The update of the firmware bricked just my time capsule.

Similar Questions

• I have the network wireless with an extreme airport using my base station that dessert 4 Airport expresses. I want to replace the base station with a time capsule from apple.  Are there specific instructions other that connect the new time capsule

  I have a wired to the internet using my base station for 4 expresses the hard extreme airport.  I want to replace the base station with a time capsule.

  It is also easy to replace the existing base station and adding the name of the network and the password?

  You should be able to transfer your configuration of your current access point to new, and then you would just set up the internal drive, try to look at these articles:

  ith-new http://www.TechRepublic.com/article/apples-Airport-extreme-out-with-the-old-in-w.

  -one-airport-extreme-or-time-capsule-to-http://www.iclarified.com/31189/How-to-Transfer-Your-configuration-settings-fromanother

• With the help of Apple's Time Capsule with Lightroom

  Hi, I just bought Time Capsule thinking that all my photos may be wireless sync or searchable using Lightroom. However, when I tried to open the catalog in Lightroom on Time Capsule, it is said that he can not use network drive! WHAT A BUMMER!  I always hope that there should be another way so that I could use my Time Capsule in Lightroom and do my usual regular fabrics, manage my photos and editing wireless (if it's going to be slow, is very WELL!)

  Please advice if someone has an idea to solve this problem...

  Thank you!!

  You can have all your photos on the Time Capsule disk, but the catalog must be on another internal drive or external.

• Impossible to extend the existing wi - fi with time capsule airport

  Hello

  I have one Capsule of airport TB 2 hung on an Ethernet in my study (lower level).

  I already have an existing wi - fi network to ISP modem/router to my media box provided at the top level.

  In addition, I have an Extender provided by the ISP of lower level.

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  I tried several times to do so, but either it freezes up or creates its own network despite the

  mode bridge as stated in Airport utility.

  Guide gently with the method or Protocol correct to put that in place.

  Thank you

  Jay

  I would try to expand the scope of the wi - fi with my time capsule without creating an additional network.

  It sounds like you may try to extend the network of your "main" router wireless

  The time Capsule will not be able to extend wireless network if your 'main' router is also an Apple AirPort base station.  Or... in other words if your 'main' router is not an Apple product, then the time Capsule will not be able to extend wireless network.

  So, the first question to ask here would be... What is the number of brand and model of your router "main"?

  If you intend to leave the time Capsule connected to your main router with an Ethernet connection, the Capsule must have the maximum value of "create a wireless network.  If you use the same wireless network name and password using your 'main' router, Time Capsule will provide additional wireless coverage in the area where it is located.

• My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  My speed has decreased between the router and the modem is not working properly, what can I do to increase the download speed with my Time Capsule 802.11n

  A variety of phenomena can affect the performance of its wireless network. You may be able to mitigate some negative effects.

  Solutions to any factors that may have an impact on your wireless network, read use the Diagnostics wireless for you help to solve the problems of Wi-Fi on your Mac - Apple Support.

• 1102w does not connect correctly to the Airport Extreme Base station (Time Capsule) (wireless)

  & #3; I've been troubleshooting all day on this problem for my parents, trying to set up printing wireless for them on their new HP 1102W. I am trying to connect the printer wireless to their Airport Time Capsule base station. Using the WPS configuration, the printer is recognized by the base station, but I'm still not able to print wirelessly or via airprint. Enter the web configuration via USB, I see that the printer is grateful the network, but it doesn't have an IP address (it is set to auto/DHCP). Later I tried to connect to a shared of my iphone, wifi connection and everything worked perfectly, so the problem is that somehow the printer will not connect properly to the Airport base station. I tried several resets and restarts the printer and the base station, and the printer and the base of the station has new firmware. I also tried to change the security on the terminal of the default wpa2 personal wireless with wpa/wpa2 personal.

  I'd appreciate comments on this issue because I am quite frustrated now :-)

  Using the tool of the airport, I logged on to the base station and changed the wifi settings, while 2.4 and 5 ghz networks have different names instead of identical names standard. That did the trick, eventually I just configured the printer using wps in a few minutes.
  
  Thanks for your help.

• Cannot move the files, photos at airport Time Capsule

  Hello

  I want to transfer files, photos of my Time Capsule but I don't see anywhere on my macbook. I think that something I messed up when I was put in place at the time of Christmas trees. I'll start from the beginning. Before I bought my time capsule I was connected to the internet through my wireless router, name: GMZ-83313. After that I bought my Time Capsule I set up and connected to the internet. Problem is that I have 2 networks who I can connect it is: GMZ - 83313 and Daniel Wi - Fi network (finally...) I have three really because I started to play with it more and I have network of Wi - Fi for the 3rd networkDaniel 5 GHz ;(

  I just want to add that yesterday I was able to transfer photos from my time capsule and it showed here where you can see GMZ-83313. Yesterday, it was Ant Time Capsule of Daniel it was working fine.

  

  I'm lost please help. I have attached a shot of my airport utility screen:

  

  Click gmz-83313 under the Shared heading in the Finder window

  A folder that represents the Time Capsule... hard drive that is named 'Data', unless you have changed the name... appears in the window on the right

  Double click on data to open the player and install it on the desktop computer

  You can drag and drop the files to the disc on the desktop icon or the open window

• Anyone having problems with the modem from Cox and Time Capsule

  Hello

  Lately my internet falls down every day or every two days with Cox. I have reset the modem, the time capsule, the routers extreme apple, etc. shut down and restart my whole network. I called Cox every two days to refresh the modem.

  I heard that I may need to reconfigure my Time Capsule (acts as a router) to avoid this problem.

  No one knows what to do here?

  Thank you

  Please, try the following:

  Open the AirPort on your Mac utility (Finder > Applications > utilities > AirPort Utility)

  Click on the image of the time Capsule

  Click on edit in the window that appears

  Click on the Internet tab at the top of the next window

  Click the Internet Options button at the bottom of the window

  Make sure that the IPv6 configuration is set to Local link only

  Click on save, if you make changes, then click Update at the bottom right of the window

  When Cox fully implements IPv6 (they are not), you may be able to return to the automatic configuration.

• How to restore all the data stored on my Time Capsule airport to my new iPAD Pro

  I have a Macbook air with a backup at a time Capsule from the airport.  The MacBook Air is dead (blue screen).  Now, I have a new iPad Pro and want to restore all the photos that have been saved on the Time Capsule airport to my iPad.  How can I do this?

  Connect the iPad Pro to your computer and sync photos to the iPad Pro.

• can I use airport express to extend the range of my Airport time capsule

  I want my airport express (model 1382) to be subordinated to the time capsule (ver. 7.7.3) and I'm on a different network. Is this possible?

  Do not know what you mean by 'subordinate' here... and you do not specify if the AirPort Express terminal connects to the Capsule using a permanent, wired Ethernet cables... or... If you want to try to have the AirPort Express to connect wireless to the time Capsule.

  The method cable would be far superior to the method wireless in terms of performance and 'slide' on the Time Capsule wireless.

  You also did not indicate what device... a Mac, an iPhone / iPad, etc that you want to use to configure the AirPort Express Terminal.

  So, when we have more information, we can provide you with an accurate answer to your question.

• With the help of WRT160N with Time Capsule

  Hello!

  I recently put in place the router on my existing network that uses Apple's Time Capsule. I chose the option 'use this with existing router' vs 'replacement of the existing '.

  I have a main tower and laptop. The laptop connects fine to the new network on the WRT160N and find the shared main tower connected to the Time Capsule network. But the Tower cannt see the laptop shared.

  I noticed that the IP address ranges are different bewteen the two networks. The Capsule is 10.0.1.X while the WRT is 192.168.1.X. This has nothing to do with why a computer can not see the other?

  Thank you!

  ~ GST

  The connection that you have enough to make his name as a cascade.

  Follow this link how connect 2 routers to each other.

• restore the new mac with airport Time Capsule

  Hello, when I google the title of this question, I get nothing but how to restore with time machine. I understand that the time machine is a backup

  the system on the local drive. How do you with ATC?

  You will be able to migrate your data from the backup when you configure the new computer; Click here for more information.

  (143273)

• Need help updating the firmware on a Designjet T770 44 inches.

  Hello

  I just bought a 44 inch Designjet T770. I had some small problems of implementation as the inks were obsolete, and a print head needed replacing. They have been sorted and now it seems to work properly but always tells me that I need a firmware update.

  The printer is currently on version 2.0.0.0 of the firmware and whenever I try to print it displays a warning that tells me an update of the firmware is necessary, however when I followed the links to get the firmware it just says page not found.

  I tried the search site of HP and the net for the latest firmware with no luck.

  Can we please we indicate a link for the latest firmware or send an email.

  It would be greatly appreciated.

  Thank you.

  Please follow this link to download the firmware for your HP product:

  http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=3980524&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dpl_77611_8%257CswEnvOID%253D228%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Please check before upgrading the firmware: 1) operating systems, Installation Instructions) 2.

• How to install the firmware for the router LinkSys E900 update?

  Hello

  I use Mac 10.7.5 and a few months back had bought E900 wireless router.  He has installed 1.0.03 firmware and I noticed there is a 1.0.04)is update.  I downloaded the update, which is a sync .bin file, but I don't have a CD burner, or access to a Windows machine.  How can I install the update of the firmware?

  Thanks,-Dave

  Just, simple, with your wired computer (never wireless) access the GUI of the router and perform the update of the firmware.  Just point to the .bin file and you leave.  Make sure you reset the router and reconfigure it once you're done hard.

• The just-in-time debugging

  I get an error message on my screen every five minutes. It says 'a runtime exception error has occurred in the Script' he also said possible debuggers - new instance of Editor Microsoft Scrpt. whichever option I choose the message reappears constantly. any help?

  Hi andrew-wolfman-wyrsta,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you have Visual Studio is installed on the computer?

  See the link below and try the steps to change the registry entry at disableJust in time debugging on the computer.

  The just-in-time debugging can always be activated even if Visual Studio is no longer installed on your computer. When Visual Studio is not installed, you cannot disable debugging from the Options of Visual Studio Just-In-Time dialog box. In this case, you can disable debugging by editing the Windows registry just-in-time.

  To disable the debugging by editing the registry just-in-time

  http://msdn.Microsoft.com/en-us/library/5hs4b7a6.aspx

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see the link below.

  Back up the registry

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.