The updates that fail to install.

For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

For several years now I have received a notice of updates and they have always failed to install. I gonored the problem since the computer was working ok (my use is very limited). Reading some of the information provided by you, dear friends, I decided to cry HELP.

Do not jump.  Even if you know that you did 30 seconds before you are about to do again because you are being asked to do things.  In order...  Wait as this to blow up your weekend.

Search for malware:

Download, install, execute, update and perform analyses complete system with the two following applications:

Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

Search online with eSet Online Scanner.

The less you have to run all the time, most things you want to run will perform:

Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

Do a house cleaning and the dust of this hard drive:

You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

Windows XP should take between 4.5 and 9 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
http://www3.TELUS.NET/dandemar/spack.htm
(Especially of interest here - #4)
(Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

How to use disk cleanup
http://support.Microsoft.com/kb/310312

You can disable hibernation if it is enabled and you do not...

When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

-Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
-Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
-Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

You can control the amount of space your system restore can use...

1. Click Start, right click my computer and then click Properties.
2. click on the System Restore tab.
3. highlight one of your readers (or C: If you only) and click on the button "settings".
4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
5. click on OK. Then click OK again.

You can control the amount of space used may or may not temporary Internet files...

Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

-Open a copy of Microsoft Internet Explorer.
-Select TOOLS - Internet Options.
-On the general tab in the section 'Temporary Internet files', follow these steps:
-Click on 'Delete the Cookies' (click OK)
-Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
-Click OK.
-Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
-Once it's done, click OK, close Internet Explorer, open Internet Explorer.

You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

CCleaner (free!)
http://www.CCleaner.com/
(just disk cleanup - do not play with the part of the registry for the moment)

Other ways to free up space...

SequoiaView
http://www.win.Tue.nl/SequoiaView/

JDiskReport
http://www.jgoodies.com/freeware/JDiskReport/index.html

Those who can help you discover visually where all space is used. Then, you can determine what to do.

After that - you want to check any physical errors and fix everything for efficient access"

CHKDSK
How to scan your disks for errors* will take time and a reboot.

Defragment
How to defragment your hard drives* will take time

Cleaning the components of update on your Windows XP computer

While probably not 100% necessary-, it is probably a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

Download and run the MSRT tool manually:
http://www.Microsoft.com/security/malwareremove/default.mspx
(Ignore the details and download the tool to download and save to your desktop, run it.)

Reset.

Download/install the latest program Windows installation (for your operating system):
(Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
(Download and save it to your desktop, run it.)

Reset.

and...

Download the latest version of Windows Update (x 86) agent here:
http://go.Microsoft.com/fwlink/?LinkId=91237
... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

Close all Internet Explorer Windows and other applications.

AutoScan--> RUN and type:
%SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
--> Click OK.

(If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

Reset.

Now reset your Windows with this FixIt components update (if given the choice, you * will * use the aggressive version):
How to reset the Windows Update components?

Reset.

Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

Tags: Windows

Similar Questions

  • I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to complete t

    I can't not persistent install the latest update of Adobe Audition. It is not a CC version but came on disc in CS6. I constantly get this error message after you download the update that does not install: U43M1D207. What are the steps to perform this installation?

    Adobe Audition: For Macintosh

  • Find that the updates that have been installed

    I can't locate the file or anything that shows me all the updates that were loaded on my computer. Please refer to this list.

    Thank you

    So say you that this windows update adds an extra user account? weird.

    Please identify the account?

  • Can I re - download the updates that failed to download

    My downloads show that many do not have

    Hi stevepest,

    ·         Did you do changes on the computer before the show?

    ·         Updates failed to install?

    ·         You are able to install other updates successfully?

    ·         You get the error message for updates failed?

    Follow these methods.

    Method 1: Temporarily disable the security software.

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2: Put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

    How to configure Windows XP to start in a "clean boot" State

    http://support.Microsoft.com/kb/310353

    Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

    After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

    (a) click Start, run.

    (b) type msconfigand click OK.

    (c) the System Configuration Utility dialog box appears.

    (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

    (e) when you are prompted, click on restart to restart the computer.

    Method 3: You can also manually install updates (KB number) by downloading from the Microsoft Download Center.

    http://www.Microsoft.com/downloads/en/default.aspx

    Method 4: Follow the steps in the article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

  • The update installation fails

    I reinstalled my Windows XP including Service Pack 3 operating system. After the installation I had to download several updates, they are all installed except one. "Microsoft .NET Framework 1.1. Service Pack 1 ". I get the message "cannot" and "was not installed. Is how important it? If so, how can I install it and if not, how can I get rid of him. It hangs in the window update cannot be installed and cannot be deleted. Apart from this, the computer works fine. Thank you

    Hello
    • Do you have an error message during the update of Microsoft .net Framework 1.1 SP1 installs?

    To learn more about Microsoft .net Framework 1.1 update, see the following article:

     
    Also take a look at the following link:
     
     
    I suggest install you Microsoft .net Framework to update on the computer. Follow the steps below to resolve this issue.
    Step 1:
    Review update history to check the KB (Knowledge Based) number associated with the update that fails to install.
    To check the history of Windows XP Update:
    1. click on start, point to all programs, and then click Windows Update or Microsoft Update.
    2. on the Web site, click on view update history.
     
     
    Note: Ensure that the number associated with the update of Microsoft .net Framework is KB867460 only then follow step 2.
    Step 2.
    Download the stand-alone Microsoft .net Framework 1.1 SP1 update package and install it in the boot on the computer and see if the problem is resolved.
     
    Note: When you have finished troubleshooting, proceed as explained in the article of boot is a way to reset the computer to start as usual.

    I hope this helps. Let us know if you need more assistance.

  • How long can I keep the updates that are added to my computer

    If they can be taken how know which I should keep longer than others

    Do not uninstall the updates that have been installed in your operating system.

    If you do, you're interfering with the security and performance of your operating system.

    This is the reason for security and performance updates are installed: enforce your operating system safely and to its ability to best...

    See you soon. Mick Murphy - Microsoft partner

  • There are 35 updates of security that fail to install. I tried many solutions on your Web site and none of them helped.

    The following updates were successful: KB2633870, KB2656351, KB2518870, KB2572078, KB2487367

    Specific updates that have failed: KB2647518, KB2641653, KB2621440, KB2647516, KB2661637, KB2603381,.

    KB2618451, KB2592799, KB2570947, KB2536276, KB2566454, KB2544521, KB2535512, KB2412687,

    KB2510531, KB2485663, KB2393802, KB2440591, KB2423089, KB2646524, KB2598479, KB2585542,

    KB2631813, KB2584146, KB2633171, KB2620712, KB2619339, KB2624667, KB2641690, KB2544893,

    KB2507938, KB2476490, KB2509553, KB2507618 AND KB2506212.

    I tried Microsoft Fix; I tried to kill .NET 2.0 and then installed .NET 4.  Nothing works.  Suggestions?

    The error message was that the update has not been installed.
    I have 3 SP.
    Method 1 has not helped (I had done this many times before).
    I did the boot, but it does not solve the problem either.
    I have tried microsoft update web page of microsoft and, when updates failed, looked at the results.  When I clicked on every failure in the list, I saw the error codes for the first time: they were all the same: 0 x 80070017.  When I looked this error code, I was told to run chkdsk/f.  That solved the problem.

    Thus, while the proposed solution has not resolved the problem, he took me on a path that eventually made and I'm VERY grateful for the time that was taken to help me.  Thank you very much!

  • I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

    I received an error code 800b0100 update. I just installed windows 7 student disc and my computer guard stop. I me trying to get the updates that might help the closing of the bottom.

    Hi Happyrockgeek,

    Welcome to Microsoft Windows 7 answers Forum!

    This problem occurs if the Windows security .dll files are incorrectly registered.

    To resolve this problem, you can perform the two methods of troubleshooting, check if the problem is resolved.
    Method 1:
    Run (Checksur.exe) system update readiness tool.
    To do this, follow these steps:
    1. download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations. For more information about how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base:
    http://support.Microsoft.com/default.aspx/KB/947821
    2. try to install the updates again.
     
    Methods 2.
    Reset the Windows Update components.
    1. to reset the Windows Update components automatically, click the fix button in the link below.
    http://support.Microsoft.com/kb/971058 
    2. click run in the file download dialog box and follow the steps described in the fix it Wizard.

    I also suggest you to install the latest version of Windows Installer 4.5.
    Follow the link below to download:
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en
    and you can also try to install after you turn off the firewall.
     
     
    It will be useful.
     
    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum.

  • Hi, I have the icon of AutoUpdate on my toolbar, when I install, I see that it is the update even I have installed at least 6 times

    Hi, I have the icon for AutoUpdate on my toolbar, when I install I see what the update even I have installed at least 6 times, the update is:

    Security Update for Microsoft .NET Framework 2.0 SP2 on Windows Server 2003 and Windows XP x 86 (KB2633880)
    A security issue has been identified that could allow an unauthenticated remote attacker to compromise your system and take control. You can protect your system by installing this update from Microsoft. After you install this update, you may have to restart your system.

    He tells me that the update was a success!

    Concerning

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  • Here is a list of the driver updates that do not install for one reason or another: Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller your driver is out of date.

    Here is a list of the driver updates that do not install for one reason or another:

    Intel Desktop/Workstation/Server Express Chipset SATAAHCI controller

    Your driver is out of date.

    The installed driver date 30/05/2012

    New driver Date 18/09/2012

    After the next driver update > the following message appears:

    This driver downloaded successfully.

    You want to install it now?

    Yes. Then was the following result:

    Please update your Windows update Agent version.

    You can download the latest version by clicking here.

    If the Microsoft FixIt solution above does not solve your problem.

    Check on the Intel site.

    For example: http://www.intel.com/p/en_US/support/detect

  • I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

    I have CS5.  Cannot install updates.  The update process runs, but once finished, I get an error message that the update could not be installed.  I have a Dell PC with 8 GB ram and 2 TB of storage.

    The latetest (cloud) update sometimes does not work with old programs... Try to install your updates manually

    Beginning of the updates here and product selection, read to see if you need to install updates in the order of the numbers, or if updates are cumulative for the product http://www.adobe.com/downloads/updates/

  • I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

    I have CS5 and adobe update reported that I have several updates of loans - when I started the update, it failed at every update.  Please notify.

    Please see:CS5 updates fail

    Troubleshoot update | CS5, CS5.5, CS6

    I hope this helps.

    Concerning

    Megha Rawat

  • KB963671 update continually fails to install with error 80070652

    I have a HP Pavilion dv6000 laptop under Microsoft Vista Home Premium (32 bit).  My Windows Update is configured to be installed automatically, but there is an article that fails to install every day.  The update by using the Microsoft Script Editor (KB963671) fails to install with error 80070652 code.  I read this error code indicates failure prerequisite installation/update, but I don't remember that ever happening.  When I run Office Diagnostics, everything comes out very well.  I searched the Microsoft discussion groups and communities, but have not been able to discover a solution.  Any help or insight would be greatly appreciated.  Thanking you in advance for your help.

    -Vince

    Hi U07348,

    Have you tried to install the update as a stand alone.
    Here is the link to download the update by itself.
    If it does not install to proceed with the following steps.
    Step 1
    Download and install Windows Installer 4.5
    Step 2
    Download and Install CleanUp Utility
    Let us know if you need help with this problem.
    Thank you

    Martin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Vista updates repeatedly fails to install (error 800b0100 code and 80073712)

    original title: Vista updates repeatedly fails to install

    I get 80073712 and 800 b 0100 error codes when you try to update for Windows Vista (KB968389),

    Microsoft .NET Framework 3.5 Service Pack 1 and .NET Framework 3.5 Family Update (KB951847) x 86, and update for Windows Vista (KB975467) ISecurity. I tried the patch but no luck.  How can I download these updates?

    Download and run the system update tool.

    (http://support.microsoft.com/kb/947821/)

    Try to install updates again.

    Note After you run the tool, the Checksur.log file is located in the following location:

    %SystemRoot%\Logs\CBS\

    In a default installation of Windows Vista, this file is located in the following folder:

    C:\Windows\Logs\CBS

    A general solution, *IF* is no malware problem, would be to run the system update tool.

    (When was the last time you checked your system for malicious programs?)

    In addition to using an anti-virus, as Malware/spyware scan:

    http://www.Malwarebytes.org/products/malwarebytes_free>

    Malwarebytes is as its name suggests, a Malware Remover!

    Download the free Version from the link above.

    In addition, scan with the free Version of

    http://SUPERAntiSpyware.com/superantispywarefreevspro.html >

    The System Update Readiness Tool for Windows can correct some conditions that cause Windows Update error 80073712 error code.

    08/15 / 1104:45: 22 am UTC

  • Vista update repeatedly fails to install

    Problem: I've tried several times to apply the latest Windows updates to my Vista Home Premium (SP2) system. Everytime I try I am informed that the update failed with error code 80070020. (During attempts to update it tells me that the updates may not be configured correctly).

    After checking the error code 80070020 on the Windows site, I tried both a) disable the antivirus software (Avast) b) perform a clean full reboot
    None of these works
    Please notify

    Arthur White
    ****************************
    Additional information updates include - 9 'Important' updates including the various updates of security such as KB2507938 - 8 optional upgrades such as IE9 are my details of software - Vista Home Premium SP2 - Windows product ID 89578-OEM-7318027-96169 hardware is assembled by mesh:-processor Intel Core 6600 2.4 Ghz 2 GB 32-bit , operating system: Windows Vista.
    I have already submitted a request on the site SUpport and Microsoft Help (see link below) and used Diagnostic tool, but they don't have a tell asking me the same question here (not very useful)

    Points:

    (1) I only wanted to read this:

    .... Then, I found that the update had apparently been installed months ago ...

    (a) you can rename the folder C:\Windows\SoftwareDistribution, but much better is used this FixIt:

    http://support.Microsoft.com/kb/971058

    Perhaps this might help and updates would not be on the list of the automatic updates because they are already installed.

    (b)-

    (c)-

    (2) is OK, how I already wrote - "gmreadme.txt" - is only a txt file.

    Try looking in history ofupdatesif updates are already installed.

    LC

Maybe you are looking for

  • Script Date added and last played Date

    Looking for a script to change the "Date added" and "Last played" in iTunes on Windows. Doug AppleScripts have a "new last played Date" but unfortunately its scripts work only on OS X.  I checked http://samsoft.org.uk/iTunes/ , but it doesn't have th

  • How to increase frequency resolution in the power spectrum?

    All, I work on the analysis of data GET vi, and manage mucho when it comes to display a simple power spectrum which gives a precise simulation of sine wave frequency I use now.  Most of the brain waves are between 1 to 50 Hz, and so I try to get a re

  • IMAQdx Open Camera.vi very slow

    Hi all I use a firewire IEEE1394, a camera with IMAQdx with labview 2009. 1. I have configured MAX camera and tested. It works very well. 2 - I used the "Grab and attributes Setup.vi" Labview examples. With the vi, it takes about 1 second to find the

  • HP Officejet 7310 AOL: Portable printer model HP Officejet 7310 won't come.

    Printer off; Impossible to get it back on by pressing the key. I checked all the electrical connections are OK. This problem started right after I replaced the Tricolor HP Ink Cartridge 95. THE indicator light will not illuminate. Is there a hidden f

  • connectivity between 5508 and two different 4507 switches

    Hello I've implemented with 5508 controller which is connected to two different chassis (Cisco 4507 switches). I have some doubt about the configuration of the interface on 5508 WLC. How can I configure the AP Manager interface with two physical port