the volume appears to contain one or more unrecoverabble problems

Similar Questions

• What to do about CHKDSK message "volume appears to contain one or more unrecoverable problems".

  My XP Home just quit starting all along.  Previoously before leaving he would do a CHKDSK scan and then go over to start.  Now, it closes a few seconds after the Windows screen comes up with the dots that runs through.  The Windows image stays on the screen, but nothing else happens.  I put in my XP disk to run the repair and got at the C:\Windows prompt after all the various commands of the finish.  Then I typed CHKDSK and Enter.  The first time that CHKDSK has stopped 38% full.  The 2nd time it finished and gave me the error message: "volume appears to contain one or more unrecoverable problems".

  I sure would appreciate it if someone can suggest my next move to get XP running back?

  http://www.computerhope.com/issues/ch001214.htm Hope this helps, Gerry Cornell

• Blue screen and after forced registry errors stops under XP, "volume contains one or more unrecoverable problems".

  Hello!  My computer hung on me for quite some time, so a few days ago I had no choice but to make a closed group.  Now, I can't even as much as screen (with the blue bar and the Windows logo).  I tried the following:

  (a) via the Windows Recovery Console chkdsk.  I tried / p, / r, / f, all give me a "volume contains one or more unrecoverable problems." or something like that.  If I try to install a new Windows, as soon as it "looking for previous versions", I get a BAD_POOL_HEADER blue screen with stop error message 0x000000C2.

  (b) I tried to hit every single F shortcut key, but none would let me go in the recovery console (which is F10 for me) and safe mode (which is F8 for me).  Only the F1 works, who has access to my bios Setup, I think.

  If I jump just the recovery console, I just get a white loading bar, who finally stops loading, and then I get a message telling me that one of my files (windows\config\system I think) is missing or damaged.  I tried after a few steps through one of the Windows solutions to counteract this, but I can't even copy/delete files via the command prompt that it denies access.

  Help, please!

  Hello

  · What is the number and the model of the computer?

  You can check the link below

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/what-to-do-about-chkdsk-message-the-volume-appears/e351d02f-F508-489e-AFDC-988d8ddc462c

  Regarding the BAD_POOL_HEADER error, according to the research of mu, it points to be a hardware problem with the memory or a driver issue as possible.

  We can offer further assistance once you are able to boot XP.  Overall however, looks like some ongoing hardware issues.

• Cannot install Windows 7 error "partition must contain one or more dynamic volume...". ».

  I have windows 7 installed on my pc.

  When I updated my system driver in Device Manager, he demanded to restart.

  When I restart my pc, it does not restart "windows error recovery".

  I tried every possible means to recover my pc, but all fails.

  Finally, I tried to reinstall windows 7

  but, when all the files have been expanded

  After that, he says "windows cannot update Installing boot configuration could not proceed.

  but I am able to start mu computer through safe mode.

  company-hp

  model No. - p6-2020ix

  pls hel me out.

  Original title: partition contains one or more dynamic volumes

  Hello

  Rather than create new threads for each answer, I suggest you post your reply in the main thread. This helps help you the better.

  For your reference, the original thread is:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/partition-contain-one-or-more-dynamic-volumes/c3027f83-5f02-4dd2-802b-2e3d4314edc6

  (1) what is the complete or exact error message?

  (2) what is the serial number and the model of the hard disk on which you try to install the Windows 7 operating system?

  Note: Dynamic disk function is not supported for editions of Windows 7 Home Premium, Windows 7 Starter and Windows 7 Home Basic.

  (3) what is the edition of Windows7 installed in the computer?

  Try the methods suggested in the article below and check after each method:

  You cannot select or format a disk partition hard when you try to install Windows Vista, Windows 7 or Windows Server 2008 R2:

  http://support.Microsoft.com/kb/927520

  Warning for the disk check: when running chkdsk (Check Disk) disk hard, if bad sectors are found on the hard drive and then chkdsk attempts to repair this sector. And if no data is available on this sector can be lost.

  Warning in the BIOS: Basic Input Output system (BIOS) to change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  It will be useful.

• How to search for files containing one or more specific words?

  How to find file or files containing one or more words? Alan Cameron

  Yes, this solution works!

  1. Click on organize | Folder and search options
  2. 'Search' tab
  3. Always search file names and contents (NB: will be a slower search)

  Open a Windows Explorer window

  Otherwise, you could add the location to your indexed locations.

• How to find the absolute position of the end of the text, it can be one or more,

  How to find the absolute position of the end of the text, it can be one or more,

  in the position I need to inseart the image of the size of the font that it friendly ordinary view sequiential - image as custom image

  Please help us find the position of the text, and even for a function more, I demanded the conclusion the text length

  I want to do we will be right and the other will be left how I can I align is their way to find the width of the label or text?

  Thank you

  This should help align your labels layouts, depending on what you did you do could go with absolute layout, docking station or stack (allows you to align the top to bottom or left to right)

  I'm not too sure that everything, however, to determine the length of the text, I would think that you could store the text in a string and then somehow programmatically count each letter & do return a result... not exactly on how to do it but it's an idea

• [Error number: 0x8DDD0018] _ the site cannot continue because one or more of these Windows services does not work:...

  I tried to fix the automatic updates via the following Web sites to ensure that the BITS and the automatic updates function.

  http://support.Microsoft.com/kb/910337

  http://support.Microsoft.com/kb/883614

  The only problem is the history of the update, hidden restore updates, and change the settings appear dimmed.  Please don't tell me not to:
  To ensure that these services are running:
  1. click on start and then click Run.
  2. type services.msc, then click OK.
  3. in the list of services, double-click on automatic updates, and then click Properties.
  4. in the startup type list, select automatic and click on apply.
  5. Verify that the service status is started, if the service status is stopped, click the Start button.
  6. in the list of services, double-click on Background Intelligent Transfer Service (BITS), and then click Properties.
  7. in the startup type list, select manual and click on apply.
  8. check that the service status is started, if the service status is stopped, click the Start button.
  9. in the list of services, double-click the event log and then click Properties.
  10. in the startup type list, select automatic and click on apply.
  11. check that the service status is started, if the service status is stopped, click the Start button.

  I did it!

  Thank you
  gdv925

  Norton Utilities has a section "Manage your Services" where I chose a minimum on commissioning.  I 'restored' Services '' recommended '' and all is good.

• The Volume does not contain a recognized file system

  On my USB connection, windows asks to format. When I try to format... .Windows shoes "Windows is unable to complete the format."

  I don't have all the data in the USB... I want to just format... Please guide me the steps of formatting.

  (PS - 1) I tried to format through disk management, but it does not work.

  (2) I tried various applications... .but they often want activation for formatting.

  Hello

  Thanks for posting on Microsoft Community. You can try to format the flash drive by following the listed below as follows:

  1. Connect your USB to the computer and open Windows Explorer to check the drive letter of the flash player.
  2. Press the Windows key + X on the keyboard, and then select command (Admin) prompt. To open the command prompt in Administrator Mode.
  3. In the command prompt type Format and respective of drive letter and : , then press enter. Example: Format D: (if the letter assigned to your flash drive is D.)
  4. You may be prompted to type the name of the volume. Type the name of the flash player.
  5. You will be asked permission to start the formatting. Type y and press ENTER.
  6. The flash drive will be formatted.

  If the problem persists please perform the same steps on another computer.

  Hope the helps of information. Let us know if you need help with Windows problems. We will be happy to help you.

• When browsing from a page of the site appears "unable to connect" Although no connection problem

  When browsing from a page of the site appears "unable to connect".

  Hi Helen,

  Thanks for posting your query in Microsoft Community.

  Unfortunately, the question is not clear, please answer these questions so that we can understand the problem and help you better.

  1. which web browser you are using?

  2. what site you're talking about?

  3. this happens with all sites or with any specific Web site?

  4. What is the exact error message you are getting?

  5 have had any changes made to the computer before the show?

  If you are using Internet Explorer, follow the steps in the link.

  Can't access some Web sites in Internet Explorer

  http://support.Microsoft.com/kb/967897

  NOTE: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings

  We would be more than happy to help you if the steps above did not solve the problem.

• Error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I came to work today with the following error is displayed:

  February 5, 2014 01:27:19 error ORA-16778: make the mistake of transport for one or more databases.

  
  

  Looks like this error disappeared but now I have the following error:

  February 5, 2014 11:52:40 error ORA-16724: could not resolve the deficit for one or more databases in waiting

  I did some research on the forums and I think I need backup and restore, but I'm not sure.

  Here are some questions that I saw others asking in the forums:

  PRIMARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select current_scn in the database of v$. -871568619

  SECONDARY:

  Select max(sequence#) from v$ archived_log; -24589

  Select max(sequence#) from v$ archived_log in case of application = 'YES '; -24562

  Select current_scn in the database of v$. -870987797

  Select * from v$ archive_gap;

  Thread # Low_Sequence # High_Sequence #.

  1 24563 24563

  Looks like everything is working, but the error is still appearing in OEM primer.

  The issue ended up being with the control file. I followed of many blog posts on how to roll forward the database before and they all said to restore the control file before you recover the database. I followed this paper: http://docs.oracle.com/cd/B28359_01/server.111/b28294/rman.htm#CIHIAADC and it worked as expected. The old control file has had 6 data files that were in a different place than the others. The new control file, I created the primary had all the files of data in one place. After correcting the control to point to the locations correct datafile all started working again.

• I have a new PC with Windows 10 Pro and I leave iTunes every time I gt the flollowing message. "One or more applications use scriping of iTunes interface. Are you sure you want to exit? "All help to stop this would be appreciated.

  I have a new PC running Windows Pro 10 and everytime I close iTunes I get the following message.

  "One or more applications use iTunes script interface. Are you sure you to quit smoking? -If you have nothing will close the application using the script interface and a 20 20 second timer starts. "

  I was wondering if someone can help me with a solution to this?

  What third-party software is running on your computer? Last.FM is one that comes to mind.

  TT2

• Windows Live Mail: One or more of the pictures in this message could not be found

  Normally, I can receive, view and send on, almost all images, photographs and videos that I receive. However, on some occasions and I don't know why it is, I get the following warning Message:

  One or more of the pictures in this message could

  not to be found. When you send this message these

  photos will not be included. Are you sure

  for sent this message?

  YES NO

  I do not understand that at all and I'm not a computer guru, I'm just an old guy who tinkers with his computer and tries to stay in touch with the family. If there is someone who can help me understand this, don't forget, keep things simple and use the word which I can understand. As I said, I'm not a computer guru.

  Thanks for any help in advance.

  Bill

  [Original title: Windows Live Mail]

  One or more of the pictures in this message could not be found...

  It is a painful bug that affected some users of Windows Live Mail since the release of version 2011 in 2010. It happens because the program stops to be able to make the connection between the placeholder image in the body of the message and the attached file. It happens that some incoming messages, including those who have at some point crossed a server AOL, some which were composed in Word, some which came from an Apple computer and so on. Despite having requested and received thousands of examples, support staff have never cooked with an explanation, never forget a cure.

  A search for your error message produced something like 200 discussions on this problem in forum Windows Live Mail. The only reliable solution is to click on the bottom half of the Next button and choose forward as an attachment. This will send the message exactly as you received it. It requires that the recipient can open the .eml files.

  If not, right-click on each image in the incoming message and select record under to save the image on your computer. Then, when you write the forwarded message, remove each image and use the option of the single photo on the Insert tab to insert the image you saved.

• MBR - Volume does not contain a file system recognized - after bootrec options

  I was unable to install the Vista SP2 (as it appeared later, because of a Grub boot loader installed by Linux). I tried to reconfigure the bootloader and the partitions (which allows to boot directly into Windows), but after several bootloader configurations (load different partitions as well as MBR) and some partition resizing (resize incl. NTFS partition). Windows unbootable.

  I tried Windows Rescue Disk:

  Bootrec /fixmbr succeeded

  Bootrec /fixboot did not work until I made the /scanos (including iedentified, after having disassembled the NTFS Linux partition and putting the flag of boot loader in the MBR and the default option of grub in Windows, there are 1 installation of Windows in C:\windows).

  If I then repeated bootrec /fixboot he gave the message that the volume does not contain a recognized file system.

  I also did bootrec /rebuildBCD (after renamed it bcd), ultimately without success.

  In total, the situation of 'better' I reached was either a Windows startup with a cursor flashing something happens (apparently find the partition but not any which boot file or OS); or the spare arriving to determine that there is a partition of Windows Vista, but (following the first option to simply repair the system) 'no errors detected. " The second option here, "Restore to a previous point" refers to that there is no previous such restore point.

  It took me about 24 hours now to finally get SP2 installed, but obviously with only murkier.

  Hi Willem W,.

  I suggest trying the (step 1 in the link) Startup Repair and then manually rebuild the BCD (Boot Configuration data) using Bcdedit.exe (step 3) in the article below and check if this solves the problem

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• increase the volume creates high reverberation as pitch

  increase the volume creates reverberation as high tone sound, what happened all of a sudden andnothing I actually disappear unless I lower the volume. Windows Vista acer aspire 3680, no problem in three years of use.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  Then:

  Go to the Web site of the manufacturer of your computer laptop/computer/Sound card > drivers and downloads Section > key in your model number > look for the latest Audio from Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• USB flash drive receives an error "volume does not contain a recognized file system" in Windows 7

  I plugged my USB on a windows 7. He always invites me to analyze and correct or cancel. I cancelled each time, but I got bored with it popping up each time, so I said to investigate and fix.  A loading screen came so I waited patiently. After that it asks me to format my USB flash drive. I can't format it but because I have files from work to home and all my other personal files out there. So I cancelled the format, but every time that I plug it into my computer it asks t format. I even plugged in on a computer running windows XP and wanted to get in shape. When I try to run it without formatting as it is said, "E:\ is not accessible. The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupted. "My question is... what we Windows 7 to my USB and how can I recover my data?

  This is common with USB drives used on different operating systems. It happens alwaysto me when I use my drive to work (which is managed since my MacBook Pro) on Vista and Windows 7 client computers. Like you, I learned the hard way you must cancel the digitization of Vista/Win7. The only thing to do at this stage is to connect the player to a computer that can read the files OR use the software of data recovery on it to get the files. I believe that Recuva can do it for free. Format the Flash DRIVE, then start again. Either way, you don't want to use a USB key as a single backup of important files because - as you have unfortunately discovered - stuff happens.

  http://www.Piriform.com/Recuva

  http://www.elephantboycomputers.com/page2.html#Backing_Up

  MS - MVP - Elephant Boy computers - don't panic!