THE UNIT TRANSMITS NO CALLER ID INFORMATION. DURING THE CALL MANAGEMENT

Similar Questions

• Recommended method to configure the unit to reject calls to himself

  What is the recommended / best for the configuration of the unit to refuse or remove calls to itself?

  A situation like a TRAP to call on a phone that has the value CFA VMail.

  Thank you

  Vance

  By default, the unit will try to match the incoming calls caller ID to post numbers that you entered for each port in UTIM. Unfortunately, only the caller ID is not reliable. For example, if the unit transfers a call through a trunk or line of JUNCTION and the call is transferred to the unit, we expect to see the port of transfer as caller ID incoming. In this case, we don't want to dismiss the appeal. To handle this, the unit will only reject calls that have caller ID corresponding to a dedicated outdial port (which is a port that is not configured to answer and therefore to transfer calls). So to take full advantage of this feature, you'll want to first configure the outbound ports dedicated for Notification calls, traps and MWI. Then you'll want to make sure that these ports have post numbers entered for them the UTIM. Details of this implementation can be found in CSCdu64641.

  Of course there are always cases where the method above is insufficient. For example, if a call from notification of the unit died in a cell phone that is passed to the caller ID unit original (extension of the unit) may not appear when the transmitted call. In order to take account of cases like this, a new tone-detect basic functionality has been added to 4.0 (4). See the setting "Reject sent Notification DTMF Tone" in the Advanced Settings tool. Unfortunately, this will help with the Notification calls only. Trap the calls that you mentioned won't be affected.

  Hope this helps,

  Eric

• The value of path as unit target in the calculation Manager

  Hello

  is there a way to define a course of treatment as unit target in the calculation Manager? I have data with unspecified units (for example, deg_Cel ° C) then I disabled the calculation of the amount in function. Now I want the result channel have the same unit as the first input channel (something like @@ChnUnit (N) @).

  Best regards

  Martin

  Hi Martin,

  You can launch the Manager of calculation without management unit (turn based on the amount off the coast).  You can set the property unit of the resulting string with ChnDim() to be of the same unit as the starting channel.  I guess you do all that with a VBScript.  You actually run the Manager calculation by hand with the mouse?

  You can add as many lines of VBScript code that you want at the end of the normal equation.  Here is an example of calculation which comes with tiara:

  P = n * (2 * Pi / 60) * M * (1 / 1000)

  If you click the button, you can add the following line of VBScript call second to run the equation:

  Calculate the call ("P = n * (2 * Pi/60) * M * (1 / 1000)", CurrSymbols, CurrValues, "kW")
  
  ChnDim (P) = ChnDim (n)

  Brad Turpin

  Tiara Product Support Engineer

  National Instruments

• the call firefox.exe - ProfileManager does NOT open the Profile Manager does NOT create a new profile, KILLS the old session tabs, but all pinned!

  FF 7.0.1 on Win7 pro 64

  A behavior more bug / odd:
  calling "firefox.exe - ProfileManager".
  -do NOT open the Profile Manager,
  -does NOT create a new profile,
  -seems to do NOTHING (no change around records profile etc.).
  but...
  -KILLS tabs former session.
  -KILLS old session and leaves nothing to restore,
  -KILL all my pinned tabs!

  OK, I should downgrade to FF4.0.1, or same 3.6.x?
  These releases are much more reliable than 6 + 7 running!

  Try using this:
  
  Firefox.exe Pei

• The Task Manager shows only the connection information of network with no menu - how to fix?

  I when I try to open the task manager of the only information that appears is the news of network connections.  There is no menu, and when I right click the only option is to close.

  Looks like you run the Task Manager using tiny/small footprint.

  If you double-click on the empty space around the border of the screen of the Task Manager, it will change from normal mode, and then you should see the tabs you are accustomed to seeing.

  You can read about it here:
  http://www.BROADBANDreports.com/FAQ/6905

• Phone to the Call Manager express license

  Dear,

  Is the license of phone required for Call manager express or the license on the bridge of voice enough to operate the phones?

  Kind regards

  A device license is required for phones on CME. Reference numbers

  FL-CME-SRST-5 =.

  FL-CME-SRST-25 =.

  FL-CME-SRST-100 =.

  Aerts.

• [HELP] How to open a file / call the file manager to open a txt file

  Hello. I saw nothing in the docs how to proceed. I want my application to call the file manager to open a txt file. Or any file I want. How is that possible? Please, I beg you.

  Thank you. But also, it does not solve my problem.

  I solved it with that.

  Application of InvokeRequest;
  request.setTarget ("sys.installhandlerui");
  request.setAction ("bb.action.VIEW");
  request.setUri ("WAY OF THE APK FILE");
  invokeManager-> invoke (request);

  I wanted to open an APK file to install it. I discovered that the target for the installer of the APK is sys.installhandlerui

• BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

  During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

  Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

  I'm not an irritable person, so any help would be appreciated.

  Thank you!!!

  Never disconnect during an update. Never.

  This is therefore a new phone, follow the instructions below.

  First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• What is the procedure of upgrading since version 7.1 of CUCM (MCS Server) call manager to version 10.2 of CUCM (on the server of the UCS)

  Hello

  What is the procedure to upgrade the call manager since version 7.1 of CUCM (MCS Server) to version 10.2 of CUCM (on the server of the UCS), please let me know the steps to what would be the backup procedures and upgrades.

  Concerning

  Gerard

  I suggest reading this guide to make sure that you have prepared your environment to support the first 10.x. The link below also contains the path to upgrade to 10.0 (1).

  One of the ways to do this is:

  1 / apply cooling cop upgrade file on all servers in the cluster.

  2 / upgrade the cluster to 8.6 (2). Make a backup of the cluster.

  3 / build a cluster of servers 8.6 (2) on the virtual machines and assign them the same host name and the IP address of the cluster hardware. (You may need to keep these on a separate network until turn off hardware machines)

  4 / restoration of the backup of the pile of material on the VM cluster.

  5 / upgrade cluster VM to 10.0 (1).

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/upgrade/10_0_1/C...

• Windows 7 allows the application of compaction in the memory manager. If yes where can I find more information.

  Windows 7 allows the application of compaction in the memory manager.  If yes where can I find more information.

  Thank you

  Memory management is controlled automatically by Windows.  Do a search in Help and Support for compaction gives no results, so I think that the answer is no.  It is usually a good idea to reboot at least once a week to clean fragments that might be lingering around.  There is a defragmentation of your hard drive that you can schedule or manually run.

  Good luck.

• information about the performance of the Rules Manager

  I am very interested in this product... and yet, I also find little information on the performance of the oracle community.
  
  the absolute silence on this product with the usual oracle experts is also a bit suspect.
  
  I'm sure that there is degradation in performance related to flexibility gains that the tool provides... but what are the costs of performance?
  
  In addition, there is a "rule Manager utility" announced here... but where you acquire it?
  
  http://www.Oracle.com/technetwork/database/index-088908.html

  Hello

  I was also interested in this support for the rules of the DB, but I was disappointed to read the news of its demise and the suggestion to buy another product:

  Notice of obsolescence: Manager of rules and Expression filter features database Oracle [ID 1244535.1]
  "The Rules Manager and Expression of data filter Oracle's are removed in the next major version of database Oracle." Support is not available for the life of Oracle Database Release11g Release 2.
  (...)
  Visitors should not start new projects with policy Manager or the Filter Expression. All current user Rules Manager should consider migration to Oracle Business Rules, a component of Oracle Fusion Middleware. "

• in the Task Manager, processes is called xxfirefox.exe is - this legitimate?

  Upgrade to Firefox 9, when I look in the Task Manager, the name is XXFIREFOX.exe. Firefox has been hijacked or is the new name for the v4?

  The main Firefox process is always named firefox.exe in Windows 32-bit operating systems.

  I would be very suspicious of a process named XXFIREFOX.exe. My advice is to run a full scan with your anti-virus software, and who does not find a problem if doing a "search > for files and folders" for this executable.

• WiFi drivers not detected in well device during the installation manager

  I use hp 431. I want to install atheros wlan drivers from the hp site, but after the installation, I can't see them in the Device Manager! which means that my computer is not all wifi drivers installed, although I have downloaded and run. Also in the device under other devices Manager, network controller is to have a yellow sign. whenever I try to update, drivers are not found automatically.

  the hardware for network controller ID is:

  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C & REV_01

  PCI\VEN_168C & DEV_002B & SUBSYS_1461103C

  PCI\VEN_168C & DEV_002B & CC_028000

  PCI\VEN_168C & DEV_002B & CC_0280

  I am unable to use the wifi...

  Help, please...

  Hello:

  Please see if this new Atheros driver installs for you.

  http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=5086745&prodNameId=5086746&swEnvOID=4059&swLang=13&taskId=135&swItem=ob-108905-1&mode=3

• After November, 2015 release, in the presets Manager pane, in the overview thumbnails, there is no quick tip information that appears.

  After November, 2015 version, I noticed that, while in the pane Manager settings predefined, there is no pop up tip info, by placing the cursor on my thumb nails.  This has been deleted?  I searched in virtue of what is new and the list changes and did not see that anything that is mentioned.  Is this a bug?  He used to work before they did this last update.  Any help would be appreciated.

  I will state is not fast for you. You seem to have to wait for still to pop up tip.  Once you wait long enough to appear another seem to pop up faster.

  

• Issue of call manager

  We have a Manager call we use for AA to provide wishes and staff of mailbox access mailbox option and no DDI extension before you send us the receptionist (Call Manager driver Point to the monitoring console). Greeting for office hours and the other for off hours which takes messages.

  We had a request to remove greeting during the hours of office, so the rings call the pilot immediately Point, but always need wishes and message opting for hours.

  I have change the standard greeting of the current record to empty and the option after the salutation is to attempt to transfer to Pilot Point. This kind of work, but I get the system prompt to 'wait while I transfer your call', then a second or two from the Department of health before the Pilot Point rings.

  Any way I can stop the system prompt and the Ministry of health before the transfer so that the caller hears only ringtone? Here's how incoming call:

  RTC Via GW-> CTI Route Point-> Unit-> CM Point of pilot-> Attendant Console user

  TIA

  D

  Check out this thread for more information on how to replace the system with a white prompt we so used to hear you it any longer:

  http://forums.Cisco.com/eForum/servlet/NetProf?page=NetProf&type=bookmarks&CommCmd=MB%3Fcmd%3Dpass_through%26location%3Doutline%40%5E1%40.ee8253b/1#selected_message

  do not forget that it is not taken in charge of TAC, and the change will be deleted when you upgrade so you don't have to remember to reapply after.

  Not that you can do on the Department of HEALTH it - it is paid by the switch, not the unit.