The Touchpad right button does not work on the Satellite Pro L series

The icon in the taskbar indicates that the right button is permanently pressed, if it is not.
So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving.
I listen to the radio a lot and do not want to display on.

> The icon on the task bar shows that the right button is permanently pressed, if it is not.
> So I can't right click at all. A radio mouse works fine, but there are times I want to use the touchpad.

This could be linked to defective button. If you cannot use the right button, and the button appears to be clicked down, then I suppose that its hardware malfunction.
In this case it must be replaced.

> In addition, the screen does not turn off, and the computer goes to sleep after the hours set in the options of energy saving. I listen to the radio a lot, and don t want the display on.

Have you chosen the right power Plan? In Control Panel-> power options you have to choose the diet plan and should click: change plan settings. Here, you can change the time when the display must be disabled.
If this does not work, then I guess that this feature does not work because you press the button of the touchpad and the windows OS think that the notebook is in use

Tags: Toshiba

Similar Questions

  • TV out button does not work on my Satellite Pro M30

    Hello

    I installed Windows XP SP2 and all drivers for M30 but the "TV out" button does not work although I have also installed the tool "Controls Button from Toshiba" (continues to ask to be assigned to a program), it worked before installing the new.

    I also noticed that the "Fn + F5" also does not work too (eg. do not send the signal to the TV).

    Can anyone help?, thanks in advance.

    Hi Karim

    Write about you? :)

    In any case, try to install TOSHIBA common Modules again. Maybe it helps!

  • Support of button does not work on my Satellite U200-128

    Guys I need help. Support of keys still does not work on my Satellite U200-128. I installed the correct PVAT for that I downloaded on the site Web of Toshiba. Also the FN key doesn't work dimmer.
    I have tried to register using the button for his actions, but still don t work.
    Can someone shed light on this? The original operating system for my laptop is XP which I've upgraded to Vista. I installed the version of PVAT vista on my laptop already.
    Help, please! :(

    Hello

    At first, I have to say that I believe you have Satellite Pro, but not satellite model. So the question is: have you really downloaded material for your laptop model.
    As I see you have Satellite Pro U200 with model PLUA1E number. Right?

    In any case, on the Toshiba download page there not many things that must be installed for Vista. I just hope that you have installed all in the order of good facilities.
    Please try to restart Flash cards one again. You can do this at the start > all programs > Toshiba > utilities > restart flash cards.

  • The Microsoft Wireless mouse right button does not work

    The right button of the mouse on my Microsoft Wireless Mobile Mouse 4000 does not - at first I thought that it was a hardware problem, but when I used the mouse properties/control panel to change the buttons on the mouse, the right button worked and the left mouse button does not, which leads me to believe that it is related to the software/driver.
    I have the latest version of the driver/Intellipoint software.  I am running Win 7 32 bit on a Lenovo ThinkPad T410.
    Change the port USB did not help; the problem persists, no matter which USB port I use for the receiver.
    Reinstall the software Intellipoint also did not help.
    It is a recent issue; I had the mouse for several months and it has worked well upward until a few days ago.
    Googling the problem that leads me to believe that it is a common problem, although most people seem to think it's a hardware problem.

    Hello

     
    Run the Fixit described in the article:
    Troubleshoot a wireless mouse that does not correctly
     

    I also suggest you to remove the batteries in the mouse and keep it idle for 10-20 minutes. Insert the batteries and check it out.

     
    See also:
     
    Troubleshoot the incidents of the response to the mouse or wireless keyboard
    http://support.Microsoft.com/kb/838398
     
    I hope this helps.
  • Web Cam does not work on my Satellite Pro C850-10 t

    Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

    What should I do?
    Thanks in advance :D

    Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
    Webcam is entered correctly in the Device Manager?

  • Touchpad does not work on my Satellite Pro L870 - 18G

    My touchpad suddenly stopped working. I had the laptop on the way "sleep" for a few hours and when I came back the touchpad did not work... The touchpad has a habbit of deaktivating itself for no reason, but now it is enabled and does not. Very annoying!

    I tried to download the driver again to reinstall it, but it is not listed in the section driver for my laptop?

    Any ideas?

    Touchpad (mouse) registered and installed correctly in Device Manager?
    Touchpad may be disabled? Make sure that the touchpad is enabled correctly.

    By the way: what model of laptop and operating system are you using?

  • USB 3.0 does not work on my Satellite Pro L50

    Hello boffins.

    I have a problem with the driver for the Intel USB 3.0 eXtensible host controller on my L50 (running Win7 64 bit).

    I recently took my L50 Pro Satelite (PSKK3A-001001) to the repair shop because the blue ports were not running at speeds of USB 3.0 when I plugged a USB 3.0 compatible device (a WD 1 TB HARD drive). When I looked in the device tab "Display connection" Manager, HARD drive showed as connected to the ordinary C220 USB hub which is for USB.2.0. USB 3.0 eXtensible Host Controller has been inactive.

    The technician in the repair shop said:

    + I tested your machine with a new installation of Windows 8 and have been able to achieve speeds to 180 MB/s of my FlashDrive USB 3.0 without problem, which indicates that it is a matter of faulty software. We can improve your Windows 8 machine free of charge if you prefer, but I'm unable to solve the problem in Windows 7. From what I can tell, and what you have experienced, no published 3.0 for Windows 7 USB drivers can recognize the 3 USB ports installed as a USB 3 connection. If you are wanting to stick with Windows 7, I can't guarantee that you will reach speeds of USB 3.0 by using these ports. +

    It's not really good enough, Toshiba. Now, I bought this machine specifically with pre-installed Win7 (because Win8 is rubbish) that I wanted a machine Win7, including USB 3.0 ports. This machine has been published as such, having Win7 installed with 2 x USB 3.0 ports and 1 x USB 2.0. This is confirmed by the page of the specifications of Toshiba here: [http://www.mytoshiba.co.nz/support/computers/satellite/pro/l50/pskk3a-001001/specifications].

    So, my question is this: why this machine is the drivers needed to run it as advertised (i.e. under Win7 with 2 ports USB 3.0 x and 1 x USB 2.0) and if there are drivers for this device available, where are they? I tried and tried the repairman (I guess) but I'm still without a driver to run my USB 3.0 clocked ports. I tried age for the files to be transferred between pending devices.

    Maybe someone can help me find a driver that works or Toshiba will clean up their act and produce a.

    But you have installed Intel USB3.0 driver 2.0.0.102 version, right?

  • Media buttons do not work on my Satellite Pro 2100

    On my laptop Satellite Pro 2100, there are 6 buttons of media on the edge of it. I can't make them work. Any ideas? I have wmp11 when I press on them, nothing happens no break or anything cud anyone help me please.
    Thanks in advance.

    Jamie Holmes

    Hello

    Reinstall Toshiba common modules first and then the Toshiba utility controls!
    The necessary drivers and tools that you can find on the page of the Toshiba driver.

    Please return after installation and report your results.

    Good luck and see you later

  • Bluetooth does not work on my Satellite Pro L830-17 t

    Hello

    Can you please help me with this?
    I have a [http://www.toshiba.co.uk/discontinued-products/satellite-pro-l830-17t/] and I just bought a Bluetooth mouse for her.

    The device supports Bluetooth, but I can't see in Device Manager.

    I remember having the Bluetooth in the taskbar before I think, but after that upgrade to Windows 8.1 (provided with Windows 8) bluetooth seems to have disappeared off the coast of my system.

    I tried to install almost every driver software but to no avail. I have installed the Toshiba Bluetooth Stack and whenever I chose to open something, it says "Setup Bluetooth Device" but always then closes after asking me to "Please insert or turn on the Bluetooth device.

    I spent the better part of today trying to resolve this issue, but could not.
    Can someone please help me with this?

    KD.

    > I remember having the Bluetooth in the taskbar before I think, but after that upgrade to Windows 8.1 (provided with Windows 8) bluetooth seems to have disappeared off the coast of my system.
    The laptop supports Bluetooth without a doubt.
    The Atheros WLan / BT comob card has been installed in this unit and I guess that the necessary drivers have not been installed after the installation of Win OS 8.1,!

    View this document on the BT facility after a clean install of Windows 8 (Win 8.1)
    http://APS2.toshiba-tro.de/KB0/TSB2C03FI0001R04.htm

    The installation of the system driver Toshiba to win 8.1 as well as the filter of Atheros Bluetooth driver is very important. Without this software, BT is not recognized
    ?

  • Function keys do not work on my Satellite Pro L series

    I recently bought TuneUp Utilities 2012 to speed up my laptop and arrested a number of programs, including some of Toshiba which were included with my current laptop.

    Problem is that the FN key is no longer made up a screen what do my F keys, and the F keys do not work (so I can't hibernate with F4).

    Does anyone know what utility is responsible for the F keys?
    Thank you

    Fn keys are controlled by the Support of Flash memory card utility.
    The Support of Flash memory card utility Msconfig must be activated!

    In addition the utility of the Flash card is located in all programs-> Toshiba
    Here, you can restart this tool.

  • DVD/CD player does not work for a Satellite Pro C870 1CQ

    Hello world

    My name is Stephanie and this is all the info from my laptop. (parts included)

    I can't read any CD/DVD with my laptop.

    I can open the driver, insert a CD or a DVD. I can close the driver. It begins to spin, as follows. (That's a lot of noise as well) After a while it stops right turn.

    Nothing happens. Even when I look in the menu of my computer, the driver is not even mentioned there.

    I have 8.1 Windows on my computer. I already checked the FAQ, but everything I could find that might be useful is applied to Windows XP

    Can someone help me with this?

    Thank you!

    Kind regards

    Stephanie

    Hi Stephanie

    It is not easy to say what the problem is here. Is your defective optical drive or there is a problem with the lens. Try to clean it. I did it using liquid and cotton swabs for screens LCD cleaning.

    By the way: is the optical disc drive recognized properly in Windows Explorer or the Device Manager?

  • PS/2 mouse does not work on my Satellite Pro 4220

    Hey all,.

    I want to use a PS/2 mouse on my 4220 and it shows the mouse in the hardware section, and it shows that is working very well... However, I cannot use pointers on my laptop and not by the PS/2 mouse... no idea how to make the mouse work?

    Thanks for the help!

    Hello

    I na? t have experience with this device, but have you checked mouse properties settings.
    How do you connect the mouse? Did you use a PS/2 to USB adapter or appliance has a PS/2 port?

  • Driver Bluetooth does not work on my Satellite Pro 6100

    Hello

    My Bluetooth stopped working after a few updates (I forgot what they were!). I tried several times to reinstall the driver from Toshiba BT but it 'stops' part of the way through the installation: I left for much more than 30 minutes at this point.

    I looked in system/equipment/other devices and ago that something called SiW, I guess that's the BT device because I can't find anything about this is labelled Bluetooth. I would like to point out that the Bluetooth was working before and nothing has been removed from the computer.

    Anyone no matter what ideas / solutions to this problem?
    Thank you

    Andrew

    Hello

    It's not easy to say what you are unable to install the Bluetooth driver.
    I recommend you to reinstall the Toshiba Bluetooth completely form the operating system.
    Remember that MS Bluetooth has been deleted also
    Then restart the device and try again to install the Toshiba Bluetooth stack.

  • SD Card Reader does not work on my Satellite Pro P100

    Help, please.

    My card reader reads nothing at all. I have a P100-429. Could you please tell me how I make it work and what drivers to install?

    Thank you

    Hello

    Have you changed anything on the laptop?
    The laptop comes with preinstalled Toshiba recovery image and all the drivers and utilities are already preinstalled and you don t new drivers.

    In my view, you must first check if the card is compatible with your laptop.
    Are you sure that the laptop card reader supports the card to 100%?

  • Re: Satellite L655 - the Touchpad on/off button does not work

    This morning, I noticed that the power button of the touchpad of my Satellite does not, although the Fn + F9 key combination works by enabling and disabling my touchpad.

    It was working well until what I slept last night when I woke up, my laptop has rebooted due to updates of Windows during the night. I don't read anything since I have been using a wireless mouse. Then reach work and check if I can activate my touchpad (Windows has loaded and connected), the display screen that shows if the touchpad is active or not does not appear and my touchpad, power button does not work.

    Any help is greatly appreciated.

    Thank you.

    Is this problem only you?
    I mean it's not so important, and I would not reinstall or change anything because of this.
    Until you can use the FN + F9 key combination I put t think it's a serious problem.

    What do you think of this?

Maybe you are looking for

  • Using G Slim drive

    I use a Slim g drive to back up my computer.  A white light flashes.  Does this mean it's over? Also, I have never eject properly.  Can someone tell me how to do?

  • Satellite Pro L500-1 t 8 - How to install Win 7 if the recovery partition is damaged

    Hello I have a laptop Toshiba Satellite Pro L500-1 t 8 and his hard drive was damaged, so I can't recover the special partition (I tried also with the start of 0 - key). I have not create a windows restore disc 7 because no one told me to do! I would

  • Migration to a new Ipad

    Just got my wife a new Ipad.  A 4 to a 1st gen air movement. I have saved everything to a PC via Itunes and restored the backup to the new Ipad.  Everything seemed to go well, but she tried to access some PDF files and they appeared briefly but now a

  • screen and the custom of chdisk climb at the beginning remains empty

    Hi, I chose chdisc execution by clicking right properties c/player ect but when I restarted the laptop, it is towards the top of the dell screen and then it stays just black. I turned it off and on a few times, but it helped has'ent.  I tried to run

  • ARRIRAW converter exported file makes first crash.

    Hi allI am faced with one very annoying problem .we started a new project using camera Arri Alexa XT a couple of days. After some research we opted to convert the material to any Proxy format (Quicktime ProRess 422HQ or 444) using ARRIRAW converter w