the update system

My update does not work I have error code80070002

http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

Windows Update Error 80070002

If you receive the error Windows Update 80070002 of upgrades, you must delete the temporary update thatWindows uses to identify updates for your computer. To remove temporary files, stop the Windows Update service, delete the temporary update files, restart the Windows Update service, and then try to check for Windows updates again.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

http://support.Microsoft.com/kb/971058

How to reset the Windows Update components?

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

If the above does not solve it:

Windows Update Forum:

You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

In this way, you will receive the best help.

See you soon

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Cannot install the update system for Xperia E1

    I can't upgrade my Xperia E1 to the latest version 20.1.A.2.13. My mobile Update Center shows me the update of the system.

    I can download the update, but when I click on install I get an error it says not able to install the new version of the software. Try again. I tried a few times download the update even but it still won't install. I don't have my phone roots.

    If anyone has experienced this? What can I do for this?

    My last Android version is KitKat.

    The error is not any reason

    eh, no one could help me.

    I finally solved it myself. I just formatted my whole phone and then I tried to update. To my amazement, he got successfully updated to this version.

  • T500 problems with system since the update system

    Hey guys, I hope you can help me sort my problem:

    Yesterday I did an update on my T500 system... after that I wanted to play a little GTA IV... usually I play on the graphic medium with about 28-30 FPS... after the update yesterday, I had 12 FPS...

    result of the update was a new power manager... new... new logins drivers Bluetooth... AND a new Module update for Vista

    Anyone of you have any ideas on WHY my system is suddenly so slow?

    I thought that maybe a Virus was on the right track... but then I installed my Antivir Premium and he did not find anything from now on...

    Well, I'm looking forward to your suggestions and I appreciate your efforts to help me; D

    Greetings

    Hi Robert,.

    I think you should both try to turn it off or put it to maximum performance.

    If the won´t of the situation changes, the last procedure would be a restoration of the system to a previous state of vista.

    If it s a vista update problem, google search gives some tips for updates vista and ati performance;

    Edtit: misspelling.

  • With regard to the update system - restriction of access to records admin app

    Regarding the system update in this thread to update system - restricting access to folders app admin , I can not answer in this thread because I'm not a mod and there is no reply button.

    My question concerns the public record, what we do with it?

    S ' there is a placed file in it can it use liquid?

    - I assumed that the front-end server can access this directory, but (from the front end) we won't be able to use the new API v3?

    - Other applications access to the updated files? That is to say. He says in public, it is that? It is not safe at all in other words?

    -Is the case more as a temporary workspace or the (public) long-term storage? Can other apps delete files there? That is to say. I might need to make sure that a file exists before you assume it's there.

    Hello

    1. The files in the folder admin app can run modules and liquid (if you do not use another library of client-side library which is in conflict with the liquid syntax)
    2. Yes, front-end can access files on this folder (you cannot list the contents of the folder of front end) and you can access the REST API using module_data; direct access to the API is not possible, because you will need to be authenticated
    3. Yes, other applications can access the files put there, same as possible that nobody knows the URL of the page
    4. It is a public storage for long-term applications. Apps cannot delete files in other folders for apps, but they can read;

    Cristinel

  • Cannot install the update system for Windows 7 tool

    After downloading the installer from Windows 7 64 (October 2014) to "Update the tool of the system", I tried to install the program. However, "Windows Update Standalone Installer" allows you to "search for updates on this computer... "and the status bar continues to streak, but after several hours, no progress has been filed. A backup of hard drive is waiting on this program to solve the problem.

    You will need to stop the search of updated running in background. The value of the automatic updates to "never check for updates" and then restart.

    Best regards, VZ

  • She made no answer due to the update of the system interuppted reference satellite

    during the update system was interrupted, now there is no response to all the

    What do you mean by system update?
    Have you tried updating the BIOS or Windows operating system?

    Like the safe for laptop computer using a startup disk recovery disk windows, Linux on the live disc, etc?

    Disconnect the power adapter and remove the battery wait some time for example 1 hour.
    Then reconnect both sides and try to turn on the unit.

  • The Lenovo system update launch

    Displays the start-up screen and then nothing happens. In windows services next to the update system it displays: cannot read the description: error code 2. When I try to start the service it displays ' Windows didn't start the system update service.» Error 3: the system does not have the specified path. "Update system of uninstalling and reinstalling gives the same result.

    Thanks, but I was using the correct version. I got it working through a combination of uninstall and use the fix microsoft tool and then put it back.

  • ROM update / update system YOGA book Lenovo YB1-X90F

    According to the update system it is has updated of YB1-X90F_USR_S000111_1608261730_WW06_BP_ROW. However, if I download this update with update system in the Android update process is stopped / during the 'search' with the error is not enough space. Although it is almost nothing installed. If I try to update with LenovoSmartAssistant I get the error: "Flash failed. In the LenovoSmartAssistant journal, I find the following lines: [18] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_transfer_thread: Rom transfer progress 100 [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: Install "LenovoSmartAssistant\plugins\75fc9be6-29e6-495f-8c0a-93f9e1971133\OnekeyUpdate_signed_rdv2.apk" [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: updated peripheral online compare [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: INFO device outline update released [21] LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread : Check the update result beginning [21] INFO LenovoSmartAssistant [(null)] - data results of OneKeyFlash.Business.FlashOperate.firmware_update_thread: error [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: check the update end result [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: hierarchical update of the device [try next: True] [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: hierarchical update of the device [err [: true]... [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: hierarchical update of the device [try next: True] [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: hierarchical update of the device [err: True] [21] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Business.FlashOperate.firmware_update_thread: contour update finished device: PHONE_UPDATE_FAILED [33] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Controls.UpdateRomFrame.CurrentDevice_OnBusinessStatusChanged: e.status: PHONE_UPDATE_FAILED [33] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Controls.UpdateRomFrame.CurrentDevice_OnBusinessStatusChanged : device status: WM_DEVICE_ONLINE [19] INFO LenovoSmartAssistant [(null)] - OneKeyFlash.Controls.UpdateRomFrame.CurrentDevice_OnBusinessStatusChanged: BusinessStatus.PHONE_UPDATE_FAILED

    It worked after I unlocked the bootloader.

  • T500 receives do not update via update system after Exchange of hard drive

    Hello forum,.

    I replaced the broken Samsung 1 TB of HDD in my T500 with a 1 TB WD drive and restored the laptop of my latest backup (restore and recovery). After that everything seemed OK and promising until I realized that the Windows Update client and system update were not able to connect to their corresponding update servers or not able to actually look for updates.

    It took me a while to find an answer and a solution for the problem of Windows Update:

    The Samsung drive had the size of logical sector of 512 bytes, and the size of 512-byte physical sector. However, WD has now logical alternative but 4 k disk size physical sector of 512 bytes. Given that customer Windows Update (Windows 7 x 64 BTW) uses a database of local physics based on the logical sector size could play a role.

    The solution I found was to replace the SATA driver installed by the last RAID Intel rapid storage driver. This corrected some WRT question for sector sizes THAT NTFS is reported to the operating system. And this fixed the problem of Windows Update. Since then, the machine can connect and get Windows updates from Microsoft Windows Update servers again.

    Unfortunately, the fast RAID storage driver installation has not fixed the problem with the system update. Whenever I run the system update it invites me to machine type model, OS and language, and after that, I get the error message

    "The server system is currently unavailable. Please try again later. »

    When I use a second Thinkpad T61 or an old T40 at the same time and run the update system on these machines they are still able to connect and retrieve a list of available updates.

    I know that I could solve the problem by returning to a 1 TB drive with the physical sector size of 512 bytes, or probably a complete reinstallation of Windows 7 hard disk WD.

    So the obvious question is: is there anything else I could do?

    I tried uninstalling and reinstalling system update without success.

    Best regards

    Ralf

    Hi, as I wrote in my first post I already tried your solution without success. System update was not even able to connect to the servers it is (or just showed this error for some reason any). However, I looked at the latest version of the update system released in October (v5.00.0019) and I have replaced v4.03.0012 with that one. And Yes - this time back to normal operation. Thus, TVSU v5 fixed somehow the problem even a never version v4 TVSU wasn't able to fix. The cause of this disorder is still unknown. Best regards, Ralf

  • HP 2113w 19: windows 8.1 not will not activate on HP19-2113w after update system.

    Everything worked fine on my PC.  Then the other day, he crashed and said there is a disk error and to analyze the entire disk to find the error. He finished scanning, but windows 8.1 would charge not successfully.  This is why I made an update of the system through HP recovery.  After having done that, windows should start normally, but I lost my activation.  When I tried to activate the answer has been ' key does not work try again later "or something like that.  Kept by train, no luck.  I thought it might have been an error with the update system, so I did the total system reset (after registration of personal data).  Now, I have the same problem with the activation and if I try to navigate in the normal way to activating the screen, the screen disappears.  I can get to the activation by using the command line.   but the key still does not work.  The key that I use I extract from my BIOS data.  Also, I ran the update and reset to the original hard disk partition.

    I hope someone has a solution to this.  Thanks advanced

    Bill

    Hello @beekster,

    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

    I read your post on how your desktop computer will not activate after a system refresh, and I would be happy to help you in this case!

    To fix this problem, I suggest following the procedure described in this resource on the activation of Windows 8 product, which should help to activate Windows 8.1 on your system.

    Please re-post with the results of your troubleshooting, and I look forward to your response!

    Concerning

  • CLIQ: Motoblur: unable to delete accounts of events or check the updates on phone

    I just went through a password reset with my Motoblur account online. Now when I try to check the updates system I get the message "the attempt to upgrade has encountered an error because of the failure, connect". I am also unable to delete accounts of Happenings so that I can configure them again to reactivate the Happenings. It seems impossible to get the password for my Motoblur account on the phone.


  • error 800b0100 to occure while downloading the update

    Occure error downloading update

    Windows PowerShell 2.0 and WinRM 2.0 for Windows Vista (KB968930)

    Oprating systems: Windows vista Home premium 32-bit

    Help, please

    0X800B0100 TRUST_E_NOSIGNATURE

    No signature was present in the subject.

    If you receive Windows Update error 800b0100, it means that a file needed by Windows Update is corrupted or missing. System update readiness tool can correct some conditions that can cause this error. To use the tool, follow these steps:

    1. go to the System Update Readiness Tool http://support.microsoft.com/?kbid=947821Web page.

    Under the "Advanced information for users" section, find the Windows edition and the system type of your computer, and then click the link to download the system update readiness tool. To find your edition of Windows, see view your computer information http://windows.microsoft.com/en-us/windows7/View-your-computer-information.

    Reset

    2. run Windows Update again.

    Note

    As a general rule, the scan takes 15 minutes or less, but can take longer on some computers. The Windows Update progress bar is not updated during the scan, and progress seems to stop at 60% complete for some time. This behavior is expected. The scan is still running and you should not cancel the update.

    The update system (or CheckSUR) tool is a program that performs a unique analysis for problems that might prevent you from installing updates on your computer. The problem above is one of the conditions that the CheckSUR tool can check and repair.

    If the CheckSUR tool encounters problems while running, it records them in a file called CheckSUR.log, located in your Windows, under Logs\CBS\ folder. On a default installation of Windows, this will be C:\Windows\Logs\CBS.

    If the problem persists after taking these steps, go to the Microsoft Update Solution Center website http://support.microsoft.com/ph/6527#tab0 to find more information about the error code or to request support by e mail.

    04/14 / 1103:13: 37 am

  • Make the updated recovery CD

    I have a Compaq Presario SR1620NX who has files of recovery is in a box partitioned hard disk. The OS was originally XP but with all windows updates, it is now XP sp3. The computer has recently had a critical error and I had to do a system recovery. It took all day to get the updated system to its modern configuration. My question is, can I do a recovery cd or dvd that would recover the computer to today's configuration and if so, how?

    Thank you

    Yes, it is possible to make using "recovery DVD" imagery of disc or disk cloning software. Just do an internet search for "clone a hard drive" or "imaging a hard drive", as there are so many choices freeware and selling retail. Read the information you find and choose the one that best fits your needs and your budget.

    Frank

  • I can not select Windows 8.1 upgrade and other applications after update system

    I just refreshed my laptop Windows 8.1 after that that he returned to Windows 8... I opened the store and I can't select Windows 8.1 upgrade and other applications. What can solve this problem?

    Hey Kevin,

    If you bought your laptop with Windows 8, and she had a recovery partition, it would reset to Windows 8 when you want to run a system to refresh. This also applies if you have performed the update system using a disk installation or recovery of Windows 8. You mentioned that you are now unable to update Select 8.1 of Windows update, the Windows store.

    The Windows 8.1 update is not listed? Or you can not face problems with the update 8.1 for Windows from the Windows store?

    If you are facing the issue later, what happens when you click on the update of Windows 8.1 in Windows store? An error message appears?

    You also mentioned that you can not store of Windows other apps? What happens when you try to install?

    If you are unable to find the Windows 8.1 update in the Windows store, try the steps suggested in this article and checking:

    http://Windows.Microsoft.com/en-us/Windows-8/why-can-t-find-update-store

    If you are unable to install the update Windows 8.1 displayed in store Windows, then try these steps and check:

    First of all, make sure that you have installed all the Windows updates available, including 2871389 KB and KB 2917499.

    Method 1:

    Run the Windows update troubleshooting utility which can automatically detect and fix most of the incorrect settings that could cause problems with the download of updates. See the following steps:

    1. Press the Windows key + F to bring up the Search bar charms.
    2. Type of Troubleshooting and press enter; Click the tab settings , under the search box.
    3. Click on the tile to find and fix the problems and then click on the button show all the left pane.
    4. Click the Windows update troubleshooting tool and run it.

    Method 2:

    If the problem persists, disable any third-party antivirus software that you may have installed temporarily and check.

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 3:

    If the problem persists, start your computer in a clean boot state, and then try to install Windows 8.1. Start your computer in a clean boot state, you can reduce conflicts between software and help identify the root cause of the problem. You can read this article for more information:

    http://support.Microsoft.com/kb/929135

    Note: after the resolution of the problem, reset the computer to start as usual. Refer to the step How to configure the computer to start as usual after a boot minimum troubleshooting under more information.

  • update system never worked

    If anyone can help?  When I try workarounds all live upward.  went to downloads and each new driver creates problems.  How can I update my system?  Thank you.

    I think you have misunderstood.  I was typing on a laptop so perhaps I was not as clear.  From the first day I bought my Lenovo 3000 N100 768 A52 Vista running the update system called Lenovo care program had never, ever have been beyond more than 25 percent of what she tried to do it before I got an error message indicates that there is an error, a problem that he could not continue and it wouldn't work.  When I wanted to see if them were new drivers update I went to Lenovo website and tried to download newer drivers like that and it's that damn system.  After trying to spend 6 months to get the laptop to come back I just put it on the shelf and forgotten.  A few months ago, I dug it and tried again to make it work again and played with thinkadvantage or what ever the rescue and recovery schedule it and that no longer works.  I tried to switch to XP pro and that has not worked.  But back on the shelf.  The other day when I turned it on and now Vista worked again.  But the fingerprint sensor does not work, the camera does not work and a full reload of the battery approximately twenty minutes.  Connect the adapter to the coherent power of means so I tried to run the update of the system, same problem.  Nothing works.  Is returned on the Lenovo site and tried to watch downloads and then began to read the forums and I seem to have a lot of the same questions that everyone has with updated drivers.  Except that my laptop broke down again.  It is also short and polite as I can tell.

Maybe you are looking for

  • Satellite M300 becomes very hot

    I'm only under internet Explorer with 3 tabs at the moment and even if it makes my laptop really hot. I don't always use it on my bed or on my laptop on a flat surface cause, he gets all hot time even when I'm not running a lot (Eg. now). I always sh

  • Updates Windows stuck on 0%

    Hello My screen tells me its download updates but has been blocked to 0% for the last hour and doesn't seem to be downloading something, 0KG aswell. All ideas Thank you

  • problem with firmware 1.21 WVC54GC

    Hi, I have wvc54g v1.1. It has worked well. It does not work after download 1.21 firmware. I plug in the router, but I can't. I have reset over and over again. I can't reach the camera that I can't work on it. How can I solve this problem. Thenks...

  • IMPLEMENTATION of 6500 Firewall Services Module

    I know well enough the 5xx PIX firewall and although I read all the docummentation on the WSF for the 6500, I still don't understand how it works. I have 20 + VLAN with only 1 VLAN I need from 20 other VLANs, but welcomes the user 20 + VLAN must obta

  • How I've hidden the elements after the query when moving back to the previous record

    Hello worldI create a form with the developer 6i and I use set_item_property(item_name,visivile,...), in post_change, in when_list_change relaxation tooto hidden and activate certain elements.When I enter the data, everything works fine, when I do a