The upgrade to vsphere 4 essentials for vsphere 4.1 essentials more with 2 servers?

Similar Questions

• The upgrade to vSphere + SQL Express to SQL 2005 + new vCenter Server

  Hello world

  It's the scénarion that I have today:

  A node just two HA/DRS cluster with vCenter 2.5 update 4 and two esx 3.5 update 4.

  The environment has increased enough to move from SQL Express to SQL 2005 standard. In the process, I want to upgrade the environment to vSphere and the vCenter move another box.

  I'm quite familiar with the process of vSphere upgrade but I donít know how to move the vCenter to another machine AND I do not know how to go from Express to the standard version of SQL in the process. (I have a SQL machine ready for use)

  I do not know how to handle all the changes here, I thought it would be nice to all move to the new machine and DB so that I could continue with the upgrade to vSphere, if this has meaning or not, I'm waiting for your ideas.

  I hope someone will give me some guidance on moving from SQL Express to SQL and how to move vCenter to another server (of course with a different server name and IP address)

  Thanks in advance for your support.

  I just did something very similar a few Sundays ago and it was really easy.  Refer to the section of the Upgrade Guide that talks about upgrading to vCenter on another Machine... (starts at p. 49).  We went from SQL 2003 32 bits on 32-bit Windows 2003 to SQL 2005 64-bit on Windows 2008 R2 64-bit.  Both are running as VMs - vCenter 2.5 is still there only as a license server - until I get all my hosts upgraded.

• I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste,

  Issue.

  I look integrated in the block of the legend of slide show, a widget like "Accordion" for, with one click, or by the way with the mouse, open a new caption for each photo. I tried with 'Accordion' Muse, it does not work. I haven't tried to copy and paste, but no result. The widget disappear into the legend of block. disappear. Do you have a solution?

  Thank you

  Loïc

  Accordion Panel tabs should, with click and open the container.

  Please provide the url of the site where it does not, also if you can provide an example where we can see the exact action, then it would help us.

  Thank you

  Sanjit

• checks before the upgrade to vSphere

  Hi all

  my whish is upgraded to esx 3.5 hosts I already to vSphere.

  I checked HCL and it seemed to be possible, but, not being only not sure about x 64 CPU tried to build 1 x 64-bit OS on each host and I received a message that it was not possible.

  So I guess I can't upgrade to vSphere.

  Am I wrong? or I can do other than buying other servers...

  I am running DL380 G5 and DELL poweredge 6850

  THX in advance,

  Daniele

  Daniele,

  It looks like there DELL shipped this server with several different processors.

  The only supported are those listed in the VMware HCL for DELL PowerEdge 6850

  It goes the same for HP DL380 G5

  André

• The upgrade to vSphere in an environment of BladeCenter with 15 GB hd by blade

  Hi all

  I have a test environment with a BladeCenter S chassis with 2 hs21 xm blades with esx 3.5 update 4 configured as a cluster 2 nodes. I would like to use this as a test environment for all update scenarios 3: update manager, update of host and new installation utility.

  My blades have 15 GB of local disk on a solid space state double drive, now I know the minimum suggested for COS is 8 GB, 10 GB every, but my current layout of disc (the default installation of esx 3.5) will not put the COS. VMDK in local storage, which is something I don't like for future production upgrades of the scenarios. This is my current layout:

  Disk/dev/sda: 14.9 GB, 14999879680 bytes

  Heads of 64, 32 sectors/track, 14305 cylinders

  Units = cylinders of 2048 * 512 = 1048576 bytes

  Device boot start end blocks Id system

  / dev/sda1 * 1 100 102384 83 Linux

  / dev/sda2 101 5100 5120000 83 Linux

  FB/dev/sda3 5101 11680 6737920 unknown

  f/dev/sda4 2688000 14305 11681 Win95 Ext'd (LBA)

  / dev/sda5 11681 12224 557040 82 Linux swap

  / dev/sda6 12225 14206 2029552 83 Linux

  14207 14305 CF 101360 unknown sda7

  As you can see that my current local data store is about 6 GB, which is not enough. I was wondering if there is something I could do to make room for the COS. VMDK

  Another curiosity I have is what happens if I do a new install of vSphere? He will be able to use this space to put the COS. VMDK locally? I guess it will be since I tested vSphere on a Virtual Machine with 10 GB drive and it worked.

  I hope someone can give me a hint on how to set the COS locally without a new installation. Thanks in advance for your support.

  Device boot start end blocks Id system

  / dev/sda1 * 1 100 102384 83 Linux

  This is the boot partition, do not touch it

  / dev/sda2 101 5100 5120000 83 LinuxRoot or/var

  FB/dev/sda3 5101 11680 6737920 unknown

  It's the VMFS partition. Can be deleted as long as it's empty (do not want to lose your virtual machines)

  f/dev/sda4 2688000 14305 11681 Win95 Ext'd (LBA)

  Beginning of the extended partition. Cannot be changed unless you move all of the contained partitions also.

  / dev/sda5 11681 12224 557040 82 Linux swap

  Swap partition, referenced in/etc/fstab with label, UUID, or/dev/sda5. Can be spoiled safely with as long as you update fstab to point to the correct swap ultimately partition

  / dev/sda6 12225 14206 2029552 83 Linux

  root or/var partition

  14207 14305 CF 101360 unknown sda7

  vmkcore partition, not critical

  My suggestion would be to try to remove the vmfs partidion and expand your second linux partition to be large enough to hold the contents of what is in/dev/sda6. Then copy, for example, using rsync and put to day/etc/fstab to mount/dev/sda6.

  Then, you should be able to remove the whole extended partition and reuse free space to build a new vmfs, swap and vmkcore.

  Keep in mind that these are destructive operations - you can start making an image DD of the entire disk to another location, like a drive USB or NFS share on the network. In this way you can restore all of the disk using dd if = of = / dev/sda if you need to.

• The upgrade to vSphere clean install of P2Ving old Vcenter

  I searched the Forum, and I have not found any discussion on this topic... again.

  I'm not so sure that this discussion should be in this forum or a forum for Vmware converter... But I would like to put these questions to you in any case.

  Scenario:

  We're on ESX 3.5u3 now, with 22 guests and 1 server (physical) vCenter. We have chosen the Installer Clean way for infrastructure. As well as create the new vCenter as a virtual machine on a stand-alone host ESXi 4 server.

  Because we are running out of material, we will follow this course of action.

  1 P2V current vCenter Server on a virtual machine, so that we can still vCenter features during the upgrade/rebuild process

  2 rebuild the old Server vCenter as a host ESXi 4.

  3. building the new vCenter Server 4 as a virtual machine with Win2k8R2 etc etc and create a new database as well

  4. then rebuild each of our ESX 3.5u3 hosts 2 both as 4u1 ESX or any update is the most recent.

  5. once all hosts are reconstructed as ESX 4 we will then turn off the old server vCenter 2.5 VM and reactors as well as the old database.

  5. then, of course, we will convert VM material on each guest one by one.

  That's what I understand as a fairly straightforward environmental own reconstruction.

  The questions I have are pretty simple, but I want to get as much input as possible:

  1 will be the Server P2V process freak out vCenter vCenter when we reboot as a virtual machine?

  2. can I use Vmware on the server vCenter converter to convert to a virtual machine and is not a problem when restarting a virtual machine?

  Your comments are much appreciated.

  Thank you

  Yes... just point vconverter of an ESX Server, provide the root password /, choose data store and go.

• the upgrade to vista 64-bit for windows 7 64 bit.

  I recently bought a pack of conversion from microsoft for windows 7 64 bit.

  It downloaded as files from the BOX and im extremely frustrated, I can't do anything with these files. I assumed it would be a simple download and upgrade to vista 64-bit for windows 7 64 bit and have tried everything available to me.

  Please help someone

  You can download the .iso file correct 64-bit instead:

  http://en.community.Dell.com/support-forums/software-OS/w/microsoft_os/Microsoft-Windows-and-Microsoft-Office-downloads.aspx
  The format of the box is the old version.

• The upgrade to Windows 7 ultimate for Windows 10

  Hi all I'm having trouble upgrading victories. 7 victories. 10 I tried over and over again, but all the get is a MESSAGE of ERROR ("WindowsUpdate_C1900101" "WindowsUpdate_dt000"), if there is someone who can HELP me with this problem I would be very appreciate you thank you very much.

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  If this does not work, try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• The upgrade of a Windows 8 for Windows 8.1 Tablet

  Hello

  If I buy a Tablet Windows 8 (not RT!), can I upgrade it to Windows 8.1? What are the known issues. I am planning to buy a Samsung ATIV TAB 3.

  Thank you very much

  Bora

  Yes, it can be improved to 8.1 Windows

  S ' ensure that you apply the latest updates before upgrading.

  -Try to switch to a wired connection if you download over Wi - Fi

  Disable/uninstall no matter what third-party Antivirus, you may have installed before the update.

  -Do a clean boot.

  http://support.Microsoft.com/kb/929135

  Make sure that you have a Microsoft Account before the upgrade:

  Create an account - sign up - Microsoft account

  You can find the details here for which the update is necessary to see the Windows 8.1 update.

  If you encounter problems with the installation of Windows Update, we recommend that you post for help with this question.

  You can also try an automated solution by running the Windows Update troubleshooting tool

  3. you must synchronize your App license; You can do this:

  * On the start screen, tap or click on Store to open the Windows store.

  * Drag from the right edge of the screen, and then tap Settings.

  (If you use a mouse, point to the lower right of the screen, move the mouse to the top and then click settings.)

  * Tap or click App updates

  * Press or click on Sync licensing

  4. the Windows store catalog is not refreshing properly.

  To refresh the catalog, try pressing the Windows key and R to open the Run dialog box type WSReset.exe and press ENTER. Restart, then check again the store Windows.

• The upgrade of Vista home premium for the company

  Hello

  I bought my toshiba satellite and startet to install all my software on it.
  I really want to install the version of Vista Enterprise there are many functions that Miss probably with the preinstalled vista home premium.

  Does anyone know a way to install without having to reinstall the entire system again?

  Any idea?
  THX.
  sfloehle

  Hmm, I assume that you will not need to boot from the CD of Vista Business, but you have to start the DVD of Vista Business running Vista Home Edition.

  However, I m not 100% sure, but I guess that it s the same procedure like an update of Win XP Home Pro.

  Best regards

• HP Pavilion x 360 11-k132TU 11 ": the upgrade of my HP Pavilion x 360 11-k132TU computer laptop with processor Intel Pentium N3700

  I have the HP Pavilion x 360 11-k132TU 11 "2 - in-1 computer laptop recently and discovered that the processor is really slowing me down."

  This is the product that I brought

  https://www.jbhifi.com.au/computers-tablets/laptops/HP/HP-Pavilion-x360-11-k132tu-11-2-in-1-laptop/7...

  Are there chances of this WEAK processor upgrade? How to change and what cpu should I get?

  Budget is not really a problem, I don't want to lose this laptop because I liked its features 2 in 1.

  Response PLZ! It's my first time handling HP products and I don't want it to end like this...

  Thank you!!

  Yes, this was not a choice good processor if you want to do demanding tasks. You have the N3700 processor which is a low power (both in terms of calculation and electricity) designed for long battery life, without not demanding calculation.

  http://cpuboss.com/CPUs/Intel-Pentium-N3700-vs-Intel-Core-i3-5010U

  It is as powerful as an i3, about 85-90%, which isn't really too bad considering how little juice it uses.

  See p. 16 of the manual here, with 2 messages. The CPU is soldered to the Commission is not able to be upgraded separately, and the only processors available on this model are low power. And a motherboard would cost about as much as the laptop.

  Repair manuals

  Believe it or not, the top of the page processor is the M3 Skylake which runs at 900 mhz, but is even more powerful than the N3700, but not a lot.

  Purchase of a computer is not the brand. It's the material inside. If you decide to replace this one, please ask here or on a similar technology that is out there and its capabilities on-line forum. It was easier, but is now a bit complex.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Since the upgrade to 31.1.0, I can't send an email with an attachment. I'm under OpenSuse 13.1 on KDE. How can I fix?

  If I try to send an email with an attachment or a picture inserted, it starts to send with a progress bar that will read a 80 to 95% completion and then stay there until it times out after a few minutes. I get this error: failed to send the message.
  The message cannot be sent because the connection to the server of SMTP outgoing.verizon.net expired. Try again or contact your network administrator.
  I use the same provider of e-mail for several years. This works for emails of simple texts without problem. If I try to transfer or to respond to an email, I get the same error.
  How can I fix?

  Thank you

  Robert

  OK, I thought about it. As I was going through the configuration editor, I saw the outgoing server settings. It made me wonder if something had changed. I went to my provider and reinforced through their list and found where mine differ. If the update for thunderbird changed something or verizon changed something.
  Thanks for the comments.

• Cannot install the upgrade to Windows XP Pro SP1 of Windows XP Edition family with Service Pack 3.

  Cannot install upgrade

  The home computer has Windows XP Home (pre-installed) Edition with Service Pack 3.  Buy XP Pro SP1 update.  Can not install the upgrade, get the message: Setup cannot continue because the version of Windows on your computer is newer than the version on the cd.  I tried method 1, 2, 3 and 4 on how to remove Windows XP Service Pack 3 from your computer.  None of these methods works.  Y at - it software to locate and Uninstall SP3 so I can install xp pro upgrade, that I bought?

  Hello

  I suggest to Uninstall SP3 and retry the upgrade. When the upgrade has completed, you can download the latest Service Pack.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Restart the computer after the uninstall is complete and retry the upgrade.

  Important: Make a backup of your data before you uninstall the Service Pack.

• Questions about the upgrade to vSphere Essentials

  My group is looking to upgrade our ESXi (free) installation to vSphere Essentials. Before do us, I have a few questions (I tried calling & commercial VMWare email, but no one seems to be there):

  1. We have an existing ESXi to install, and we'll add a 2nd machine to host VMs can I use vCenter (from Essentials) to manage two computers?

  2. Requirements for vCenter status she has 2 CPUs, 4 GB of memory and 3 GB of disk space for up to 50 guests. However, we have 2 guests and we add a 3rd host is far in the future (in years). Can we run vCenter on an existing installation of windows server 2003? We have a server that meets these requirements, but it also makes other tasks (some calculations, files and backup service). Given these lighter constraints, will that be enough to manage our two hosts?

  Memory is a problem I think. But my vCenter with 9 guests and 150 VM a average 2-5% CPU load with 1 quad Xeon, so don't worry is not the CPU.

  Local Oracle DB installed on the machine of vCenter.

  ---

  VMware vExpert 2009

  http://blog.vadmin.ru

• After the upgrade to vSphere error "TSC: 3197488: 461: the Execute Disable / No Execute CPU feature is not enabled for this machine ' is displayed

  I looked for the community and I found someone else found a solution that I can't use because my bios level is the most recent:

  http://communities.VMware.com/thread/212895

  vSphere is installed on an IBM HS21 XM blade in a BladeCenter chassis.

  In addition to this error appearing in the console once the ESX host starts everything seems to work ok, can someone explain what it is and possibly a solution? Thank you.

  Hello

  had the same error on some x 3650. In the Bios is an Option to change this think future I´ll, it's under Advanced Options.