The Task Manager will not end task?

Similar Questions

• HP Pavilion 15 - ab 155sa: download the BIOS update will not end

  I was prompted to download HP Notebook System BIOS update (AMD processors. ) The "Setup" screen confirms that it is to install the update of 8,89 MB but does not end. I tried three times wait more than an hour each time with success.  Would appreciate your advice on how to solve the problem.

  I was able to get this problem solved by Mike via online do chat on case no 3027047713 (disconnect WiFi problem). Using remote on my laptop, it was able to download the proper drivers. So far, everything seems to work ok.

• Remote Update Manager will not end

  I try to use the Remote Update Manager to update the PCs in our field, but RemoteUpdateManager.exe does not close, it just hangs. The log looks like this

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | ##################################################

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | ##################################################

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | Launch of the RemoteUpdateManager...

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | RemoteUpdateManager version is: 1.7.0.25 (BuildVersion: 1.6;) Brand: Kills Sep 02 2014 07:02:05)

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | **************************************************

  04/11/14 15:19:27:374 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | Initialization of library of UpdaterCore...

  04/11/14 15:19:27:484 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | UpdaterCore library initialized successfully.

  04/11/14 15:19:27:484 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | **************************************************

  04/11/14 15:19:27:484 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | Departure UpdaterCore CheckForUpdate...

  04/11/14 15:19:29:730 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | CheckForUpdates is completed successfully.

  04/11/14 15:19:29:730 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | **************************************************

  04/11/14 15:19:29:730 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | Departure UpdaterCore DownloadUpdates...

  04/11/14 15:19:29:730 | [WARNING] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | No new update there. It seems that all of the products are up to date.

  04/11/14 15:19:29:730 | [INFO] |  | JEAN | Public services | RemoteUpdateManager |  |  | 2164 | **************************************************

  
  

  What I don't get is the part "Ending the return Code of RemoteUpdateManager (0).
  

  
  

  I use the last AAMEE.

  
  

  Are there other things I can do to see why this is happening?

  I opened a support request on this matter.  Apparently, it is a known issue and is being developed.  Their current solution was just to stop the process manually.  Kind of a bad solution but little matter I just created a scheduled task to run once a week and then stop the process after 4 hours.

• The application manager will not let me download Photoshop CS6.

  When I try to download it, a message saying epops I can't because a beta version already exosts. I deleted it, what do I do now?

  You don't do it right. Refer to this:

  Adobe forums: FAQ: how to uninstall the beta version of Photoshop CS6?

  Mylenium

• Adobe Application Manager will not install Illustrator

  Even after a start cold on my PC, the Application Manager will not install Illustrator. The download ends, then said there is another application running, but nothing appears in the Task Manager. That is what it is?

  What application runs in Adobe Application Manager? Please send a page if possible.

• The print queue will not empty the first task he accepts to print.

  I have a PC with XP operating system and a HP Officejet 6500 E709a.

  On there are 5 or 6 days, I had a set of updates to Microsoft for various things, which, as usual, has been installed.

  Since the printer has stopped catalogue mid and holding the paper for about 3 minutes before he spits unfinished.

  The job remains in the queue and will not itself should be deleted, so I can not print anything else.

  If I reboot I get sometimes to print a page, but this work is still in the queue until I restart.

  I uninstalled the software and reinstalled the software from the HP using (OJ6500vE709_Full_14.exe) website.

  I still have the same problem

  Help!

  concerning

  Roger

  Any chance to test the printer USB option?

• After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  After the blackout, VMs will not start and Vsphere Client cannot be re management/access / start VMs on a physical server.

  Get the error message...

  [	[: start: W: 1] 2016-06-09 14:41:36.562 Log for vSphere Client Launcher, pid = 4532, version = version 5.0.0 = build-455964, option = released
  [	[:QuickInf:W: 6] 2016-06-09 14:42:20.421 the value of the search dll C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0 path
  [	[:QuickInf:W: 6] 2016-06-09 14:42:24.281 load shared dll: C:\Program Files\VMware\Infrastructure\Virtual Infrastructure Client\5.0
  [	[ : start: w: 6] 2016-06-09 14:42:41.406 Log for vSphere Client, pid = 4532, version = version 5.0.0 = build-455964, option = release, user = root, url = https://192.168.10.200/sdk
  [	[:ShowExcp:W: 6] 2016-06-09 14:42:42.406 error: an internal error has occurred in the vSphere Client.

  Details: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  Contact VMware support if necessary.

  System.TypeInitializationException: The initializer for type for 'VirtualInfrastructure.Utils.ClientsXml' threw an exception.

  at VirtualInfrastructure.Utils.ClientsXml.FetchIfClientsXmlExists (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.LoadMatchingVI (String serviceUrl)

  at VirtualInfrastructure.LoginUtils.CreateNewService (String serviceUrl, ClientSpec clientSpec, Boolean waitForTopology, Assembly / viAssembly)

  to VMware.Vim.Client.VimClient.StartUp (2 specMap, String [] arguments dictionary, Manager of LoginEventHandler)

  to VpxClient.UI.InitializeVimClient (dictionary 2 specMap, String [] arguments)

  to VpxClient.UI.StartUpIfNotMultiVcSecure (dictionary 2 specMap, SecureString password, String [] arguments, LoginEventHandler Manager, String, dllPath, list 1 listOfVcUrls)

  System.TypeInitializationException: The type to 'VirtualInfrastructure.Utils.TypedXmlSerializer ' 1' initializer threw an exception.

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.ctor)

  to VirtualInfrastructure.Utils.ClientsXml... cctor()

  System.IO.IOException: The process cannot access the file "C:\Documents and Settings\XXXXUSERNAMEXXXX\Local Settings\Temp\nyhn4bev.dll" because it is used by another process.

  ...

  to System.Xml.Serialization.XmlSerializer... ctor (Type type)

  to VirtualInfrastructure.Utils.TypedXmlSerializer'1.cctor)

  -End of the exception stack trace internal-

  -End of the exception stack trace internal-

  After many unsuccessful attempts tried to connect Vsphere client, the client has finally connected and was able to on all virtual machines. Thanks to Luciano Patrão for study. For all in the community, peace out...

• The song will not end before it passes to the next song

  I have the first generation iPad Pro with the latest IOS 10.0.2.  Since I've upgraded to the latest iOS, I had a problem with playing music from my playlist.  The problem is this: when I play music using the shuffle, some songs will be will not end before jumping to the next song.  If I use repetition, it seems to work ok, but will only go through the playlist once and I have to restart.  So, I prefer the shuffle.  I tried pointing out both mix and repeat (Yes, they both remain highlighted) but I have the same thing.  It began with the last updated with iOS.  Is there a setting somewhere... ?  I'm doing something wrong...?  Any help would be greatly appreciated that it becomes boring.

  Thank you for any assistance.

  I had a few problems strange playlist music apple since ios 10.

  They all seemed solved for me by disabling the library icloud music on my ios devices, turn off the music apple in the music settings, then reactivation everything and leave. Don't worry not all the playlists and albums etc will be there even when you reactivate library icloud.

  Unfortunately, it removes your music the device offline, but as long as you don't mind the download again it should hopefully sort your problems

• Access Manager will not see this website need a supervisor password. This Page has been blocked by your approved Sites list.

  kb956196

  Access Manager will not see this site, supervisor password needs.  This page has been blocked by your approved sites list

  We have forgotten the password. is there a way to reset the password or to disable it without the password?

  Hello

  Download and run the http://www.nirsoft.net/utils/conadvpass.html program (if you are able to access the site)

  If not, perform this task:

  "If you have forgotten the password of Access Manager, you can remove it by accessing this folder in Regedit (don't forget to back up your registry first):

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\

  CurrentVersion\Policies\Ratings

  Select the key called icon in the right pane and press on delete. Close Regedit.

  Now, you can start Internet Explorer and goto tools, Internet Options... Select the content tab and click on disable. When asked a password, do not write, just click OK. This will disable access Manager, since nothing is more a password. You can enable it again as soon as invent you a more memorable password"

• iCloud account will not end check

  On my iPhone 5s under 'settings', the iCloud account check step will not end.  Just, the wheel turns and turns, without end.  iTunes account works fine. Never seen this before?

  Try to hard reset your device (sleep/wake and Home button for 30 seconds)

  You can also try and reset your network settings settings > general > reset > reset network settings.

  Hope this helps, good luck to you.

• Initial backup, Time Capsule will not end.

  I recently started to use my Time Capsule to back up my early 2014 MBA 13 '' again. However the initial backup will never end. The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  When I started having this problem initially. I erased the disc TC and more fresh and Time Machine, under System Prefs, told me that the backup has been chugging along just great. Well... now, after he had all of August to reach the end of time Machine always shows me "waiting for full first backup."

  If I choose "save now" widget menu bar or if I let the system restart automatically backups TM shows Control Panel "backup x of x, XX, XX" and the second number continues to increase. The backup will never end.

  I searched the Ko of Apple and these discussion forums and not found the answer. What can I do to make this backup finish?

  TIA.

  The TC is not used as a Wi - Fi router; It is connected to the existing wireless network.

  And that's probably the problem, because Apple does not officially support backups Time Machine to TB unless you use the wireless TC, or connect the Mac directly on the TC using a wired Ethernet cable connection.

  Things can work with your existing wireless network, but it will be no help if it is not. Sometimes in situations like this, a Mac will back up OK wireless, and another Mac will have problems.

  As you try to add 'new' backups 'old' backup, Time Machine can also have issues with this, try to compare the old and new files and get confused about what to keep and do not keep. In this case, the recommended solution would be to delete older backups of the MBA and then start again and try a new backup.

  Wireless is never recommended for a first full backup. It's OK to use it, then much smaller incremental backups.

  If you try this course the existing wireless you have and still have questions, other than to try to save on the wireless TC, on the only other option to try would be to connect the MBA directly to one of the LAN port <>- on the back of the TC using an Ethernet cable.  Since you have an MBA, who does not have an Ethernet port, you can buy a bolt of lightning for the Ethernet card.  Maid in Gigabit Ethernet Adapter - Apple

• Firefox does not start, the Profile Manager is not available

  Firefox worked, then update it does not start. I tried all the fixes; However, the Profile Manager is not accessible or even present in the execution file. I unintalled and reinstalled several times, but I still can't get it to work. There is no Windows or Norton firewall block so I do not understand. What can I do? I want to use Firefox because it's the best browser; but now I'm forced to use Oscar. It's not terrible, but I prefer the features I've had with Firefox

  I had upgraded to the latest version; but the thought of demotion to the version which worked perfectly. In the end, I had to defrag, do a registry clean and optimization of performance of PC, but for the upgrade launched. So, I'm happy to say that I reply to this post with my Firefox browser. Thank you very much for your help. If all goes well, I won't have problems.
  DoubleD52

• WALKMAN NWZ-S545 gives error cannot start (error 10) device in the Device Manager (and not driver for this device found)

  Under Xp (sp3), Device Manager gives me an error for a Walkman NWZ-S545.  XP sees it as a MTP device, but it does not start.  The Device Manager will give me 2 error messages: device will not start (code 10) not and no driver not found for this device.  The walkman works very well with my other machines on the LAN XP but naturally one that I run my media (a all my MP3 etc.) is the one that has the error.  All of my PC are almost identical (with the exception of the server, duh).  I changed USB ports, uninstalled/reinstalled drivers, called SONY to dozens of times, nothing works.  Is a service not started that must be, a driver damaged, what?  Thanks for your help in advance.

  Hello

  I suggest you run the fix that is present in the link below then connect the Walkman on the system and see if the problem is resolved.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

  http://support.Microsoft.com/kb/943104

  I suggest to uninstall the drivers and firmware for the walkman of the system then download it from the Sony site and install it on the system and check if the problem is resolved.

  http://eSupport.Sony.com/us/Perl/SWU-list.pl?MDL=NWZS545&SelectOS=7#div_pos_94

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart Premium C309-g: the drivers and the printer software will not be installed.

  My network all-in-one Photosmart Premium C309-g worked very well on my desk until recently, when suddenly the HP software could still see and connect to the printer, but Windows 10 could not. I tried to remove the printer and uninstall all associated software, then tried to reinstall the software. Unfortunately, the installation will not get to the point where it starts and then suddenly disappears with no trace of her still running in the background. I can deviate from the default installation and bring to the top of the page to select the components that I want to install, but when I do the button 'ok' on this page does not work. No matter how many times I click on it, the page remains open and the installation will not so fast. If I click Cancel on this page, it disappears and the installation back to the previous page, where I can choose to continue and happen almost immediately out of sight again. This happens whenever I try to install selected software and drivers. I deleted the printer from the devices page in the Panel, I made sure to this it is not is more listed in the Manager of peripheral devices (printers and imaging devices), I removed the Windows 10 print queue and I deleted all the data of the folder under the Program Files (x 86) HP folder on my hard drive. I also disabled Windows Defender and run the installer as administrator, yet none of these steps help the process at all. I have never, in my 20 + years using nothing other than printers HP, encountered a problem like this. I'm used to receive error messages during the installation of software to fail, but I have never had a process simply disappear from the computer without leaving any trace of never having run. I hope that someone out there has an idea, that I have not thought yet, transferring files to my tablet to print from becomes a pain in the rear.

  A man who took the freedom of another man is a prisoner of hatred, he is locked behind bars of prejudices and narrow-mindedness. I am not truly free if I take freedom away from someone else, as surely as I am not free when my freedom is taken from me. The oppressed and the oppressor similar are stripped of their humanity.
  ~ Nelson Mandela

  Welcome to the HP Forums @GarfieldFan1969,

  I understand the printing software will not fully installed for your Photosmart C309 on your system Windows 10, and I wanted to answer with my suggestions for trying to help! Here are my suggestions for you to try. When you are finished, please let me know the results and problems or errors that you may encounter!

  First step: clean boot, restart the PC and try the install again.

  1. start by typing "msconfig" in the search box of Cortana, and then click MSConfig (run command)
  On your keyboard press Windows + R key at same time and type Msconfig in the run window, and then click OK or press ENTER.

  2. now, choose Selective startup

  3. Remove the check of the Load Startup items

  4. click on the Services tab

  5. check "hide all Microsoft Services" and then click on disable all

  6. click apply , then OK

  7 restart the PC and temporarily disable firewalls or antivirus programs

  8 run the Installation Wizard for Windows HP printer to install the printer

  9 turn on the firewall and start services

  Second step: you unregister and re-register the Windows Installer Service:

  1. hold down the Windows key + R to fill the box "Run" and type cmd.exe, and then click OK.
  2. at the command prompt, type msiexec /Unregister , and then press ENTER.
  3. at the command prompt, type msiexec/regserver, and then press ENTER.
  4. at the command prompt, type exit and press ENTER to close the command prompt.
  5. run the Wizard for Windows HP printer installation

  Step 3: run System File Checker Scan (up to 3 times) to repair the corrupted system files:
  1. go to start
  2. type CMD
  3 right-click and run as administrator
  4. to check and repair the OS type sfc/scannow (note the space between sfc and ' / ')

  You may need to run this upward to 3 times to solve all the problems

  When finished, it will say one of three things
  Windows did not find any breach of integrity (a good thing)
  Windows resource protection found corrupt files and repair the (good)
  Windows resource protection found corrupt files but was unable to fix some (or all) of them (not a good thing)

  Try to reinstall the printer.

  Step 4: activate the built-in Windows administrator account

  source

  1. first of all, you'll need to open an administrator mode command prompt by right-clicking and choosing "run as Administrator" (or use the shortcut Ctrl + Shift + Enter in the search box).

  Note that it works the same in all versions of Windows. It just search for cmd and then do a right-click on the icon of the command prompt in the start menu or the boot screen.

  

  2. If you are in Windows 8.x or 10 you can click on the Start button and choose to open a command prompt in this way.

  

  3. now type the following command:

  NET user administrator / Active: Yes

  

  4. you should see a message that the command completed successfully. Log out, and you will now see the administrator as a choice account.

  (Note that this screenshot is for Vista, but it works on Windows 7 and Windows 8 and Windows 10)

  

  You will notice that there is no password for this account, so if you want to leave it enabled, you must change the password.

  Try to reinstall the printer.

  

  Testify of my answer by hitting the thumbs to the top slot

  Click on the button "Accept as Solution" if I helped you reach a solution.

• All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.

  All the ' * .exe ' programs will not start by simply clicking on the shortcut icon.  I need a right click and select "Run as Administrator" to get the program to run. By clicking on the left, a box opens, which says "Windows cannot open this file: file iexplore.exe (example)". ""  It then goes on to ask if I want to use the web or select a program from a list of installed programs. Is there a way to get this back to "normal"?

  Hello

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be harder to detect as
  the cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
  It will display all the infections in the report after you run - if it will not run changed the name of
  TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
  check with the other methods below.
  http://support.Kaspersky.com/viruses/solutions?QID=208280684

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  SuperAntiSpyware Portable Scanner - free
  http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGE

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
  MALWARE IS STILL PRESENT).

  You can try a repair install or an upgrade in Place.

  You can use another DVD that aren't copy protected but you you need to own
  Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
  machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
  good backup or 3 (security in redundancy).

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  =======================================

  For extreme cases:

  Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
  This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
  uses aggressive methods to detect these threats, there is a risk that it can select some
  legitimate programs for removal. You should use this tool very carefully and only after
  you have exhausted other options.
  http://us.Norton.com/support/DIY/index.jsp

  ================================

  If you are in North America, you can call 866-727-2338 for virus and spyware help
  infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
  international information, see your subsidiary local Support site.

  Microsoft support - Virus and Security Solution Center
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#TAB0

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">