the use of virtual cards

Similar Questions

• How can I activate my wifi on the use of cmd card?

  How can I activate my wifi on the use of cmd card?

  Hello Siphomangena,

  Thanks for posting your query in Microsoft Community Forum.

  If you want to enable the Wi - Fi adapter, try the following steps. However, it does not activate or disable the driver of network installed on your computer.

  1. Go to Start, click all programs and open the Accessories.
  2. Right-click on command prompt in the list programs, and then select run as administrator. If you are prompted for an administrator password or for confirmation, type your password, click OK, or alternatively, click Yes.
  3. In the command prompt, type the following command and press ENTER:
     netsh interface set interface name ="Local area connection"enable

     Note: replace the Local network connection with the name of your card, for example, the wireless network connection.

  4. This allows you to Wi - Fi adapter.

  Corollary: Replace 'activate' with 'disable' in the command in step 3 to disable the Wi - Fi adapter.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Warnings on the use of virtual memory machine

  Hello

  Have a question about the difference between ESX 3.5 and vSphere 4. I have 4 vSphere ESX 3.5 and 2 4. On ESX 3.5, the memory usage is much lower, then the ESX 4 for the same machine virtual.

  Example: SVR2003 TS with an average of 20 users defined, running the same application.

  On ESX 3.5: HP ProLiant DL380 G5 with 16 GB of memory, two processors running on 3 GHz (4 logical processors without Hyperthreading)

  Granted memory: 2.134.016 average KB

  Active memory: 313.342,33 average KB

  On 4 ESX (vSphere) HP Proliant DL380 G6 with 16 GB memory, Quad processors running on 2.8 GHz (16 logical processors with Hyperthreading)

  Granted memory: 2.097.152 average KB

  Active memory: average 1.987.864,5 KB

  As you can see there is a big difference in the use of mem. We therefore always mistake alerts and warning of our Center Virtual whiel I can find nothing on the configuration of the virtual servers, as well as on the machine of vmware.

  Does someone had the same problem, and what can we do about it...

  THX

  Walter

  This was thoroughly examined several times.

  See http://communities.vmware.com/thread/211585?start=90&tstart=0.

  Make sure you have the hotfix mentioned in http://kb.vmware.com/kb/1014019 installed.

  Use of the memory of the guest operating system may be overrated on systems Intel that supports technology EPT or AMD supporting IVR technology. This issue may cause alarms memory in vCenter falsely goes even if the client accesses not actively a lot of memory.

• You are looking for the type of virtual card - IE VMXNET / e1000 in MOB

  Hi all

  Can someone indicate where the exact virtual machines virtual network adapter type is stored in the CROWD? I'd like to see if it is listed, but have had trouble finding whether there is indeed available.

  PowerCLI is easy - just do Get - VM | Get-NetworkAdapter can show maps of different types. How can I find this in the MAFIA?

  Thank you!

  Hi Shoganator!

  The concrete virtual ethernet card types are modeled as classes of DataObject VirtualEthernetCardsup. It is in the MAFIA, you have to go through the table of device [VM.config.hardware.device] and click on the individual elements of the array. The table suggests to be key in function and it seems that currently the ethernet cards start key 4000.

  That is clicked once on the entry of the table corresponding to the 4000 button and after the look at the top of the of the CROWD where we can read the Object Data Type. This is the type of the NIC in question.

  Currently four types are known:

  • VirtualE1000
  • VirtualE1000e
  • VirtualPCNet32
  • VirtualVmxNet

  I included a page for clarification, I hope this helps :-)

• problem with vpnclient 64 bit for windows 2003 //442:failed to activate the virtual card.

  Hello

  I need to know is below customer vpn will work for windows 2003 64-bit, according to the release notes I doubt it will work.

  name of the file - vpnclient-winx64-msi - 5.0.07.0290 - k9.exe

  release notes - http://www.cisco.com/en/US/docs/security/vpn_client/cisco_vpn_client/vpn_client5007/release/notes/vpnclient5007.html#wp63537

  WILL take the ip address but does not connect. It is possible some configuration or ASA image issue that her first time, we try to use 64-bit OS, for 32 bit OS vpn client works very well.

  on the pc screen, it says - reason-442: impossible to activate the virtual card.

  Here are the logs of vpn clinet when I tried to connect ASA5520. Version 7.0 (8).

  Cisco Systems VPN Client 5.0.07.0290 Version
  Copyright (C) 1998-2010 Cisco Systems, Inc.. All rights reserved.
  Customer type: Windows, Windows NT
  Running: 5.2.3790 Service Pack2
  Config files directory: C:\Program Files (x 86) \Cisco Systems\VPN Client\

  1 15:38:03.921 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  2 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  3 15:38:03.937 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  4 15:38:04.125 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  5 15:38:04.140 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  6 15:38:09.515 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  7 15:38:09.515 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  8 15:38:10.562 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  9 15:38:10.781 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to activate the 64-bit GOES after timeout

  10 15:38:10.781 27/01/11 Sev = WARNING/3 CVPND/0xE3400029

  The Client was unable to activate the virtual card on 64-bit Windows

  11 15:38:10.781 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  12 15:38:10.781 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  13 15:38:10.781 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  14 15:38:10.859 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  15 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  16 15:38:10.859 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  17 15:38:11.546 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  18 15:38:11.546 27/01/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  19 15:38:11.578 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  20 15:38:40.953 27/01/11 Sev = Info/4 CM / 0 x 63100002

  Start the login process

  21 15:38:40.953 27/01/11 Sev = WARNING/2 CVPND/0xA3400019

  Fixing error socket:-21. (DRVIFACE:1234)

  22 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100004

  Establish a secure connection

  23 15:38:40.968 27/01/11 Sev = Info/4 CM / 0 x 63100024

  Attempt to connect with the server "203.199.30.190".

  24 15:38:41.156 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 0 IKE SA authenticated user in the system

  25 15:38:41.171 27/01/11 Sev = Info/4 CM / 0 x 63100015

  Launch application xAuth

  26 15:39:08.031 27/01/11 Sev = Info/4 CM / 0 x 63100017

  xAuth application returned

  27 15:39:08.046 27/01/11 Sev = Info/4 CM/0x6310000E

  ITS established Phase 1.  1 crypto IKE Active SA, 1 IKE SA authenticated user in the system

  28 15:39:09.093 27/01/11 Sev = Info/4 CM / 0 x 63100019

  Data in mode Config received

  29 15:39:09.312 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  30 15:39:09.312 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  31 15:39:19.937 27/01/11 Sev = WARNING/3 CVPND/0xA340000D

  The virtual card did not recognize the operating system.

  32 15:39:19.937 27/01/11 Sev = WARNING/2 CM/0xE310000A

  Impossible to activate the virtual map

  33 15:39:19.937 27/01/11 Sev = Info/6 CM/0x6310003A

  Cannot restore the file road changes.

  34 15:39:19.937 27/01/11 Sev = Info/6 CM / 0 x 63100037

  The routing table was returned to the original state before the virtual card

  35 15:39:20.109 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  36 15:39:20.109 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  37 15:39:20.281 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  38 15:39:20.281 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  39 15:39:20.578 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  40 15:39:20.578 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  41 15:39:20.953 27/01/11 Sev = WARNING/2 CVPND/0xE340002C

  Impossible to disable the AV 64-bit after timeout

  42 15:39:20.953 27/01/11 Sev = WARNING/3 CVPND/0xE340002A

  The customer does not have to disable the virtual card on 64-bit Windows

  43 15:39:21.437 27/01/11 Sev = Info/4 CM / 0 x 63100035

  The virtual adapter has been disabled

  44 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE300009B

  Has no active IPSec security association: impossible to activate the virtual card (NavigatorQM:936)

  45 15:39:21.437 27/01/11 Sev = WARNING/2 IKE/0xE30000A7

  SW unexpected error during the processing of negotiator fast Mode:(Navigator:2263)

  46 15:39:22.046 27/01/11 Sev = Info/4 CM / 0 x 63100012

  ITS phase 1 deleted before first Phase 2 SA is caused by 'unknown '.  Crypto 0 Active IKE SA, 0 IKE SA authenticated user in the system

  47 15:39:22.046 01/27/11 Sev = Info/5 CM / 0 x 63100025

  Initializing CVPNDrv

  48 15:39:22.062 27/01/11 Sev = Info/6 CM / 0 x 63100046

  Set indicator established tunnel to register to 0.

  Also you need to be in 8.0 code run client Anyconnect.

  --

  Robet

• DM4 Adjust memory used by the Intel HD graphics card?

  I have a Pavilion dm4-1173cl that I updated to 8 GB of RAM.  I use the laptop almost exclusively for software development (MS SQL Server 2008, Visual Studio 2010, Wireshark, etc...).   I also run virtual machines for customer environments, often including their own instance of SQL Server - this is why I upgraded the memory.

  I noticed that Windows 7 x 64 claiming that the (Intel HD) graphics card uses more 1.5 GB, in addition to the 64 MB dedicated.   Is there a way to limit the amount of video memory, the computer laptop complaints?  I want to top it to 512 MB, leaving the rest for operating system/applications.

  On my Dell laptop, it is possible to set the video memory in the BIOS, but it is so limited on this dm4 I don't see this setting.

  Or, conversely, really matter what she?  Is the memory actually available for OS/Apps, if not currently in use by the storage of 3D texture or some - for example?

  It is not adjustable. 1.5 concerts you see is not actually used. It's just theoretically available. This memory is still available for Windows, unless actually used by a video application. In fact, all this will never actually be used and would exceed never 512 megs using real and the more likely, as 128.

• Can I use an SD card with the new MacBook?

  Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

  Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

  On the SDXC - Apple Support and SD card slot

  I hope someone will find an adapter for you.

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• purchase fail because I used to pay by gift card iTunes, so I chose any of the theme of credit card. Credit is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

  purchase fail to cause I used to pay purchase iTunes gift card, so I chose any of the theme of credit card. Credit card is danger, I don't like to pay with this method. Can iTunes gift card can't pay inn - app?

  You should be able to make in-app purchases with gift cards. What happens when you try to do?

• Given to replace my current iphone with a 6s - a trip that I can disable the use of boxes and use a unique sim card data for emails

  Given to replace my iphone today with a 6s - a trip that I can disable the use of boxes and use a sim card only data for email & web.

  If you go to settings > Mobile and less ' use of mobile data for: "turn off all except Safari and Mail

• How do I use my gift card to pay for iPhone SE in the Apple store online?

  Hi all

  I have an Apple Store Gift card and want to use it as partial payment for a new iPhone SE.  The problem is that in the online store Apple UK, I don't see any way the use of the gift card that he has nowhere to enter the card number.

  Can someone shed light on this please?

  Thank you very much

  55brianb

  Call the phone number on the UK Apple Store Shopping help page - http://www.apple.com/uk/shop/help/payments

• NB 500-107-Question on the use of the SIM card

  Hello

  I recently bought a laptop computer as written in the subject, I would like to know if there is a modem integrated 3 g (hsdpa) standard? behind the drums is to enter the sim card but it of so weird, just the map, but it is very loose and obviously doesn't work, after removing the cover that I saw that the sim card is where you do not touch the contacts (as if it wasn't a modem).

  Please help because I don't know whether to advertise in the store.

  Hi swirus152,

  According to the official record on the site Web of Toshiba NB500-107 doesn t have an internal 3G modem. There is even a SIM slot it doesn t average a module 3G internal because the matter will be used for different models according to me and a few other models support the 3G module.

  So if you want the 3G connection, you can use your SIM card with a 3 G USB key that you get very little money. :)

• Portege 3480CT: cannot use the 16-bit PCMCIA card

  Hello

  I had a problem with a PCMCIA card (new media wave jammer, 16-bit) on a 3480 with Win98 & XP.
  The card appears as an unknown device in the "remove hardware" - tool.

  In Device Manager it does not at all appear and Windows did not ask for the driver.

  It looks like a card damaged, but still, this card works fine in another laptop!
  The problem could be related to different areas of memory used by the Cardservice.

  The Cardservice of the 3480 ct seems not be configurable.

  What can I do?
  Thank you

  Hello

  The PCMCIA card doesn't need a driver!
  To my knowledge, you must check the settings in the BIOS!

  On the second page of the BIOS, you should try to change the configuration of device for all devices and in the section of PC card, you must set the controller to Cardbus/16-bit mode

  then save the BIOS settings.

  Maybe it helps

• use the apple store gift card purchase app

  Hello

  One of my friends sent me an apple store gift certificate to buy a game for my son. How to do?

  It seems that the apple store gift card is only to buy apple products. He should have send me iTunes gift card.

  In addition, iTunes and app store are separate apps on my mac os x yosemite. So it seems logical that iTunes gift card are buy iTunes points and can't buy app store points.

  If I can't use it then I send it to him so he can be refunded?

  Thank you.

  Mac App Store: Frequently asked Questions (FAQ) - https://support.apple.com/HT202152

  Can I use an Apple Store Gift card or iTunes Gift Card to make purchases on the Mac App Store?

  ITunes gift cards can be used to make purchases from the Mac App Store. Apple Store Gift cards are redeemable in Apple stores and may not be used on the Mac App Store.

  I don't know if you can go to an Apple Store and buy an iTunes card it.  Note also despite the confusing Apple policy of any appeal 'Apps' now, what you are running on an iPod and you run on a computer are not the same (for now at least).

• Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the arear connection is at the top. Virtually all nearthe fields are dead. I have no problem going into the fields to halfway to the bottom of the screen. Chrome w

  Dead zone near the top of the screen in Safari? Cannot use Safari to log even here, because the login box is at the top. Virtually all of the fields near the top are dead. I have no problem going into the fields to halfway to the bottom of the screen. It comes to Chrome and it works very well.

  I suggest you only begin by taking the measures recommended in this support article.