The upgrade of Presario SR1210NX

I was looking around for my computer processors, but I don't know exactly how high I can go. I got a Pentium 4 processor. Here are the specs:
SSpec number: SL6WK. Processor speed: 3 GHz. speed of the Bus: 800 MHz.
Bus/Core Ratio: 15. L2 Cache size: 512 KB. L2 Memory Cache speed: 3 GHz
Type of packaging: 478 pins. Manufacturing technology: 0.13 micron. Strengthening base: D1.
CPUID string: 0F29h. thermal design power: 81.9W.
Thermal specifications: 70 ° C.

Can someone tell me if this would completely melt my motherboard, or would I just need to upgrade my fans as well?

Here is your card to motherboard:

http://support.HP.com/us-en/document/c00063244

This processor is not supported by this Council.

According to specifications, your Board of Directors is not supported FSB 800 Mhz to 3 Ghz clock speed.

You need a Pentium 4 Northwood or Willamette (not Prescott)

The front side bus (FSB) should be 400 or 533 MHz

The clock speed may not exceed 2.8 Ghz.

Out of curiosity, do you know what processor you currently have?  You can be near the maximum processor supported, which means that no additional upgrades are worth the money or even possible.  However, there could be other things you can do to give it a bit of a kick of thumb...

Tags: HP Desktops

Similar Questions

  • The upgrade of processor and the graph of Compaq Presario cq42-203au

    Hi guys,.

    I have a Compaq Presario CQ42-203AU with AMD processor and graphics. And what I want to ask is, can I upgrade the processor and graphics of my laptop? If it is possible, what is the maximum and graphic compatible processor for my laptop? I thank very you much for your help in advance.

    Hello Netbuckler,

    I understand that you are interested in upgrading the processor and graphics card on your laptop, is that correct? I will try and provide you with information that needed to get there.

    The processor can be improved in this particular notebook. If you go to page 91 in the maintenance manual , it will give you a list of processors and it will show you the steps to do it yourself. I don't know what your current status of security with this laptop, but if you are still covered the upgrade of the processor warranty this I just want you to be aware.

    Now and then when you're dealing with the graphics card it is soldered to the motherboard if you will not be able to update. If you really want to improve the graphics, as you go through the motherboard. There is a list of those on page 81 in the owner's manual as well.

    If I was helpful, or if you want to say thanks to me trying to help, click on the White Star under my name to give me congratulations. I really appreciate it.

    Please answer as soon as possible.

    Thank you

  • Problem of PC keyboard laptop Compaq Presario CQ60-224NR after the upgrade from Vista to Windows 7

    I have recently upgraded the OS on my laptop PC Compaq Presario CQ60 224NR Vista Service Pack 2 to Windows 7 Home Premium 32 bit Service Pack 1.  I updated the drivers before upgrading and checked for the latest drivers after upgrade also.  After the upgrade, the keyboard of the laptop works only partially when I use a web browser.  This includes IE and Firefox.  Above the QWERTY keys do not work correctly.  If I press one of these keys or SHIFT and one of these keys, the last character, symbol, or space I typed before is repeated instead.  Y at - it a fix for this problem?

    Well, I searched for several hours and found a solution, at least for me I am a customer of Comcast and I installed constant guard.  There is a key logger that is included in the package that it causes the problem.  I uninstalled GuardedID and my problem disappeared.  I hope it works for you.

  • HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

    HI PLZ I WANT TO HELP THE UPGRADE TO SSD ODNT WILL I KNOW IF MY BOARD OF DIRECTORS AND THE CPU SUPPORTS

    MODEL

    Compaq Presario CQ42-372TU computer laptop

    http://h20566.www2.HP.com/portal/site/hpsc/template.page/public/KB/docDisplay/?javax.portlet.begCac=...

    PLZ ANY BODY HELP ME

    You can upgrade to an SSD.

    The simplest method is to use an SSD as the Corsair Force 3 and don't forget that you buy the kit of migration.

    The migration kit comes with cloning software and a usb to SATA power cable that connects again SSD.

    It is recommended that you purchase and SSD that is approximately 256 GB in quality if you can find one that is affordable.

    SSD with migration in a kit options search I did.

  • Notice - the upgrade to Windows 7 after replacing the hard drive

    I am replacing the failed hard drive in my Presario V6305NR & considering the upgrade to 2 GB of Ram.  Should I try to reload Vista or can I switch to a new total installation of Windows 7?

    If the upgrade to Windows 7 is feasible, how & what problems can be expected?

    1-Yes, the next step I would try is remove the card and start once without him.

     

    2 - Yes, there were numerous reports of failure wireless and/or the chip Nvidia dv graphics and v made two or three years before. Unfortunately, most of the people seems to result from the motherboard. There is even an American in effect now colony for many models (US). www.nvidiasettlement.com  

  • The upgrade card NIC to onboard LAN, Windows 7

    Hello everyone. Have a basic question for the upgrade of the Ethernet card or the card NETWORK on my Compaq Presario under W7 Home Premium. Initially, this machine ran Vista. I installed a PCI 3Com NIC {3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)}. Windows Update find the required driver. When this was done I disabled the on-board LAN, this automatically disabled the LAN Boot ROM edge It is advised to disable the onboard LAN or the computer will work without problems with the LAN on board and 3COM PCI card as both enabled. I would appreciate your comments.

    Thank you for your help,

    Oscar Mint

    Model #: CQ5110F

    Product #: NP185AA-ABA

    Serial No.: {removed privacy}

    Software Build #: 93NAv3PrA1

    Service ID #: 101-209

    PCBRAND: Presario

    System model

    Compaq-Presario, NP185AA-ABA CQ5110F
    System serial number: 4CE92313HX
    Case type: Desktop

    Processor a

    Main circuit b

    2.50 GHz AMD Athlon Dual Core 7550
    256 kilobytes main memory cache
    1024 kilobyte secondary memory cache
    memory tertiary cache 2048 KB
    64-bit ready
    Multi-core (2 total)
    Not hyper-thread

    Tip: PEGATRON CORPORATION NARRA5 5.00
    Serial number: MS1C95R63502542
    The bus clock: 200 MHz
    BIOS: Phoenix Technologies, LTD 5.38 20/03/2009

    oscarmint wrote:

    Hello everyone. Have a basic question for the upgrade of the Ethernet card or the card NETWORK on my Compaq Presario under W7 Home Premium. Initially, this machine ran Vista. I installed a PCI 3Com NIC {3Com EtherLink 10/100 PCI TX NIC (3C905B-TX)}. Windows Update find the required driver. When this was done I disabled the on-board LAN, this automatically disabled the LAN Boot ROM edge It is advised to disable the onboard LAN or the computer will work without problems with the LAN on board and 3COM PCI card as both enabled. I would appreciate your comments.

    Thank you for your help,

    Oscar Mint

    Model #: CQ5110F

    Product #: NP185AA-ABA

    Serial No.: {removed privacy}

    Software Build #: 93NAv3PrA1

    Service ID #: 101-209

    PCBRAND: Presario

    System model

    Compaq-Presario, NP185AA-ABA CQ5110F
    System serial number: 4CE92313HX
    Case type: Desktop

    Processor a

    Main circuit b

    2.50 GHz AMD Athlon Dual Core 7550
    256 kilobytes main memory cache
    1024 kilobyte secondary memory cache
    memory tertiary cache 2048 KB
    64-bit ready
    Multi-core (2 total)
    Not hyper-thread

    Tip: PEGATRON CORPORATION NARRA5 5.00
    Serial number: MS1C95R63502542
    The bus clock: 200 MHz
    BIOS: Phoenix Technologies, LTD 5.38 20/03/2009

  • Compaq Presario CQ57-445EQ: recovery of the BIOS Compaq Presario CQ57 445EQ

    So I got this Compaq Presario CQ57-445EQ with Windows 7 and 4 GB of ram. Last night I tried to upgrade the BIOS of the first version (2008) to the last (2015) and he got bricks. During the upgrade, it got stuck for 30 minutes and I had to reboot. Now it is black screen, caps lock shift will blink twice every 2 seconds. I tried to recover from USB with sp55356 and sp64612 but no luck.

    I should mention that Win + B, Fn + B, Fn + Esc combinations is not the tone of the laptop, but it shows a USB activity.

    What can I do? Bios versions are .fd files.

    Thanks in advance!

    Not that I know of.

    You may need to purchase recovery media usb to your laptop to HP or HP partner.

    http://h10025.www1.HP.com/ewfrf/wc/CLC?tmp_showAll=false&'destPage = document & cc = us & dlc = en & docname = bph07143 & lc = en & tmp_clcDestination = doclink

  • is more able to stream video from some sites after the upgrade to Safari 10

    After the upgrade to 10 Safari, I can no longer stream from a certain website. Instead of playing the video stream, I'm prompted to save "player.swf" as shown above.  This problem occurs on el Capitan, and it happens on the Sierra, and it all started when I updated Safari 9.x to 10.0

    Open Safari preferences / Security tab and check the box allow Plug-ins.

    Very soon of Flash player and the plugin will be obsolete and this web page needs to change its code to HTML5.

  • How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders in icloud but not on my Mac.  Thanks - David

    How can I copy files/sub-sub-sub-folders in Icloud on MacBook? Since the upgrade to Sierra, I see all of my folders (with documentation) in icloud but not on my Mac.  Thanks - David

    Turn off the power of optimized storage and copy the files to your Mac.

    1. Click on the Apple icon in the upper left corner of your screen.
    2. Select has about this Mac from the menu drop down.

    3. click on the tab for storage in the system information window.

    4. click on manage the...

    5 disable the storage element optimize.

  • Since the upgrade to Sierra - my CPU runs hot

    Recently, I used the app store to upgrade my MacBook Pro for OSX Sierra.

    From this point forward - my laptop is very hot and fans constantly run like a Jet engine.

    I see this in the activity monitor:

    I put all my contacts to synchronize hourly, and nothing has changed before the upgrade and after.

    How can I fix it? My life of the battery is to be purged, permanently.

    Any help appreciated.

    Thank you

    Amit

    Director general of Tallyfy - cloud-based process management

    Try restarting in safe mode (hold down the SHIFT key while booting). The problem persists?

  • Photos for Mac behaves VERY strangely since the upgrade to Sierra

    Hi all.

    I have improved my mid 2010 MacBook Pro for macOS Sierra September 21.

    The first time I launched the Photos app after the upgrade, I got the usual message on photo library updated, but when that reaches 100%, I noticed that he was missing a large number of thumbnails in my library. The photos in question were display in miniature (or 'moments') view as pale gray rectangles with a cloud icon in their breast.

    I don't immediately panic, because I assumed that they would gradually repopulate for a little while. I got "Storage optimize Mac", the value of preferences so all of my original pictures must be in iCloud. I have a Time Capsule, make automatic backups, and I made a backup Time Machine on which, immediately before the upgrade, so I am reasonably confident that I did not really lose my photos, (and all of my pictures and their thumbnails are present & correct on my iPhone).

    But, almost a fortnight after the upgrade, most of my thumb nails is always reported missing since the Photos of Mac application, which makes it very difficult to find pictures of course.

    Last night I noticed that the Photos app showed 'Uploading photos 10 985 nnnnnn' at the foot of the view of the times, with the first digit decreases slowly, so I disabled the options to ensure that my Mac doesn't go to sleep and I let it run until the download was complete energy saving. Then, he showed "updated... "at the foot of the view of the times for a while.

    I was hoping that my thumb nail would be back after that, but they are not!

    It seems that the Photos app is not sync with my iCloud storage, for any reason, or at least if it does not in fact what it has synchronized.

    A double click on these thumbnails blank to open the photo is not consistent either. On some that I try to open, they do not open, and when I return to the thumbnail display the thumbnail is now also. But on others I try to open I just see a completely white area where the photo should be. However (and this is really weird!) when I return to the thumbnail display after those I see very very briefly the photos as they will shrink to the size of the thumbnail, and then they are virgins thumbnails with clouds still...

    I wonder if I should change the preference of Photos of 'optimization of storage' to 'download the originals' in an effort to recover my thumb nails. It seems that I have almost 62 GB of free space on my Mac, and my Gallery of photos shows that there are currently 31GB. Or do I have to re - install the Photos app? (Is it possible?)

    Or is there a better solution to the problem please?

    Thank you for all the helpful tips.

    Post edited by: Steve Zodiac: grammar Correction.

    try to turn a thumbi = nail and reotating back - if it suits it you can do so for groups of up to about 1000 photos at once to correct quickly - how rebuild thumbnails in a photo library

    LN

  • Difficulties with all versions of html files since the upgrade of the Sierra

    I have problems opening and dealing with htm, html, html5 files since the upgrade of the Sierra.  Someone else?

    Please provide details. What problems are you having? HTML files open in a web browser, the browser you are using?

  • Random OS freeze or crash after the Upgrade of the Sierra

    Since the upgrade to Sierra, I started experiencing random freezes or crashes, the operating system.

    In general, I keep the mouse control (connected via trackpad), for at least a certain period of time. However, only the movement is possible - applications cannot be selected, there is no reaction to the clicks, etc. Attempts to pass via cmd + tab don't produce no result.

    I tried waiting for the system to respond. She finally slept, then crashed with a wake on the lack of sleep.

    The other answer is a hard reset by holding down the power until button a restart is forced.

    I ran disk in rescue mode utility, and he reported no problems with the disk. I've yet to try some of the more esoteric answers as reset NVRAM and so on... which is probably intended. I saw a report that said this problem was happening with El Capitan, and there is no resolution. I don't know if it's the same problem carried over, or a new.

    I got exactly the same problem you describe, on an iMac of retina of 2014. I've updated all non - App Store applications I have thought (and removed dozens of them), disabled launch points, unplugged my USB hub, downloaded EtreCheck (very useful application, incidentally) and road to combing through reports in the Library/Logs folder. On a Reddit thread on the problems with the Macs wake from sleep after installation of Sierra, someone suggested using the following command in a Terminal: kextstat | grep - v com.apple

    The command shows you what non-Apple kernel extensions are running in the background. Extensions of core apps such as Airparrot, strap, and duo caused problems with macOS Sierra. In my case, officer was running a kernel extension - then I deleted this app and went through my library/LaunchAgents and records of the library/LaunchDaemon, remove all items launch left by home and others deleted apps.

    EtreCheck reports said that so-called SIMBL caused several accidents. So I got rid of this, by following the instructions on the site SIMBL.

    Here's the problem: even after all these efforts (and each variant reset, I could think of) troubleshooting, nothing has changed. My Mac always has exactly the symptoms you describe, upon awakening from sleep. Every time.

    In the end I just gave up and restored my iMac to its State, 4 days ago in a backup using Time Machine. (It took 12 hours). With Dropbox, I didn't lose all of the work I've done in the meantime. So, I am now running a stable El Capitan, with an understanding to why people wait a few months before installing the latest OS updates.

    Sorry I can't offer more useful troubleshooting options - but perhaps some things that did not help me could help you anyway? Thanks for posting: it seems that the Sierra has been a pretty smooth update for most people, so I guess we're just out of luck?

  • After the upgrade to sierra, shutdown is extremely slow

    stop takes about 5 to 7 minutes. Screen will Dim, computer does not respond, but the stop takes 5-7 minutes. In the system log, no problems are reported.

    I closed all the software running before shutdown (clamx-av, dropbox, owncloud), but no difference.

    Hi rmschaefer,

    Thanks for the upgrade to Mac OS Sierra! Looks like your Mac takes a bit longer at the right stop. Great way to make sure that all applications are closed before you stop. You can try to check your Mac logs or startup items. Your item journal are applications that run as soon as you start up your Mac. They can run in the background continuously slow down your machine. Sierra macOS: If you think you have incompatible connection points

    You can also check to see how much disk space you have on your Mac. With Mac OS Sierra, you can release and optimize your disk without effort space to allow your Mac to run to its full potential!  Information System for Mac: optimization of the storage on your Mac

    If the release of disk space on your Mac and the removal of the login items not solve the problem, try to start the Mac in Mode safe.  Try safe mode if your Mac does not start-up

    What is safe mode?

    Safe mode (sometimes called secure boot) is a way to start up your Mac so that it performs certain checks and prevents certain software from loading automatically or opening. From your Mac in safe mode does the following:
    Check your startup disk and attempts to fix problems if necessary directory
    Loads needed kernel extensions only
    Prevents elements start and the login items open automatically
    Disables the user installed fonts
    Delete font caches, hiding the kernel and other files of the system cache
    Together, these changes can help resolve or isolate issues related to your startup disk.

    These measures should have your Mac off normally as expected and the Mac OS Sierra also runs fluid it is supposed to. Please use the Apple Support communities to post your question.
    Good day.

  • Cannot move photos to the computer after the upgrade to iOS10

    Yesterday my iPhone updated to iOS 10 and now when I plug my phone into my PC (HP m6w103-dx / Windows 10 / iTunes 12.5.1.21) the computer will ba - beep once iTunes sync, charge the phone but I no longer have access to the photos via Windows Explorer folder.  The phone does not appear in Windows Explorer and I don't get the second ba - beep that normally, I had before the upgrade.

    I restarted the phone and the computer, then tried again with no luck.  I myself have sent pictures that were on my phone, deleted all of them film, then took some new pictures and tried again.  Still no luck.  Help!

    Your post is the 4th now ask about the same problem. One user solves the problem by connecting the phone to a different USB port on the computer. You might want to try it.

Maybe you are looking for