The user profile Service has not logon. User profile cannot be loaded. (I am the administrator)

Similar Questions

• The user profile service has not logon. User profile cannot be loaded.

  This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• The user profile service has not logon. User profile cannot be loaded error message

  original title: user profiles

  I have recently all of a sudden can't open my user profile. When I put my password in it reads that the user profile service has no logon. User profile cannot be loaded.  I am the Administrator without getting on my user profile, I can't do anything. How you start in safe mode? I really need help!

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• error message after you enter the password to logon bed - the user profile service has not logon. User profile cannot be loaded

  I can't log on Windows Vista

  Hello

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the Admin account hidden to lower your user account APPLY / OK then wear again to
  ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
  above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
  password (or two with the same password) use a test or difficulty to another.

  You can run the Admin account hidden from the prompt by if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• The user profile Service has not logon. Unable to load the user profile?

  Hello

  Everytime I try to log in my account I get this error. IM an administrator but he is also another account Admin I tried to create a new account and copy all the files from my old to my new account, I managed to make a new account, but when I tried to search on Windows Explorer, it didn't appear. I then disconnected and tried to access the account again, but when I did I got the same error?

  I also tried the system restore but still no change.

  Help, please!

  Thank you

  Hi Natstar,

  1. How did you create a new user? What is an account belonged to the group administrator or standard user?

  2. this problem occurs with the current user? You receive an error code?

  For your error message "the user profile Service has no logon. Failed to load the user profile"you can refer to this link:

  http://support.Microsoft.com/kb/947215

  Check with a different user profile if the step above does not work.

  http://windowshelp.microsoft.com/Windows/en-US/Help/769495bf-035c-4764-a538-c9b05c22001e1033.mspx - to screw a profile user corrupted

  Hope this information was useful.

  Let me know if it worked.

  All the best!

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The user profile Service has not logon.

  I just added a new HD and a new installation of my HP Win7-64. I had to remove the disc and go back where I was before the update of the material. Finished with a dual boot? Win Vista - Win 7 (recovered) in the script. When I boot Vista (although it looks like Win7 and says on the screen) I get on ok but when I try to choose the Win7 (recovered) I get a failure at the level of the Office of logon "user profile service doesn't have the logon - user profile cannot be loaded.» The user is "Tom." I look at profiles of properties-user-computer and see C:\users\Tom - C:\users\updatus to-C:\users\Admin. I remove the Admin because it was the only one that Windows would allow me to remove. That did not help the problem of logon. I looked in the registry and see user users\Tom & users\updatus it.  Another road, that I took was advanced system settings. -Prof. of the user and I saw 'by default profile - 14/09/09 - Home\Tom - 11/12/12 & Home\Updateus User - 11/12/12. (1) what should I do with this problem of user profile and how do I get the ability to dual boot with Vista or Win7.

  Thank you...

  Tom

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-service-failed-the-logon/2b0e4ade-f635-43b3-86BA-2aca393156b6

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/the-user-profile-service-service-failed-the-logon/dbd48a1b-4858-4781-b9fd-7df38c2db100

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/the-user-profile-service-service-failed-the-logon/13867a67-90f5-4593-a4be-359e8d678eb8

• error message «...» Service user profile Service has not logon. User profile could not be loaded"windows will not start

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.

  Help, please

  Please use this tutorial:
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• the user profile service has not logon. TouchSmart 300-C

  Can not connect.  Given message: the user name or password is incorrect.  Entered the correct user name.  Don't have a recovery disk to reset the password.  Other options?

  Hello

  You can try the following.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the PC.  Tap away at f8 that you start the PC to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Error: "the service user profile service has no logon. Unable to load the user profile.

  Original title: can't log on...

  When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...

  Hi, Thunderrad25,

  Are you able to get into Safe Mode?  Try a system restore.  Select a date prior to the incident happening.

  These can be useful as well-

  A temporary profile is loaded after you connect to a Windows Vista-based system

  http://support.Microsoft.com/kb/947242

  The user profile Service has not logon.  View user profile cannot be loaded.

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

• the user profile Service service has no logon failed to load the user profile

  I received the following message when I try and log in my account to have:

  The user profile Service service has no logon failed to load the user profile

  What are my options?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Cannot open my other user accounts... Download the message, that the user profile service service has no logon. cvannot loaded user profile

  Having only one administrator user account. All my other user accounts will get the above message. Help, please.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• In Vista, get the error logon "user profile Service has no logon. Unable to load the user profile.

  I can't logon and I get the notice.  The user profile Service has not logon. User profile cannot be loaded.
     
  PLEASE... HEEEELP.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Husband can no longer connect computer. Message reads ' the user profile service has no logon. User profile cannot be loaded"

  How can I solve this problem? I have Windows Vista.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• The user profile Service service has no logon. User profile cannot be loaded. error message

  I just installed the three latest updates (04/27/11) and now my desktop computer says "the service user profile Service does not log. User profile cannot be loaded. "Does anyone have any suggestions. I now use my laptop because I was the only user on the desktop, there is no way to get on it now.

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile