The upgrade to Cisco ACS SE and Remote Agent

Similar Questions

• The upgrade to Cisco ACS

  Hello.

  I would like to upgrade our current ACS NT Terminalserver edition server to a Win2000 server. Since this upgrade requires a fresh installation (since a direct upgrade from NT 4 TS to w2k is not the best thing to do). My question is, do I have to do to ensure that I can keep my user database active? Is replication the answer? And replication will make a copy of all the different users/groups/routers etc etc. In other words, I'll be able to do this upgrade without too much trouble?

  I speak here of a replication of the database, do not configure replication between servers ACS.

  Here is the doc that will help you to do this

  http://www.Cisco.com/univercd/CC/TD/doc/product/access/acs_soft/csacs4nt/csnt30/user/AE.htm

• Secure ACS unit and Remote Agents

  Hello

  We test Secure ACS 3.2 device and authentication against AD via remote agents. When two or more remote agents are registered with the device in the network menu, is the pretty smart device to try the second machine remote agent if she can't talk to the first? We tested this failover by stopping the service of the remote agent on the first domain controller where it has been installed. However, failover does not occur. We want to know if this failover is supposed to work, and if so what we need to do to make it work.

  Yoshi Nagase

  Hello

  I implement a solution similar to yours... 2 ACS unit with 2 Remote Agent...

  I set the remote agents on the Network Configuration and the external user DB - database of Windows - Windows Remote selection of the Agent.

  In this menu the value primary and secondary Remote Agent

  HTH

  Omar

• The Remote option for matching seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  The Remote for iPhone & Remote app matching option seems to have disappeared (file/devices/Remote). This discovered after the last updated at 12.4 and Remote app would not work. Suggestions?

  Fixed. I removed the Remote, reloaded app to my iPhone and then reinstated the info Apple ID and password in the app all connected immediately. The 'Remote' option is not always present under file/devices/Remote, but everything works well at this point.

• I just bought the upgrade to Adobe DC Pro and downloaded, but it won't install - is always watch that I have Acrobat Standard DC?  Any suggestions?

  I just bought the upgrade to Adobe DC Pro and downloaded, but it won't install - is always watch that I have Acrobat Standard DC?  Any suggestions?

  Many people, (Brucgovn in particular), I appreciate the help... but nothing worked at all... but I FOUND THE SECRET!

  What you do, it is go to the Adobe Web site, click on your product and specify that you want to return items - you want a FULL REFUND!

  What is the first option, they give you?  The session ever elusive "cat."  Three times I tried with various silly responses that got me nowhere

  On my 4th attempt, I'm someone who knew what they were doing - literally within 5 minutes, all problems solved, and things everything works perfectly.

  So... my words of advice - forget trying to fix yourself - hitting where it hurts - in the wallet... the minute you say you want a refund - they struggle to get you fixed, hung, up and ready to go!

  Thanks again for the help!  I hope you all have a Merry Christmas - or whatever holiday you and your celebration of the!

• I bought the upgrade to Lightroom 6 (75) and closes unexpectedly. None opens ligthroom

  I bought the upgrade to Lightroom 6 (75) and closes unexpectedly. No ligthroom opens.

  Is there a telephone technical support in Spain before asking for my money?

  Hello

  Greetings!

  What is the operating system that you are using?

  If you use a MAC, here's a similar thread: Re: Lightroom 6 close unexpectedly

  Concerning

  Jitendra

• Upgrade to 3 computers need Home Premium and Professional___Will I need professionals on both computers, or only the host that I can access and remote desktop computer?

  I have 3 computers I want to upgrade to Windows 7. I think to buy the update pack Home premium 3 but need to remote desktop on a computer. Purchase a professional upgrade for 1 single computer after buying the pack Home premium 3? If so how will the upgrade?

  Why not ask here:
  http://social.answers.Microsoft.com/forums/en-us/GettingReadyforWindows7/threads?sort=viewsdesc

  They may be able to advise you about your options, etc.. TaurArian [MVP] 2005-2010 - Update Services

• Upgrade to Cisco acs 1120 to 4.2.1.15 help

  Hi all

  I downgrade of cisco device 1120 DCC acs 4.2.0.124 5.0, I need to upgrade to acs 4.2.1.15. Is device 1120 cisco acs supports 4.2.1.15, how do I upgrade 4.2.0.124 4.2.1.15.

  There are any server distribution for the upgrade. Please suggest on this, thank you

  Yes, you can upgrade it to 4.2.1.15 and you can download the version from the link below listed;

  http://Tools.Cisco.com/Squish/d4e4A

  Here are the files you need to download:

  ACSse-Upgrade-Pkg-acs-v4.2.1.15-K9.zip

  ACSse-Upgrade-Pkg-appl-mng-v4.2.1.15-K9.zip

  : Note apply the upgrade of management first and then software update. ..

  Distribution server is a machine where you can download the patch on the Cisco Secure ACS Appliance, so if you download the version on your laptop and download then only one distributor (nothing special)

  Upgrade an application of 4.2.1.15

  http://www.Cisco.com/en/us/partner/docs/net_mgmt/cisco_secure_access_control_server_for_solution_engine/4.2.1/Installation_Guide/solution_engine/upgap.html#wp1148376

  I hope this helps.

  Rgds, jousset

  Note the useful posts ~

• Selection rule for the 5.2 Cisco ACS Service

  Hello dear,

  I'm trying to configure the Cisco ACS 5.2 to Dot1x of authentication for clients on windows 7 & windows XP, I did all the steps but I could not create Service rule, it gives me an error message that you can see in the attached screenshot.

  After that I specify the allowed protocols it gives me the choice to choose the choice of identity and the is ' t it give me this error.

  your help is very appreciated.

  Kind regards

  Ibrahim

  Try another browser like Hussam suggested and let us know the results.

  I updated FireFox to 15.0.1 and now I am not able to manipulate many parameters with ACS 5.3
  Version of this browser is extremely stupid with ACS 5.x, but it shows not all message boxes. It just does not display the page when you click on the link.

  If different browsers show the same question, I would say that you restart the machine (physical or virtual) completely and try again.

  It is also best to upgrade to the latest patch, if this is not already the case.

  Greetings,

  Amjad

  Rating of useful answers is more useful to say "thank you".

• How to restore the password on Cisco ACS 5.4

  Hello!

  Try to restore the Cisco ACS 5.4 password installed on vmware. Where can I get the password recovery DVDs? There is no software in the list on the site.

  TAC may provide to you. You will need to open a folder and the application.

  HTH

• With the help of Cisco ACS 5.2 (GANYMEDE +) with other than Cisco devices

  Hi all

  I was hoping that someone could help me with what might be a silly question. I'm trying to implement a solution whereby an operator can control all their nodes (other than Cisco) network via GANYMEDE + involved nodes are

  Juniper M10i running Junos 9.2, M120

  M320 running Junos 8.5 Juniper

  Extremes of BD8810 and BD8806 running 12.4.1.17 XOS

  3804 Alpine extreme Extremeware 7.8.3.5 running

  My question is, can I use Cisco ACS 5.2 (or 4.2) to authenticate using GANYMEDE + to these other than Cisco devices. Has anyone else done this or I have to use RADIUS? If someone has done this are problems of interoperability with Cisco CS and Junos or XOS extreme. Thank you

  / John

  John,

  We have a very large deployment of Juniper (T-series, series MX, etc.). We use Cisco ACS and GANYMEDE to manage these devices. The configuration of the ACS is fairly simple. You'll want to create users to connect and match them to the classes on your JUNOS routers. Here is an example:

  set system login user uid of engineering 2000
  Set system login user engineering genius-class class
  set the connection user uid to NOC 2001 System
  Set system login user AC AC-class class

  define the system connection Engineering-class idle-timeout 15
  define a connection system class engineering-class permissions all
  define the system connection AC-class idle-timeout 15
  define the connection class AC system class view permissions
  Set connection AC-class permissions see the system configuration

  We use two classes of genius and NOC. One is defined as a read / write and the second read-only. This is in turn then mapped in ACS (in our case version 4.2) by user or group (preferred). First, you change the configuration of the interface and add a Ganymede junos-exec service and do not enter the Protocol field. Then, you change the attributes of the user group. I've attached screenshots for both on this subject.

  Hope this helps.

  Derek

• Renew the certificate in Cisco ACS for PEAP authentication

  Hi, we installed in laptops wireless customer a certificate created by Cisco ACS to authenticate, but its about to expire.

  How can I do to renew the certificate whithout affecting users.

  (1) Yes, we can generate a new cert but install the latter.

  (2) install generated new cert on the client.

  (3) install the new cert in ACS.

  Good plan and will probably work.

  Kind regards

  ~ JG

  Note the useful messages

• After the upgrade successfully 10.0.2 and 11, when I restart the next day, 3.6.28 opens. Please notify

  using xp SP3. This happens every day since the upgrade to the new versions. Power upgrade successfully and use for the rest of the day. Then, after a stop in the night and when restarting in AM, older version opens.

  Without trying something new since my last post, for reasons I can't understand, the issue is resolved. I've waited several days (to respond) to confirm everything works correctly, and for the moment, everything is good. THANK YOU for all that you said. This was my first use of the forum and I appreciate your time and your generosity.

• Since the upgrade to Windows 8 Youtube and other videos flash will not play smoothly

  Since I've upgraded to Windows 8 Youtube and other flash videos will not play smoothly.  When I press play, the video freezes on an image and the sound is fine but the image is locked for several seconds.  So if it starts to play, he is so rough its not watchable.  If I pause the video and let it buffer for a bit and press play again it works usually smooth for 3-4 seconds in the rough again goes.

  This is the case with IE, Firefox and Chrome.  My computer is a HP DV7 3060 64-bit with 4 GB of Ram.

  I have tried to update drivers video, impossible to find the best drivers.

  Any help would be really appreciate as I really get annoyed by this and do not want to go back to Windows 7.

  Here are the video drivers for your graphics card.

• After the upgrade to WIN 8, Office and other programs are lost?

  After the upgrade to WIN 8, have been uninstalled all of my programs, including Office 2010. Does anyone know if there is a way to get back programs without having to reinstall everything?

  If you have selected "keep settings of Windows, files and applications, then you should still have Microsoft Office installed. You have not selected this option during installation?

  

  Besides being able to keep your Windows settings and personal files, you can keep your personal files too during the upgrade to Windows 7. If you choose No, Windows 8 place your files in a folder named Windows.old.

  If you have not selected these options, you will need to reinstall your programs since the original installation disc.

  

  To launch your applications, go to the start, screen by pointing your mouse pointer on the left corner of the screen of Windows 8 and click on it.

  

  Do scroll to the right and start your application.

  For more information about how to install Windows 8 applications, see the following article: