The target of the My Documents folder redirection

Dear users,
I did as I found for redirecting my documents to a different location on my 'C' drive and something strange happened (Windows 7 Home Premium)
Went to Users\YourLoginName\Documents, properties, location, travel tab and chose him a folder target "Esteban" that I had created before.
Now the weird stuff, the folder 'Esteban' was replaced by 'my documents' in the new location and is not visible.
Basically, what makes Windows 7 is not only point to the new folder but replace it.
This behavior, that I didn't see in WIN XP in which the record would remain even if my documents has done for her.
I tried to go back and redo everything. I restored the default location of the folder my documents and now I noticed that the new folder which has been
created before 'C' is always there and now she can not be cleared to return to zero.
I'd appreciate your feedback.

Hi ameneses

Method 1: expand the library folder and click Properties in the "My Documents" folder

from here you can see the location tab and change its location.

Method 2: click here

Start-> type C:\Users\*Your username *-> right click on my documents and

Go to the properties-> click on the location tab and make the necessary changes.

If this fails also try manually using regedit in the following locations:

HKEY_CURRENT_USER folders

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders322756

Important This method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

How to back up and restore the registry in Windows:http://support.microsoft.com/kb/322756

Additional information:http://windows.microsoft.com/en-US/windows7/Redirect-a-folder-to-a-new-location

Hope this helps you.

Kind regards.

Support Microsoft-Bilodeau

Tags: Windows

Similar Questions

  • Documents folder redirected to the flash player and not able to change

    Hello

    I am running Vista and for some odd reason the documents folder is redirected to the USB flash drive. I changed the location of the default documents folder target. No luck.

    The strange thing is that I am not able to remove the flash drive as he continues to tell me it is in use and I am not able to open documents if the flash player is not inserted.

    How can I fix?

    Thank you very much.

    No, did not work.

    Don't worry, will reinstall the machine. No such thing as a good clean start :)

  • Kill the "My Documents" folder in Windows Explorer for XP

    Whenever I have called Windows Explorer in my copy of XP and then click on 'Files', the 'My Documents' folder is displayed.
    Except that I do not use it and don't want it.
    I tried in vain to get rid of him, but when I right click on it and press DELETE, it tells me that the content will not be deleted, only the icon, which would be nice.  But it's that - the icon remains.

    You can't delete My Documents. This is a directory on the system. If you want Explorer to open up My Documents, you can change the shortcut to Explorer as follows:

    Go to programs > Accessories - right click on the Windows Explorer icon, select properties and type or copy / paste the following text in the target box:

    % systemroot%\EXPLORER. EXE/e, c:

    This will open the Explorer to C:\. You can also create a desktop for Windows Explorer with the same command icon. MS - MVP - Elephant Boy computers - don't panic!

  • Re-directed WinZip unable to view the contents of the My Documents folder

    Hello

    We have ThinApped WinZip 14.0 Pro version. However when we try to use WinZip to compress files in my documents, he sees nothing in the My Documents folder, but there are files and folders in My Documents. We tried to use ThinApp 4.7 to ThinApp WinZip, however we still have the same question. Can someone contact me please on how we can solve this problem.

    I enclose the file pacakage.ini for your reference and a screenshot of which Document My empty using WinZip. In addition, we have redirected My Documents folder on a network share. Even the favorite folder did the same thing. The isolation on the personal record mode does not work. The same thing with all of our applications.

    However if we do not re - direct folders My Documents, then the virtual Winzip can see the content of My Documents. We would be very grateful if someone can get back to us as soon as possible to solve the problem. We tried the same thing with ThinApp 4.6.0 and 4.6.1, it works very well. The issue remains with ThinApp 4.6.2 and 4.7.

    I would like to know if anyone has need of more information.

    Thank you
    Anand

    This problem is solved with the latest version of 4.7.1. Please download and check.

  • A .plist file appeared in the My Documents folder

    A few days now, a file named "purchaserecordexpirenotifications - qlm.plist" appeared in the My Documents folder.

    If I delete i, it reappers the next day.

    I can't understand why, or that either the app created that.

    Any thoughts?

    Angelo

    It is probably created by the so-called "Quick License Manager" (developer name "Soraco"), installed by a third-party app, but I can't tell you that one.

  • Win XP: Remove the 'System' of the 'My Documents' folder attribute

    Win XP: The 'My Documents' folder contains an attribute of the system. Now, I can't save file there. How can I remove the attribute "system"?

    If you look at the security for 'My Documents' tab, you will see that the system has access to the file, but it should not have attribute on the file system.

    Access special permissions and see who is the owner of the folder. It should be yourself. If this isn't the case, you may need to take ownership of the folder to get access.

    I hope this helps.

    Marilyn

  • All files in the My Documents folder disappeared?

    I didn't remove them, and they are not in my trash. I tried to go to the control panel and display hidden files, but they aren't there yet. Help, please! Oh and my pictures and everything are still there... it's just the stuff in the My Documents folder.

    Hi coriedanielle,

    You may be using McAfee?  If so, the following may apply:

    http://service.McAfee.com/faqdocument.aspx?ID=TS101228

    I hope this helps!

  • When I download compressed files, they go to the local > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to the local > temp location and delete the zip file?

    When I download compressed files, they go to the local level > temp location, when I extracted all the files, they are sent to the My Documents folder. Can I go to local > temp location and delete the zip file? Knowing that I still have the data in the My Documents folder.

    Once they are checked, of course. If you want to keep a backup, you can move the zip file in your documents folder.

    In fact, you can delete everything in the temporary folder that is not currently in use. Best time to do this removal is immediately after the start, before launching other applications.

  • move the My Documents folder to another drive

    Hello! I just upgraded to Win XP Pro for Win 7 x 64. no problems! I would like to move the My Documents folder, my drive C on my drive D. I was able to do under XP, but do not know the procedure for win 7? No information or advice will be greatly appreciated. Thank you.

    The My Documents folder is part of Windows 7 new document library. A library combines several folders that contain similar file types.

    To move your documents to the D drive:

    1. create a new folder of documents on the D drive.
    2. right click on the new folder and click include in library > Documents .
    3. click on Start > Documents .
    4. double-click My Documents to display its content.
    5 drag and drop the files to the new folder.
    6. press F5 to refresh the view.
    7. in the document library , click locations .
    8. right click on the new folder, and then click set as default save location .
    9. [optional] click My Documents , and then click Remove .
    Boulder computer Maven
    Most Microsoft Valuable Professional

  • Dropbox and Windows 7 - the 'My Documents' folder location

    Is there a risk of changing the location of the "My Documents" folder either in Dropbox, so that all files are synchronized automatically?  This would avoid having to always drag files and remember what has been dragged and implemented to date.

    Dropbox seems to be a good tool to keep all the files synchronized on multiple platforms and devices, and it's a suggestion in an article.  It have a negative impact in Windows or damage the organizational structure of the file?

    As long as you use the button "Move" of Windows 7 in the properties of My Documents, that you will do whatever it is that Windows is not set up to do.  The "Move" button is discussed in the following article in Lifehacker, but 'RichR' post in forum Dropbox gives a description of the overall process with some advice on places where to set up your Dropbox folder before moving my Documents inside.  There are a number of other ways to accomplish the same thing but the do this as described above seems to be the simplest and also one that makes what Windows was already intended to do via the function "move".

    http://Lifehacker.com/5527055/the-cleverest-ways-to-use-dropbox-that-youre-not-using

    http://forums.dropbox.com/topic.php?id=55046

  • Windows 7: I would like to print a list of files and corresponding subfolders in the My Documents folder. Is this possible?

    It's time to clean up and reorganize the My Documents folder. I think I can have subfolders duplicate in my main files listed in the Documents. I would like to print a list to find and delete these folders.

    Any suggestion is appreciated!

    Thank you

    Dan

    It is a forum for Windows 7 with tips on Windows 7.

    Windows XP is different, these instructions will not apply.

    You can open a command prompt in Windows XP, then use the CD controls to get the folder you want.

    If you have installed the Windows XP command window open herePowerToy* then this can happen more quickly - to aid that allows to simply right-click on any folder & open a command already defined for this folder.

    * There was also formerly a very convenient Explore of PowerToy here but that is no longer available from MS - you will find perhaps at cnet or another download site.

    There is also a Windows XP forum.

  • How can I move the "Virtual Machines" folder to the My Documents folder?

    VMwareFusion is to put the "Virtual Machines" folder in the Documents folder in the home folder (/users/ [username] / Documents), how can I move elsewhere (as/Library/Application Support)? The user Documents folder is not the right place for automated it system files, it is intended for personal documents.


    I am running VMware Fusion on OS X Yosemite (and the virtual machine is Windows 7).

    You can keep your virtual machines anywhere you want. Here are the steps to move:

    1 exit VMware Fusion. You can stop first of all of your running virtual machines.

    2. drag your virtual computers folder or the individual VM "files" where you / them. Filenames usually end in ".vmwarevm". There is no need to call the new folder "Virtual Machines" - you can call it anything you like.

    3. Launch VMware Fusion. If the library of the Virtual Machine window is not open, open it (Windows menu-> Virtual Machine library).

    4. ensure that all of your icons for the virtual machine are light gray and say "file not found".

    5. right click on each virtual machine in turn, and select Remove. When you are done, leave the window of Machine virtual library empty open.

    6. in the Finder, drag the icons of file virtual machine in their new location and drop them in library of virtual machines VMware Fusion window. Drop them one by one in the original order, you got, or rearrange icons later.

    7. run your virtual machines as before.

    When you create new virtual computers, navigate to the desired file before the Save.

    IMPORTANT NOTE: If you your folder of Machines ~/Documents/Virtual excluded from backups Time Machine, don't forget to change the exclusion to the new folder.

    Time Machine backups are not reliable for virtual machines. You must have another strategy. (I shut the virtual machine down, compress the 'file', and then move the compressed file to a folder that is included in the Time Machine backups. This isn't the only strategy, but it works for me.)

  • How can I specify the "My Documents" folder under the directory sync for "Creative Cloud Files?

    I know how to move the 'Creative Cloud Files' directory in preferences, but when I do that, it simply moves the 'Creative Cloud Files' directory in the 'My Documents' folder. I don't think that you can set a specific folder in a folder 'sync' in the preferences. Create a symbolic link to the contents of "My Documents" in the 'Creative Cloud Files' directory would work to activate the content of 'My Documents' to sync with the cloud? Breast of Windows 8 BTW, that's...

    CrisJM, no, that won't work. You must move the files in that particular folder of creative cloud itself. The only customizable option is that you can change the location of the CC folder (the one you already indicated above).

  • Lost the initial setup of the user and cannot find the files in the my documents folder

    Thread: Recover original original put in place on window XP
    Recenty my Dektop HP (Window XP) restarted with recovery application. In the end, I lost my original CD all the user settings and can not find all my files in my documents folder. Doesn't have, I lost everything or is there a chance to go back to my original game. If ysé how can I do. He is workin OK but have Setup every thing with 4 users.

    Hello

    I fear that the computer was set to the resumption of the plant, all data and settings will be lost.
    I suggest you contact the manufacturer for the recovery of lost files.

  • How are we going to stop 'Computer' or 'Libraries' or the 'My documents' folder opens at startup in Windows 7

    Hello everyone and Microsoft workers.

    I'm having a problem where the "computer" folder opens on itself at the start of Windows 7. I did the research for days and no luck. It seems that most of the workers from microsoft does not include our question and problem.

    When booting Windows 7 "Workstation" or "libraries" or "My Documents" folder opens at startup. " How do fix us this? Anyone have the solution?

    Well good for me first 'libraries', so now it's the "computer" folder Every time when my starting the computer to shutdown or restart, popups of computer file at startup.

    It only popup once when turn on or restart the computer, it will pop up when the window loads in.

    NOTE: 1 update Microsoft Security Essential 13/02/2012 complete scanned with no internet. computer clean result that found nothing.

    "2"msconfig"- isn't the problem, it does not display"my computer ' or 'library' or 'my document'.

    3. regedit - is normal, there is no dub or any other person.

    4 start / all programs/startup folder is empty, so that not reslove the problem.

    5. all the above solution 1-4 of the method are not good for my problem. everything is normal except that popup folder machine to start lol.

    6 no solution.

    Please do not click or put answered when it is not really answered. If one of the solutions that could solve part of your problem, then please leave a response full info details why & what & how and what solution has helped you. To ensure that microsoft workers, people and I don't get confused. and the post age thinking it is already solved the problem like many others. Thanks :)

    =====================================

    last update 24/02/2012

    When I plug in my new Logitech webcam a message popup and ask me to sign up. I never clicked register and this fixed the really weird problem but is it solved the problem.

    If someone has the same problem try 'Adi B', "try * 3", "Ronnie Vernon", method "Bradley Thomas. (Thank you all)

    If continue it problem remove or disable any startup like Logitech, Seagate, microsoft or other product which requires you to register. Hope this will help someone that you have this problem.

    No, in Safe Mode nothing opens. It is normal mode without failure. And no I haven't run any AV software, beside you cannot have only one AV software installed.

    But I figure out I fixed the problem thank you very much for trying to help me.

Maybe you are looking for

  • Satellite Pro A300 - audio glitch occurs every time that fans lights

    Hello I bought a Pro A300 under XP for the production of music and performance, but it is an audio click/glitch occurs every time that fans lights. I used latency Checker and can confirm that it is the fan that is causing the Spike, and so the click.

  • Amazon freezes my Macbook from mid-2009

    Hello I own a Macbook of mid-2009, which worked 10.11.3 and all applications without problem. I use a wireless network. Today, I opened my Firefox browser and go to my Amazon Web page in Firefox. He is in charge and then except for the mouse pointer,

  • Bike Z Play of wireless charging

    You can load the bike Z Play wireless without a battery mod? Rep of Verizon CS has said yes and sold wireless charger dock without battery... Do not load or save the phone during a doc (and I have no battery mod - I love my thin phone thank you). I t

  • ATFX DataFinder

    Hello Currently, I have following problem with ATFX (ASAM ODS) files and the DataFinder. ATFX data contains several matrices for different sampling rates high. The DataFinder can only create an index for the files that contain only a matrix. If I was

  • System API Monitor

    I try to install the NISysMon API using the link OR system monitor download here the knowledge base article: http://digital.NI.com/public.nsf/allkb/C67D5C1D64E77E1D862575780060CFCF In the Readme I don't see CVI as an interface supported and when I lo