry Mechanic has been a very bad thing to do and it can be
  responsible for the problems that you are experiencing now. Cleaning the registry
  the programs are all snake oil. The registry cleaning is not necessary
  and is dangerous. Let alone register and do not use any registry
  cleaner. Despite what many people think and what providers of registry
  cleaning software try to convince you to have unused registry
  entries is not really make you hurt.
  The risk of a serious problem caused by a registry cleaner by mistake
  delete an entry you need is much greater than any potential benefit
  It can have.
  Read http://www.edbott.com/weblog/archives/000643.html

  and http://aumha.net/viewtopic.php?t=28099

  and also
  http://blogs.technet.com/markrussinovich/Archive/2005/10/02/registry-junk-a-Windows-fact-of-life.aspx

  Let me stress that neither me nor anyone else who warns the
  use of registry cleaners never said that they always cause
  problems. If they have always caused problems, they would disappear from
  the market almost immediately. Many people have used a registry
  cleaner and never had a problem with it.

  The problem with a registry cleaner is that it carries with it
  the risk of a significant problem. And since there is no
  benefits of using a registry cleaner, running that risk is a very bad
  good deal.

  Ken Blake (MS-MVP)

• Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash

  I have a Brother HL2140 printer. When I turn it on and press the go button, all 3 LEDs light up and then begin to Flash. I need help...

  The brother of contact support.