The U2412M will operate using a HDMI cable to DVI?

Similar Questions

• How can I get sound on the Windows XP computer with an HDMI instead of DVi cable?

  How can I get the sound on the Windows XP computer using an HDMI instead of DVI cable - my monitor accepts cables but

  I don't know how to make it work with the HDMI - help interface? Thank you!

  The question is not what operating system you have (a version of XP), but if your video card has an HDMI output.

  See http://www.bhphotovideo.com/indepth/computers/tips-solutions/how-connect-pc-hdmi-tv

  If you need specific advice on your computer, follow these steps:

  • Open system information (start > run > msinfo32.exe > OK)
  • Click in the system information window and select all (CTRL + A) and copy (CTRL + C)
  • Paste (CTRL + V) into your answer here
  • Return to system information and click on the + sign next to "Components" and then click "display".
  • Select all (CTRL + A) and then copy (CTRL + C)
  • Paste (CTRL + V) into your response at the end of the previous data

• I currently use an HDMI cable to connect my laptop to my TV for streaming video. Anyway is to close the Mac but still flow from it? Right now it just runs in "standby mode", and the connection is lost.

  Hi all

  I currently use a HDMI cable to the video stream from my MacBook to my TV. It works fine except that it doesn't seem to be a way to close the laptop and always maintain the connection with the TV. First of all, I do not leave my laptop open, exposed if you want, when you're arms reach. Then, when it is connected to the TV, it is at least 2 to 3 yards away. In addition, I have recently adopted a cat. His favorite thing to do is to tap dance across the keyboard. Therefore, I am more able to let the laptop taken in isolation within the connective range of HDMI cable because the cat will walk on it. In any case, I tried to find a way to close the lid of the laptop, the laptop to stay awake and keep the connection to the TV. Any ideas?

  Thank you

  Sally

  See if there is a solution:

  https://support.Apple.com/en-us/HT201834

  Ciao.

• I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  I need help to connect my macbook pro to my TV high definition. I just installed the latest update for el capitan, and now all of a sudden not work there.  I use a hdmi cable that has worked for me before.  Any suggestions?

  OS X El Capitan: use your TV as a monitor

• Satellite L650 - no sound on the TV using an HDMI cable

  using a HDMI to connect to the TV picture cable works fine but no sound through the TV, sound out of speakers to computer. How can I configure so sound comes through the TV?

  Hello

  Usually it should automatically work but try it please check the settings in the sound properties > reading.
  Switch off the speakers and turn on the digital audio device (HDMI).

• No sound from the TV using a HDMI cable not connected to the laptop ASUS G75VW.

  I have an ASUS G75VW, when I connect the HDMI to my TV, I get only audio through my computer laptop speakers or headphones, while it is plugged.  In addition, the TV picture is only 480 p.  When I check the sound icon, it shows that the HDMI port is "not connected" even though it is.  I tried to uninstall and reinstall the driver on both the NVIDIA site and the site of ASUS.  Same question.  Help, please!

  Hello

  Make sure that it has the TV volume.

  You can also make sure that the connections are appropriate. Try to connect to another HDMI port as well.

  Refer to the section: "Check if the cables are connected correctly" and set the HDMI audio device as the default value.

  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab2&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  I also suggest you to consult the steps mentioned by "Karthik Vengaloor responded on 14 January 2013" and perform useful methods.

  Reference:

  Windows 8 audio via hdmi on desktop cable

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-pictures/Windows-8-audio-through-a-HDMI-cable-on-desktop/79aaa786-8311-4FA2-8206-0e57b8861baf

  Hope this information helps. Response with status so that we can help you.

• Satellite C55D - no sound on the TV using an HDMI cable.

  Hello

  When I connect my laptop via hdmi cable to the TV digital sound is heard through the speakers, but not on TV.
  It worked well before, not now.
  Everything is connected, I tested with new cables. It is set up.
  Devices, it seems that none connected.

  Help, please?

  Try to activate sound output manually in the sound properties. What entries you can see in the devices section of reading?

  

• HP Envy 360: Boot Device no error found - when you use a HDMI cable only

  Boot Device not found error - when I connect an HDMI cable to my Dell monitor. (I do with this laptop in my another desktop and it works very well).

  "Please install an operating system on your hard drive."

  F2 for HDD diagnosis (3F0)

  Go to hp.com/go/techcenter/pcdiags

  As soon as I disconnect the HDMI and reboot everything is big again.

  I tried with 2 HDMI cables of different (one that works very well in my office and my HP Monitor).

  I really need to use a large monitor when you work... any suggestions?  Thank you! -kelly

  Welcome to the HP forums! It's a great way to engage, ask questions and find resolutions by working with specialists from the community of HP. I understand that the computer throws to a not found error message boot device when it is plugged into an external monitor via HDMI. It will be a privilege to help you.

  A remarkable work was done by an extensive troubleshooting before asking the question in the forums of HP. It's always a great pleasure to work with tech-savvy and technically customers sounds like you. Kudos to you for this. I am amazed at your technical skills and the value certainly your relationship with HP. We greatly appreciate you for doing business with HP and consider a privilege to share this platform with you.

  Please perform a hard reset to see if the computer goes off and changes things. Steps to follow:

  • Turn off the computer and unplug the charger. Then remove the battery only if it is removable.
  • Press and hold the power button on the unit for 15 seconds to carry out the static electrical charges inside the machine.
  • Replace the battery and the charger plug it back. Try to turn on the computer.
  • Please perform a default bios also.

  Please check in the bios if the bios can be extended to this monitor via a cable HDMI to work.

  If please check on another screen as one TV (not another monitor) with the computer for windows startup and the cable connected to the TV HDMI to further isolate the issue.

  Please update the bios, the chipset and drivers of this link http://hp.com/drivers graphics cards

  Please visit these links for assistance: http://support.hp.com/us-en/product/HP-Spectre-XT-15-Ultrabook/5296019/model/5333249/document/c01186408/

  Link 2 http://support.hp.com/in-en/document/c01443463

  Run the system diagnostics without the connected HDMi cable, that if you don't have not done from the above link 2. You can ignore the link 2 If this was done without the connected monitor.

  I really hope that the problem is solved without hassle and things work fine. I hope this helps. Please let me know how it works.

  Just to say thank youPlease click the ' Thumbs Up ' button to give a Kudos to appreciate my efforts to help me. If it helps, Please mark this "accepted Solution".

  Now carefully and have a wonderful week ahead.

• Smaller with the 2511 X HP monitor screen HDMI cable?

  Hi people, I have a desktop HP p6230f, Windows 7 64-bit o/s and a GPU ATI Radeon HD 5770. I had no problem with it until last night. Finally, I changed my DVI cable connecting the monitor to the computer during an HDMI cable.

  I have a picture of a 1 "wide black on three of the four sides of the screen! For example; If I drag an icon on my desktop or one of the items in my sidebar to the outer edges of the screen, they begin to disappear behind a blackened by the section of the frame of the screen about 1 "of the actual plastic mount that make up the structure of the entire screen!

  Now that 1 "size approximate but the width of the glass of the monitor is 21 3/4 but I can get about 20" of the real, usable, the screen display and 12 1/4 inches monitor glass vertically measured I can get about 11 1/8 inches of usable display! This means that I get less of 23 "usable display when measured diagonally.

  I already checked the monitor to the HDMI settings and I don't see nothing wrong in the settings of Windows 7. I'm about to reinstall the driver for the monitor, but I seriously doubt that will work.

  Also, I noticed that all my fonts and size of my desktop icons are smaller than they were before the change. I know how to enlarge them all but the problem is that they seem to keep back to the small size when I shut down the computer and start it back up.

  Now, it is possible that the problem is not related to the HDMI cord and I'm only note this 1 "black frame on each side and the top of my screen for other reasons unrelated to the monitor HDMI cable.

  So yes, I'll reinstall the DVI cable and see if that makes a difference, but even if it does, my question is; Why this would happen when connected to the HDMI cord, (I will also check the drivers of the HD 5770)

  Thank you

  HAH! It wasn't my imagination! Just when I was about to throw in the towel and admit that I was imagining all this and he went even to pull demand for assistance on the site I found the problem.

  For those who can run in this one day in the future, the resolution is in the "AMD Vision Engine Control Center" . I had lost my settings because I got an error of starting due to my inability to follow directions on a USB HUB, I added to the system last night*.

  On the left of this Panel of the user is a number of adjustments, you can do on a good many things involving graphs including the monitor you are using. Just click on the box entitled 'My digital flat screens' and Tin the drop-down list, click on "Options of scaling (Digital Flat Panel).

  You will see a slider that lets you adjust the scale yourself, or you can put a check in the box and have done automatically. If you use the cursor like I did, drag it over to the full adjustment right up to '0% overscan. As you do that you will see on the screen grow to fill the entire display window, (every 25 inches diagonal of it).

  That's all! Click "Apply" and you're done. This issue is resolved.

  ** (that's another story, but the short of it is that you do not want to add devices to the HUB USB FRONT that the new hub will load its drivers!).

• Re: No sound using a HDMI cable

  Hi, first sorry for my English, but I m French

  So my problem is that when I connect to my pc to my TV with HDMI Cable I put t get the sound than the screen
  Please help me with my problem.

  Can you please tell us which laptop model you have and what operating system are you using?

  Anyway, click with the right button of the mouse on the speaker symbol in the taskbar and choose playback devices option. Is it classified HDMI device? If so try pleaser to choose the option set as default device. You hear the sound of the TV?

• HP 2509 m screen flashes and turns off using a HDMI Cable entry

  I have problems with my new HP2509m monitor. When I connect to my cable box using the HDMI connection the screen image flashes for a few seconds and then goes black for a few seconds and continues to do so. The time interval varies from May 3 to 6 seconds in each phase.

  It's the second monitor I got that this behavior. When I bought my system in October I ordered the 23 "monitor and it worked fine with the HDMI input, but I had trouble with the PC and he traded. The 2509 was introduced at the same time so I decided to share my monitor 23 "to 25", but now I'm regretting this decision. The main reason I bought the extra monitor should have the opportunity to move to the HDMI input for TV viewing, save space in my office.

  I tried the monitor using the same HDMI cable plug into the HDMI from my computer and the light is very good, so it seems to be a problem with the signal from the cable, but everything worked with the 23 "monitor leaving I think there is an issue with tuner HDMI monitor 2509.

  I searched the documentation on the HP site and google search but have found nothing of the sort. Someone has seen this and is there a solution for this? I like to keep the monitor. Thank you.

  Message edited by JudgeLeo on 03/12/2009 20:00
  Message edited by JudgeLeo on 03/12/2009 20:03
  Message edited by JudgeLeo on 03/12/2009 20:03

  Apparently, I was early to the part of the questions of this monitor.

  It turns out that the monitor is not compatible with the decoder I've had. The box is made by the Asian Development Bank and is capable of displaying 1080I content. 1080I is not the issue but because I can use a HDMI to DVI adapter and connect to the monitor and it works OK; It is, so I don't have the computer plugged into the DVI connector as I wanted.

  My cable provider was kind enough to take the monitor and test. They discovered that one of their old version of (amino) cable boxes works very well with the monitor. They swapped the box and it worked well since.

  I use my cable provider HDMI cable, so I don't know the spec version that is.

  My advice to anyone affected by the flashing HDMI display is to get a HDMI/DVI adapter and try it. They are supplied with a certain monitors so that they are fairly easy to find if you know someone who works in a computer SCIENCE Department. If the monitor displays the signal correctly then the question is probably the cable box or as another poster suggested, the cable can be out of spec.

  It is convenient to have the double monitor as a TV. The image quality is superb, but the sound is not. I do not understand why manufacturers monitor for skimping on the speakers. A monitor with its 'premium quality' would be a point of sale, and buyers would be happy to pay for the upgrade. I don't know about a lot of people like me it's simplify - remove the clutter and cables of our offices. HP are you listening?

• Trying to connect my laptop to an HDTV using an HDMI cable. Error I get is "signal".

  I use window Vista on my laptop. I'm trying to connect my laptop to my HDTV. I connected the two with a HDMI cable. The error I get on the TV screen is 'signal '. Is there some settings that need to be changed?

  All imput would be appreciated.

  Kite_99

  http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

  http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

  http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  Read the info on the links above.

  See if that solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• His crackling/lag all the seconds when you use Virtual Audio Cable / Line in on my HDTV

  I recently discovered that I can use Virtual Audio Cable to play a sound through linein windows, so able to use the MilkDrop visualizer on my HD TV connected via hdmi on my pc. But the audio crackles/lag every few seconds. I had to work yesterday, I don't know if she was then, but I don't think that this was the case. What would be the cause of this/how can it be fixed?

  Hey Kevin,

  You must contact the support of virtual Audio cable for better assistance.

  http://software.muzychenko.NET/Eng/VAC.htm#support

  Good day!

• Audio problem when using an HDMI cable

  I have a 2000 HP and from time to time when I connect my comp. to cable HDMI the sound only works on the computer

  not the TV and then I have problems with the sound when you play videos on the computer alone or with headphones. I have also

  getting a Web page saying that something is null and then says error message line 1530 and I have to restart for

  Let the error message.  I checked all of the updates for audio.

  Thank you for visiting the Forums HP's Support and welcome. I have read your thread on your laptop HP 2000 and don't read does not correctly when it is attached to the TV. Only, you should be able to have the HDMI cable from the computer to your TV and try to touch the key FN and F4 for transferring the image of the computer to the TV while the HDMI cable is connected. Here's a document on solving audio problems with external speakers, headphone and HDMI audio devices.

  I hope this helps.

  Thank you

• Cannot hear the sound of the TV after connecting via a HDMI cable

  Original title: sound on tv

  I was able to hook the hdmi cable to the computer laptop & tv and watch movies on tv. Now, for some reason I can't hear the sound on the tv more, the sound from the laptop only.  How can I fix?

  Hello Monica,.

  -What operating system is installed on the computer?

  If you have installed Windows 7, you can read these articles and check if that helps.

  Connect your computer to a TV: http://windows.microsoft.com/en-us/windows7/connect-your-computer-to-a-tv

  Sound cards: frequently asked questions: http://windows.microsoft.com/en-us/windows7/sound-cards-frequently-asked-questions

  Thank you.