The upgrade to Windows 7 Home Premium 32 Bit for Windows 7 Ultimate 64 Bit

Similar Questions

• The Aero Peek feature does not work on my computer that I've recently upgraded to the version of Win 7 Home Premium 32 bit.

  After you have installed Windows 7 Home premium, I noticed that the aero peek feature does not systematically after a fresh reboot upward. Sometimes when I turn on my computer the aero peek feature turns on immediately and works well. On other occasions when I turn it on it just does not come to the top. I had the box customize and found the checked enable aero peek. Still aero peek doesn't work. So to summarize if aero peek turns on it works fine. However, it does not illuminate whenever I boot my machine eventhough that the box is checked. Please notify.

  Try this: launch REGEDIT, navigate to HKEY_CURRENT_USER and make sure that EnableAeroPeek is set to 1, rather than 0.
  It can help.

• Missing drivers after the upgrade to Windows 7 Ultimate

  I upgraded my HP Pavilion dv4 5113 Windows Home Premium from Windows Ultimate edition. I can't the following drivers for my machine upgraded. His works well but the yellow marks when you open computer, management and Management is boring please help.

  Controller Serial Bus (USB)

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E31 & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E31 & CC_0C0330

  PCI\VEN_8086 & DEV_1E31 & CC_0C03

  Ethernet controller

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1836103C & REV_06

  PCI\VEN_10EC & DEV_8168 & SUBSYS_1836103C

  PCI\VEN_10EC & DEV_8168 & CC_020000

  PCI\VEN_10EC & DEV_8168 & CC_0200

  PCI device

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1836103C & REV_01

  PCI\VEN_10EC & DEV_5229 & SUBSYS_1836103C

  PCI\VEN_10EC & DEV_5229 & CC_FF0000

  PCI\VEN_10EC & DEV_5229 & CC_FF00

  PCI Simple Communications controller

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E3A & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E3A & CC_078000

  PCI\VEN_8086 & DEV_1E3A & CC_0780

  SM Bus controller

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1836103C & REV_04

  PCI\VEN_8086 & DEV_1E22 & SUBSYS_1836103C

  PCI\VEN_8086 & DEV_1E22 & CC_0C0500

  PCI\VEN_8086 & DEV_1E22 & CC_0C05

  Unknown device

  ACPI\HPQ0004 * HPQ0004

  Thank you in advance.

  Hello

  Download and install the following:

  Intel Chipset driver.

  After this Setup is complete, restart the laptop.

  Then, download:

  Intel USB 3.0 driver.

  Realtek LAN Driver.

  Realtek card reader driver.

  Intel MEI driver.

  HP ProtectSmart.

  Kind regards

  DP - K

• Upgrade to Win 7 Home Premium 32 bit Vista Home Premium 32

  I have a laptop Dell Inspiron 1525 with an Intel Duo T5550 processor.

  It came with Vista Home Premium OEM.  I want to switch to Win 7 Home Premium 32.  I have lost the backup package of all software provided with the PC.  Do I need the original disc against the install Vista upgrade to Windows 7 or recognize the Win 7 install my Vista complete?  I remember way back when I upgraded from Mellenium to XP I had to insert a Windows Installer disk.  Help?

  The Windows 7 upgrade will be superimposed the Vista.

  The upgrade is performed from a Vista running

  Windows 7 questions for:

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to / stationed there.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• After the upgrade to Windows 7 Ultimate, I am unable to open Quickbooks 2007.

  I went from Windows 7 Pro for Windows Ultimate a few months ago, and now I can't get my Quickbooks Pro 2007 to open. What can I do?

  original title: programs Application Applications error with my 2007 Quickbooks compatibility, why?

  Hi, Zoe-925,

  Uninstalling the app

  If a repair option, select, which - if it still does not work, uninstall the application.

  Restart your computer

  Reinstall the application

  Even with the upgrade, you always have to reinstall some apps.

• The upgrade to Windows 7 ultimate for Windows 10

  Hi all I'm having trouble upgrading victories. 7 victories. 10 I tried over and over again, but all the get is a MESSAGE of ERROR ("WindowsUpdate_C1900101" "WindowsUpdate_dt000"), if there is someone who can HELP me with this problem I would be very appreciate you thank you very much.

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  If this does not work, try the upgrade manually:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• After the upgrade to Windows 7 Ultimate HD 4300 ATI Radeon - the device cannot start (code 10)

  Upgrade vista to windows 7 ultimate and as a result the HDMI to the Tv link is not working. -the ATI MobilityRadeon HD 4300 Series shows the message that this device cannot start (code 10).

  Downloaded ATI VGA Driver Acer laptop thie, but this does not seem to solve the problem.

  Hello

  Please follow the steps mentioned in the link below.

  http://support.Microsoft.com/kb/943104

• After the upgrade to windows 7 Ultimate I downlosded Microsoft Flight Simulator 2004 and he lights up in low resolution and cannot be used. What can be done to corecct it?

  Cannot run fs9

  herbmah,
  If you still experience this issue, then you should try the following.

  Update your drivers for your video and audio.  Ensure that the manufacturer has Windows 7 drivers for your specific hardware.  You may also look for both motherboard chipset drivers.

  If you still have problems after updating all your drivers, then clean restart your PC and test.
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to create the new folder using Vista Home Premium 32-bit.

  It is on a Toshiba laptop which is about five years old.

  Explorer

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

   

  To see if a fix is available

  In Control Panel (and select Classic discovered in the left pane) select reports on the problems and Solutions (problem of type in the START search box), go to historical problem, right-click of your error and choose check for the Solution.

  You can also right-click and choose Details for more information. Post these details here. The name of the Module fault is important information.

  If the problem affects Panel press the Windows key + R and type wercon (or type it at a command prompt).

   

  Close the browser and start a command prompt

  About any what Explorer windows Start - All Programs - Accessories - right click on command prompt and choose run as administrator. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete then Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list.

  Then to restart the Explorer after trying all of the following

  Press Ctrl + Alt + Delete and choose Task Manager from the Task Manager click the menu file then the new task (run) , type explore

   

  If you cannot start the Explorer at all

  Press Ctrl + Alt + Delete and choose Task Manager on the processes tab, click Show processes from all users to elevate to administrator in Task Manager, click the file menu then the new task (run) and type cmd other things you can try typing

  Explorer
  Explorer c:\
  Explorer/e, c:\
  wercon
  control
  Iexplore

  If you cannot start a folder window you can use the Browse button in the new task dialog. Don't forget that you must right click and choose Open rather than double-clicking.

   

  Reregister the shell registry entries

  It is important that each order is accepted. If the command fails it means the file is damaged and must be repaired.

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  regsvr32 /i shell32
  regsvr32 /i urlmon.dll
  regsvr32 RPCRT4.dll
  regsvr32 PROPSYS.dll
  regsvr32 MSCTF.dll
  regsvr32 cscui.dll
  regsvr32 rsaenh.dll
  regsvr32 timedate.cpl
  regsvr32 ATL DLL
  regsvr32 OLEACC.dll
  regsvr32 actxprxy.dll
  regsvr32 USERENV.dll
  regsvr32 msshsq.dll
  regsvr32 NaturalLanguage6.dll
  regsvr32 thumbcache.dll
  regsvr32 WINTRUST.dll
  regsvr32 MMDevAPI.DLL
  regsvr32 audioses.dll
  regsvr32 audioeng.dll
  regsvr32 ExplorerFrame.dll
  regsvr32 msi.dll
  regsvr32 FirewallAPI.dll
  regsvr32 netshell.dll
  regsvr32 pnidui.dll
  regsvr32 QUtil.dll
  regsvr32 c:\windows\system32\wpdshserviceobj.dll
  regsvr32 WINHTTP.dll
  regsvr32 C:\windows\system32\qagent.dll
  regsvr32 C:\windows\system32\portabledeviceapi.dll
  regsvr32 wbemprox.dll
  regsvr32 wbemsvc.dll
  regsvr32 fastprox.dll
  regsvr32 imapi2.dll
  regsvr32 wshext.dll
  regsvr32 gameux.dll
  regsvr32 msxml6.dll
  regsvr32 vbscript.dll
  regsvr32 jscript.dll
  regsvr32 wshext.dll
  regsvr32 wshom.ocx
  regsvr32 wshcon.dll
  regsvr32 scrrun.dll

   

  Delete folder settings

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Reg delete "HKCU\Software\Classes\Local Settings\Software\Microsoft\Windows\Shell" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Streams" /f

  Reg delete "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\StuckRects2" /f

  Delete the thumbnail and icon Caches

  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  attrib - r s h '% userprofile%\AppData\Local\*.db '.

  del "% userprofile%\AppData\Local\*.db".

  Disable thumbnails and previews

  Damaged documents and particularly corrupt pictures or videos, can cause Explorer crash all trying to generate a thumbnail or an overview. This miniature and previews active option off.

  If you can start the Explorer, previews is Union on the command - folder and Search Options - framework of tasks use classic Windows foldersbar.

  Thumbnails are organized on the command bar - folder and Search Options - view tab - and check under Advanced settings - always show icons, never thumbnails and uncheck Show icon file in the pictures.

  If you cannot start the Explorer close Explorer as above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000000 f

  Turn around after testing the Explorer.

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "IconsOnly" /t Reg_DWord /d 00000000 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowPreviewHandlers" /t Reg_DWord /d 00000001 f

  Tracking Add "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced" v "ShowTypeOverlay" /t Reg_DWord /d 00000001 f

   

  A boot is a way to explore

  It can be caused by a shell extension.

  Explorer (explorer.exe) is the program that is the start menu and taskbar, windows folder and the office (which is a folder window).

  The Explorer is built on addin programs called Extensions of Shell. The standard is provided by Microsoft, but programs add their own.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx close the windows Explorer Start Autoruns by right-clicking and choose run as administrator , click Options menu - Filter Options and check hide Microsoft entries and claire include empty slots to go to the Explorer tab and uncheck everything to the left. Click Start. Ctrl + Shift + Right-click on an empty spot (just above the power of buttons is one place) then Exit Explorer. Press Ctrl + Alt + Delete and choose Task Manager.  Control all processes to explore are closed. On the process tab select explore and right-click and choose end process, repeat if more of an Explorer in the list. Click the file menu and then click new task (run) and enter explorer

  If it helps, re-enable one by one to identify the who.

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see problems explore

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to your hard drive. It will contain all 27 FixIt.

  Recycle Bin
   
  If the problem is the trash bin remove the storage folders. It will be automatically re-created next time you delete a file or open the Recycle Bin. It will remove the trash and the files it contains for all users.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  RD C:\$RECYCLE. BIN/s/q
   
  then repeat for each drive to change the drive letter, for example
   
  d:\$recycle Rd. BIN/s/q
   
  e:\$recycle Rd. BIN/s/q
   
   
  If the Office does not start
   
  This will create a new empty by user and common desktop computer. This will allow to test if a file on your desktop to start the Explorer.
   
  Close the Explorer like above and then type at the command prompt (or copy and paste by clicking in the command prompt window and choose Paste).
   
  MD "% userprofile%\DesktopTest".
   
  Add reg "HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" / v/t desktop REG_EXPAND_SZ /d "% USERPROFILE%\DesktopTest"
   
  MD "% public%\desktopTest".
   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\DesktopTest".

   

  To restore default after having tested if begins to explore.

   

  identifying add / REG_EXPAND_SZ /d "% USERPROFILE%\Desktop" office t/v 'HKCU\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders ".

   

  Tracking Add "HKLM\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders" /v "Common Desktop" /t REG_EXPAND_SZ /d "% Public%\Desktop".

   

  You will need to disconnect then.

   

   

  Type in a command prompt

   

  Reg query HKEY_CLASSES_ROOT\Folder\ShellNew/s

   

  and paste the results here.

• Cannot open and view the files on a Vista Home Premium 32-bit networking machine

  My laptop running Vista Home 32-bit pre SP2 has been networked with my desktop running XP V2002 Pro SP 3 for a long time.  Until recently, the files were shared back without problem.  After a Windows Update, a few days ago my Vista machine keep gel.  After a diagnosis, I have disabled some startup software Google and McAfee and services programs and did a system restore to March 31 to resolve the problem of gel.   However, I can't restore the capacity on the laptop of Vista file sharing.  This Vista laptop is able to ping the XP machine and see and access the files on the XP machine.  But the XP machine can't Ping the Vista laptop (application expires) and when you click on the list of the Vista laptop for the task force on the XP machine, it gives the error message \\Laptop is not accessible.  You might not have permission to use this network resource.  Contact the administrator of this server to find out if you have access permissions.  The network path was not found. I tried various fixes suggested.  All have failed. (1) turned power off the modem cable & wireless router, restarted and connected the modem and router computers in after the computer restarted. (2) Turned off all 3rd party software and even restarted the laptop Vista in safe mode with network.  Could not even Ping the laptop of Vista on the XP machine or access the notebook icon in the Working Group in MyNetwork places. (3) Made that exception file sharing and printer is selected in the Windows Firewall settings. (4) checking network and sharing Center.  Discovery of the network, file sharing, sharing public folders, & Printer Sharing set on "On".  Sharing still protected by password set to 'Off '. (5) group named network WORKING Group on both machines. (6) the fact that individual records are always set to 'share '. (7) in the properties of wireless network connections, Internet Protocol Version 6 (TCP/IPv6) has been disabled. (8) has a netsh winsock reset on the Vista laptop.   Am I missing something else? This problem would go away if I have upgraded from Vista to Windows 7 on the laptop / Windows 7 can network with a XP Pro machine? Thanks to all those who have ideas on what the problem may be.

  Hello

  I appreciate the effort you have put in to solve the problem.

  I suggest you review the process in the document to ensure that nothing is missed.

  Link: Sharing files and printers in Windows Vista: http://technet.microsoft.com/en-us/library/bb727037.aspx

• my administrator password does not work after the upgrade to Windows 7 Ultimate and can not get as administrator__

  Failed to get on as an administrator on new Wwindows & Ultimate

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Want to upgrade hp vista 32 home premium... for vista 64 - Hp pavilion dv9628nr

  64-bit (vista) operating system is the way to go for me on this system, but I can do? And there at - it falls from the sky

  inherent with vista 64 or should I give up vista 64 and windows 7 64 with this laptop to do?

  DV9628NR is fully able to support WIndows Vista 64-bit. You can go ahead and do a fresh install of Windows Vista 64-bit on your system. You can not move from 32-bit to 64-bit because of the difference in the architecture of the operating system.

  In addition, instead of Windows Vista 64-bit, you can even try Windows 7 64 bit. Here is the Internet link that has the Windows 7 installation guide:http://h30434.www3.hp.com/t5/Notebook-Operating-systems-and/Windows-7-Upgrade-Guide-for-dv6000-dv9000-models/td-p/179816

• Presario sr2030nx need drivers after the upgrade to windows 7 ultimate 64 bit

  Presario sr2030nx had xp media center edition, I've updated to win 7ultimate 64 bit. my dvd player says he has a few drivers disabled

  There was a pop up on all drivers must be signed, as an unknown device is lack of both pilots.

  Please help me find a solution, thank you.

  That particual error happens because of pilot missing generally regarded as 'Away Mode Driver'

  Here's what I copied THIS post

  Explanation I understand
  
  AMD away mode is a measure of the implementation of some energy-saving AMD processors. It is a measure not very well known and the reason the PC is slowly put one out of State a device at the same time leaving a PC race that looks like it is off. Not a very good idea!
  Drivers were provided by a card mother manufacturers were also built in Vista, they are not provided with Windows 7 x 64 and as I already mentioned Gigabyte.
  No no not this driver does not affect the performance of the PC

• Cannot connect to internet after a reboot before you uninstall and then reinstall the network card. (After the upgrade to Windows 7 from Vista)

  This problem started immediately after the upgrade to Windows 7 Ultimate (32 bit) to Windows Vista Ultimate (32 bit).  Again, I want to remind that I never had this problem before installing Windows 7.

  -After a reboot, I am presented with the impossible to connect the network indicator (yellow triangle with!) in the task bar.  (It was how I was welcomed after the installation of Windows 7 is said by the way).

  -The only way I found to regain connectivity is to uninstall and reinstall the network via the device manager card, date at which the computer always successfully connects and remains connected until the next reboot.

  Network card: Realtek RTL8168C (P) / 811C (P) Family PCI - E Gigabit Ethernet NIC (NDIS 6.20)

  Driver provider: Microsoft
  Driver date: 14/05/2009
  Driver version: 7.2.1127.2008
  Digital signer: Microsoft Windows

  Thus, we have solved the problem! There are two possibilities of your problems:
  1 company Adobe uses the Bonjour service , this service should be disabled.
  Computer > Manage > Services and Applications > Services => find the bonjour service (sometimes stated as long numbers), stop service and if the Disabled value. It works!

  2. If it is not signed as Bonjour service. Try to disable the service:
  Shutdown mDNSResponder .exe (he is represented by # Id_String1.6844F930_1628_4223_B5CC_5BB94B879762 #).

  It is installed with Adobe software. If you upgrade the Vista, it will generally many users problem!

• Re-install Windows 7 after upgrading to Windows 7 Ultimate

  Hello

  I bought this computer 4 years ago, it came with Windows 7 Home Premium (64 bit) preinstalled. About a year and a half later, I bought the upgrade to Windows 7 Ultimate. Well well, long story short, I messed around with some settings (without a saved image), and I am looking to re - install.

  Now, here's my question. The key of Windows 7 Ultimate upgrade will still be usable once I re - install Windows 7? And if not, will the OEM keys still work?

  The two keys are still usable.

  If you have the DVD of Windows 7 Ultimate, you could install using this tutorial.

  http://www.SevenForums.com/tutorials/31402-clean-install-upgrade-Windows-7-version.html

• Random Blue Screen Of Death after upgrade to Windows 7 Ultimate 64 bit

  I was running Windows 7 Ultimate 32 bit for many years without any serious problem. After the upgrade to Windows 7 ultimate 64-bit I was prey to a BSOD random. Sometimes I can get several BSOD in one day. Sometimes I could get any same-day heavy after multitasking.  The BSOD may occur during any task or when I try to quit. I have the latest drivers and BIOS. I disconnected all my equipment and refurbished it. I used the diagnostic tools to test my memory 4G and my Seagate 1 t SSHD hybrid and they passed. I changed the sata connection cable my HD to the MB. I did a Windows repair (scannow) and also done a repair install and it did not help. Although these questions is past the BSOD after upgrade to Win 7 64 bit, that I suspect may not be associated with Win 64 bit but could be hardware related. Any help to solve this issue will be appreciated.

  Kind regards

  Chris

  All 5 associated with your ATI video driver.

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here