the upgrade of my laptop

Similar Questions

• After completing the upgrade Windows 7 laptop does not start

  A ran the Windows 7 upgrade on a new laptop Sony Vaio with Windows Vista. After installation is complete laptop ran fine for 2 days.

  Necessary to restart after trying to connect a new printer. Stop the laptop normally, but after a reboot would only boot to Windows Boot Manager.

  The problem is that the upgrade of Windows CD I have is not start even if the DVD has been the first priority in the boot sequence.

  If you are somehow able to boot from the installation DVD:

  1. Insert the DVD of Windows 7 and restart your computer
  2 boot from the DVD.
  3. choose your language and click Next.
  4. click on command prompt and try the following commands (they may or may not work):

  Bootrec /fixMBR
  Bootrec /fixBoot
  Bootrec /rebuildBCD
  Bootrec /scanOS

  Questions about installing Windows 7? Read this:
  FAQ - Frequently Asked Questions from Installation Windows 7 & responses

• HP pavilion 15: the upgrade of my laptops to 16 GB (RAM) memory

  I need to add more ram (16 GB) to my laptop but do not know if my motherboard will support it.

  Here are my some specifications of my laptop

  Ocurrent system
  Windows 8 64-bit language

  CENTRAL PROCESSING UNIT

  Intel Core i7 3632QM 2.20 GHz 49 ° c.
  Ivy Bridge 22nm technology

  RAM
  4.00 GB Single-Channel DDR3 @ 798 MHz (11-11-11-28)

  Motherboard
  Hewlett-Packard 1970 (U3E1) 52 ° c.

  Graphics
  Monitor generic PnP (1366x768@60Hz)
  Graphics Intel HD 4000 (HP)
  2048MB ATI Radeon HD 8670M (HP)

  Go and look for this RAM card

  Specifications:

  Series

  GSKILL Ripjaws SO-DIMM

  Memory

  Type DDR3L

  Form factor

  SO-DIMM

  Channel config

  Two-channel

  Capacity

  16GB (8GBx2)

  Speed test

  2133 MHz

  Latency CASE

  11-11-11-31

  Voltage

  1.35V

  Heatsink

  NO.

  Please help me, thanks!

  Here is your manual:

  Manual

  See page 53.

  On page 4 it says that it can take 8 GB.

  This is the part number for the official module 8 GB:

  693374 001

  

  It is a low density (8 blocks of memory on the module) DDR3L-1600 1.35 volts SO-DIMM memory.

  If that's what you are looking at:

  http://www.Newegg.com/product/product.aspx?item=N82E16820231704

  It will work, but I fear that the manual says that the max is a single module of 8 GB.  The good thing is that your laptop has an easy access to the ememory Panel so it is quite easy to upgrade.

  I like to think 2 x 8 GB will work but can not guarantee it.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Replace the drive of my laptop in a Toshiba Satellite 5100/5105 - experience?

  I intend to replace the defective CDRW/DVD drive in my Toshiba Satellite 5100 503 (European version, it was sold as 5105 in the United States and other countries).
  The disk is a UJDA730.
  Update, I consider the much appreciated a Slimline DVD +/-RW drive. Unfortunately, some internet research revealed that the upgrade to optical laptop drive is not as simple as one would hope. I had no trouble to remove my old drive (just remove the keyboard and unscrew the two screws), so I consider myself to be able to put in a new drive instead. However, two problems remain:

  -mechanical compatibility: the 6500 has seems to have a different layout of collar. The eject button and the LED are in a different position from that of my current drive, so I doubt I'll be able to use my old glasses with it. In addition, the bezel from my old drive has a niche in the lower right corner (similar to that found on some laptop computers Fujitsu-Siemens), which gives place to the volume control on the laptop. So I can't reuse the old bezel and bezel of the NEC will probably not allow me to close the CD tray. I wonder if some Dremel work on the plastic parts of the NEC drive will allow me to physically. Anyone who has tried?

  -electronic compatibility: computer laptop drives don't usually have jumpers to change their configuration of master/slave/cable selection. Instead it is located in the firmware, change so it is flashing a new firmware, which is not easy to find and hard to do if your drive is still not recognized. SO I need to know if my notebooks is the optical drive set to master, slave. CSEL or 'inverse cable select. " Can someone help me here, either by own experience pointing me to a relevant source on the web?

  Hello

  as a first step in a Satellite 5100 CD player is fixed mounted and can only be replaced with the same model! Another model might work, but as you can see the bezel fits and maybe the new drive does not match 100%. So you will have problems all the way!

  What do you think about an external solution via USB or Firewire. It's the best way to upgrade!

  To bye chris

• The upgrade on Pavilion 9667ea hard drive to SSD

  I think the upgrade my computer laptop 9667ea Pavilion by replacing the first hard drive of 160 GB with an SSD, as the Cruicial M500 240 GB SATA 111, or similar.

  Could you tell me if there are problems in doing this, because I see no other posted messages it may be according to the model of your laptop?

  I advanced and bought the SSD (Samsung 840 EVO 250 GB), which has been installed on the HP Pavilion dv9667ea. Everything went well and I used the Samsung software cloning with the SSD drive (I backed up the C drive beforehand). I have power and data cables, so I need just the package base. The new 250 GB SSD drive replaces the original 160 GB hard drive, I decided to take out the other drive so hard 160 GB. The laptop is much faster at startup and is also faster by using the programs on the laptop. As there are now no hard drives on the laptop, there is now virtually no fan noise, which was inconvenient.

  Thank you for your advice.

• HP pavilion 15-p263ca: I can upgrade the CPU in my laptop, or is he doomed to have speeds(1.9-2.4gHz) low overclocking forever?

  I want to upgrade the CPU on my laptop, but I don't know if this is possible or where to look to see if there is. This is hp Pavilion p263ca 15.

  Processor AMD A10 is an APU, which means it's a graphic processor/card combination.

  I believe that you are at the top of the mark on the hardware configuration of your model series.

  Unfortunately, I do not know how the processor works.

  Without a doubt, it's automatic and no user intervention is necessary or possible.

• Cannot find my model of laptop on the upgrade DVD Toshiba

  Today I received my upgrade DVD. I ordered the upgrade on the European site of upgrade kit, and my laptop is purshased European in Sweden. My laptop model is L550D-10J corresponing to PSLP8E which does not exist on the list. ? The closest I get is L550D PSLNJE and PSLNSE L550
  What should I do?
  Thank you.

  I don't know if this has nothing to do with the problem but I had updated to the latest version of the Bios.

  Upgrader is right. Just choose PSLNSE and everything will be OK.
  http://forums.computers.Toshiba-Europe.com/forums//message.jspa?MessageID=184484

• 14 - n001TX: HP laptop shutdown properly after the upgrade to windows 10.

  After that I have upgraded my computer laptop 14-n001TX HP for windows 10, is not shut down properly. It propely to stop after 5-10 minutes, but is not shutdown properly after working more than 50 minutes-1 hour.  When I stop the laptop, the screen turns off but fan, the led power and seeing the "f12" key not turn off.

  Then I went to Power Options > choose the power button > change settings that are currently unavailable > UNCHECKED enable fast start. But still the problem was not resolved.  In addition to "sleep" mode in my laptop is not working properly. When I go to display mode standby turns off and rest works. But the laptop wakes again if I press a key. At this time I have to press and hold the power button until the laptop stops. I do the same thing when my laptop is not shut down properly.

  (This occurs even in windows 8.1). What is the solution for this problem?

  Hello

  Try the following.

  Open settings and select System.  Select food and sleep, and then click additional power settings - in the next window, click on "Choose what the power button" in the left pane.

  In the next window, click on "Change settings that are currently unavailable" (close), then Remove the check mark from the box against 'Turn on a quick start (recommended) '.  Click on the button Save the settings, and then close the open windows and restart the laptop.

  When windows has reloaded, download the driver directly from Intel IMEI on the following link, unzip the and run the installer.

  https://Downloadcenter.Intel.com/download/26127/Intel-management-engine-consumer-driver-for-Intel-nu...

  Once the installation is complete, restart the laptop.

  When the machine rebooted, re - activate the quick start and restart the computer once more - let Windows take over completely for a few minutes before checking.

  Kind regards

  DP - K

• The Compaq Presario 2100 laptop SSD upgrade

  I have a laptop Compaq Presario 2100 it was brand new in 2003. I have a newer laptop, but a train trying to upgrade the Presario 2100 as much as possible. This is the kind of a project now and I also want to get as much as possible out of it. I heard that SSDS are super fast and would improve performance a bit. Anyone did the upgrade to an SSD for their Persario 2100 notebook PC series already? All entries are appreciated, in particular information about the product that was used for the upgrade. If no one did, so nobody knows if it is possible to upgrade the Presario 2100 series laptop PC to an SSD?

  Thank you

  Huck

  Believe it or not, the maintenance manual is always available.

  Manual

  The Presario 2100 uses old school PATA (EIDE) hard disks that are different from those of the SSD SATA see you more often on the market. However, there is a PATA SSD. They cost a bit more per concert, of course. I put a PATA SSD in a laptop on the same vintage as the Presario 2100 and it does significantly improve start-up time and overall performance, but talk about the proverbial earrings on a pig!

  This is a 64 GB SSD PATA that would be perfect for the Presario 2100, but $ 90:

  http://www.Newegg.com/product/product.aspx?item=N82E16820208893

  On eBay you will probably find 32 gig for a little less versions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion x 360: tour of laptop computer during the upgrade to Windows 10 stuck on the hp logo

  I was upgrading the laptop for Windows 10 and after that it restarted, it got stuck on the logo of hp for about 30 min. I turned it off about 3 times and it is still stuck on the hp logo.

  Once the recovery to Win 8 is completed, considering the upgrade to 10, here are some tips:

  > http://support.hp.com/us-en/document/c05195282

  > http://support.hp.com/us-en/document/c04730900

  Make sure all your drivers are updated before moving to 10 - use HP Support Assistant

  Make sure you that all of your software security (AV, firewall, etc.) is uninstalled before upgrading - reinstall the upgrade of the post.

  If you decide to not upgrade, please note that Win 8/8.1 is good OS and will be supported by Microsoft until the year 2023.

• laptop 15 r002-don't: the upgrade of processor

  Please I am looking for an upgrade of the processor in my laptop Hp 15 PC r002-don't core i5 4210U 1.7 GHz ~ 2.4 GHz. Please help me I have not disassembled my laptop yet so I was in line first...

  Hello
  
  Manual: http://h10032.www1.hp.com/ctg/Manual/c04409502
  
  You cannot upgrade processor, it is attached & unique on its motherboard.
  
  Concerning
  
  Visruth

• HP DV7-3063cl laptop PC: what is the maximum temperature for safe operation of the DV7 3063 cl with the upgrade of the 640 M CPU?

  I have recently restored a HP DV7 3063 cl laptop that died a hot mother (MB). I replaced the MB with a new Board of Directors of HP when the price has been reduced to $100, updated the CPU with an announced as new AMD 640 M and applied Arctic Silver on CPU and graphics chips. I put in 4 G memory cool, got the computer to work and installed Windows 10.

  The computer seems to run very hot and stopped twice from overheating during its first period of 2 weeks when it there was not a lot of calculating, fan was run at top speed at all times, and the laptop was high to allow good airflow below.

  According to the program of the Open Hardware Monitor, the CPU had reached 97-99 C a few times. I bought support cooling a player and that seems to help a lot, dropping the temperature to 20 ° C.

  What is the maximum temperature for safe operation of the DV7 with the upgrade of the 640 M CPU?

  Anything more than 90 c is too hot. You can specify the processor and the motherboard you have installed?

  Also if this from the Manual:

  Thermal paste is used on 1 CPU and heat sink section 2 that the services it. Thermal pads are used on the chip Northbridge 3 and 4, the graphical subsystem chip 5 contact Northbridge and graphics/heatsink contact 6. Thermal material replacement is included with all kits of spare parts of processor, heatsink and system board.

  So unless you have changed the cooling system to heat composed on the chip graphic you should have used a thermal buffer. Without the pad, it may leave just a small hallway and destroy the cooling properties. You can use a shim in copper or other piece of something metal to fill the void, but if you just put the heat sink down on the video chip you won't get optimal even with thermal cooling paste.

• Upgrade the memory for computer laptop 15-d017cl HP

  What is the maximum RAM upgrade for my laptop HP 15-d017cl.  I understand there is not only one slot and standard is 4 GB.  I think I can go up to 8 GB with a module upgrade.

  SkinnyKid wrote:

  What is the maximum RAM upgrade for my laptop HP 15-d017cl.  I understand there is not only one slot and standard is 4 GB.  I think I can go up to 8 GB with a module upgrade.

  Yes, 8 GB (1600 MHz DDR3L) is the maximum with one location.

• can I upgrade the CPU in my laptop

  can I upgrade the CPU in my laptop HP 2000-2d03tu. If yes than Please publish the list of processors. Thanks in advance

  Core 2 Duo is old technology. In the list in the post above, you can install the versions 'budget' of the Intel Core processors (i3, etc.). The Pentium 2030 M is the fastest at 2.5 ghz, but I couldn't find one for sale online. It is roughly equal to an i3 - 3120 m.

• Pavilion n201ax: upgrading the GPU, the CPU and the RAM of my laptop n201ax

  Maybe it's a very long post, but please answer because I really need answers to each of these questions and I really want to upgrade my laptop to the best configuration, if I CAN.

  Let me make this clear first.

  * In the next contained the words 'this portable' always refers to Hp Pavilion 15-n201ax *.
  Good then everything first I read somewhere that the maximum Ram of this laptop can be expanded up to 16 GB, but i came up with this link here-

  http://h30434.www3.HP.com/T5/hardware-upgrades-replacements/I-would-like-to-upgrade-memory-of-my-lap...

  And then I came to know that it can only be upgraded to 12 GB page chapter 1 Description this Guide - #2

  http://h10032.www1.HP.com/CTG/manual/c04438537.PDF

  First of all I would like to ask, is that,

  1. can I buy a RAM of any brand but the same 1600 mhz clock speed ofc IE?, then can I go to the GSkill 1600 Mhz DDR3 4 GB of ram?

  2. the size matter for respective locations? or I can install the 8 GB and 4 GB of ram in any other slots?

  So this was all about the RAM

  But I need to know if I can change the discrete GPU and the APU of this laptop

  3 and if yes - which are compatible mobile GPU that I can install by removing the previous one ie AMD 8600 M (for example graphics R9, R7 and R5 for laptop)

  4 and who are the compatible APU I can install by removing the APU previous IE AMD APU A10 - 4655 M (for example the AMD FX APU for laptops)

  5. If I can upgrade the GPU and APU both please tell makes compatibility issues? as only a specific GPU can work with a specific APU IE as in this laptop AMD APU A10 - 4655M + AMD 8600 M GPU.

  Please help me, please.

  Thanks in advance.

  Pavilion 15-n201ax?

  We may need to refer to the owner's manual here:

  Your repair manuals

  Officially, it supports only 12 concerts. Your model has a single module of 8 GB if you have an open slot. Unofficially, users here can have reported that add another 8 GB for a total of 16 concerts will work fine. It's something you take the risk of making but it is not official.

  The part numbers for the appropriate memory are listed on page 42. You must DDR3L-1600 SO-DIMM.

  If you want to go formal, the 4 GB module is: 691740-001

  Is this on amazon.com:

  http://www.Amazon.com/HP-691740-001-1600MHz-PC3L-12800-memory/DP/B00CI08FX4/ref=sr_1_1?ie=UTF8&QID=1437948185&SR=8-1&keywords=691740-001

  You just leave the concert 8 where it is and add the new memory into the open slot.

  On your laptop model, the GPU/APU is soldered to the motherboard. In order to make any upgrade, you will need to buy a new motherboard. You have an idea together wrong GPU/APU can be removed and replaced and this is incorrect. The term APU refers to a processor that has integrated video, so the whole issue on the compatibility between the GPU and APU just missing the mark. On some systems, the GPU/APU is socketed and can be replaced which is used to replace/upgrade the processor and the video function but as stated above, on your this involves pulling and replacing the entire motherboard.

  There is available a little better/graphics processor using AMD A10 - 5745M 8670 M (2.9 GHz/2.1 GHz, 2 GB L2, 1333 MHz DDR3L Quad 25W) for use with Standard Windows. The part of the motherboard is 734824-501

  HP does not store the Council, but I found this line:

  http://www.discounteddealz.com/product.asp?Itemid=327740&gclid=CO78y6rn-cYCFQmCaQodOP0GLQ

  Never heard of this seller and can not be a guarantor, but the price is very reasonable for this Council. I was expecting to be a little more makes me wonder about this seller a little. I would advise to keep what you have. He is very strong for AMD and the upgrade to the Commission on the A10-5745 will result in only a very small increase in performance to a very high cost in money and efforts.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.