the Wacom tablet pressure sensitivity doesn't work anymore

Similar Questions

• Why the rejection of multiple photos doesn't work anymore when you change pictures?

  Why the rejection of multiple photos doesn't work anymore when you change pictures? Does anyone else have this problem? It works on my other Mac but just stop working on my computer laptop pro, I have the latest OS and it worked until a few weeks ago. Thanks for any help!

  Selection of several photos at once enter "9" to reject all still works them for me in Aperture 3.6 on El Capitan.

  Have you tested, if the problem occurs only in an Aperture library or libraries opening?

  Create a new Aperture library to test and see rejection, so it works.

  If it does not work in a new library either, I got trash Aperture preferences.

  In preferences file is now in the container folder in the user's library.

  Try this:

  • Leave the opening runs.
  • Then open your user library and delete the folder complete ~/Library/Containers/com.apple.Aperture/
  • and the ~/Library/Preferences/com.apple.Aperture.plist file

  Your user library can still be hidden. To reveal the hidden user library:

  • Bring the Finder to the front by clicking on the desktop or the Finder icon in the Dock.
  • Select your folder user/home (with the House icon in the side bar of the Finder)
  • With this window in the Finder in the front window, press the ⌘J key combination to bring up the display options.
  • In the view options panel allow you to "show the library folder. That will make your visible user library folder in your folder.
  • Open your folder, then the library folder, then the containers.
  • Move the entire folder ~/Library/Containers/com.apple.Aperture on your desktop. Move the entire folder, not just the content.
  • Delete ~/Library/Preferences/com.apple.Aperture.plist as well.

  Now, restart the Mac, start Aperture and try see your book.  If all goes well, delete the folder on the desktop.

  Re: Viewer has been reduced mode Photobook

• Photoshop CS6 brush pressure sensitivity doesn't work is not on the Microsoft Surface Pro.

  I just bought a Microsoft Surface Pro for Photoshop running on this subject.  I installed Photoshop and tried to make some sketches.  I created a new file and began sketching.  Immediately, I felt as if something was wrong.  I checked my brush settings and saw that the pressure sensitivity was not available.  Everytine I tried to put it on it was marked by an exclamation point.

  Does anyone know if Adobe supports new microsoft pressure sensitive pen, or if there is some sort of definition that I'm missing?  I tried sketchbook pro 2011, and that works surprisingly well with the pen.  I hope someone can help me along here, because if this tablet really can run photoshop, it would be a game changer.

  Microsoft is aware of this problem with their driver software.

  Many other applications (not just Adobe) are also affected.

• ExportPDF used to work perfectly to convert PDF, XLSX, now for the exact same file, it doesn't work anymore

  I bought this for Adobe Reader ExportPDF option and it used to convert my PDF files perfectly to XLSX files.  I went back to the old files that I previously exported, and the tool does more to export my PDF.  Help, please!

  Hi josephm90874850,

  Its a file support the format https://helpx.adobe.com/acrobat-com/kb/supported-file-formats.html.

  Make sure you that you use Adobe Acrobat Reader DC Acrobat Reader DC Learn & Support to export PDF files using Acrobat Reader. Export PDF to Acrobat Reader DC.

  If not try to use the service online at https://cloud.acrobat.com/exportpdf

  Kind regards
  Nicos

• How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen.

  How to solve the problem with the wacom tablet and the polygonal lasso tool. It does not work with a pen. I have install windows 10 and fresh, new drivers for wacom bamboo, could he makes problems or there is a problem of photoshop?

  It should do.  You use one of the buttons of pen maybe?  Just touching wheels with the pen with no buttons or modifier keys.  Press ENTER to close the selection.

  Personally I never use the lasso, Polygonal, but rather just the Lasso tool by using the ALT (Opt) to operate the Polygonal tool.  I also use the mouse instead of the Tablet for the selection of cutting edge.  It is a little too uncertain where the point will go when hovering the stylus above the image.

• Pen pressure simulation doesn´t work more.

  Hi everyone, my pen pressure simulation doesn´t works more. I am a pc user and have cs6 extended 64 bit a a wacom cintiq 21ux with the latest drivers. By clicking on the route of the path, the path have all the same thickness. But it should be thin at the beginning of the end. Can someone help me, please?

  In the dialog box the way you check simulate pressure and in the brush Panel under dynamic form > size Jitter > control you have selected the pen pressure ?

  You don't need a tablet of pressure for the above operation.

  

• The Wacom tablet users

  Adobe should stop all software development, until they make the CS6 Illustrator works with the Tablet Wacom Bamboo pressure sensitive.

  Come on Adobe... It works in Photoshop, get their developer software give you technology. We need to work A.S.A.P.

  I hope that the million user ask for the same service. I know a lot of graphic designer who are also unhappy with this touching material! A purchased design company software designed around bamboo and uninstalled Illustrator on their drawing stations 59. You are not alone in this battle, but you start to sound like Blackberry did 2 years prior to their accident: get your heads of cloud and the needs of your customers.

  Michel Vien

  even my intuos 2 works with illustrator. sure you have the correct drivers installed?

• When I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system."

  Tablet not working help please
  OK so I have a tablet that I use to draw for my photoshop... it worked perfectly fine but when I tried after months of non-use, it won't work. and when I try to open the Wacom tablet properties it says "error a supported tablet was not found in this system." I know that it worked because I installed it but now it's just dosnt work... Please help me because I want to draw again.

  Hi LoverofDrawing,

  I suggest you reinstall the drivers for the tablet on the computer by visiting the manufacturer of the Tablet and check if it helps.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

• what the rotation of shortcut in photoshop for the Wacom Tablet?

  MacBookPro retina. Photoshop CC 2015. Wacom Intuos Pro S.

  Hello

  The Rotation of touch and Rotation of the cycle Touch does not work in my Wacom tablet because I do not have the good shortcut.

  I look around in Photoshop and I have not found.

  
  

  Then I ask the furom Wacom and no response.

  
  

  So, what the rotation of shortcut in photoshop for the Wacom tablet please?

  Antoine,

  I'm afraid I can't help you. I don't know any shortcut to turn in Wacom properties.

  Try the latest version of the driver. According to the website the most recent driver is 6.3.14 (you mentioned another version)

  Did you uninstall your old driver before installing the new? If not, try again because that could cause the problem...

• CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. The other shortcuts work fine.

  CTRL + SHIFT + T doesn't work anymore, I tried it on Windows and Ubuntu. If I go to history > recently closed tabs and click on something, it works, it's just the keyboard shortcut that broke. The other tabs keys work fine.

  Create a new profile as a test to see if your profile is the source of the problems.

  See basic troubleshooting: make a new profile:

  • https://support.Mozilla.com/kb/basic+troubleshooting#w_8-make-a-new-profile

  There may be extensions and plugins installed by default in a new profile, so check that in "tools > Modules > Extensions & Plugins" in case there are still problems.

  If this new profile works then you can transfer files from the old profile to the new profile (be careful not to copy corrupted files)

  See:

  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• Satellite P10, internal keyboard: the key of the pipe doesn't work anymore

  Hello everyone!

  I have a Satellite P10 with WinXP (SP1) for about 1 year.
  Symptoms: it's the internal keyboard. I used the key pipe <|>indeed, not every day, but it worked. And suddenly, I see that it does no more: it is 'dead', while all other keys work correctly...

  My next steps:
  (1) I uninstalled the driver of standard keyboard (101/102 keys) or Microsoft Natural Keyboard (PS/2) keyboard, and were found after Windows starts. There is no material conflict under the Device Manager or the information system, the driver runs correctly...

  (2) the keyboard layout is German. But I have already tested the English (United States) too: the result is the same.

  Questions:
  (1) is the key physically damaged?
  (2) otherwise, what I can do to solve the problem? Where can I get a newer driver perhaps?

  Thanks in advance!

  Post edited by: MischaG

  Hello

  As far as I know that it is not necessary to install a driver for keyboard. The driver is built into the OS. If the button is dead and doesn't work at all, it is probably defective.

  Good bye

• Canon scan to folder (Server 2008 R2) from the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  We have a few Multi functional Cannon, who were able to scan to folder to our file server 2008 R2 server.

  Since the latest Windows Updates (13 sep 2012) it doesn't work anymore...

  Nothing has changed for folders or shares. Actions are like:

  \\fs01\scans\IT

  Shared folder is \\fs01\scans

  Share permissions are full for everyone

  On the COMPUTER folder, only the service and the Canon scanner user have full conrol...

  When I turn off the firewall of Windows on the FS01, it works.

  Can I get a SMB = OK on the Multi functional.

  When I turn on the WIndows firewall, I get a SMB = NG on the multifuntional

  I checked the rules and everthing about file and printer sharing is allowed...

  Can someone please think about what to do?
  Because really don't want to go with Windows Firewall disabled.

  The Endpoint Protection 2010 Anti Virus is installed on the FS01, but given that disabling the Windows Firewall works, I don't think that the Anti Virus has nothing to do with it.

  Update: I tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! So there's something wrong with this one server... But as far as I can see, the firewall has all the file and open sharing of printers of things... And when I connect with the Canon Scan on a PC user I can browse places very well.

  Hello

  "Update: I just tried two other servers 2008 R2 (with also the Windows Firewall on) and it works! "So there is something wrong with this one server.

  Microsoft has specific Forums to help you with your Server 2008 R2 questions.

  Could you please repost this link in Server 2008 R2 Forums.

  "Support for Windows Server 2008 R2"

  http://TechNet.Microsoft.com/en-us/WindowsServer/bb512923

  See you soon.

• I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  I had Adobe Photoshop Elements back in January 2011 and this laptop doesn't work anymore. I was wondering how to get it on my new laptop.  I have the serial number and everything.

  If you have problems with activation, go here: find solutions to activation errors that may occur when you launch Adobe apps.

  Click on contact us in the link if you need to reset your activation. It's when you can't access your old computer and you get the activation limit exceeded message.

• Why ctrl + shift + t doesn't work anymore?

  Why ctrl + shift + t doesn't work anymore?

  The problem is solved in the next Firefox 26.0 and not 25.0/25.0.1

  For playback as Bugzilla is not a discussion forum.

  Bug 858975 - Shortcut key for Inspector is conflicting with shortcut key for undo close tab