The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l
I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.
Hi Mohammed Ehsan Jourah,.
Thanks for posting the request in the Microsoft community forums.
I understand that you need to know how to make a wireless bridge between two different routers
What version of the operating system is installed on the computer?
To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.
A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.
You can try the steps at the bridge between two different routers wireless.
a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.
Links:
Create a network bridge:
http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge
Add a connection to a network bridge:
http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge
Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.
Tags: Windows
Similar Questions
-
Connect between two different applications. A call to the other application.
I would like to know if it is possible to connect between two different applications in oracle apex IE appeal one request for the other? If the applications are allowed even say LDAP.
Yes,
Refer to the post office, requested by me and answered by fac586
How to use one login for all applications in one only workspace
-
How to enable wireless communication between two clients?
I've got a WRT54GL with the latest firmware. I have two computers that are both connected to the router with the IP via DHCP addresses. Nor has a firewall running. I can't communicate with them - even ping does not work. I can ping the router itself by using the IP address assigned to this side WAN by my ISP. Both computers have no problem to reach the internet through the router.
What the router settings will allow communication to occur? I can't find anything in the user interface of the router, which seems to control it.
Thank you.
I just figured out the problem: Isolation AP (in advanced wireless settings) has been activated. I turned it off, and the problem is solved.
-
The space between two different paragraph style
Hello!
I'm working on a book, and I would like to first of all a standard space between two paragraph styles.
I have the paragraph of text and the reference point. I would like to put an extra space when a paragraph of text is followed by a reference point and vice versa.
I usually do it in html with CSS, it's like
p.text + p.citation {pad-bottom: 5px;}
My goal is to have a space between the text and citations, even if citations are multi point (and of course, without any paragraph empty additional)
Is this possible?
concerning
Lila
You probably need to two additional styles to represent the paragraph "first" that uses the text or styles of citation, with spacing before added, and text or reference style defined as following Style, like matches, for each, so that you can use for the first paragraph after a change. You can base teas on current styles and just add space.
-
How to get the value of EV - the diiference between two different columns
Hello
I get the difference between the two different columns of two different... as tables (emp.sal - dept.comm)... all I want is I need only the records that a negative gap how get this? Please help me
Thanks in advanceIf I understand your question right:
select case when emp.sal-dept.comm>=0 then YOUR_VALUE else emp.sal-dept.comm end difference_value from emp,dept...
or do you want to:
select ... from emp,dept... where emp.sal-dept.comm<0
?
Kind regards
Sayan M.Published by: xtender on 19.11.2010 22:29
-
Satellite 2410-304, configuration of wireless connection between two laptops
I need help on lan wireless setup.i don't know what it.i have a s2410-304 and an a10 1514.need something else? If this isn't the case, please write everything on 'how to setup' step by step...
Hello
I think the best way to get comfortable with your Wifi network is to study "how to build a Wireless Home Network - tutorial.Follow this link-> http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan.htm?iam=metaresults&terms=home+hard ware + tools
Good bye
-
Sharing typedefs and screws between two different targets in the same project
Hello
I am writing a distributed application that runs on a PC and a CompactRIO. There are a few data structures and functions of comfort (typedefs and screws) I want to share between them. What is the best way to do? A LVLIB is suited for this purpose?
I currently somewhat anime items shared on the 'My Computer' target. However, when I change my code, I sometimes click on "synchronize with other instances of the application. In addition, the shared items appear on my cRIO target dependencies list. I prefer not to have this happen. is it possible to avoid these?
Thank you!
Actually, I just discovered I can "include explicitly" the same control/VI in different targets, and LabVIEW will not see it as a conflict.
-
How to establish wireless communication between two PCs running in labview
Hi all
Using our PC lab with labview 2010 SP1, we are 2 EC motor with its position controller control.
Is it possible to wirlessly monitor and control this program using another PC with same LabVIEW 2012 SP1.
If so, what are the possibilities?
Is it possible to do using the ad - hoc network?
Of course you can.
As long as you can get both PC to be on the same wireless network, LabVIEW notice that it is a wireless to a wired connection.
You can use shared variables. You can use TCP/IP to send data back.
-
Hello, we intend to make an hors-place upgrade to our 11.1.1.4 to 11.1.2.3 environment. The only thing stopping us is the question of how to migrate 11.1.2.3 11.1.1.4 reports. We have already considered the following options
(1) LCM, LCM is taken in charge only between the same versions are at - it another way.
(2) I know there is an option to export reports in the workspace, but the disadvantage that is that each report must be exported at the same time (atlease how it is in 11.1.1.4). And we have far too many reports to make them one at a time.
(3) I have also considered the possibility of replicating data in the repository Directory (HYPERION_HOME\products\Foundation\workspace\data\RM1_Servername) of 11.1.1.4 to be used as the repository directory in the new version, assuming that reports and data analysis means the reports too. However after doing this I have connected to the new environment and could not see any of the reports.
What other options are there to migrate the reports. Help, please.Teddd wrote:
JohnGoodwin wrote:
No need to delete tables as databases configured on the vesion as well, if you go to the bottom of the road upgrade data replication then select "Upgrade existing to the current version of 11.1.1.4 databases" when not to configure the database.Thanks for the reply of John, I looked at this option. But if I select this option if it does not affect the current 11.1.1.4 environment? Because it is an output level on the spot and we will be maintaining the old environment until we get the new environment to match the old. Thanks again.
Clone the existing 11.1.1.4 databases, point to the clone.
Documentation that should be studied - + "You can reuse the data and the existing database, or replicate the database and data to a new machine." +
See you soon
John
http://John-Goodwin.blogspot.com/ -
Hello
I'm making reference to a column in a different grid with a different database connection. I did some searching in the forums, and it seems that it is a known problem with EN Studio. The problem is that if 2 different database connections have different number of dimensions, then the reference will throw an error.
For example, what I try to do, is below:
In grid2.column [A], I have the following formula:
Grid1. Column [A]
The result is an error.
The ultimate goal is to have a base of variance formula in the grid between grid1 and grid2, who have connections to different database with a different number of dimensions. Is there a solution to this bug? The example of the basic formula is less to:
Grid1. Column [A] - grid2.column [A]
Any help is very appreciated!
Thank you
Tiffany
Have you tried to change the database connection in a row instead of create a new grid?
-
SQL to generate the intervals from date of 6 months each, between two date ranges
Hi all
I looked in the forums, if someone uses CREATE_CHUNKS_BY_SQL for dates, but no luck.
I want to update a table using pieces of dates.
I need to generate date ranges to divide them by pieces.
I have a table where I know that max (sales_date) and min (sales_date).
Lets say max (sales_date): min (sales_date) 01/01/2008: 31/10/2010
I want to break in intervals of 6 months (180 days) as below:
He didn't exactly finish end of the month. Basically, I need these beaches of dates at apart 180 days.chunk_id start_date end_date -------- ---------- -------- 1 01/01/2008 06/30/2008 2 01/07/2008 12/31/2008 3 01/01/2009 06/30/2009 4 01/07/2009 12/31/2009 5 01/01/2010 06/30/2010 6 01/07/2010 10/31/2010
I appreciate if someone can throw some ideas on this.
Thank you
Raj.Hi, Raj,
Sorry, it is unclear what you are asking.
To generate a list of dates starting with min_sales_date and including all the 180 days after that up to (but not beyond) max_sales_date:
WITH got_params AS ( SELECT DATE '2008-01-01' AS min_sales_date , DATE '2010-10-31' AS max_sales_date FROM dual ) SELECT min_sales_date + (180 * (LEVEL - 1)) AS grp_start_date FROM got_params CONNECT BY LEVEL <= CEIL ( ( (max_sales_date - min_sales_date) + 1 ) / 180 ) ;
Output:
GRP_START_D ----------- 01-Jan-2008 29-Jun-2008 26-Dec-2008 24-Jun-2009 21-Dec-2009 19-Jun-2010
December 16, 2010 is 180 days after June 19, 2010, but it is not displayed, because is after max_sales_date, which is 31 October 2010.
I hope this helps you.
Whenever you have any questions, post a small example of data (CREATE TABLE and INSERT statements) and the results desired from these data. -
The router access point wireless bridge
Hi I recently moved into a new building which has a few hot spots for the Internet connection is included in the rental price. I don't have a model of linksys Cisco wireless-G broadband router. WRT54G2 V1 and I am trying to create a wireless bridge between the point of interest (I have my own Unique Internet identifier) the router, which is then connected to my office using an Ethernet cable.
Can I create a wireless bridge, if yes, how can I do this?
Thanks in advance
The router (WRT54G2 V1) does not have a capacity of wireless receiver so you will need a separate ethernet bridge.
Your installation should be like this:
(((WiFi)))---> (((pont Ethernet<-wired connection-="">routeur Linksys<-wired connection-="">ordinateur de bureau))I hope that makes sense. XD
-wired>-wired> -
WAG120N wireless bridge with E1500
I have my internet to come into my WAG120N and out wireless. I want to install a wireless bridge between this and an E1500, so I can connect my TV to the E1500 (via ethernet cable) and have access to the internet. Unfortunately, I can run a cable from the WAG120N to the location of the TV. Then she I can get the E1500 filled the WAG120N wireless, I hope I can work around this problem.
I have updated the firmware on the E1500 bridging support, but from what I can tell that it provides only fill via a cable. Is it far from fill wireless?
See you soon
Mike
1. routers Wireless Linksys don't support wireless connection.
2. either install 3rd party firmware like dd - wrt or tomato or buy a dedicated wireless bridge and connect the E1500 to the bridge. This way, you can also use the wireless in the E1500 for wireless connections.
3. another check power line ethernet. It is often a more reliable and quality solution.
-
E3000 as a waterfall on a wireless bridge router
Can you offer any suggestions on how to implement the next network. I would like to make it's good and I'm ready to buy the right equipment.
Here is a diagram of the structure:
After my research, I realized that normally router B to there should in fact be only a switch, which the IP assigned by DHCP router A to all customers in both networks A and B. However, one of my goals is to ensure that the network B will remain operational, even if the wireless bridge loses its connection to A router and Wan. It seems to me that the best way to proceed is to use a router instead of a switch to Y. It is not necessary that B Network Clients see Clients in the network has only access to the WAN is required. In addition, network B Clients must communicate to 1 GB (there is a NAS box) and I do not want their throutput to be constrained by the speed of wireless bridge.
Can I use an E3000 router B to Y, and if so how should be configured. I understand that I must give another IP address that the router has to X. The challenge for me is to know how to configure the network B so that it is independent from the router except for internet access. I have to configure each network on a different subnet?
In addition, the wireless bridge link must be distinct from wireless networks and B. Is it possible by simply assigning their own SSID wireless bridges and routers wireless in A and B different SSID?
Thank you
Andrew
Thanks for all the help!
-
WRT1900AC cannot see Wireless Bridge
Hi all...
I have a WRT1900AC (FW 1.1.8.161917) the router and wish to connect a wireless bridge that is connected to my DirecTv box. I have an old WRT54G ver 3.1 running DD - WRT which I did in a wireless bridge. I have good connectivity to and from the DirecTv box, but no connectivity to my gw wireless which is my WRT1900AC. The WRT1900AC can't see the wireless gateway that is. I have triple checked that I have the identifier SSID is correct and the security in the WRT54G wireless setting and even tried to use an old bridge G from Linksys to connect wireless and the exact same problem occurs when. No device can see other wireless. I suspect the WRT1900AC as the source of the problem. Wireless gateways both try to connect 2.4 Ghz radio.
Any ideas? Thanks in advance.
-Andy
Reset the DirecTV box and we're ready now.
Maybe you are looking for
-
I have problems of space on my iPhone 6, I have only 21 photos and 2 videos on my phone. However, I am part of a chart group on whatsapp. The problem now is that my storage space is almost full. How can I create more space for photos and everything?
-
can I download games on my sony walkman nwz e475
I just want to know if there is a way to download more games on my walkman nwz e475 and if so, how...
-
Qosmio F750: windowed mode 3D available again!
I just wanted you to know that when you use the latest NVidia beta driver, you will also be 3D mode in glass applications (not only fullscreen) new! Download the driver beta here: [http://forums.laptopvideo2go.com/topic/29209-v29573-windows-7vista-64
-
Audio fluctuations with Beats Audio on 15p045nd. In the case of any IDT devices.
Hello I got boring fluctuating audio on my new 15p045nd with beats audio. It seems that if there is some kind of current compression. Or its a sort of gizmo "loudness" automatic Well, what kind of bat 'Optimize' this sucks... I get rid of him? Its i
-
When I turn on my desktop computer, it goes directly in chkdsk mode. When it comes to 49% last step 5, it freezes. So I find myself with the blue screen with a white print and nothing it moves! Maybe someone knows how can I break the cycle to start n