The use of Teamviewer for remote access to another PC from a PC

Similar Questions

• How can I assign the static fixed IP for remote access VPN users

  Hi team,

  I have a requirement to assign a fixed static IP users VPN remote access in ASA, please help how I can achice this

  Thanks in advance
  Mikael

  username user1 attributes

  VPN-framed-ip-address 10.200.115.78 255.255.0.0

• How to use ACS 5.2 to create a static ip address user for remote access VPN

  Hi all

  I have the problem. Please help me.

  Initially, I use ACS 4.2 to create the static ip address for VPN remote access user, it's easy, configuration simply to the user defined > address assignment IP Client > assign the static IP address, but when I use ACS 5.2 I don't ' t know how to do.

  I'm trying to add the IPv4 address attribute to the user to read "how to use 5.2 ACS", it says this:

  1Ajouter step to attribute a static IP address to the user attribute dictionary internal:

  Step 2select System Administration > Configuration > dictionaries > identity > internal users.

  Step 3click create.

  Static IP attribute by step 4Ajouter.

  5selectionnez users and identity of the stage stores > internal identity stores > users.

  6Click step create.

  Step 7Edit static IP attribute of the user.

  I just did, but this isn't a job. When I use EasyVPN client to connect to ASA 5520, user could the success of authentication but will not get the static IP I set up on internal users, so the tunnel put in place failed. I'm trying to configure a pool of IP on ASA for ACS users get the IP and customer EasyVPN allows you to connect with ASA, everything is OK, the user authenticates successed.but when I kill IP pool coufigurations and use the "add a static IP address to the user 'configurations, EzVPN are omitted.

  so, what should I do, if anyboby knows how to use ACS 5.2 to create a user for ip address static for remote access VPN, to say please.

  Wait for you answer, no question right or not, please answer, thank you.

  There are a few extra steps to ensure that the static address defined for the user is returned in the Access-Accept. See the instuctions in the two slides attached

• AnyConnect 3.0 supports IPSec VPN for remote access?

  Hello world

  I've read about Cisco AnyConnect 3.0 issues that it supports IPSec VPN for remote access:

  http://www.Cisco.com/en/us/prod/collateral/vpndevc/ps6032/ps6094/ps6120/qa_c67-622477_ns1049_Networking_Solutions_Q_and_A.html

  I downloaded and installed the Client AnyConnect Secure Mobility Client 3.0.0629, but I'm not able to get the IPSec VPN works. Also, it has no option to use the previous of Cisco IPSec VPN client PCF files.

  Can someone point me in the right direction to get IPSec VPN AnyConnect 3.0 work?

  Thank you in advance!

  Hello

  Takes AnyConnect support IPSEC from version 3.0, but only in combination with IKEv2.

  There is no option to use a CPF file with it and the config should be pushed through a profile Anyconnect.

  More information on this:

  http://www.Cisco.com/en/us/docs/security/vpn_client/AnyConnect/anyconnect30/Administration/Guide/ac02asaconfig.html#wp1325361

  You should also change the ASA config so that it accepts negotiations IKE v2:

  http://www.Cisco.com/en/us/docs/security/ASA/asa84/configuration/guide/vpn_ike.html#wp1144572

  Kind regards

  Nicolas

• ASA 5510 VPN for remote access clients are asked to authenticate on box

  Don't know what's the matter, but my remote access users are invited to join the ASA before connecting to the tunnel. How can I disable this? Config is attached. Thank you all -

  For remote access connections, you can turn off the prompt xauth (user/pass) with the following:

  Tunnel ipsec-attributes group

  ISAKMP ikev1-user authentication no

  -heather

• Scope of the wireless connection for remote access to TimeCapsule

  I use my TimeCapsule as long wireless rather than "create a wireless network, as my ISP does not allow for the time capsule to use as my router.

  I post this question because I would like to access my TimeCapsule remotely and the hard drive connected to it.

  Now I'm Back to Mac enabled on TimeCapsule and what I believe is the appropriate port forwarded port to allow a connection outbound to it, but cannot be accessed remotely to the TimeCapsule. Any ideas?

  

  

  

  

  

  Two problems here:

  (1) the "extend a wireless network" is a defining Apple owner who is only used if the Capsule is wireless extension of the network from another router from Apple. It is not compatible with the wireless to a 3rd party router.

  This parameter must be "create a wireless network" using the same wireless network name and the password of the wireless network FIOS with time Capsule of the FIOS router by a permanent connection, cable connection through an Ethernet cable.

  (2) the time Capsule is configured to act as a router, when it should be configured to act as a "bridge"... Since you already have a FIOS router 'upstream' on the network. If the Capsule is configured as another router on the network, which creates an error Double NAT on the network, and it is unlikely that Back to My Mac would function at all in this type of installation. The setting for the time Capsule router Mode must therefore "Off (Bridge Mode).

  Since the Capsule must be in Bridge Mode to work properly with the FIOS router, it's the FIOS router that must be set up for Port Forwarding. Then, in Bridge Mode time Capsule will cross the FIOS router to your network equipment settings.

• alternatives to LogMeIn Pro for remote access?

  Greetings.  Currently, we have systems in the United States, Switzerland and the Mexico that I supported via remote access using LogMeIn Pro.  We paid for a subscription before free LMI Pro has been abandoned even to appreciate the characteristics of LMI Pro.  But as LMI has eliminated this free service, it seems their subscription rate more than doubled each year.  We currently need remote access to 3 Macs and 2 units of Windows (ew).

  Last year, we paid $174. for the annual subscription in support of these 5 systems.  I just checked on the price of renewal and it shows $349.00 for renewal.  This is getting too expensive!

  Last year, I invested in ARD to support my mother MacBook and the MacBook from an old friend, rather than pay LMI for a subscription in support of these systems.  ARD was a good alternative for these systems, but it is not a realistic alternative to remote systems for charity I help support.  Partly because of the PC, also because what it requires port forwarding in the router and finally because I have to be at my computer to use ARD to access those other systems.  LMI offers the possibility to access systems through an iOS app and can be used by other members of the team of charity, anywhere in the world everyone is physically located.  That's why we have maintained the LMI Pro subscriptions for a number of years.

  But with the perennial increase rate of LMI ridiculous (I think they can take their pricing of Obamacare), I'm on my eternal quest for an alternative to remote access.

  Can anyone offer advice?

  Thank you very much for your review,

  Dee Dee in Florida

  There are:

  -Apple Back to My Mac

  Set up and use Back to My Mac - Apple Support

  -Team Viewer free for non-commercial and paid for commercial use.

  -GoToMyPC, it also works with Mac

• NAR restriction for remote access clients

  Hello

  just a question how to limit access to users for some NAS servers remotely.

  We have an AAA ACS2.6 servers and several 3640 based NAS server for remote user access. Users are gathered in a group to the ACS.

  We have another group, called ISP. The user in this group can use the internet anywhere in the world, they must dial the local number of the given ISP NAS and all the NAS-you pass the authentication request to our CSA. So we can centrally manage direct RAS users and Internet users.

  The problem is that a user to a certain group can use the other dialin facility since all dialin appemps will be authenticated on the same server.

  How can I limit that an ISP group cannot use the SNS outside the company and that he can not numbering at our dedicated RAS server? And RAD regulars cannot use the internet (which is given to the users of the ISP)

  I applied filters in the ACS on the group settings, but could find no ducuments how configure it exactly. Any help appreciated,

  Kind regards

  Balázs

  Balázs,

  Thanks for sharing your experience. I'm sure that it would be useful for others. Yes, browser is a problem for any management software ;-)

  Thanks again,

  Renault

• The managed behind router switch remote access?

  What is the best way to access remotely to a switch behind a router?  I will use a switch SF300, and there is no server.

  For points of access (PA) behind a router, I give each a diffferent LAN address and port number.  In router I have forward TCP traffic with the single port/LAN IP.  Then using the port numbers with the address of the static router, the browser can remote access to the router or the attached AP.  But where do I put the managed switch LAN port number?  Assume default is port 80 and I would change to 8001 to switch #1; 8002 to switch #2; etc.  Could not find this info in the manual of configurtion.

  Hello

  At this point, I would recommend a call to the Cisco Small Business Centre at 1-866-606-1866 support so that action can be taken and your configuration can be reviewed.

  I have reproduced the concern here and I am able to remotely manage my switch SF300 with an RV082 as the router.

  My rule in the RV082 are as follows:

  Creating a custom topic UPnP service.  Create SF300 application name (it is a basic text field and can be any name), 8001 an external port and internal port 80.  I send to the address IP internal SF300 switch and click the check box.  From there on, I select Add to the list.  Once it appears in my list, I then click Save settings at the bottom of the page.

  Thank you!

  Dave

• Disable the redirection of printer for remote users only

  Hi we have a customer's requirement that when users connect to the view platform 5.2 internally (via PCoIP) they are able to get both printers mapped with GPO printing location and all locally connected usb printers. However, when a user is working from outside the LAN you must disable the printer redirection all - they don't want sensitive documents outside of the office printing.

  What is the best way to achieve this?

  In case anyone is interested, I managed to solve this problem using a vbs script, executed using the agent to view GPO RunOnConnect. He questions the volatile environmental variables for the name of the view server connection external access. and if it matches then verifies membership in a group. If not a member of the remote-printing-authorized group it disables services of thinprint.

  strComputer = "."
  Set objNetwork = WScript.CreateObject("Wscript.Network")
  Set objSysInfo = CreateObject("ADSystemInfo" )
  strUserDN = objSysInfo.userName
  Set objUser = GetObject("LDAP://" & strUserDN)
  Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
  Set objShell = CreateObject("WScript.Shell")
  
  '--------------------------------------------------------
  ' IsMember Function
  '--------------------------------------------------------
  Function IsMember(strGroup)
  ' Function to test one user for group membership.
  ' objUser is the user object with global scope.
  ' strGroup is the NT Name of the group to test.
  ' objGroupList is a dictionary object with global scope.
  ' Returns True if the user is a member of the group.
  
  Dim objGroup
  If IsEmpty(objGroupList) Then
     Set objGroupList = CreateObject("Scripting.Dictionary" )
     objGroupList.CompareMode = vbTextCompare
     For Each objGroup In objUser.Groups
        objGroupList(objGroup.sAMAccountName) = True
     Next
  End If
  IsMember = objGroupList.Exists(strGroup)
  End Function
  
  '--------------------------------------------------------
  ' Check to see if client logged into external View Connection Servers
  ' Disable printing if not member of AD Group remote-printing-allowed
  '--------------------------------------------------------
  If objShell.ExpandEnvironmentStrings("%ViewClient_Broker_DNS_Name%") = "GR1VCSV01.domain.net" _
  Or objShell.ExpandEnvironmentStrings("%ViewClient_Broker_DNS_Name%") = "GR1VCSV02.domain.net" _
  Then
  If IsMember("remote-printing-allowed") Then
     echo "Virtual Printing Enabled"
  Else
  Set colServiceList = objWMIService.ExecQuery _
      ("Select * from Win32_Service where Name = 'TPAutoConnSvc' OR Name = 'TPVCGateway'")
  For Each objService in colServiceList
      If objService.State = "Running" Then
          objService.StopService()
          Wscript.Sleep 5000
      End If
      errReturnCode = objService.ChangeStartMode("Disabled")
  end if
  end If
  

• Is the phone call received requesting remote access to solve the problem under Windows a scam?

  I received a phone call requesting remote access to my computer to solve a problem with Microsoft Windows more precisely line X 5.  The call came from Salt Lake City Utah, phone number 801-839-2099.

  I got this phone call once a week.

  Is it a scam?

  It's a scam.  Next time you receive such a call, tell the caller you declare calls to the police as harassment for fraudulent purposes... maybe they'll leave the call.

  http://www.Microsoft.com/security/online-privacy/msName.aspx

  http://www.Microsoft.com/security/online-privacy/phishing-scams.aspx

  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  http://www.mypchealth.co.UK/GuideScam.php

  http://blogs.msdn.com/b/securitytipstalk/archive/2010/03/09/Don-t-fall-for-phony-phone-tech-support.aspx

  http://ask-Leo.com/i_got_a_call_from_microsoft_and_allowed_them_access_to_my_computer_what_do_i_do_now.html

• authentication 802. 1 x on cisco VPN for remote access

  I'm on dial-up VPN (mobile VPN) on cisco ASA5510, now, I want to authenticate remote users via Microsoft IAS (Radius Standard) service. However, I couldn't get through the via protocol PEAP authentication process, and it seems that it only supports PAP that isn't safe.

  Any suggestion on how to implement PEAP over VPN remote access?

  Thank you

  Hello

  Glance atv http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00806de37e.shtml

  It may be useful.

  Best regards.

  Massimiliano.

• Server ezvpn 887 router for remote access

  Hello.

  I'm having a problem with the implementation of remote access using easyvpn server on a router 887.  I followed the tutorials and also used Assistant cisco configuration professional easyvpn server to the configuration but still having a problem.

  I see, but Phase 1 finished, Phase 2 will fail with the following error...

  09:43:26.515 Oct 10: ISAKMP: (2003): check IPSec proposal 8

  09:43:26.515 Oct 10: ISAKMP: turn 1, ESP_AES

  09:43:26.515 Oct 10: ISAKMP: attributes of transformation:

  09:43:26.515 Oct 10: ISAKMP: authenticator is HMAC-SHA

  09:43:26.515 Oct 10: ISAKMP: key length is 128

  09:43:26.515 Oct 10: ISAKMP: program is 1 (Tunnel)

  09:43:26.515 Oct 10: ISAKMP: type of life in seconds

  09:43:26.515 Oct 10: ISAKMP: service life of SA (IPV) 0x0 0 x 20 0xC4 0x9B

  09:43:26.515 Oct 10: ISAKMP: (2003): atts are acceptable.

  09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 the proposal

  09:43:26.515 Oct 10: IPSEC (validate_proposal_request): part #1 of the proposal

  (Eng. msg key.) Local INCOMING = 88.xx.xxx.174:0, distance = 80.177.185.185:0,.

  local_proxy = 0.0.0.0/0.0.0.0/0/0 (type = 4),

  remote_proxy = 192.168.21.12/255.255.255.255/0/0 (type = 1),

  Protocol = ESP, transform = NONE (Tunnel),

  lifedur = 0 and 0kb in

  SPI = 0 x 0 (0), id_conn = 0, keysize = 128, flags = 0 x 0

  09:43:26.515 Oct 10: map_db_find_best found no corresponding card

  09:43:26.515 Oct 10: IPSEC (ipsec_process_proposal): proxy unsupported identities

  09:43:26.515 Oct 10: ISAKMP: (2003): IPSec policy invalidated proposal with error 32

  'Proxy unsupported identities' research indicates a NAT problem maybe, but I don't see where this would be.  In my view, the problem is elsewhere.

  I use the VPN Client 5.0.07.0440 and using transparent tunneling IPSec (on TCP/10000) that the client is located behind a firewall/NAT device.

  Does anyone know what may be the issue?  Attached full config.

  Hello Mick

  Before that, one more try. .

  Remote control the pfs as follows

  Profile of crypto ipsec RemoteAccess

  no set pfs group2

  Remove and add the virtual model crypto back

  type of interface virtual-Template1 tunnel

  No ipsec protection RemoteAccess tunnel profile

  Profile of tunnel RemoteAccess ipsec protection

  I hope this will solve your problem

  Henin,

• How to configure VPN 3000 Concentrator for remote access

  I have inherited a VPN concentrator and want to configure it to provide remote access to my internal laboratory network when I'm traveling.  Private interface is configured as 192.168.1.240/24.  Public interface is configured as one of my public IP addresses.  I have a public IP pool on the back side of a cable modem Roadrunner.  I created a pool of addresses for clients such as 192.168.1.200 by 192.168.1.205.  I created all group configurations, group and user base.

  In the IP Routing tab, I see a default route pointing to my IP address of public gateway - the IP address of my box of roadrunner cable modem gateway.

  Since my VPN client, I am able to connect to the VPN concentrator.  I get an address from the pool and check the details of the tunnel under the statistics section shows IP address correct pool for the customer and the correct public IP address of my VPN reorga

  Jeff,

  According to statistics, it seems that the client sends traffic to the hub, but his answer not get back.

  We need check the hub settings itself.

  I need check the hub settings and that it is a GUI based device so I can't even ask to see the technology and the only option available is to WebEx.

  You're ok with webex, pls lemme session comfortable time id and e-mail to send the invitation, it takes no more time and we will carry it out

  Thank you

  Ankur

• Hyperion Financial Reporting of ports for remote access

  Hello
  Can I know what are the ports should I open to allow remote access to the server Hyperion Financial Reporting for reporting via Hyperion Financial Reporting Studio home pc?
  
  
  Thank you

  You could also have a read of http://john-goodwin.blogspot.co.uk/2013/02/financial-reporting-studio-firewall-fun.html

  See you soon

  John
  http://John-Goodwin.blogspot.com/