the upgrade of IPS chains, ASA-SSM - 10 module

Similar Questions

• Upgrade path 5500 series ASA-SSM-10

  Can anyone provide the proper for the 5500 series ASA-SSM-10 upgrade path of

  6.0 (5) E2

  TO

  7.1 (10) E4

  The release notes state that you must run just least 6,0000 e4 could so I just spend 6,0000 E4 5,0000 E2 then directly to 7.1 (10) E4?

  Also, the SSM-10 is able to effectively run the 7.1 (10) E4?

  Hello

  Yes, you can directly upgrade 6.0.5E2 to 6.0.6 E4 and then directly to version 7.1. (10) E4. After the upgrade for the latter, you might even go to latest available patch as well.

  -Yes, SSM1 - is able to effectively execute the 7.1.0E4.

  Kind regards

  Akshay Rouanet

• IPS on ASA 5505 test modules

  How all you check traffic IPS on the AIP SSC5 in a 5505, because the default signatures are retired and you can't the fights, we can't activate 2000-2012 on the 5505 signatures.

  Look at the web-signatures. There are a couple of them that shoudn't be retired. Such as directory traversal attacks or access to cmd.exe. These can be easily verified in a browser or with a like nessus vulnerability scanner.

• 20 IPS ASA - SSM password reset

  Hi all

  Must reset/recover the password to get rid, for some reason, we lost the password for the IPS 20 ASA - SSM module

  Please let us know the procedure that the reset of password hw-module command does not work.

  Use the reset passwrod hw-module command, you must have ASA 7.2.2 or later version.

• ASA-SSM-10 improvement no license or signatures

  I successfully upgraded our ASA-5510 with the latest version of the software.

  Our IPS module however ASA-SSM-10 seems to be the settings to factory default with only an IP address that is configured without any permission or certificates. The ASA-SSM-10 module can be improved with the lack of licenses or certificates? In addition, by using PuTTY I am able to connect to the ASA-SSM-10 module and ping the module and my laptop that I have connected via the management port. I am unable to ping from the laptop to the module of ASA-SSM-10 well.

  Continuing the investigation in addition to the configuration of the management port IP address there is no VLAN, GW, image url or ip address of the configured port. Is there a simple way to upgrade the software on the ASA-SSM-10 without affecting our two ASA - 5510 that are configured for failover?

  I suppose I can do up to a VLAN, GW and port address to get my cell phone to ping to the ASA-SSM-10 module to upgrade without affecting our ASA-5510 that are configured for failover. ***

  You can attach more licenses for the legacy IPS until April 26. But the question is whether it is worth spending time and money in the present. The IPS legacy is dead and you should focus on firepower for IPS. But who does not work on your hardware.

• How to update the Signature of IPS

  Can someone help me with the steps in the upgrade of the signature of the IPS for ASA SSM - 20, IDS 4215 platform, WV-SVC-JOINT-2 via IDM and EMI. All sensors are already upgraded with signature S480 with engine E4.

  Can I upgrade the signature directly from S480 S507? Please let me know the file I need to download. Is there an impact by updating the signture as reboot?

  The steps to upgrade signatures via IDM/IME are listed in this document:

  https://supportforums.Cisco.com/docs/doc-12212

  Yes, you can upgrade to S507 S480

  Links to the correct files are also in the above document.  The IPS should not restart the upgrade.

  Good luck!

• Equivalent to show disk0: ASA-SSM-10

  Hi, are you able to see the contents of the disc on an ASA-SSM-10 module? As the show disk0: command on my 5510? I know that it is an internal flash drive... Is that where the image files and configuration and software? Can we see these files and copy them to TFTP server?

  See you soon

  Phil

  Hi Philippe,.

  You can view this content through the service of IPS account. The downside is that you can access only with the supervision of TAC. If you want to see the configuration you can do a show config; If you want to see what version you are using you can do this through the show version command.

  HTH

  Luis Silva

  "If you need IDP (planning, design, implementation) assistance do not hesitate to contact us.

  http://www.Cisco.com/Web/partners/tools/pdihd.html

• ASA-SSM-20/40 IPS Software upgrade quesiton

  I'm looking to upgrade the IPS modules (ASA-SSM-20 and ASA-SSM-40) on two different ASA to ver 7.1 (11) E4 under this field notice:

  http://www.Cisco.com/c/en/us/support/docs/field-notices/640/fn64080.html

  My question is around if traffic through the firewall is affected during this update and subsequent restart of the IPS module.

  On the ASAs, a service policy is in place that will allow the traffic in the case where the IPS module becomes unavailable.  It comes, it will actually happen during the update?

  Suggestions and comments are welcome.

  Thanks in advance.

  John

  If your IPS is inline and as a whole do not open then the traffic through the ASA (in assuming an ASA standalone and do not form part of a pair of HA) will not be affected when the service IPS module reload.

  If an SAA is in a pair of HA and a service (ips, cxsc, or sfr) module fails, it will be by default triggers a failover event. (ASA 9.5 introduces the possibility to change this behavior.) The result is the same - no service interruption (Although TCP connections may need to restore if you have not configured stateful failover).

• Ssm - 20 upgrade: cisco ips canceled upgrade because...

  Hi all

  I have upgraded our ASA 55402 with SSM-20 modules.

  Upgrading a module version 7.0000 E4 to of 6,0000 E4 everything went well.

  However, the other returned the following error when you try to upgrade the image and recovery partition:

  -cisco ips update cancelled because another upgrade or downgrade is underway

  The firewall that I intend to do the upgrade is passive.

  Firmware ASA: v9.1.1.

  Search Internet and this forum.

  Everyone fell on this?

  Thanx

  Jaap

  "Reset the hw-module module 1' it cause no problems at all.

• Update license of IPS ASA - SSM

  Hello

  We have an ASA-SSM-20 IPS, the license has expired and we purchased a Smartnet contract for the device.

  I would like to know how to upgrade the license.

  We tried to do the ASDM, and chose the option updates to cisco.com.we got the following error.

  internal error. Unable to send the license request. -4: unable to proxy transparent tunnel. Proxy returns "HTTP/1.1 403 Forbidden.

  How to solve this problem or how to do when you use the other option, how to get the license file.

  Best regards

  It seems that your AIP-SSM20 is configured to use an http proxy to connect to the Internet. If you allow the IP address of the AIP-SSM20 management in your web proxy, it may solve your problem.

  If this isn't the issue, you can always apply a license manually. Download your license file here:

  https://Tools.Cisco.com/swift/LicensingUI/home

  and apply via the ASDM or the CLI

  -Bob

• recharge an ASA - SSM the firewall itself effect?

  We lost the connection information for the IPS - SSM on our ASA 5520. It seems we should re image module with a version more recent software. It is currently not in use i.e. no rules for it on the firewall. This process will take the firewall offline at all?

  Sh command output:

  See the module of Firewall03 # 1

  Model serial number of map mod

  --- -------------------------------------------- ------------------ -----------

  1 ASA 5500 Series Security Services Module-20 ASA-SSM-20 xxxxxxx

  MAC mod Fw Sw Version Version Version Hw address range

  --- --------------------------------- ------------ ------------ ---------------

  1 001b.0ce2.xxxx to 001b.0ce2.xxxx 1.0 1.0 (11) 2 5,0000 E1

  The Application name of the SSM status Version of the Application of SSM mod

  --- ------------------------------ ---------------- --------------------------

  1 FPS up to 5.1 (5) E1

  Data on the State of mod aircraft compatibility status

  --- ------------------ --------------------- -------------

  1 up Up

  Firewall03 # display module 1 recover

  Module 1 retrieve parameters...

  Start the recovery Image: No.

  Image URL:ftp://0.0.0.0/ t

  Port IP address: 0.0.0.0

  IP gateway address: 0.0.0.0

  VLAN ID: 0

  No, it should not affect the operation of the firewall at all. He would suffer only if you use it inline with firm failure mode is activated.

• IPS Signature DataBase - ASA IPS/IOS IPS/IPS 42xx/AIP-SSM

  Hello

  Can someone briefly tell me the details of database signature (number of Signature) among the following devices

  --> ASA IPS/IOS IPS/IPS 42xx/AIP-SSM.

  Thank you

  IPS on ASA/PIX = signatures only 50 or so common

  Module AIP - SSM is same signatures as the Cisco 4200 series sensors. Few minor differences exist (such as signature support IPv6 etc.)

  Please rate if useful.

  Concerning

  Farrukh

• ASA-SSM-20 on the active failover configuration

  You can synchronize configuration between two IPS systems data?

  I have two ASA-SSM-20 (6.1.1 E3) one in each of my the SAA. Of the SAA is the shift in assets. During the configuration of the IPS module I always make these same changes also in the standby unit. Is it possible to synchronize to the top of these two survey periods, so when it is configured the other is updated?

  Thank you very much

  Unlike the SAA, there not an automatic function to preserve the configuration synchronization through SSMs 2.

  A few options:

  You can use the command copy to copy the configuration of a sensor to a ftp/scp server.

  Then use the copy on the second sensor command to copy the configuration on the second sensor. During the copy, it will ask whether to change the IP of the probe to what is in the configuration file. You will need to tell it to NOT change IP of the probe, otherwise you end up with 2 SSMs with the same IP address and are struggling to connect to them.

  Another option is to use the CSM. CSM has configuration that applies to simple sensors, but also the group configuration that can be applied across multiple sensors.

  If you have used the group configuration, then you could make one change to the configuration of the Group and apply it in all the sensors in the Group (you will place your SSMs 2 in the same group).

• Recording capacity for ASA firewall using ASA-SSM-20 IPS module.

  Hello

  Please could someone give some tips on how to get the ASA-SSM-20 to record information about something like Kiwi Syslog services etc. We just need to get the IPS alerts to generate the SMS/email feature to alert the various intervention teams.

  Thank you

  unfortantely, no syslog support

  http://www.Cisco.com/en/us/products/ps6120/products_configuration_example09186a00807335ca.shtml

  You can configure rules to send snmp traps, and you can pull events using CETS, IPS Manager Express and Cisco.

  If you have logging enabled on the ASA a syslog msg appears when the IPS is asking or blocking traffic.

  Here is a link to IPS configuration guides

  http://www.Cisco.com/en/us/products/HW/vpndevc/PS4077/tsd_products_support_configure.html

• SSM - ips on asa

  2 asa with module ips is in place in our centres. one of the modules in them seem is not present.
  However the two s ACLs for ips on primary & secondary the asa have hitcnts increases.
  These have been set up by one of my previous colleagues and I am not exposed to things ips.
  Appreciate if someone can help me understand why the acl shows hits in asa with no actually present ips & it saves at the present time, if yes how to find them.

  I would like to configure IP addresses entirely in the asa elementary school and see its results. Please tell us how this can be done with
  all orders to check the configuration, or what else should be configured.

  Primary FW:

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------
  1 IPS 2.0000 does not apply S240.0

  chk - Ips access-list extended permit ip any a (hitcnt = 2945667)

  ++++++++++++++++++++

  Secondary FW:

  The Application name of the SSM status Version of the Application of SSM mod
  --- ------------------------------ ---------------- --------------------------

  chk - Ips access-list extended permit ip any a (hitcnt = 1984842)

  Hello

  The switch still works fine because that IPS modules on both the ASAs are "down". In addition, on the secondary if you see hit acl number increasing, there is no packets redirected to IPS modules, as seen in 'show service-policy '.

  I don't know why the output of "show the modu" doesn't show any IPS module if we can see in 'show failover' and «modu 1 det» It seems that the IPS in the ASA high school has no images installed on it. Try to put back in place and re-imaging IPS module on the secondary and primary school and see if this helps to raise the status.

  http://www.Cisco.com/en/us/docs/security/IPS/7.0/Configuration/Guide/CLI/cli_system_images.html#wp1230355

  Thank you and best regards,

  Assia