The user profile service has not logon. User profile cannot be loaded.
This showed on my computor someday on my connection, and I am the administrator. So now I can not change anything on computor or backups or add programs or delete. I did nothing before that happened. Any help would be appreciated. I tried safe mode, but that did not solve the problem. I need a simple solution that I'm not terrible with computors. Thank you Sandy
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).
Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.
Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215
How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html
How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html
BE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.html
Use the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.
You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.
You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx
If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).
Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
I hope this helps.
Tags: Windows
Similar Questions
-
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
Original title: cannot use my administrator profile
When loging on my laptop, I get this error when I click on my profile administrator "user profile Service is not the user of the connection profile cannot be loaded. This comes after the password is accepted. The only way I can connect to my computer is one of my accounts of comments. I can't change anything because I can't sign as an administrator. How can I fix? I have a Compacq laptop running Windows Vista
If you cannot connect to your admin account, no tutorials can help you because they need you to connect to an administrator account to carry out the instructions.
See if the following can get an admin account...
Go to Safe Mode...
Restart your computer > immediately and repeatedly pressing the F8 key until you see a black and white screen. The top/down arrow and select Mode safe mode with networking.
Now, while in safe mode, you perform one of the following?
1 can connect to your account admin without the error message?
If so, do. Then do a system restore. Choose a date when you were free to login to your account admin as your restore point.http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/
If the system restore does not slove the problem, then use this tutorial
http://support.Microsoft.com/kb/947215
2. If you are unable to log in to your account administrator in safe mode, you see another administrator next to your account?
If so, you are lucky. This is the built-in Administrator account.
There is, by default, no password.
It could connect and do the system restore.If the system restore is not enough, then perform the tutorial even as above:
http://support.Microsoft.com/kb/947215If you can't do or of what precedes, I'm afraid you will have to re - install your Vista.
-
The above message appears when I try to log in. He only started past today, for no apparent reason. I can access a different account on my computer, but that information is stored on my own connection. The administrator so I cannot get a more far by creating other accounts etc, (which would not have the info I need anyway). Help... I work from home so it's impossible to get anything done. Thank you.
Hello suestev,
Thanks for posting your question on the Microsoft answers Forum.
Please see the Microsoft KB article below for assistance with the error:
KB 947215 - error message when you log on a Windows Vista-based computer by using a temporary profile:
"The user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215I have included several links that addresses the error message for the user profile cannot be loaded.
You profile might be corrupted and needs to be recreated.You can also check the tutorial to
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlGood thread on Technet dealing with corrupted user profiles
http://social.technet.Microsoft.com/forums/en-us/itprovistasecurity/thread/e806dd5d-6764-463e-B181-e3aaee271231/How to fix a corrupted user profile:
http://windowshelp.Microsoft.com/Windows/en-us/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxIf please reply back and let us know if these articles have helped solve your problem or if you still need help.
Sincerely,
Marilyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The user profile service has not logon. User profile cannot be loaded error message
original title: user profiles
I have recently all of a sudden can't open my user profile. When I put my password in it reads that the user profile service has no logon. User profile cannot be loaded. I am the Administrator without getting on my user profile, I can't do anything. How you start in safe mode? I really need help!
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
I can't log on Windows Vista
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the Admin account hidden to lower your user account APPLY / OK then wear again to
ADMIN. This allows clear of corruption. Do the same for other accounts if necessary after the
above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with your same
password (or two with the same password) use a test or difficulty to another.You can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
The user profile Service has not logon. Unable to load the user profile?
Hello
Everytime I try to log in my account I get this error. IM an administrator but he is also another account Admin I tried to create a new account and copy all the files from my old to my new account, I managed to make a new account, but when I tried to search on Windows Explorer, it didn't appear. I then disconnected and tried to access the account again, but when I did I got the same error?
I also tried the system restore but still no change.
Help, please!
Thank you
Hi Natstar,
1. How did you create a new user? What is an account belonged to the group administrator or standard user?
2. this problem occurs with the current user? You receive an error code?
For your error message "the user profile Service has no logon. Failed to load the user profile"you can refer to this link:
http://support.Microsoft.com/kb/947215
Check with a different user profile if the step above does not work.
http://windowshelp.microsoft.com/Windows/en-US/Help/769495bf-035c-4764-a538-c9b05c22001e1033.mspx - to screw a profile user corrupted
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
The user profile Service has not logon.
I just added a new HD and a new installation of my HP Win7-64. I had to remove the disc and go back where I was before the update of the material. Finished with a dual boot? Win Vista - Win 7 (recovered) in the script. When I boot Vista (although it looks like Win7 and says on the screen) I get on ok but when I try to choose the Win7 (recovered) I get a failure at the level of the Office of logon "user profile service doesn't have the logon - user profile cannot be loaded.» The user is "Tom." I look at profiles of properties-user-computer and see C:\users\Tom - C:\users\updatus to-C:\users\Admin. I remove the Admin because it was the only one that Windows would allow me to remove. That did not help the problem of logon. I looked in the registry and see user users\Tom & users\updatus it. Another road, that I took was advanced system settings. -Prof. of the user and I saw 'by default profile - 14/09/09 - Home\Tom - 11/12/12 & Home\Updateus User - 11/12/12. (1) what should I do with this problem of user profile and how do I get the ability to dual boot with Vista or Win7.
Thank you...
Tom
-
THE USER PROFILE SERVICE service failed the logon__User profile cannot be loaded
I read the previous discussions, so what I need is someone who has the patience and the time to walk through Windows 7 Home Premium for Dummies with me. I have a friend who has updated all my software on Windows 7 and has added many other applications for a handsome sum. A FRIEND. I was on my labtop there is only 1 hour returned to connect and I get this message to the CONNECTION SCREEN...
THE USER PROFILE SERVICE service has no logon.
User profile cannot be loadedI'm on the front screen. No office, NO option to use a different connection name, no Director... Just my name and my password. My Blue tutorial button to the left and my red farm option to the right. I can't do all the things I've read on because I can't get the properties... blah blah. I know that I delete anything... I could not... I don't know how. I just need help, restore peace of mind only I get from a busy daily life.
Peuvent some please help?
Hello
This also happened to me in another case. All local users are unable to connect they get this error. For example if I enable comments or create a local user account that is a member of the 'users' group I get this error when you connect using the accounts of the said that has been set with a blank password. However, I was able to use my administrator account to manage my machine. You probabbly deleted your permissions on the "C:\Users" folder or the root of the drive itself. If you have a local account, you can plug this hard drive into a computer with the same OS as slave then add "everyone" group with full control and select inherit permissions from parent. Restart, and then try. I hope this helps. C =
-Julius P.
MCP, MCDST
-
The user's Department failed the logon__user profile cannot be loaded
The service of the user didn't login
User profile cannot be loaded· Restore point:
Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.
Try a restore of the system once, to choose a Restore Point prior to your problem...
Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~If the above does not work:
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx
Difficulty of a corrupted user profile
After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
http://support.Microsoft.com/kb/947242
A temporary profile is loaded after you connect to a Windows Vista-based system
See you soon.
Mick Murphy - Microsoft partner
-
the user profile service has not logon. TouchSmart 300-C
Can not connect. Given message: the user name or password is incorrect. Entered the correct user name. Don't have a recovery disk to reset the password. Other options?
Hello
You can try the following.
Shut down the PC. Tap away at f8 that you start the PC to enter the Windows Recovery Console. Use the arrow keys to select Safe mode and press ENTER. If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore. Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration. When you are finished, Windows will restart as normal in order to check if you can now connect correctly.
Another option if the above does not help is as follows.
Shut down the PC. Tap away at f8 that you start the PC to enter the Windows Recovery Console. Use the arrow keys to select "Start using last good known Configuration" and press ENTER.
Kind regards
DP - K
-
I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.
Help, please
I can't get windows vista to start, because the user profile seems to be corrupted. I tried to start in safe mode to no avail mode. the system recognizes my name and graphic symbol, but does not progress beyond the error message.
Help, please
Please use this tutorial:
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html -
Can not connect - when entering a password message "the service user profile service has no logon. Failed to load profile \User' cannot access start menu to apply the options.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Original title: can't log on...
When I try to connect my computer at home, I get an error message that reads... "The user profile service service has no logon. User profile cannot be loaded. Can someone tell what is happening and how to fix...
Hi, Thunderrad25,
Are you able to get into Safe Mode? Try a system restore. Select a date prior to the incident happening.
These can be useful as well-
A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242
The user profile Service has not logon. View user profile cannot be loaded.
-
the user profile Service service has no logon failed to load the user profile
I received the following message when I try and log in my account to have:
The user profile Service service has no logon failed to load the user profile
What are my options?
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
-
Having only one administrator user account. All my other user accounts will get the above message. Help, please.
Hello
1st thing to try is the system in safe mode restore to before the problem
http://www.windowsvistauserguide.com/system_restore.htm
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode option with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
If that does not solve it read more
read the tutorial below
When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:
The user profile Service has not logon. User profile cannot be loaded.http://support.Microsoft.com/kb/947215#letmefixit
Your user profile was not loaded correctly! You have been logged on with a temporary profile.
http://support.Microsoft.com/kb/947242
If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
Maybe you are looking for
-
Direct printing on 6700 wireless option
I implemented the 6700 for wireless network and all is well with computers. I'm trying to print directly from the iphone Tablet and they indicate the print file sent, but printer does not respond. I see a configuration option that says "Direct wire
-
I chose the Donwloat updates but let me choose whether to install them option. The problem is that they load automatically when I shut down my computer. Under XP I was able to close without having to install the updates, now I don't have this optio
-
When you try to burn a television program recorded on a dvd, I get the error above "sbe server has stopped working" Windows media, then stops and restarts. I tried a clean restart, a restoration of the system, a check disk to dvd etc and all come out
-
Help! Important Word document lost on disk/memory thumb stick
In the last month, my brother has created a huge presentation of Word documents on a USB key (I know, should have been on the hard drive). Now, he can't open all the files on the USB key and many laptops don't recognize it's there. Is there anyway
-
CD/dvd drive does not recognize there is a cd/dvd reading - PLEASE HELP! :)
I had my hp for about 2 years and I now have a problem when I put a disk in the disk drive it recognizes not there an in there. Help, please!