The upgrade of Cisco ISDN Link software

Hi guys!

Miss me something, when you try to download the software on the ISDN link. I have the connected to the PC via a serial cable, I can then go into the API with HyperTerminal and set the root password, but when I try to connect with WinSCP I just get the error ' gethostbyname: unknown error "." I need to enter the hostname of course, this is a silly question probably, but that is the same as the name of the system unit?

I can't use the URL method since we have no internet connectivity for the device.

Any ideas would be very welcome, it's probably something very simple that I'm missing. The current configuration is the default value of the plant besides the root password change.

WinSCP requires that your ISDNLInk and your PC are both on the IP network, it is not copy on a serial connection, you are just using the connection set for call orders.  Similar to the TFTP method (what you can do on your own TFTP server, it cannot be the one on the Internet).

Another option, which I think the best way to upgrade an ISDNLInk, is to do it via the web interface of the SX20 or some point of endpoints that you use with and you can download the file via your web browser.

Wayne
--
Remember the frequency responses and mark your question as answered as appropriate.

Tags: Cisco Support

Similar Questions

  • Window command prompt of the blackBerry keeps opening with link software

    I am running Windows 7 Home Premium - 64-bit. After link was last updated, I started to see an opening for a flash with what seems to be a running BACK in a window of the window command prompt.  I have tried several techniques to eliminate this disabling including startup commands. After a service at the local computer store, we thought we had it licked. First time I plugged my phone - nothing. The computer does not recognize it and I opened the link - this is the boring window was popping up again. I completely removed the link and voila - the window has passed. I've never had this with previous versions of link. Any suggestions?

    Hello Bthomoson

    Tried to install link blackberry, then proceeds to reboot the PC and product to check if your problem still shows the persistence...

    This is the latest version of Blackberry link for Windows

    https://swdownloads.BlackBerry.com/downloads/contactFormPreload.do?code=A8BAA56554F96369AB93E4F3BB06...

    Kind regards...

    Bravo * don't forget to give to these people who help and advise you about your questions * Can
    Accept as Solution to * comment *.

    @gutijose14

  • The upgrade to Cisco ACS

    Hello.

    I would like to upgrade our current ACS NT Terminalserver edition server to a Win2000 server. Since this upgrade requires a fresh installation (since a direct upgrade from NT 4 TS to w2k is not the best thing to do). My question is, do I have to do to ensure that I can keep my user database active? Is replication the answer? And replication will make a copy of all the different users/groups/routers etc etc. In other words, I'll be able to do this upgrade without too much trouble?

    I speak here of a replication of the database, do not configure replication between servers ACS.

    Here is the doc that will help you to do this

    http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/csnt30/user/AE.htm

  • The upgrade of Cisco 1600 access points

    A customer has Cisco 1600 12 access point and they want to add 3 access points. These access points are autonomous access points and the customer is tired to make individual changes by access points.  I suggested that the new access point be base controller, so my question; These existing access points can be upgraded to LWAPP? Or do need to be replaced? Or this controller one web-based access to existing contact points and be controlled.

    so my question; can these existing access point be upgraded to LWAPP? Or do they need to be replaced?
    Yes, existing AP can be converted into TOUR mode with a recovery image. Here's how you can do it (note that there are several ways) http://mrncciew.com/2012/10/20/lightweight-to-autonomous-conversion/ http://mrncciew.com/2013/12/13/ap-conversion-using-mode-button/ is the good idea to get a WLC (like 2504) to manage in a simple way, rather managing them individually. See below the product bundles available. If this is the case, you will get with license 25AP 2504 for almost for free when you buy 2 x 1702. Make sure that you choose the product of appropriate regulatory AIR-AP1702I-A-WLC HTH Rasika * Pls note all useful responses *.
  • The upgrade to Cisco ACS SE and Remote Agent

    Hello

    Currently we are upgrading the PDC to Windows Server 2008, Standard Edition R2.

    I am little confused with information available for upgrade scenarios. Appearing on the current working versions.

    Cisco ACS SE - version 4.1 Build 23 5 Patch 1

    Cisco ACS Remote Agent version 4.2 (0.124)

    The new operating system will work on 64-bit, I think that the current ACE SE and the remote agent can / must be upgraded.

    My existing versions, give the possible scenarios of upgrade available for me. After that upgraded SE and Remote Agent should work for the 64 bit OS.

    Thanks in advance!

    Yes, it is not possible to upgrade the ACS ACS 5.2 existing to level 4.1. They are two different boxes run on a different platform.

    Unfortunately ACS 4.x does not support windows 2008 r2.

    5.2 ACS is the only option left, and you will need to buy a new box of seprate with the new licnese for this.

    Concerning

    Bellefroid

    Note the useful messages

  • The upgrade of Cisco IDS 4235

    Currently, we are conducting 5.1.3 GIS 257. I know I'm behind and want to also include DST updates. If I switch to 5.1.4 or 5.1.5 What is the version that I will need to upgrade to these Service Packs? 5.1.3's 257 enough?

    Thank you

    Dwane

    You can go to 5.1. (5) .. minimum required for this upgrade is 5.0 (1) for users of CLI and IDM. This Service Pack includes the update of the Signature S272. With regard to the IDS/IPS devices, its always preferable to run on the latest versions.

    Kind regards

    Maryse.

  • matching codec c40 with ISDN link problem

    Hello world

    Would really appreciate if someone can help me with my problem.

    I have 2 sites. Each site has a c40 codec which is connected to a cisco ISDN link box. Each box contains 3 BRI connections. The system is essentially set up at the video-conference from one site to the other. C40 codecs have been paired with boxes of ISDN link manually due to the old firmware. Now that the firmware has been upgraded on all devices, I am trying to pair the codec with the ISDN link using the 'auto' mode so I can configure the ISDN codec c40 GUI link.

    The problem I have is that when I pair it in auto mode, the ISDN link is seen by the codec and matched succesffuly but I get an "error" and the reason for the error is "no sip registered to peripheral H320" or something of the sort. The rest of the configuration is the same, all im doing is pairing in auto mode. At this point, I can't do a video call-out. Can I make changes to the GUI hoewever c40 ISDN link and it shows as paired.

    When I change the sip profile out to 'off' in the sip codec c40 profile settings, now, there is no error. The sip profile in the ISDN link area is also set to off.

    Can someone help me what are the correct settings for outgoing SIP and the above error message please. It will be greatly appreciated.

    Thank you

    Hello

    Outgoing SIP should be turned off if you use the ISDN codec liaison, so please meke it took off.

    for the composition, should not use composition commnad complex that you scoop with TC 5.x and IT 1.0,

    With TC 6.x just enter number and select protocol H320.

    HTH

    Kind regards

    Dharmmesh

  • Failure of SQL database during the upgrade (13.0.2-> 13.1.1) MSDS

    Hello

    Someone had problems with the TMS 13.0.2 to 13.1.1 upgrade that installation fails to put SQL server level?

    My server is now at the stage where I can't install the upgrade or re-install v13.0.2.

    Thank you

    David

    Strange, I've marked this bug as a 'visible customer' a week ago. I know that it can take a day or two before, it can actually be displayed by partners/clients, but it shouldn't take a week.

    In general, mark us (at least in the world of Cisco TMS) all new bugs as a 'visible customer '. However, not all bugs old Tandberg bug tracking system have been replicated to CDETS yet, that's why you sometimes see bugs which are not visible in the Bug Toolkit.

    It's the RNE for CSCtt19457:

    ----

    Symptoms

    The upgrade of Cisco TMS to the version 13.1 or 13.1.1 fails. The Databaselog.txt file shows a timeout in SQL Server:

    2011-10 - 03T 15: 37:53 to execute SQL block 1349, starting at line 30465

    2011-10 - 03T 15: 38:39 error in UpgradeDatabase unhandled

    2011-10 - 03T 15: 38:39 timeout has expired.  The delay before the end of the operation or the server is not responding.

    2011-10 - 03T 15: 38:39 at System.Data.SqlClient.SqlConnection.OnError (SqlException exception, Boolean breakConnection)

    Conditions

    The issue was seen in facilities at TMS using SQL Server 2008 and occurs when the stored procedure "NET_Utility_CheckForAccessCopyPasteErrors" is installed. Installation it would normally take about one millisecond, but when this occurs, it takes more than 20 seconds.

    Workaround

    Upgrade SQL Server to the latest service pack and run Setup again. If the SQL code is already on the latest service pack, restart the SQL Server service.

  • When I try to install the upgrade of the software real player says I need, he says that there is no installed: 246 encoder and not enough disk space

    no installed: 246 encoder

    When I try to install the upgrade of the software real player says I need, it is said that there are no H 246 encoder installed and not enough disk space, even if I removed several programs releasing upward (I hope) a generous amount of disk space. I have a Toshiba satellite P105-S6124 2006.

    Hello

    ·         The question is limited only with Real Player?

    Method 1:

    You can try running Disk Cleanup in Windows XP, which will safely remove unused files from the computer and check if that tool:

    Description of the tool in Windows XP disk cleanup

    http://support.Microsoft.com/kb/310312

    Method 2:

    You can try to install the latest codec pack from the Web site by using one of your favorite search engines and check if it helps:

    With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

    See also:

    http://www.Microsoft.com/download/en/details.aspx?ID=507

    Method 3:

    If the problem is specific to Real Player, you can try to uninstall ad reinstalling the program and check if it helps.

    How to change or Remove a program in Windows XP

  • Is the complete software reinstallation required after the upgrade to Windows 10

    People,

    I have Win 7 Professional and opted for the upgrade to Windows 10. I have a number of licensed, like MS Office software, complete Suite Adobe and Autodesk software, for which I have no media or installation Setup files.

    My question is after upgrade, I have to reinstall everything on my machine or all these software installations will be kept? Because I lost track of the installation for all these software media, it will be very expensive for me to buy everything new. App 'Get Windows 10' has not reported any of this software.

    This was one of the main reasons I couldn't move to Windows 8, reinstall all of these software are unaffordable for me.

    I'd appreciate any help on this matter.

    Thank you

    SID

    NO.

    The upgrade to Windows 7 or later will preserve my personal files, applications, and settings?

    Yes, the upgrade to Windows 7 or a later version will keep your files staff, settings, and applications.

    Backing up your computer:
    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    Also check:

    How to: build 10 tips before installing the latest version of Windows 10

    How to: 10 things to do if the Windows 10 install fails.

    Once you have installed these important updates and followed the required steps, you should be ready to receive your free Windows 10 update this summer.

  • After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault. Any ideas to fix this?

    After the upgrade yesterday from Vista to Windows 7, now my Cisco VPN does not work and I get an error message titled: grounds 440 driver fault.  Any ideas to fix this?

    This was the solution!  The works of vpn as $ 1 million now.  I followed the instructions above to enter the uninstall program and selecting the repair option.  I rebooted the machine, then used the troubleshooting on vpn software compatibility option.  Selected Windows windows xp (service pack 2) as the correct software and cisco vpn client started right up.

    Thanks, Nick!

    Rick

  • The upgrade to ESXi 4.1 with storage iSCSI software to ESXi 5.5

    I intend to upgrade ESXi 4.1 with which I have attached to ESXi 5.5 iSCSI software storage

    I've updated all my guests who were on the SAN storage with no problems.

    I would like to know that if it there's nothing I should take care before I update the host connected iSCSI to ESXi 5.5, as for the hosts with SAN attached storage I made to remove the cables of SAN before upgrading the host.

    Also, if all known problems, you will be informed during the upgrade to ESXi 4.1 to ESXi 5.5 with iSCSI Software storage, please let me know?

    If there is no different process to upgrade coz in ESXi 4.1 I do not see this link ports of iSCSI vmkernel ports software iSCSI but I know in ESXi5.5 we have to or I just launch a procedure of standard upgrade via the Update Manager and everything will be taken care?

    Thanks in advance

    With ESXi prior to version 5, linking ports had to be done via command line. However, if it has been configured correctly, you should be able to upgrade to ESXi 5.5 (assuming that the host has not been previously updated since version 3). BTW. the last time that I disconnected the host of storage for an upgrade has been with ESX 3.0.

    André

  • Since the upgrade to 11.0.11, document relative cross links when viewing the PDF in the browser don't work is no longer

    I maintain a web application that contains hundreds of PDF files that contain relative links, among other documents.  The application relies on getting the Base URL of the Adobe Acrobat web plug-in to navigate between different PDF documents while viewing in the browser (the links do not work in a standalone Acrobat window).  Since the upgrade to Adobe Acrobat Reader 11.0.11 last week, these links no longer function (I checked they still work in 11.0.10).  I also have the same problem in Acrobat 10.1.14 (worked in 10.1.13).  I have tried all the other versions.  It seems that updates broke the functionality of our application invoked for the past ten years.  Any help would be greatly appreciated.

    It is a change that seems to work for Adobe Reader 11.0.11 but I can't find any documentation / web post of what he does.

    One would have details of these entries to registry FeatureState?

    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\11.0\FeatureState

    3836776 = DWORD: 00000000

    I also have Internet< display="" in="" read="" mode="" by="" default="" disabled="">

    HKCU\Software\Adobe\Acrobat Reader\11.0\AVGeneral

    bBrowserDisplayInReadMode = DWORD: 00000000

    For 10.1.14 I found that follows would work, but same as above no documentation or approval from Adobe.

    HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Adobe\Acrobat Reader\10.0\FeatureState

    3836774 = DWORD: 00000000

  • I have 5 Lightroom, how to switch to Lightroom 6? Is there a price for the upgrade or do I have to buy all of the 6 Lightroom? What are the links?

    I have 5 Lightroom, how to switch to Lightroom 6? Is there a price for the upgrade or do I have to buy all of the 6 Lightroom? What are the links?

    Lightroom 6 updates can be purchased directly from Adobe, for a price of $79.  A link to the corresponding page on their website is less than

    https://www.Adobe.com/products/catalog/software._sl_id-contentfilter_sl_catalog_sl_softwar e_sl_mostpopular.html? promoid = KLXMI

    Lightroom is also available as part of the "Creative cloud photography Plan" for a monthly subscription of $9.99.  This includes Lightroom CC, Mobile with Lightroom and Photoshop CC.

    https://www.Adobe.com/creativecloud/photography.html

  • Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps.

    Since the upgrade to ios 9.3 on my iphone 6, links in the email and SMS are not working and freeze the apps. If anyone has had this problem and if yes, how do solve you this problem?

    There has been a number of similar reports. See also http://osxdaily.com/2016/03/25/troubleshooting-ios-9-3-update-problems/

Maybe you are looking for