The text is legitimate or not?

Similar Questions

• To create a text box with a colored background but the text didn't appear not

  I'm doing a map of color-coding. It's just a black and white base card, but I filled in the cities with different colors using the paint bucket tool, to show which region they belong to.

  At the bottom of the map is a list of five regional offices and the offices of the area covered by each of them. I was hoping to create a box around the text, and then fill it (the box) with the color that corresponds to that particular region.

  Using the rectangle selection tool, I call a box around the text and filled with color. The opacity is set to 100%, so the text behind it disappeared completely. If I reduce the opacity of the text appears in grey, but I want the text to stand out and to be black.

  Using the Horizontal type tool I tried to redo the text everywhere again. However, the text I typed (see the text layer name) was not appear.

  Then I went in the character window and clicked rest character, hoping that the text arise, but it still does not work. The blue fill layer covers the original text, but is there a way to keep this original text, always be black, in order to keep the blue background? Or redo the entire text again in a new layer (as I tried to do below) would make more sense?

  

  Change the blending mode of the layer of color, darker color should work well.

• Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it.

  Hello all: I have a problem with my Illustrator? When I export final work, the text that is does not, I can config it? I have try several times, but still cannot fix it. inactiveforumnotifier Newsgroup_User Zoheir Illustrator

  What is the format of your final work? How are you viewing? What version of Illustrator do you use?

  Here are some common reasons why your type might be missing - is your type completely on the artboard and bleed?

  Is your type on a layer that is set up to print not? Is your white type and position it to overprint?

  

  

• When I start firefox browser display a erroe message containing the text "point_except_handler4_common of procedure not found entry into the dynamic link library msvcrt.dll" I use windows XP

  when I start firefox browser an erroe message appear that contain this text "the procedure entry point_except_handler4_common could not be located in the dynamic link library msvcrt.dll" I am using windows XP  in English
  

  This has happened

  Each time Firefox opened

  Is start mozila firefox

  This problem may be caused by a problem with the file c:\windows\system32\dwmapi.dll
  The dwmapi.dll file is a Vista file and must be present in Windows XP.

  See also [tiki - view_forum_thread.php? idforum = 1 & comments_parentId = 417674]

• Recently, all my email accounts refuse to forward messages with images. The text is sent, but not the image

  I have several email accounts, gmail, yahoo, hotmail, and qwest.  This problem started when Qwest took over my Windows Live accounts.  When I send a message that has the text and images as the pictures, the text does a good job, but there are only blank places where the image should be. This problem started at the same time, I installed Internet Explorer 9 and also deleted Qwest accounts Windows Live and Qwest in their place, which is very unpleasant and not ready for prime time.

  Hi DaveGerwig,

  Since it is a recent issue, try a system restore to a prior restore point you have been affected by the issue.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• How can I apply a shadow to the text of paragraph & there not as a system?

  Is there a way to text style, typekit, webfonts not system fonts?

  I wish I could have the styles, like the strokes, bevel etc on my text.

  Also, is the shadows to the text of the paragraph, not only title text, a widget for it?

  Thanks in advance.

  These features are not available for text in web browsers. They must be converted into images.

• Pull quotes - bringing the text forward, he's not coming!

  I'm doing a quote in a circle. I drew the circle, in fact the text wrapping, etc etc, but now the writing I'm putting in the circle will not come to the front. I made the option "forward", but it just won't come before be seen!

  Are you add text directly in the circle, or by adding new framework on top? I suspect the latter, and the text in this context is also affected by the text wrapping. Select the image, open the text frame Options dialog box and check the box in the lower left corner to ignore the dressing.

• E-mail recipients receive pictures with e-mail. The text is there - but not pictures

  What transmission and e-mail with pictures the recipients receive the text OK but pictures aren't there. I don't know of an attachment. Cordially Suzy

  1: you need to tell us what e-mail program using.

  2: If OE or WLMail, if pictures appear after the body of the message, separated by a horizontal line, they are joined.

• . Linked PSD placed behind the text block. Does not appear in the PDF export?

  So, I have an image as a .psd in my spread which is behind a block of text and a low opacity to ensure readability. However, when I export to PDF, it does not appear in the final file. Any ideas? Thanks in advance for any help.

  EDIT: now I found a work around using a PNG exported from Photoshop instead of the original file. Would be really nice to be able to use the PSD so if changes are to be made to the image, it can be easily updated.

  J

  Hi Justin,

  HM, then you must make a tough decision, your only choice to be on the "safe" side

  Export to PDF v1.3 (Compatibility Acrobat 4 (PDF 1.3) where you check "simulate overprinting" in the fourth tab of the settings of export PDF.

  This workflow is not recommended for PDF files you want to print:

  Just for the screen display!

  Then all the 'overlay' and 'transparency' is cooked in the PDF file so to speak.

  Here is a screenshot of my German OS:

  

  Uwe

• How to fix the text so it is not jumping when you type?

  I have Windows 7 on my Dell laptop.  When I type "anywhere" the characters jump all over the page, I type in.  How can I fix it?

  Hello Michele,

  A fairly common problem for laptops - its caused by the thumb, finger or palm (s) hit the Touchpad when you type. The infallible remedy only is an external mouse with Touchpad disabled. To do this, or just disable the Touchpad, go to control panel, select mouse properties and select the Touchpad tab in the top row of tabs.

  This will open an applet that allows you to select the order of Touchpad buttons, a check box parameter to disable the Touchpad when an external mouse is detected.  If you want faster access to this setting, make sure to display the icon in the system tray is also checked, and you will be able to access this setting in the notification area (bottom right of the task bar, click the arrow to access the Touchpad icon).

  To avoid problems to repeat in the future, make sure that if you go to Device Manager to "RID" the Touchpad you only disable the Touchpad as opposed to uninstall the Touchpad. If you uninstall the Touchpad, the next time you restart your computer, the applet will appear again back in place. You can only disable the Touchpad to get rid of him.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• The text of the e-mail under the column of the object does not match the selection

  When I get to my Inbox and select an e-mail to open the middle box and the text box below do not match the selection in the object column. This has occurred recently and only on my laptop. My office works fine. The central area and the text matching, this email has been deleted but the text won't just change and go. I'm going on a trip tomorrow, and if I can't fix this, I won't be able to open emails with possible solutions. I'll see answers but can't open them.

  right click on the folder, select Properties, and then on the button repair.

• The homepage of Firefox will not develop my text in the search engine when I am connected to my Google account. In other words, when the top of the page is enabled (that is, the bar tabs allow you to read: + you, search, Images, videos, Maps, news, etc.).

  Here are a few screenshots that highlight this:

  http://i.imgur.com/HpyDl.jpg

  http://i.imgur.com/BjAdf.jpg

  http://i.imgur.com/MCkbU.jpg

  What is happening in the screenshots is identified on the left in black text. Basically, I don't see the search field bar. I can still type and get results, but the text I typed will not appear.

  Please note that the Google bar upstairs is turned on because I'm connected. Now look what happens when I log out of it:

  http://i.imgur.com/oSoZ2.jpg

  I run on Windows 7 64 bit. I have the most updated version of Firefox. I run Adblock Plus, NoScript, and Greasemonkey as addons. Note that disabling of all persons does not solve the problem: only signature of my Google account.

  It's a very interesting discovery. A few people have reported this. But we thought it was Google break this page purposely because they intend to remove this special Firefox search page. They think it's too old and want people to upgrade to the most recent. But I'm still not sure why being connected to Google breaks this page (and signing patches), I believe that Google is here at fault and must update the code on this page.

  The new search page Google for Firefox is:
  
  topic: Home

  Screenshot:
  
  http://i.minus.com/iewA9S.PNG

  This is a special page that is integrated into the Firefox browser. That's why he has a weird Web site address that does not resemble the normal sites that use http://www., .com, .net, or. org.

• I have just updated my Illustrator and could not find the sidebar on the right that had all the text inside options (size, spacing, etc.) can anyone help!

  I've been using illustrator for some text work, before the update there's a sidebar on the right side that had all the means I could edit the text inside, it's not there anymore since Ive updated. How can I find it?

  Erry,

  We are talking about window > Type > character/paragraph/whatever, you can check (again)?

• Changing the text does not update the name of the layer.

  With Win7 and CS5.

  I just noticed something with my text in CS5 that differs from the CS3 and also for me, a step back.

  I made a text layer with words.  The words appeared as the layer name in the layers palate (I typed 'TEXT' on the screen and the text layer is named text for example).

  Then I double-clicked on the text icon and this field selected the word on the screen.  Then, I changed the word 'TEXT' for some other say word "WORD".  However, this new Word I typed in was not carried over to the name of the layer so the ancient name of the layer remained.

  In CS3, the name of the layer is updaed when the words on the screen are changed.

  I really want the new text update on the name of the layer.  Is it possible to fix this or is it just something in my system.

  Thanks in advance.

  JohnRich

  I just tested with Photoshop CS5 and CS6, and layer update for me names when I edited the text.  I have not configured something specific that causes.

  

  

  -Christmas

• Text entry box does not show all the text

  I'm creating a simple exercise where I want the user to copy text from the course, paste into word and report back what the number of words.  I thought that perhaps the text entry box would be the best way to go, since if you click the text (the default), you can copy it.  However after I place the paragraph of the text in the box and resize in the editor, until all of the text shows, it does not show all the text during playback is previewd or published.  It only shows the last words of the last row in the upper part of the box.

  Is there something that I am missing?  Or, is there a more easy/better way to do what I need?

  Thank you

  Hi all

  If it Captivate 4, there may be no need of a widget to do this. I'm guessing that you haven't tried allowing the scroll bar for the text of the entry (TEB) box?

  When I just plop a TEB on a blade, I get this in edit mode:

  

  During playback, it looks like this:

  

  But if I change the TEB properties and select the Show scrollbar option:

  

  I get this in the output:

  

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks