the user change list of diagrams to run

Hi guys,.

I'm writing an application that will allow users to add the game testing and delays a list in any order, then exicute the relevant schema for each test in order.

I had a play with statemachine arcitecture but cannot make it work.

Any suggestions on how I can go about this?

I want what he consit of a list box whose elements can be added.

Thank you Zac

Take a look at the Machine of State JKI; It is a machine of the State in queue based on a string.  I used it successfully for a while and one of the things I've done during development was to put a text box on the front panel to allow me to create sequences on the fly.  It requires a bit of work to learn, but it is well worth the effort.

All you need to do is type in the sequence of States that you want to run interactively.

Tags: NI Software

Similar Questions

  • Value change event, be it be programmed to trigger only when the USER changes the value?

    The structure I set up is the following, I have a control in which the user chooses a value when they choose this value, the value change event takes place setting in the device. Then I am bed in unit values and display them in this control via a property node.

    My problem is that whenever I read back a new value in the control, he takes this as a value change event and resets the value within the system, is it possible to make this event don't move when the user changes the value?

    Yes!

    My thoughts are that you use a Value property (signalling) node to display for the control. That will trigger another call to event.

    Use the NO signs of property value node or a local variable.

    Your postal code, if this isn't the case, then we can help you understand what is happening.

  • Windows 7 fail to recognize new password after that the user changes

    Hi, I have this weird problem, until now happening in Windows 7 machines in a domain Active Directory.

    A user who changes his password at any time before the expiration of the password and the message indicating that the change has succeeded appears as usual. However, after the closure of the current session, disconnection and/or same as restarting the computer where the user has changed the password, he or she is unable to connect with the new password, the computer will only accept the old password. Things don't stop there, if the same user tries to log on to another computer (where he worked before), he rejects the new password with the message "user or incorrect password" as well, but again only accepting the last password used in this second computer.

    A friend at work discovered (by pure chance) that run a MalwareBytes (hereinafter MB) scan and remove all detected items eliminate the problem, not immediately, but after a computer restart. I did the same thing with another user but took my time to browse the list of detection MB and I found that all detected items were related to domain policies legitimate registry keys.

    Things already checked:

    -Normal network connectivity.

    -Not all computers are affected.

    -All affected computers are running Windows 7 Pro x 64.

    -Users who have never used the affected computers can connect without a problem.

    -Users who are unable to connect the affected computers can connect to other computers, they have ever used without problem.

    -Computers have been restarted before using MB, but the problem persists.

    -Checked the names of registry keys, but could not find one related to the connection of the user.

    So my questions are, why this computers only validate against the local SAM? What other things can check to validate what happens?

    Thank you.

    Julio D.

    Hi Julio,.

    Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

    I suggest you to send your request in the TechNet forums to get the problem resolved.

    Please visit the link below to send your query in the TechNet forums:

    https://social.technet.Microsoft.com/forums/en-us/home?category=w7itpro

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

  • Name of the user change folder

    How can I change the name of the folder of the user?

    I have the MacBook Pro (retina, 13-inch, early 2015) + OS X EL Capitan + a user (Administrator)

    You will need to change your username.  Go to Preferences system-> users and groups.  Click on the padlock at the bottom on the left and enter your administrator password.  Right click on your account name on the left side of the pane.  Select 'Advanced Options '.

    Where it says "Account name", you'd change it to what you want it to be.

  • Disable the user change your picture account

    Hello.

    I have several users cast in place on my login screen. I have set permissions through gpedit.msc so that they use a fixed theme and cannot change any part of this theme. Indeed the customization is "gray" for a user.

    I put a different picture for each user name to help to have identify which icon to click to connect.

    I would like to deactivate a possibility to users to modify or to change the image that I put.

    I don't want to use a default Windows image to the standard address, and I don't want all users to have the same image.

    So, as in the image on the screen, I want all the images the user to stay as they are now.

    With gratitude any help appreciated.

    I'm not sure how much power you want your users to have, but maybe you can just set the policy to stop them from using the Panel at all.  Then they will not be able to edit the image (or something else).

  • Sound signal when the user changes the status?

    Hello everyone!

    I'm quite new to Acrobat Connect Pro in the role of a trainer. It ist one feature miss me: an acoustic signal or notification when a user changes his status.

    For example, Users must satisfy a task that takes several hours. Coach, I'm online all the time to help as needed. But I need to watch my screen all the time for notice if someone has a question. I would like, there will be some sort of sound signal. Is there something like this? If this is not the case, this could be a feature request.

    Greetings

    Marcel

    To use the doorbell pod to connect, simply download the SWF to a sharing module in your room (even by uploading a JPG or PPT). Should that pressure manual button when someone 'status' changed, but that may be the method of the student to notify you that they are made to their task.

    If you feel that you need the exact feature you described above, you can check to build your own custom pod (should you be savvy with AS3) using the Collaboration Builder SDK found here, Adobe Acrobat Connect Pro | Adobe Developer Connection, or you could reach to one of the groups which proposes the establishment of custom pods. ActiveC is one of these companies, custom - development ActiveC.biz.

    Connect is unique in offering the possibility of creating your own functionality should the default options does not meet your needs.

  • How can I score points defined by the user in amplitude / frequency diagram?

    I have a table of frequencies and amplitudes. I need these values to display frequency values on the x axis and axis is amplitude. a default fixed parcel must be constantly visible in the graph, and then I want to score a few points defined by the user in the same graph, save these two plots in the same graph and then make a mark on the chart.

    Help kindly it's about my master of engineering project where I am trying to biuld an audiometer (to test hearing sensitivity) and I'll interface with microcontroller ardiuno labview and my hardware devices.

    so kindly help.

    Thank you.

    rich

    The points defined by the user might just be another plot.  You can add annotations to a conspiracy, but it's a lot of work.

  • Windows XP logon screen - Pro - can the user's list be oriented horizontally rather than vertically?

    I would like a list of the Windows XP logon screen - Pro User horizontally rather than vertically?

    Windows-7 lists horizontally and allows several user names be seen without scrolling down.

    Windows XP - Pro can be modified to do the same thing?

    Sorry Mike Lynch, but you can not list horizontally. But try to use aWindows 7/Vista theme. It can the list of users the list horizontally.

    I hope I helped!

    -MIFRAS

  • Computer cannot connect to internet after the user changed network name

    Original title: "Network__".

    We offer free wifi in our lobby and yesterday a man asked our pin # so he could get on the internet, we discovered after leaving one of our computers cannot connect to the internet as the name of network now shows its computer network and it has need of a code key passes and the password , how can we disable and back to ours?

    You gave your PIN #?
     
    There should be a reset button on your access to restore your system to
    by default. Of course, you will then have to re-enter many of your
    security data, unless you have saved it.
     
    "Artic Auto Air" wrote in message
    News: 92aa11d3-77ea-4680-b04c-c415b59e2c66...
    > We provide free wifi in our lobby and yesterday a man asked our pin #.
    > so he could get on the internet, we discovered after leaving one of our
    > computers cannot connect to the internet because the name of the network shows now
    > like its computer network and there need a code key passes and the password, how
    > We turn off and back to ours?
     
     
     
  • How to update the table when change list item in the classic report

    Hello
    I worked with apex 4.2 and I create normal classic report with list (named loved) select a column, now I want to update the table when the user changes the list with the new value, I can't create a dynamic action to do this, I create checkbox with the primary key and the loop for check point to update the table but I can not get the value of the list item. and for more speed, the user want to do it when changing the value from the list.

    My question
    1. how to do it in javascript and get the value of the list item and update the table with the new value
    2. do I have to use the API to create the list item so I can get the value of the report item or what.





    Thank you

    Ahmed

    You can find a lot of information in this forum (and outside in google) when you search for AJAX processes and demand. However, the tutorial in the link below should be useful:
    http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/DB/hol08/apexweb20/ajax_otn.htm

    BTW, if we answer your question, don't forget to mark the appropriate post as correct. It will help all of us in the forum.

  • [OIM 11 g] How can I send a pwd has changed in the ad to the user of the IOM account?

    Hi gurus,

    I work in a CEP. I have AD and AD Pwd Sync connectors and connector DBAT installed.

    IHAC who expected to see the following behavior on the management of the users password:

    (1) when the user change password on behalf of IOM, this password must be propagated to all targets (AD and DB table).
    Ok... I had the behavior.

    (2) when the user change the AD account password, this password must be propagated to the user IOM account (therefore this password will be propagated to all the goal)...
    How can I do to achieve this?
    With AD password synchronization, I can just sync the password between the target and resource password form.

    Note: AD is not the Source of confidence. The announcement should only be trusted for the password source.

    I would appreciated any help.

    Best regards.

    Edited by: user12295533 09/01/2011 07:05

    It seems that the connector has changed since the last I used it about 4 years ago. You will need to create additional tasks and the logic to handle this. When password on the form AD process changes, you will have to also compare the password definition as well. And if they are different, then you will want to reset the password on the user form. When runs in your task to change the user password, it returns the same password to the form of the user of the AD, which then will not do anything because there will be a real change on the ground, which means that the update of password does not work. And then you also have your task to change the password on your other resources that will send the new password.

    -Kevin

  • The values of list box dropdown legend value changes

    Hello

    I have a combo box with 2 fixed values, and when the user changes the value I want the text caption for the fields on the screen to change automatically. I saw this post http://forums.adobe.com/message/3358411#3358411 and did something similar but despite no error on screen legends are not changed.

    The formcalc code I have is:

    If (DropDownList1.rawValue is "1")

    then NAME2.caption.value. #text = $record.IS_DATA. PERS_NAME2_CAPTION

    else NAME2.caption.value. #text = $record.IS_DATA.COMP_NAME2_CAPTION

    endif

    I also tried to use resolveNode:

    If (DropDownList1.rawValue is "1")

    then xfa.resolveNode("NAME1.caption.value.#text").value = $record.IS_DATA. PERS_NAME1_CAPTION

    endif

    This is encoded in the OUTPUT from the drop-down list event list1. The background to this is that the form is generated from a SAP user interface and interactive.

    If someone can see what I'm doing wrong / missing? -Is this something that should be possible?

    Kind regards

    David

    Hello

    Unfortunately he's changing Javascript does not work either. However, I have discovered that on the side SAP I was not having filled all the parameters of the system and structure of type SFPDOCPARAMS has a field called DYNAMIC inside. Once I put my original code worked :-)

    Problem solved! Thanks for your help.

    See you soon,.

    David

  • Accept the user SQL and run batch

    Hi all

    I want to invite the user to enter their SQL and run it during the execution of a batch file.

    Results (after the running .bat file):

    Press any key to enter your sql

    -will be here sql user input

    You SQL statement has been executed successfully.

    Try:

    SET /P DB = [promptDBname]

    SET /P USER = [promptuserName]

    SET /P PWD = [promptPass]

    SET /P sqlText = [promptSQL]

    sqlText %Echo% > script.sql

    sqlplus %USER%/%PWD%@%DB% @script.sql

    Perversion!

    ----

    Ramin Hashimzade

  • Rows should be changes based on the value of the user

    Hi Experts,
    In my reports to the Table has more than 1000 rows and 5 columns as below

    Date - Media - Station - MediaSpend (Amount) - PlugAmount_
    10/10/09 - AAA - DAC - 100-20 (Eg., 100 / User_Value)
    10/10/09 - AAA - FAB - 150-30 (Eg., 100 / User_Value)

    .
    .

    Our requirement is we (User) a column need to enter User_value (perhaps number or decimal).
    based on User_Value the PlugAmount must be changed IE MediaSpend / User_Value

    Examine if User_Value = 5 then all the values of the PlugAmound line should change, as wise whenever the user changes User_Value the PlugAmount also changes.

    Please help me, how can I solve this problem.

    Thanks in advance
    Oldia...

    Published by: oldia on October 20, 2009 04:58

    Published by: oldia on October 20, 2009 05:00

    Published by: oldia on October 20, 2009 05:01

    If the writing/sets of users quick dash User_value then edit dashboard box INT type prompt, for example write 1 in the edit column formula, put a label and set variable presentation, for example name pv_int_var.

    Responses in the PlugAmount * MediaSpend/@{pv_int_var}*.

    where @{pv_int_var} is a variable presentation.

    You can avoid division by zero:

    {Case when @{pv_int_var} = 0 then null else MediaSpend/@{pv_int_var} end

    Concerning
    Goran
    http://108obiee.blogspot.com

  • Identification information of the user of Linux for backup

    Does anyone have suggestions/advice on the creation of the user for backups on Linux using AppAssure machine?

    Unfortunately the previously "verified the answer" has only half of the answer: it shows how to add a user, but the customer AppAssure also has a group that the credentials of that user MUST BE a PART of otherwise when you try to change your username to talk with her on the servers AppAssure, for example if you change your admin or AppAssure username for any reason any It will reject constantly as a name of user and password error. To check if your new user name exists on the client Linux, log in there and make a sh/etc/passwd to see if it is already there in the list of users. If this isn't the case, add with the command 'NouveauNomUtilisateur' useradd as Anton K said. Then set the password for this user by typing passwd "newuserrname" and it by tapping twice and he will confirm that the token has changed (in CentOS anyway). Trying to connect from the AppAssure server will still get error log until what you add to the Group appassure however. Note: when you first install AppAssure it prompts you for the user accounts that you want to run it. This is how you can change that any time thereafter (to save removing and then reinstalling the AppAssure client s/w and a production server restart). Use a text editor vim and vim/etc/Group and look to the bottom of the list for the group 'appassure. If your new user name is not on this line you will need to set the mode insertion (I) and add the NouveauNomUtilisateur (no space) followed by comma and make the Esc and: wq to write the changes and exit stage. However, it still won't let you connect from AppAssure Server UNTIL you stop and restart the service of AppAssure. This typing stop appassure-service agent and then start appassure-agent. Note: You can also access this service any time, that you aren't sure typing appassure-agent service state. After the new user name is added AND the new user name is added to the Group appassure AND appassure-agent service is restarted, you will find that you can now connect the AppAssure server on the client using the new user name. :)

Maybe you are looking for

  • Re: S50T-B Satellite - cannot activate pre-installed 8.1 Win

    My friend Sherry bought a Satellite S50T-B pspq8a - 00 h 008 laptop for Christmas in Canberra and he brought back to China. Now, she concluded that the system cannot be activated via either online or by phone. When trying to activate online, she rece

  • AVI files

    Doesn't seem like a Mac (Imovie) recognizes an avi file created by a PC. Any who have the same experience and how to overcome it?

  • CAN and XNET successively

    Hello I try to use NI-CAN and NOR-XNET successively on the same CAN bus. I programmed and tested functionality with NI-CAN and NOR-XNET, everything is OK. But I can't run the two parties successively... What I do: -initialization of the CAN bus (CAN0

  • HP pavilion DV6 6185sm

    Need help. I have HP pavilion DV6 6185sm and cooling fan no longer works. Well, I bought a new. HP SPARE PARTS MPP-650847-001. I just need to replace the fan. The question is, this heat sink has the good fan for my laptop. Thanks in advance, best reg

  • Problem delete windows.old

    I can't remove an older version of windows. Windows.Old - it's my personal computer, but I'm being denied permission - what can I do? The computer is my own staff.