The update of Windows 10 1511 reboot loop Bootcamp BSOD ACPI. SYS

It is a copy of my thread to http://answers.microsoft.com/en-us/windows/forum/windows_10-performance/windows-10-update-1511-reboot-loop-bootcamp/8653... as I was asked to post here by the Microsoft Support Engineer.

Hello

Friday night, I went to bed with a working machine. I had a late 2013 Mac Pro BootCamp running with a Windows 10 Pro installed, the Build version before 1511.

On Saturday morning, I woke up to my PC restart itself over and over again. It seems that Windows Update has decided to put a new version of Windows 10 on my machine without my knowledge. I discovered this after restoring an acronis backup (which took a few hours because of the number of incremental backups)

Occasionally (about 1 in 20 restarts) it would blue screen with an error:

SYSTEM_THREAD_EXCEPTION_NOT_HANDLED (ACPI.sys)

But the rest of the time he would just start, flash a window for a millisecond that says (I think) winlaunch.exe, then restart.

I tried a lot of things to sort it, including:

(1) restore from a backup, acronis to Friday morning, running sfc/scannow, and then runs the update

(2) the creation of a recovery USB, enter the console, change the boot to legacy method, so I can F8, then goes into all security modes and mode of illegal product, but I can find where windows 10 now puts the boot log

(3) restored from acronis, switched to mac, created a new bootcamp drivers usb, switched to windows and run the option 'fix drivers' before performing the update.

Ntbtlog.txt is not anywhere on the partition. I ran a dir /s > a.txt then open this a.txt in Notepad and searched him.

I don't know where to go from here. I can acronis restore of a windows 10 work machine the morning before installing mandatory 1511. I don't know how to delay the update no more, I noted during a restore I had delay on updates that are why it has arisen just now.

I do not know how to find where this BSOD ACPI.sys will come (even if it happens so rarely) or this that its trying to load just before it crashes (so I can try to delete the driver etc. by the front restored windows to upgrade)

I guess the widowed causes 10 to do a restore, then the restore fails.

Overall, I get at the end of my wits with this, to go a completely Windows 10 installation work Friday to more than two wasted days, restore backups, try again, rinse and repeat. It's now Monday morning and I am posting this as a ditch last attempt to solve the problem, your help would be appreciated.

If you need more information please let me know the location of the files, etc, or their names and I will do my best to have copies available for you.

I will now restore the backup again, uninstall loading of drivers, and then try the update of windows for the 4th or 5th time.

Thanks in advance,

Julian

Advertisement

Woo Hoo, I've solved the problem!

I uninstalled the drivers of graphics from AMD (with AMD Driver Cleaner) and Arcronis True Image Home 2013 at the same time, then let Windows Update run its course. Now I have a machine with Windows Version 1511 10!

It took me 4 days of downtime...

I hope this helps someone else.

Tags: Windows Software

Similar Questions

  • Download the update for Windows 10 1511 error

    This morning my computer running windows 10) tried to download and install the updated version of windows 10 1511. "Shortly after that the download starts, I get the following error.

    Error ox80070570 update files are missing or having a problem KB3112908.

    I tried several times with the same result.

    My Touchsmart downloaded and installed the update without error.

    Hello

    Just for is of course, this Kb3116908 update?

    If this is the case, I got the same error with a couple of machines, but it seems to install Ok using the standalone installer from the Microsoft Update Catalog - see method 2 on the following link.  Note:  You will need to use Internet Explorer for this

    https://support.Microsoft.com/en-us/KB/3116908

    Kind regards

    DP - K

  • Earlier today, I did the updates of windows. I rebooted and my computer kept restarting by itself before the logon screen. I was able to identify the error C00021A Windows Logon process.

    After trying to run chkdsk /f and still having no luck, I went and did a repair on Windows XP. It worked finally. Then, I went and did the 52 windows updates and then it happened to me again. I am now afraid to do updates on this computer window as I can't afford to have the same problem and spending 30 minutes to 60 minutes trying to fix it.

    Also to add, I tried safe mode and that has not worked. It did samething (restart the computer). Last configruration well known have had a result even it did not help.

    Help.

    -Jason

    Hello

    Visit this link for a few entries on the issue:
    http://forums.MajorGeeks.com/showthread.php?t=108122

    http://forums.techguy.org/Windows-XP/413334-stop-C00021a-fatal-system-error.html

    http://winforums.com/showthread.php?t=6400

    Search for institutions, update BIOS

    Good luck $

  • Cannot install the update for Windows vista (KB2718704) a safe mode or after clean window reboot

    I can't install the update for Windows vista (KB2718704), a mode without failure or after clean window reboot.

    What should I do?

    Hello

    ·         Did you do changes on the computer before the show?

    ·         You get the error message?

    ·         You are able to install other updates successfully?

    Follow these methods.

    Method 1: Temporarily disable the security software .

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot State to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    You cannot install some programs or updates

    Note: You must take the backup of the data before performing any installation of windows.

  • Logon with fingerprints does not work after update of Windows 10 1511 threshold 2

    Connect to Windows with Windows 10 digital fingerprints and native integration of fingerprint worked well after a new install of Windows 10.

    However, yesterday I received the update of Windows 10 threshold 2 aka 1511 update. After this update, I can't connect with my fingerprint more. Removal of fingerprints and re-learning of the fingerprints with Windows Hello do not help. I tried different fingers and made very prudent recognition. But even when the windows screen lock and trying to connect with fingerprint reader doesn't fail. Windows says it's the footprint of evil and after 3 attempts, I need to enter the PIN to login.

    How can I reactivate fingerprint logon?

    Driver: 4.5.317.0 (PS Synaptics sensors), signed by Microsoft Windows Hardware Compatibility

    The problem was resolved when a new driver has been installed by running the tool "System Update" on my Thinkpad Lenovo. The driver is installed by the tool is "Common validity of fingerprint driver 4.5.503" (the Watch Windows Device Manager driver Synaptics FP sensors 4.5.503)

  • Problems with the update of Windows on Windows 8 and also updated to Windows 8.1.

    Original title: update windows 8 to 8.1

    I really hate this computer is a laptop HP 2000 I got it from a friend and the place its been annoying the * out of me, I try to install the KB update, so I can skip all the other updates and I get an error of BS I use windows update, and I get 188 updates and when im installing the 180th update just white out and stops off the coast while he was on the charger, so I start backup it and now its stuck in an endless loop with the "configuration of the updates to Windows restore changes Failure" he was giving me an infinite loop of spinning points and all I want is to install windows on that 10

    Hi Giovanni,.

    Thank you for your response with the current state of the question.

    I suggest you try directly upgrade to Windows 10 of Windows 8 through the media creation tool.

    I recommend you to check the system requirements for the installation of 10 Windows on the computer.

    https://www.Microsoft.com/en-in/Windows/Windows-10-specifications

    Also communicate with the computer manufacturing and try to confirm if your computer is compatible to install Windows 10 or not.

    If your computer meets all the system requirements, I suggest to use the media creation tool in the link below and choose the option PC this upgrading to Windows 10. Before moving to Windows 10, I recommend you make a backup of important files and folders on the external hard drive.

    https://www.Microsoft.com/en-in/software-download/home

    Let us know if you need further assistance on related issues of Windows and we will be happy to help you.

  • Is no longer able to install windows updates after factory reset (windows service exception / failure set up the updates of windows roll back)

    So suddenly, I wanted to start my 3 month old laptop, but found that it was getting a system service exception.

    After hours of troubleshooting, I decided to go with a clean installed, this has completely fine until I installed the updates of windows (I have to install these updates to return Windows 8.1)

    After you install all the following updates occurs after a reboot:

    -Default configuration of the windows updates, roll back later, I get a system service exception.

    - Or directly a system service exception.

    These problems are solveable by a system restore to a point that has no updates.

    The next thing I could try is install the updates of windows 1 by 1 to see the update is causing this particular problem.

    If anyone has a way to solve this problem please help.

    The following link is a dxdiag to my machine:

    http://pastebin.com/Bfmxive7

    "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates

    http://support.Microsoft.com/kb/949358

  • Photoshop CS6 will not start since the update of Windows (Windows 7)

    This is the second time. Last week, after the update of Windows, Photoshop has started, but no window pops up. I reinstalled Photoshop. Today the same problem. After Windows Update reboot, Photoshop crashes in process Explorer and no window opens.

    Any idea which screws I have to drill?

    Thank you

    Roger

    Second reboot helped. Photoshop is run again.

  • HP EliteBook 850 G3: HP EliteBook 850 G3: its problems after the update of Windows 10 anniversary

    Hi people!

    After the update of Windows 10 birthday I have problems with my sound card. There are two sound cards listed by Device Manager. The first is "Conexant Audio of ISST" and the second "Intel High Definition Audio". I know not weather it was the case before the update. I just recognized it after the update when I had sound problems.

    In any case, on a sound start works on the other boot it does not work. It seems that Windows chooses the sound card, every time when it starts. Sometimes it takes the bad sound card.

    I tried to uninstall maps its and their resettlement. On the HP site, there is a driver for the Conexant map bot no driver for Intel High Definition Audio card. 10 Windows itself is not find a driver for this sound card. I also tried to reinstall the other drivers, chipset drivers for example. But unfortunately it did not help. I also tried to disable the Intel High Definition Audio, but also without success.

    What else can I try? I don't want to reinstall Windows. There must be a solution without this. Any ideas? Here's a screenshot of my device manager, perhaps it helps:

    If you need more information, please let me know.

    Best regards

    Ty

    I just tried this driver and I still have sound after 6 resets.

    http://h20564.www2.HP.com/hpsc/SWD/public/detail?swItemId=ob_171406_1

  • Product number: QH753EA #ABU: Wifi works do not since the update of Windows 10

    Since the update to windows 10 my wifi stopped working. The key of the keyboard is permenantly orange and that changes in airplane mode when you press. I can connect to internet with the ADSL cable. Network shooting report problems it says only: the "Wireles capability is disabled" but I cannot turn it on.

    Return you to W7.

    I highly doubt that Realtek will publish all the drivers for this model card W10 since they ceased support of the drivers for this card model to S8.

  • have we not back up our data to an external device before the update to windows 8.1

    have we not back up our data to an external device before the update to windows 8.1.

    update to windows 8 8.1 will affect the data in the laptop...

    @swati90

    If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

    If you're updating with an ISO will always give you the opportunity to register personal files.

    Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

  • HP ENVY dv6 Notebook PC: press the / STOP the envy of hp dv6 7204se do not work after the update of windows 10

    the power button of my hp dv6 7204se envy key do not work after the update of windows 10

    any help on this please?

    .

  • conditionally quickly monitor the key based on LabVIEW being the application of the update in Windows

    Hi all

    I use LV 2009 in Vista.  I use a VI dynamic, in addition to higher level, to monitor the key pad.  It works great except for the fact that when I have another application open during the execution of the LabVIEW application, it still meets the press of button.  that is so that the use of the calculator and pressing the ESC key to clear the display, LabVIEW reacts as well.

    LabVIEW will know if it is the "application of the update" in windows environment?  I know he can tell it is windows that are in front, but what about other applications?  I think to use this to filter keys when LV is not the front application.

    Thank you!

    Charlie

    This is the vi registered under a vi 2009

  • I can't install the update of Windows KB951847x86. Any help on this? Thank you.. .ragtopkid

    I can't install the update of Windows KB951847x86. Any help on this?     Thanks... tagtopkid

    ragtopkid,
    Take a look at this article as it addresses the issue.
    Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • My system installs the updates of windows, whenever I stop

    My system installs the updates of windows, whenever I stop.  What should I do to prevent this?

    See: http://support.microsoft.com/kb/910339 . All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.

Maybe you are looking for

  • How to limit the messages to a recent period in separate folder

    I use Thunder manage may email on the server using POP 3 and use the filter to separate different email to a different in thunderbird folder for example folder and folder b. e-mail on file B not of equal importance, so how can I limit the messages to

  • Help! After today update to 18.0.1 my Firefox is unable to access any site.

    After installing today, my Firefox is completely unable to navigate. If I type a URL in the URL box and press ENTER, I see the white screen (titled 'new tab' tab) I've had many tabs in groups of different tabs. Tabs are still displayed in the view ta

  • No sound with video from Youtube

    HP7-1210 Windows 7, Home Premium SP1, that is to say 10. This problem just started today.  I have video but no sound with youtube.  I have no sound with any other programs.  I downloaded the latest version of Adobe Flash and restarted the computer. 

  • Reinstall the real return window 7

    I know that my window is not genuine because the person b4 that changed to the professional of the window in this laptop that I use. It is supposed to be home premium window. I have the product key to the back of the laptop. How to install home premi

  • Restore time to blackBerry Smartphones BB 8100

    How long does take to 'Restore' on a 8100? Mine has been going on for an hour now. What happens if I cancel it?