The turbocharger failure?

Similar Questions

• Satellite A30: PXE - E61 media test check the cable failure

  OK got this message on a cell phone of friends
  Others have played with him and made it worse, and now I received the laptop to try and fix.

  When you start to get

  PXE - E61 media test check the cable failure
  PXE - M0F outgoing PXC Rom

  If his tent to boot from the local network instead of the hard drive I have reset bios by default I disabled everything when I F12 boot to hard drive get the error message rΘation and one at a time, that nothing works even when I try to disable lan starts, he tries always to.

  When I try to install from disk backup it is hard disk not found, but in the bios the hard drive is located and can not boot from it.

  I tried with winxp pro disc to try not to get an OS on the laptop any partition to the OS but a blue screen with an error 0 x 00000050 CrashFree disk gives error 1170 if I remember correctly.

  I can't update the bios with new version because she needs windows, I can't stop the lan because there is no setting in the bios very minimul with about 4 useful settings in it.

  Is the hard drive turned or is this a bug in the bios that it detects drive hard, but does not assign a letter properly?

  If I try the recovery console in xp Setup there is no disk to read or write, if I maps the drive in recovery only the cd/dvd rom found no hard drive.

  Any help would be great thank you because I don't know what to do, I don't think that the hard drive is shot myself but maybe if I can get a laptop and try the hard drive what she will say if it is or not, but for now I'm stuck with no. had to go.

  I tried many things
  1. cdrom out and replaced plugs
  2. Jack hard drive out and replaced
  3 took Ram out and replaced
  4. start since the utility disk
  5. start from the winxp disk
  6. Windows XP recovery console no hard disk on c d e f g
  7 disc utility says no hard drive gives me a x: > promt error number 11030 invalid destination by car. Hard disk by bios HITACHI DK23FA-30-(PM)
  9 winxp error if I try to install 0x0000008e

  Post edited by: Shoa

  Post edited by: Shoa

  Hello Shoah

  You did what I would recommend.
  I remember what one of my friends has had a similar problem on an A200. But after the BIOS reset by default, he was able to install the OS from the recovery CD.

  The whole is very mysterious. It looks like a HARD disk failure, but the HARD drive is recognized in the BIOS. But have you checked the HARD disk in other laptop or computer?
  You can try to connect the HARD disk via the external USB HDD controller and could check if it s ok and could format.

  I recommend also to remove the CD/DVD drive and the HARD drive, then set the BIOS to default settings immediately (don't forget to save changes). Then try to power upward without the HARD disc and the drive.
  To my knowledge, you should get an error message.
  Then stop the laptop and put both the device in Notepad. Then go to BIOS and check if both devices are properly recognized.

  Finally, I must say that I don't know if my proposal will help m.
  If she won't help, you will need to contact an ASP in your country, because it really looks like a serious problem.

  Good luck

• My cd-rom has dissapeard when parsing it referred to the 39 failure

  My cd-rom has dissapeard when parsing it referred to the 39 failure

  Depending on the operating system, try following the steps under "Windows 7 or Windows Vista" or "Windows XP" in the MS KB article:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• Windows XP does not start error message "Windows Boot failure. Press 'OK' to repair the startup failure.

  I have a PC running windows XP and it seems to be a virus when the computer starts and arrives at the log on screen. Once I log in, the background appears saying 'safe mode' in each corner of the black screen and an error box appears saying "failed to start Windows. Press 'OK' to repair the startup failure. Then, a diagnosis of FAKE windows disk rises and scan the computer. I really need help and all the fixes involve downloading something and I can not even access my desktop please help im not a computer genius! Also I do not know the specs of my PC because I can't go to windows to get them! :'(

  I think that the difficulty with myantispyware site is to know what type of malicious software that you have?

  I have this same problem on a friends laptop - I started out in a PE environment and run a couple of different recovery CD of AV companies but the problem remains. I also tried to go back to using System Restore, but it did not work either.

  On a work computer download SuperAntiSpyware Portable version from the link below save it on a USB key. Take the USB to the infected computer. Start the computer in safe mode with command prompt. Press Ctrl + SHIFT + ESC. The Task Manager opens. Click file > new task > type explorer.exe > press Ok. Navigate to the flash drive > right click > Explorer. Locate the SuperAntiSpyware file > right click and choose Run as administrator.

  I met recently a few new malwares of thugs that are loaded in safe mode effectively preventing you to download or install anything. For reasons unknown to me from the computer in safe mode with command prompt and then run taskmgr explorer.exe prevents malware to load. This method has worked several times for me this week only. Worth.

  Superantispy-portable    < this="" is="" a="" portable="" scanner="" that="" does="" not="" install.="" it="" can="" be="" run="" directly="" from="" the="" thumb="">

• Why do I get the catastrophic failure message when I try to save?

  Why do I get the catastrophic failure message when I try to do a back up?

  Hello

  You don't say how you try to back up or where you save up to.

  And do not make backups on the hard disk recovery Partition

  Backups must be performed either on DVD or external hard drive.

  How to back up your data (this applies to all versions of Vista).

  http://www.wintuts.com/how-to-backup-your-data

  How to restore these data:

  http://www.wintuts.com/how-to-restore-files

  If you have Vista Business, Ultimate or enterprise, you can perform a full backup of the computer:

  http://www.bleepingcomputer.com/tutorials/how-to-use-Vista-complete-PC-Backup/

  How to restore this backup of the computer:

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-complete-PC-Restore/

  See you soon.

• Error when burning a DVD DVD Maker - "impossible to crΘer the cataleptic failure of dvd.

  Original title: Windows DVD maker
  I get the error (failed to create the cataleptic failure of dvd)

  Hello

  I suggest that you try reducing the burn speed in the creation of DVD and check if it works.
  Choose a speed slower burn to your DVD recorder as follows:

  1. return to the page Add images and videos on the DVD and then click onOptions.
  2. in the DVD burning speed box, selectmedium orslow.

  Also, make sure that you save the movie on the computer and try to burn it.
  If the previous step fails, then I suggest that you uninstall any third-party DVD burning software from the computer and check if it works.

  Solve problems with creating a DVD-video using Windows DVD creation
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-creating-a-DVD-video-using-Windows-DVD-Maker

  Change Windows DVD Maker DVD-Video settings:
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Windows-DVD-Maker-DVD-video-settings

  Burn a DVD-video disc:
  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-DVD-video-disc

  
  Kind regards
  Afzal Taher-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Stuck at the screen 'failure of Windows update Setup.

  I have reset my laptop Windows 8 and downloaded the updates required for Windows 8.1. Then I had to reboot my computer and configure updates. Now it is stuck at the screen 'failure of Windows update Setup. He has already restarted once and is back on the same screen. It is an Asus laptop and from what Ive read, this is not exclusive to all laptops Asus. I do not have any disk installation or any way to activate Safe Mode as I have tried (in fact something that requires search or any key entry does not work). I hope you guys can find a soultion, thank you

  EDIT: I think that now it's in a forever continuous reboot, preparation configure updates, failed comfiguring cycle of windows updates.

  Hello

  What is the full error message? An error code is displayed with her?

  Why did you reset the computer? You had problems?

  This problem could be caused due to some incorrect settings or due to a compatibility issue. I suggest you try these steps in the following article and check if the problem persists.

  http://support.Microsoft.com/kb/949358/en-us

  Keep us updated on the results.

• I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  I get the update failure when I try and import plug-ins for Indesign for new DPS, even though I have updated the Application Manager. What can I try next?

  And moved to the DPS forum.

  The classic DPS plugins are not supported in CC2015. You go back to CC2014 for that. Only the new digital publishing Solution will be supported in CC2015.

• Photoshop Elements and the unexpected failure of the system

  Hello!

  I would ask you to reactivate Photoshop Elements 8, after the unexpected failure of the system. For example: my Windows Vista has a Blue Screen of Death, and I have to format partition and reinstall my OS (my material remains unchanged).

  Then install the Photoshop Elements 8 (I bought in the local store), and I'll be able to reactivate my copy of PSE8?

  Thanks for the reply

  Best regards

  Jacek.

  PS.

  Sorry, my English is terrible

  If you have activated only once, then you should be able to reactivate a second time without any problem.

  If you have enabled the two copies, then you will need to contact customer service to obtain your activation reset.

  http://www.Adobe.com/support/service/

• The system failure error 0xc18a0206 for HP Photosmart c6180 all-in-one of the ink...

  Printer has not been used for a few months... Troubleshooting restart did not work... Warranty has expired and I need to print an urgent... Help, please!

  Go here and follow the instructions:

  http://www.CCL-La.com/blog/index.php/HP-Photosmart-ink-system-failure-1

  Worked for me!

  {deleted content}

  -pojjl

• Pavilion dv6-6b54sl: ID of the laptop failure

  Hello, I have a laptop HP Pavilion dv6-6b54sl, product number: A6P10EA #ABZ.   OS = Windows 7 64 bit.

  My question is: laptop stops working, more than 1 time. Reboot the system, then it seems normal.

  I just restored original configuration. But not resolved.

  So I did the HP diagnostic test: test running and break-in failed.

  Starting test report:

  Memory test passed; =

  Smart check = passed;

  Short-DST = failure;

  Failure ID = mc0c6w-5rt7g2-qfph4k-60xh03

  Could someone explain to me?

  Hello

  Yes, hard drives, I linked in my previous post works perfectly - you are not limited in any way that the manufacturer of the drive.

  Kind regards

  DP - K

• Cannot open the terminal failures of the file 'C\:HP\DATA\HP. DAT' to read.

  I've just updated my bios on my HP Pavilion g6-2102au Notebook PC.

  I had continuous multi color screens, thought it was overheating but not so much.

  I installed the latest version of the bios and it seems to have worked? having had a twinkle while writing

  This.

  My query is to start up when he started I get this message and I said OK

  Terminal Failute cannot open the file 'C\:HP\DATA\HPLB. DAT' to read.

  This is the message that someone help me get rid of it

  See you soon

  shiner2348

  Hi @shiner2348,

  Thank you for your inquiry.

  I understand that you receive the error message "Terminal failure cannot open the file"C\:HP\DATA\HPLB. " DAT' to read '.

  This is a reference to the launch of HP software box.    I suggest to uninstall and then restart your laptop.

  If you want to keep this app I suggest that you try to download it and install it using compatibility mode.

  Here are links to help you in this process:

  Compatibility mode

  HP launch box Windows 8

  Please let me know the results.

  
  

  Thank you for your participation in the Forums of HP! We want to help you as well as others who may encounter a similar problem as you. Please consider tagging the post in order to solve your problem as "accept as Solution" to help other members of the community!

  To show recognition for my efforts please click the Thumbs Up below.

• passed the test after the step failure

  Hello

  I have a stage with test of numerical limit.

  I checked in properties, under run Options, step failure causes the sequence

  But when I washed up on the market, the result of the test is passed.

  When I change the Actions Post - on is not going to the next step Goto cleanup

  then the result of the test is failed.

  I have two other stations where I limited digital test with the same properties, but here I don't have to go to cleanup for a failure result.

  I use TestStand 2013.

  Please help me, thanks

  / Magnus

  Magnus,

  Instead of setting RunState.SequenceFailed in your Expression after, try setting Step.Result.Status to this value instead. It worked on my machine.

  I hope that helps!

• My Outlook Express is not send my emails or have the recoil of the false failure error messages... Who can help me?

  Spent many hours on the phone with technical support of at & t reset my email ID and password.  My mail to yahoo at & t sending and reception, but the same message generates a Mailer Daemon failure notice when sent from Outlook Express for XP. at & t said that there is a Microsoft bug that they cannot solve. Who can help me to solve this problem that just started last night after years of functioning? Please contact me at * address email is removed from the privacy *. Thank you.

  Why always a message in Oulook Express that the recipient of this message is not digitally signed, and then another one saying unencrypted and I click send anyway. How can I remove all this and just be able to send directly to who I want? When Outlook is genrating and alert error there are no detaisl provided on the error.

  Start over.  First eliminate interference antivirus (see www.oehelp.com/OETips.aspx#3).  After that go to file | Identities and editing and new identity.  Set up your e-mail account to the$ T, and then use the settings they specify on their website for OE and also told you to support.  (OE can connect and send to THE$ T, there is therefore no clear 'bug' with OE towards them).  See if it works then.

  Steve

• A SMART Test the disk failure

  Computer does not start load Windows normally. During the diagnosis, I received the following message is displayed:

  ERROR CODE: BIOHD - 7

  Error: A SMART Disk test failure

  Tests: st3750528as (9up2y6fc)

  This means that my hard drive is defective or is it a software problem?  Make a recovery disk will help?

  TangoK, welcome to the forum.

  This error message means that your hard drive has failed.  If you can begin, should make a backup of your personal data.  You need to replace the drive by a large or larger for system recovery media work.

  For future use, when the application for aid, you must always include the make and model (e.g., p6-xxxx) of the computer or the monitor. This information is necessary for us to review the specifications for them.  We would be able to provide you with guides to help you to restore the system after the drive is replaced.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.