the touchpad tab is missing from the control panel can be restored on vostor 1700 running xp

Similar Questions

• I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened.

  Add/Remove programs. I'm unable to open Add/Remove programs in the Control Panel, all other bits in the control panel can be opened. Any ideas? Thank you.

  original title: Add/Remove programs.

  Hi, Tay 13,

  Open command prompt window

  type the following command

  SFC/scannow

  Press enter

  Note: There is a space between SFC and / scannow

  Once the scan is complete, look for the journal by clicking Start > run

  Type

  %windir%\Logs\CBS

  Search for repaired files or cannot repair file and note the name of any file not repaired.

  New attempt to open Control Panel Add/Remove section.

  Open the command prompt window

  Type the following command

  appwiz.cpl

  Press enter

  This will open Add/Remove programs

• Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  original title: missing file

  Miss me the windows system32 rundll32.exe. I can't access the Add/Remove in the control panel.

  I tried to start - run with my c/d operating system

  I checked for viruses

  I purchase software to remove etc and REG files.

  Now that the devil do?

  Thank you

  If this

  I tried to start - run with my c/d operating system

  means that you have tried to use sfc/scannow from start > run, your experience is not surprising.  This 'solution' is often suggested by people who don't really understand what this command does.  It does not help to restore a missing rundll32.exe file.

  For what is

  I checked for viruses

  What is the name and version of your anti-virus application?  When (approximately) their subscription expires? What other antimalware applications installed?  What other antimalware applications you used recently to scan your computer?

  If you have not yet used the "software to remove the REG files and etc." return for refund or throw it out.  "Registry cleaners", 'tuners', etc. are not useful.  If you used to "clean" the registry, use its "undo" feature (if it has one) to restore the registry.  Longtime MS MVP PA Bear:

  TIP: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx

  What probably happened is that your antivirus application deleted or quarantined in your file rundll32.exe thinking he was infected.  He could have, but probably not.  In any case, read the post that begins, "That 'solution' is not on my list." in the following thread: http://answers.microsoft.com/en-us/windows/forum/windows_xp-performance/systemrundllexe-not-found/6e30aff2-a88e-4d86-a654-753d54f632d1 you can also read the rest of the posts in this thread.

  Note that c:\windows\system32\dllcache is a hidden folder, but you who type in the address bar of Windows Explorer (or copy and paste), the folder should open anyway.

  Assuming you manage to restore rundll32.exe, download, install, update and run full scans (not at the same time) with each of the following free tools.

  MalwareBytes AntiMalware
  SUPERAntiSpyware

• Programs disappear from my office and the program from the list but still appear in the control panel

  I use Window XP Home Edition and lately, I've noticed that programs have disappeared off the coast of my office and in the list of programs without allow me to delete them.  Firstly, this came to light when I went to start my virus scan and impossible to locate the icon or in the list of all the programs, but it is in the status bar at the bottom right of the screen. I have since discovered that other software have disappeared and when I will remove and reinstall them using the Control Panel can't do.  And when I tried to back up my data when it came time to burn data on a cd, I got a message asking me to insert a disk. Yes, he asked for a floppy and I couldn't have it burn the disk that was selected at the beginning of the backup.  A couple of days, I got the "blue screen" a couple of times and the computer turns off automatically. Oh yes, one more thing restore to a previous period will not fix the situation. Can someone tell me what is happening?

  Hi LarryFuller,

  It seems that your computer has been infected by the virus or malware. Scan your computer with the Microsoft Safety Scanner to get rid of the same.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• How to enable and disable the part of the "control panel".

  I want to know if part of the control panel can be turned on and off by an external action, to use the mouse or a Boolean variable. Someone has an idea that help color? Thank you

  Ricardo

  You can disable cookies by using the node property and ownership "Disabled". You can create a tab control and disable the entire tab control that will disable all inside of it.

  To do this programmatically, set up your code with a structure of the event and create an event when the user changes the value of a button or click the mouse.

  See the example I did:

  

• The Touchpad icon is missing from the taskbar

  The Touchpad icon is missing from the taskbar in the lower right and I can not turn off the touchpad.  How do I remedy this situation?

  Hello
  Control Panel-> mouse-> device settings

  Choose the static or animated icon.

  If its not working then reinstall your tuchpad driver. This should solve your problem.

  If you want to say thanks to someone just click on Vote as useful (i.e. under each avatar of the user).

  If your issue is resolved, please indicate then your wire is with solution.

• Option missing Scan from the control panel for my Officeject HP 8600 pro. How can I get that back?

  I have this printer for a few months now - it works well until today.  Option missing Scan from the control panel for my Officeject HP 8600 pro.

  I have Windows 7

  Access has been-

  Beginning

  Devices & Printers

  HP Officejet 8600

  He opens a box that had a detection option (later), which I clicked to bring up the scan dialog box.

  The option disappeared. I have no idea how it happened.

  How can I get that back?

  1. first of all uninstall the software

  • Click on start button, then go to programs > HP > Officejet 8600 and click on Uninstall.

  2. then go to Control Panel > programs and features

  • Officejet 8600-click and then click on uninstall a program
  • 

  3. then download the software on the HP web:

  •  HP Officejet 8600 - drivers and full software features - Windows 7 64 bit

  4 and install with the downloaded software.

  Hope these steps help you,

  * Click the stars KUDOS to say thanks

  * Click the accepted Solution if the answer to the question.

• Touchpad option on the control panel is missing

  The option of scrolling on my touchpad just up and disappeared yesterday.  I went to the control panel to adjust and it and couldn't find an option mouse or touchpad with scroll option.  Do I need to install new drivers?  I have a hp pavilion dv4 with windows 7.  Thank you

  Hello

  OK, try to download and install the ALPS driver on the link below.

  http://ftp.HP.com/pub/SoftPaq/sp45001-45500/sp45035.exe

  Once the installation is complete, restart the laptop.

  Kind regards

  DP - K

• touchpad doesn't work on my laptop. I can't find that everything about the touch pad in Control Panel. can you help me please?

  touchpad doesn't work on my laptop.   I can't find that everything about the touch pad in Control Panel.  can you help me please?

  Hello

  It's material is not a Windows problems.

  / Settings (BIOS/CMOS) often F2 as you start then look at the screen - make sure that is it
  is a toggle the TouchPad that it is enabled.

  Check with support of the manufacturer system, documentation online or forums that there is probably
  Shortcut keys that enable and disable the touchpad functions.

  Parameters for TouchPad located in the control panel - mouse (there may be several tabs with TouchPad
  entries) and some have a utility that loads in the Notification area next to the clock in the bottom right.

  ==========================================

  If necessary and the TouchPad makes its appearance in Device Manager: (make sure that you have restarted at least
  only once if the above did not work)

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touchpad - the driver tab-
  Click on update driver (it comes may not do anything like MS is far behind the drivers of certification), now right CLICK
  on the TouchPad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in). RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad from working.

  The similar procedure on XP, Windows 7 and Vista is the same, except that we need to clear the specific device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the system manufacturer's website and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  ==========================================

  This utility also allows to control the TouchPad:

  TouchFreeze
  http://code.Google.com/p/TouchFreeze/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Installed programs disappeared from the control panel windows 7 pro 32 bit programs and features

  Installed programs disappeared from the Control Panel programs and features on windows 7 only 3 programs which I recently installed appear to someone can help me

  Hi Akhilnath,

  This problem may occur because of corrupted system files.

  Did you the latest changes on the computer before this problem?

  
  Method 1:
  I would suggest to run the auditor of file system (CFS), parse and check if it helps.

  SFC scan will scan system files corrupted on your computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2:
  If the problem occurred recently, I suggest to perform the system restore and check if it helps.

  See the link.

  What is system restore?
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.

• Missing audio device of the control panel.

  Several days ago, I opened the control panel to troubleshoot an audio device. The Control Panel showed two audio devices:

  1: ATI PNP
  HDAUDIO\FUNC_01 & VEN_1002 & DEV_AA01 & SUBSYS_00AA0100 & REV_1001\5 & B0AB116 & 0 & 0001
  Driver c:\windows\system32\drivers\atihdmi.sys (7.11.0.7703, 114,00 KB (116 736 bytes), 02/09/2010 12:34 AM)
  2: REALTEK PNP
  HDAUDIO\FUNC_01 & VEN_10EC & DEV_0888 & SUBSYS_103C2A92 & REV_1002\4 & 19 19054 & 0 & 0001 c
  Driver c:\windows\system32\drivers\rtkvhd64.sys (6.0.1.6196, 2.37 MB (2 484 072 bytes), 07/09/2010 12:27)

  Both devices are still listed under system information/system/components tools, but:

  At some point during the configuration of the device from Realtek, ATI device disappeared from the control panel. Since then, I have found no way to adjust its properties, much less put on the control panel.

  The only other change observed: formerly the computer sounds internal (startup, error, stop, etc.) remained internal. Now, I can hear them through the external speakers - acceptable but not optimal.

  Any help would be appreciated.

  Milt

  Hello

  Could you post back with the full or part no of your PC model No.  Also, could you confirm the operating system you are using.

  Another thing to check is in the meantime.  Windows Control Panel, open Sound, right-click in an empty area of this window and check "Show disconnected devices" as «Show disabled Devices»  Another thing now appear?

  Kind regards

  DP - K

• My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume.

  Low sound volume

  My speakers on my Dell Latitude D820 suddenly emit only a low sound. I adjusted all the volume controls in the menu sounds from the Control Panel, and there is no change in volume. It's real power radio on the internet and play music from a CD inserted into my machine. The sound icon does not appear in the toolbar.  I tried the fixit of automatic Wndows and it ran and said low volume has been set. Not the case.

  Hello

  1. what operating system do you use?

  2 did you change on your computer?

  Method 1:

  I suggest you follow the link and check.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows?T1=tab02

  Method 2:

  I suggest to follow the link and search for the volume in the taskbar.

  (a) right click on an empty area of the taskbar and then click Properties.

  (b) in the Notification area, click Customize.

  (c) select the volume see the icons and taskbar notifications check box, and then click OK.

  I also suggest you to follow the link and check.

  Change icons appear in the notification area

  http://Windows.Microsoft.com/en-us/Windows7/change-how-icons-appear-in-the-notification-area

• want to remove some programs from my "adding and deleting' on the control panel

  I am wanting to remove some programs from my "adding and deleting' on the control panel.  I have several that I don't know if they are necessary in order to do not want to delete them until I have found.  Example: Microsoft.NET framework 2.0 service pack 2, if I said the same thing with the exception of program 3.0 can remove either one or both or what?  Redistributible MS Visual C ++ 2005 and also have 2008 and 2110.  Platform Installer 3.0, WCF RIA Services V1.0 for visual studio 2010.  I don't even remember downloading all of this stuff, but don't know if it has a meaning to my computer or not.  Y at - it somewhere I can look to find such information?  Don't like silly things like this, but would rather ask that screw up something.  Thank you

  Hello

  • What version of Windows are you using?

  I suggest you to see these steps:

  a. type msinfo32 in the start search box and press on Enter.

  b. a pop-up window, press CTLR + A, then CTLR + C and after that information here.

  c. then we can suggest you what program needs to be uninstalled.

  Response with more information

• How can I fix missing files that I can't get to the control panel?

  How can I fix missing files that I can't get to the control panel. I get error "Windows cannot find 'C:\WINDOWS\system32\rundll32.exe'. Make sure you typed the name correctly and then try again. To search for a file, click the Start button and then click on search"when I go to the control panel and click on add or remove the problem, and I get a similar message when I go to something similar

  Hello Braxtonspangler,

  I'm assuming that you get this error when you try to access some or all of the files/folders.  If this is the case, please see the link below.  Please let us know status.

  Microsoft Answers:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-files/Windows-cannot-find-cwindowssystem32rundll32exe/664c5b59-515C-472e-A872-a41f3e0562c1

  Thank you

• I can't get the automatic updates to enable secutiy tab in the control panel.

  I can't get the automatic updates to enable secutiy tab in the control panel. There are propmts me to light them mannualy in systems that they tab already, but they do not always allow me to turn on the automatic updates on the Security tab. I don't see the yellow shield appearing at the bottom RHS of the screen more updated?  someone know why?

  YAY. I got it fixed. I had to reinstall the automatic updates service and everything works. All updates now came through windows and the Security Center has all the lights GREEN.