The trio of Labview, card PT and Basler A - 610 camera F gray

Similar Questions

• HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  HOW smart card smart card slots look like? What are the differences between smart card slots and cards express?

  Hi Smitty,

  Yes, so ExpressCard is an interface that has a USB port to this topic where I can plug in external devices to be attached to my computer right? I did a search on google but could not find photo Card Slot smart. I need a picture to get an idea of how look like a smart card Slot.

  Next time try BING...

  http://tinyurl.com/95rgwxw
  http://tinyurl.com/9plc7zt

  http://tinyurl.com/8h96qsr

  Scroll to the left view (image 5)

  http://support.Dell.com/support/eDOCS/systems/latd610/en/ug_en/about.htm

• What is the differene between labview 6.1 and 2009

  someone is selling labview 6.1 without opening it first of all, I was wondering if it was legal and whether he would be completely obsolete.

  It's pretty much going to be obsolete.  You would have to use the old drivers and some current hardware will not be supported.  Also, it doesn't officially work on operating systems later (although I had it works great under Vista - haven't tried Windows7 yet).

  The differencesare too many to name.  Only, I come back and use it to support very old code. I'm now down to only a customer that still has their software in there and I don't have to do anything for them in a couple of years now.

  If you want to play with it, it might be worth if purchase is $100 or $200 dollars if you try to teach you or whether you want to carry out the full investment for the current version.  If they charge more than that, it's a scam and they are hoping to find someone who absolutely must have 6.1 and is willing to pay for it.

• I have the 8 in 1 card reader and it shows to be on, but nothing. What I'm I doing wrong?

  I had to work the other day, now he seems not to do something. When I first plugged into the USB port, the computer said that it does not recognize the unit. I left it plugged in, after a while the fire came. I put the sleeve on and nothing, I put in the memory of a phone chip, after a little green light came and there is still nothing of what I could find is. I had pulled the sleeve with the chip and the green light is out. When I reinserted it the green light came back on, but nothing like before.  As usual, Im at a loss.

  Does your Win7 computer or your computer Windows XP?

• Problem with the combination of LabVIEW (dynamic distribution) classes, statechart module and module FPGA

  LOCATION:

  -I am developing a software plugin based on plug-ins based on LabVIEW classes that are instantiated in running. Plugin real classes come from the plug in generic classes that define interfaces to the VI instantiation and can provide basic functionality. This means that many of the methods of the class are dynamic distribution and even methods of child classes can call the parent method.

  -Plugins top level (the ones directly accessible by the main VI) each have a run method that animates a plug-in specific state transitions.

  -Transitions of the plug-in data acquisition (DAQ class) class calls a method of the DAQ class that reads data from an FPGA card OR and transmits to another component via a queue.

  PROBLEM:

  -Higher sampling rate, a FPGA-to-host FIFO overflow occurs after some time. When I "weigh" the system just by moving a window of Firefox browser on the screen, the overflow is triggered immediately. I did not have this kind of problem in older software, where I was also reading a FIFO of FPGA, but made no use of LabVIEW classes or diagrams.

  SOLUTIONS I'VE TRIED (WITHOUT SUCCESS):

  -J' put the transitions in a timed (instead of a simple while loop) loop that I assigned specifically to an own kernel (I have a quad-core processor), while I left all the other loops of my app (there many of them) in any simple loops. FIFO overflow still occurs, however.

  QUESTION:

  -Does anyone have a tip how I could fix this problem? What could be the cause: dynamic distribution methods, the acquisition of data of state transitions or just the fact that I have a large number of loops? However, I cannot change the fact that I have dynamic distribution methods because it is the essence of my architecture...

  Tips are greatly appreciated!

  I've now changed the execution priority of all the screws involved in reading of the FPGA FIFO '(highest) priority critical time '. This seems to be improving the situation much: so far I have not a FIFO overflow, even when I move around the windows on the screen. I hope it stays like that...

• Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Lets say I got a $10 gift card balance and I want to buy something will be only charged debit card 10 cause of $20 s $ of the balance of the gift card?

  Unless it's a gift card or otherwise indicated, the debit card will be charged $10 plus tax on this item.

  (143858)

• My SD card reader and USB 3.0 Hub have left both answer but see the place in the information system. How can I make them work again?

  On my Macbook Pro 13 inch Core I5 2 .6GHz, I just noticed that my SD card reader and USB ports have stopped working. They hub and drive appear in the information of the reporting system. I tried to reset PRAM and SMC but no luck so far and my Time Machine backup is on a SSD in a USB 3.0 hard drive enclosure. Any ideas how to reset the hub and the reader? I'm including all system information in case it is useful

  System information:

  Model name: MacBook Pro

  Model identifier: MacBookPro11, 1

  Processor name: Intel Core i5

  Processor speed: 2.6 GHz

  Number of processors: 1

  Total number of cores: 2

  (By heart) L2 Cache: 256 KB

  L3 Cache: 3 MB

  Memory: 8 GB

  Boot ROM Version: MBP111.0138.B17

  : 2.16f68 SCM Version (system)

  USB:

  USB 3.0 Bus:

  Host Controller Driver: AppleUSBXHCILPT

  PCI Device ID:0x9c31

  PCI revision ID:0 x 0004

  The seller ID:0 x 8086 PCI

  Mass storage device:

  Product ID:0 x 1000

  Provider ID:0 8564 x

  Version: 11 h 00

  Serial number: 45H3PTDPV3XSLHKB

  Speed: up to 5 GB/s

  Manufacturer: JetFlash

  Location ID:0 x 14500000 / 9

  Available current (mA): 1800

  Current (mA): 76

  Additional operating current (mA): 0

  Apple keyboard / Trackpad:

  Product ID:0 x 0259

  ID:0x05ac of the seller (Apple Inc.)

  Version: 2.24

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14400000 / 2

  Available current (mA): 1000

  Current (mA): 40

  Additional operating current (mA): 0

  Built-In: Yes

  BRCM20702 Hub:

  Product ID:0 x 4500

  Name of the vendor ID:0x0a5c (Broadcom Corp.)

  Version: 1.00

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14300000 / 3

  Available current (mA): 1000

  Current (mA): 94

  Additional operating current (mA): 0

  Built-In: Yes

  Host controller USB Bluetooth:

  Product ID:0 x 8289

  ID:0x05ac of the seller (Apple Inc.)

  Version: 1.18

  Speed: up to 12 Mb/s

  Manufacturer: Apple Inc..

  Location ID:0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Built-In: Yes

  Software:

  Presentation of the system software:

  System Version: OS X 10.11.5 (15F34)

  Kernel version: Darwin 15.5.0

  Volume: Macintosh HD to startup

  Boot Mode: Normal

  MacBook Pro name: Stuart computer

  User name: Stuart Berwick

  Ensure the virtual memory: enabled

  Integrity of system protection: enabled

  Since the starting time: 6 minutes

  USB 3.0 Bus:

  Manufacturer: Apple Inc..

  Location ID: 0 x 14330000 / 6

  Available current (mA): 1000

  Current (mA): 0

  Additional operating current (mA): 0

  Integrated: Yes

  Model name: MacBook P

  A simple restart of the machine is reset.

  On the hub to try another cable and a different port if possible.

  The SD is constructed in the?  It can be a bit fussy, Reseat the card with a purpose, repeatedly if necessary so that it can recognize it.

• I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  I just bought an Iphone 6s and not yet am possession of en from the Sim Card. Ook, do you know if I can use the phone including applications via Wifi and put the chip later? Thank you. Renault JL

  No, because if you bought a new iPhone, then you need a SIM card to activate it before you can use the wifi applications.

  This is a phone after all, you don't need a sim card any to be able to activate it.

• NB100 supplied with Bluetooth and the slot for sim card

  I wonder what model come with bluetooth and the slot for sim card,.

  The NB100? Have a look at the brochures on the Toshiba site.

• Vista and Moduslink: error just after the formula of credit card

  Hi and sorry for my English

  I had a problem with the Vista updgrade on this site: http://upgradeweb.moduslink.com/Vista/
  I just read some topic about it here, but it seems that my problem has not been reported. Me too:

  -J' I select my language (french), then choose Vista, then choose "Toshiba" in the list of resellers.
  -So I put the COA of the Windows XP MCE from my Toshiba laptop and purchase date.
  -The following form, I put credit card information and validate, but the site returns an error.

  Since then, I have received no email, no information and no payment has been made.

  I tried a second time, but then I was stuck in the form of COA number, and the site has noticed me the COA number is wrong. But when I used it the first time, he had no problem with my number of COA...

  I tried to send an e-mail to the contact of the site, but no response. What could I do?

  Hello

  Problem is that MODUSLINK is allowed for this update program and not for Toshiba only. If there is a problem, you must contact them. If they do not wait a few days and try to contact them again.

  Sorry, but I don't know what else you can do.

• I bought a new Iphone 5 s of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none that I just

  I bought a new 5s of Iphone of Snapdeal in India, but when I created an account in the App store and next step his asking me to specify the details of credit card and the iTunes gift cards and codes I don't have an option to select none I just an options to select Master card, Visa and Amex. So what should I do to continue without entering a those sections.

  This step must be completed before you can go to the next step in creating an App Store account. It is only for the purpose of verification and just incase accidentally make you an in - app purchase.

  You cannot create an App Store account without card number.

  I hope this helps.

  AppleMan

• I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

  I can't download anything in the App Store, I can not still to update anything without entering my card info and he says "he has a problem of billing with a previous purchase.

  There is something probably wrong with your credit card you enter. Check your previous purchases and know what the problem was. If it does not call apple for more information support. Good luck

• Unable to create a file with "nidll_vxworks" in Matlab for use with the LabVIEW SIT 2010 and a cRio 9073, error sh.exe

  I am trying to compile an OUTPUT for my Simulink model file by using "nidll_vxworks" and execute it using the Simulation Interface Toolkit for a cRIO 9073. I am able to compile the DLL file by using "nidll" and managed to run the simulation using my PC as a host.

  I have already downloaded the files "gccdist" and "vxworks61gccdist" and copied in "c:" when I build the model in Sumulink I get the following error at the end of the process (at the same time windows tells me that "sh.exe" has stopped working). If it's important, I'm on Windows 7 64-bit, but using Matlab 2009 b 32bits and LabView 2010 32-bit. ANY HELP WILL BE APPRECIATED. "QofV" is the name of my Simulink model and I changed to parts of "XXX" in the path of the file.

  6.1 CCG is only supported on Windows XP.  It is almost indicated in the readme_sit_vxworks.txt found in C:\SimulationInterfaceToolkit\xxxx\VxWorks (where xxxx is the version of the DIS).  It is said:

  * Known issues
  
  ---------------------------
  
  -WindRiver GNU Toolchain 6.3 and 6.1 do not work on Windows Vista.

  To be more explicit, it should be "Vista and later.

  Carl L

  National Instruments

• In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed.

  In Labview 8.6 and MAX, I can change a scale for a voltage read the string in a task once the application has been built and installed on a second PC. Where's the info of the scale which is held?

  Hello

  Once you have built your VI and compiled into an executable file and deployed on another machine, it essentially becomes a file read-only, which means that you will not be able to change the balance in this deployed application.

  Kind regards

  Marcus

• Call the function in LabView from a DLL, and then access the global variable of DLL

  I've created a DLL in LabWindows with a function and structure.  I want to call the function from LabView and then access the overall structure.  I am able to call the function in the DLL with a "call library function node" and has access to the return value, but I can't understand how to access the overall structure.  The structure is declared in the header DLL with __declspec (dllimport) struct parameters file.

  Is it possible to access this structure without using the library of network variables?

  My guess is that you need two bytes of padding after "in_out" and another to two bytes of padding after "anin."  The reason being that ints are 4 bytes, and most of them C compilers will align on 4-byte boundaries.  The struct will naturally start to such a limit (in fact, in Windows, it will probably start to an 8 byte boundary).  If you then count bytes in your structure, you are 70 byte after "in_out."  70 is not divisible by 4, so you need 2 bytes more to reach the next 4 byte boundary.  You can also you could reorganize your struct so that "anin" follows "in_out" and this is probably the best option if it won't cause you other problems.

  Unlike most C compilers, LabVIEW compressed structures as closely as possible, without filling.  I don't know enough about the history of LabVIEW and internal parts to explain the reasons and to do this performance penalty, but, as choice of LabVIEW "endianness", it is probably a remnant of the first versions of LabVIEW that were running on the Mac.

  If for some reason you want to force your C struct to match package LabVIEW, you can use the #pragma pack (x) directive, but I wouldn't recommend that here because you can control the C and LabVIEW.

  EDIT: in the cases where it was not clear, add padding to your cluster of LabVIEW, insert appropriate size or items at the place desired in the cluster.