The toe does not work on iphones and ipads

Similar Questions

• TimeCapsule wifi does not work for iphone and ipad, but doesn't work for laptops

  I just got a new 3 TB timecapsule to replace my old 1 TB timecapsule.  Everything seems in place and I transferred all my data to the new.  Our computers two apple laptops gets wifi nine immediately, but our two iphones and an ipad receive no wifi.  They show that they are connected to a new network, but not WiFi.  Can someone tell me what should I do?  Thank you!

  On the iphones and ipad clear on all networks known. Restart the device and make a new configuration of the network.

  If they are later version idevices... test in the same room as the TC. Still have problems reset the TC and give it a new configuration... Use very short names, without spaces and pure alphanumeric characters. Test first without password... It should work fine... Then add a password... Make sure that it is as pure of 8 to 20 alphanumeric characters.

• Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How can I uninstall the programs of the

  Hello, I have creative cloud (programms photoshop, bridge, and lightroom on a HP Pavilion pc and UN laptop.) The laptop does not work more (broken) and I ' would like to install all programs on another laptop. How do I uninstall the programs of the broken laptop and not running before installing on a new? Sincere friendships Fabian

  Hello

  If you have access to the machine, turn off Adobe CC applications by the signature of the application.

  Please see connect and disconnect to activate Cloud Creative applications

  Kind regards

  Sheena

• Safari, suddenly does not work on iPhone and Mac

  An hour ago I recognized, Safari on iOS crashes, when I try to enter a url. I can still open sites I bookmarked. As I wanted to google the problem on my MacBook, the same phenomenon occurs on Yosemite. Just that Safari does not crash but seems don't take no action, when you enter a url. Restarted both systems and ran the last update for the phone. Anyone with the same problem or a solution?

  THX

  Settings > Safari > turn off the Suggestions of Safari

• Effects of the muse does not work in IE and the shifts contained in IE but everything is ok in all other browsers

  When I open my site in Internet Explorer the items which I have appointed as part of footer upward to the top just under the menu and behind all the other widgets in Internet Explorer, all other browsers, it works as should be. Also I turned on the effects do not appear in Internet Explorer. Any ideas? Others to stop using IE, I want to put a ban on IE to my work but can't because enterprise applications that need active x.

  Sorry the site is on a private intranet, so I can't give you a link.

  Good news is that the issue is not serious more that I thought about it on my own. I have trashed Muse, built the site in dreamweaver and it works perfectly in all browsers, so I have more blurry text, block that gets the release of Muse. So the ditch Muse was the answer.

• "ERROR: access denied"on the partition does not work no security and takeown tab.

  Hi assistants.

  It is my last resource to solve my problem, hope that someone can understand. Any help is appreciated.

  I'm unable to takeown to my hard drive using one of the following:

  • Run cmd as admin takeown /f l:
  • Log in as administrator, cmd, takeown /f l:
  • Takeown /f l,: run takeown in Safe Mode (with command line),
  It always returns "ERROR: access denied."
  
  
  In the beginning, I have removed all the user/group permissions via right click-> properties-> Security-> edit and he urged something on the legacy, so I followed this and removed everything. (Little I didn't know that it can't be undone...)
  
  
  Now when I right click on the drive and make appear the properties, there is no security tab and left click says access denied.

  Sorry, I'm just ideas. Here are the options I have for you:
  (a) see if you can do something when the machine with your repair CD Windows 7 starts in a Repair Mode command prompt.
  (b) save the file elsewhere, and then format the partition.
  (c) let me take a look at your machine (because it is four eyes see more than two).

  If you want to learn more about option c), send a note to pegasus_fnlATyahooDOtcom.

• Win7, installed on the RAID1 does not work Windows Update and messneger (SID problem)?

  Hi, first of all the machine description

  OS: Win7 Pro 64 bit Original and new
  MB: ASUS P7H57D-V EVO
  Processor: Intel Core i7 860
  RAM: 4 x 2 GB Corsair XMS3 CMX4GX3M2A1600C9
  Graphics: Ati Radeon HD5670
  HARD drive: 2 x WD GP 1 TB - 1 x Seagate 1 TB

  Problem: a bit long to explain...
  I first tried to install the OS on a RAID1, so initially I set raid in the bios with the 2 WD1Tb, then I created the table and I started the installation.
  WIN DVD it recognises the table, it starts installing, it made the first reboot, when is close to finishing it gives an error that cannot complete the installation. I spent 10 days trying to solve the problem without result.
  So I decided to work around the problem, I installed the operating system on a single hard drive, then I cloned the HDD for the RAID1.
  Everything seems to go well but... Update Windows and MSN Messenger will not connect, as having a problem of equality SID.
  If I clone the installation of work, everything works on a different disk included WIN UPDATE and Messenger.
  Cloned on the table, right.
  The table is correctly recognized by WIN7, I downloaded the latest drivers from the Asus MB site, but the problem remains

  What can I try?

  Thank you to everyone

  If 'update of Windows and MSN Messenger' [AKA Windows Live Messenger] are not connected, the chances are it is a network problem. And then...

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2. If Win7 64 bits is pre-installed on the computer when you bought it, a free trial Norton or McAfee came preinstalled, too? (No matter if you have never used or activated).

  =======================================

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows7/how-can-I-tell-if-my-computer-is-up-to-date

  How TO activate the automatic update enabled or disabled
  http://Windows.Microsoft.com/en-us/Windows7/turn-automatic-updating-on-or-off

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list installed updates (Vista & Win7).

• \\HOME-server is not accessible. A device attached to the system does not work.

  I use Windows 7 Professional. My network server is WHS V1.

  I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
  All of a sudden it has stopped working.
  I get the message
  \\HOME-server is not accessible. You might not...
  A device attached to the system does not work.
  
  
  I searched in the WHS forums, a post suggested http://www.howtonetworking.com/Troubleshooting/notaccessibale0.htm
  I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
  31 system error has occurred.
  A device attached to the system does not work.

  And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
  53 system error has occurred.
  The network path was not found.
  However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
  I did a system restore until the problem occurred first to rule out any changes to the system.
  The problem occurred again.
  This means that my Sync Center shows none of my synchronization partnerships.
  Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
  TIA
  Hello
   
  The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
  Please visit the below mentioned link to find a community that will provide the support that you have requested.
  http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
   
   
  Thank you

• I dropped my iPhone 4S and now the touchscreen does not work. Is there a way I can fix it without having to buy another or should I buy another?

  I dropped my iPhone 4S and now the touchscreen does not work. Is there a way I can fix it without having to buy another or should I buy another? (my screen is cracked)

  From what I see, Apple does not screen repair for any older than the iPhone iPhone 5. I don't see off-warranty, replacement cost for 4 on their page of repair, but I'm figuring you would spend at least $200 to get a new.

  Would be better to see if your cell phone operator has the options of upgrade for you.

  ~ Lyssa

• iPhone 5: objective of the camera does not work after update iOS 10

  Hello everyone.

  I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

  I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

  The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

  I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

  PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

  Hello

  I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

  After this answer please.

  Thank you Will

• The jump button does not work on iPhone

  Skip to the next song button does not work on iPhone. When you press the jump key, instead of going to the next track or shuffle to the next song, he repeats / restarts the track that is currently playing. Even when the song ends, it starts all over. It's like all my songs are stuck on repeat. The only way to change a song is by manually choosing a different, or by manually typing the shuffle button. Everything worked great yesterday. I asked several of my friends to check my conclusions, and they have confirmed the same questions. If anyone knows how to fix this help please.

  Hello Gus87,

  I understand that your iPhone seems to be stuck playing the same song, regardless of your attempts to move to the next track. This may be due to the function "Repeat" enabled in the current reading on your iPhone screen.

  

  • Control playback. Tap a song to play and show the Miniplayer. Tap the Miniplayer to display the now playing screen, where you can do the following:

  Repeat steps. Press on to repeat an album or a playlist. Double click to repeat one piece.

  iPhone user Guide - play music

  http://help.Apple.com/iPhone/9/

  See you soon!

• I have a hp m175nw printer. email prints from my iphone, but the image does not work

  M175nw printer. email prints from my iphone, but the image does not work

  If the DPI (dots per inch) is less than 100, the printer will not print the photo because it would be too low in quality. Draw the image on the computer, then right-click on it and click Properties, check the horizontal and vertical dpi and see if these figures are less than 100. Have you tried to connect the iPhone to the same network as the printer and try to AirPrint peak? AirPrint road doesn't have the same requirements on IPR as the ePrint.

• using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

  We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

  Hello

  Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

  (If you use it, switch to the default theme).

  • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
  • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
  • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
  • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

  

  Once you get the pop-up, simply select "" boot mode safe. "

  

  If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

  To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

  When find you what is causing your problems, please let us know. It might help others who have the same problem.

  I hope this helps!

  Curtis

• Satellite W30T-A378 from - touch pad and the keyboard does not work

  I have a problem with my laptop, the touch pad and the keyboard does not work.
  Can someone help me what is the possible cause?

  Thanks in advance.

  Hello

  I guess you checked if the Tablet has been properly connected to the docking keyboard.

  Have you tried to unplug and plug the docking again?
  Note: there is a latch on the left you have to move and in order to remove the tablet.

  Perhaps there is a connection problem.

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.