The Web chain control service

Similar Questions

• Vista freezing on the web and Control Panel

  My laptop keeps freezing today.  It's freezing in the control panel in safemode, on Firefox.  This is what I was able to access today.  I get the message not responding and the blue ball of spinning.  Leave and he begins to respond again hope does not work.  Reboot does not work, two updates that were installed last night the uninstall does not work.  It was working fine last night, but this morning, after these two updates were automatically installed, nothing works.  I can view a page or screen or two and then it freezes.  I did a reboot, several reboots, safe mode.  Nothing works and I get fed up with hours of this.
  I am running Vista on a Dell studio, bought in December.

  Hey HeidiJoH

  When it was working fine without freezing?

  You remember recent changes to the computer before it started?

  If the computer was working fine before, you can do a restore of the system on your computer. Here are the steps on how to do a system restore:

  To restore the operating system to an earlier point in time, follow these steps:

  Click on start toreduce this top t, type System Restore in the Search box, and then click System Restore in the programs list. If you are prompted for an administrator password or a confirmation, type your password or click continue.

  In the System Restore dialog box, click choose a different restore point, and then click Next.

  In the list of restore points, click a restore point created before you started having the problem, and then click Next.

  Click Finish.
  Here is an article that will give you information about the system restore:

  http://support.Microsoft.com/kb/936212/
  The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Try to do a system restore and let us know if it works.

  Thank you.

  Kind regards

  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.

• Toshiba laptop problem after Gaming/Windows Update.__No solution on the web.

  Hello! I use a Toshiba laptop.

  I was playing a game and windows update popped up!

  He has not yet finished, and my computer turns off. It was late in the night, so I decided to start the computer the next day.

  He will appear with the options
  'Safe Mode '.
  "Safe mode with network.
  "Safe mode with command prompt.
  "Last good known Configuration".
  "Start Windows normally".

  Whichever one I choose Windows XP logo appears, then crashes immediately, restart.

  So I tried to use "do not restart in case of shutdown"

  And the blue screen appears

  "stop: 0x0000007e (0x905c49b8, 0xf792b2b4, 0 x 80000003, 0xf792afb0).

  What is this error? I can't enter safe mode by the way!

  Thanks for your help.

  It's http://support.microsoft.com/kb/330182

  Advanced Troubleshooting use the following methods in the order in which they are presented. Method 1: Make sure that you have enough hard drive firstly space, make sure you have enough hard disk space. The Stop error message can be caused by insufficient disk space.

  If you use safe mode or the Recovery Console to start the computer, delete any unnecessary temporary files, Internet cache files, backup files of stored-program files that contain fragments of disk analysis files (.chk files). Alternatively, you can install Windows XP on another hard drive that has more free space.

  If you cannot start the computer, go to the next method to update the BIOS of the computer.

  For more information on safe mode or the Recovery Console click on the numbers below to view the articles in the Microsoft Knowledge Base:

  315222 (http://support.microsoft.com/kb/315222/) a description of the options to start Windows XP in Safe Mode
  314058 (http://support.Microsoft.com/kb/314058/fr/) Description of the Windows XP Recovery Console

  Method 2: Update the computer BIOS if freeing space on your hard drive has not solved the problem, the BIOS might have to be updated. Use hardware and software vendor contact information items that are listed in the "Références" section to contact the computer manufacturer to obtain the most recent update of the BIOS.

  Note When you update the BIOS, you may have to disable the memory the BIOS options, such as caching or shadowing him, temporarily. Method 3: Disable or update device drivers if you have successfully updated the BIOS and the problem persists, on the computer video card drivers may have to be updated or disabled. Follow these steps to troubleshoot video card drivers:

  1. If a driver is listed by name in the Stop error message, disable or remove that driver.
     • If the error occurs during the startup sequence and the system partition is using the NTFS file system, you may be able to use safe mode to rename or to delete the faulty driver.
     • If the driver is used as part of the procedure of starting the system in safe mode, you must use the Recovery Console to start the computer.
  2. If the Stop error message does not indicate a specific driver, update the video card for the latest drivers.
  3. Disable or remove drivers or services that you recently added.
  4. Check the list of Microsoft hardware compatibility (HCL) to determine if the computer's PCI devices are compatible with Windows XP. For more information about the HCL, see the Microsoft Web site at the following address:
     http://www.Microsoft.com/whdc/hcl/default.mspx (http://www.microsoft.com/whdc/hcl/default.mspx)

  Method 4: Remove unsigned drivers if you have updated the video card drivers and the problem persists, or if you cannot start Windows in safe mode, the problem may be caused by a different driver, not signed. Remove all drivers that are not digitally signed by Microsoft. For more information on how to do this, click on the number below to view the article in the Microsoft Knowledge Base:

  316434 (http://support.microsoft.com/kb/316434/) how to perform advanced clean boot troubleshooting in Windows XP

  Method 5: Remove all third-party drivers, you may be unable to determine which third-party driver causes the error. If removing unsigned drivers does not resolve the problem, try to move all third-party driver to the %Windir%\System32\Drivers folder files to another location. Follow these steps to move the third-party driver files:

  1. Use the Recovery Console to start the computer, or start the computer from a different installation of Windows if you have performed a parallel Windows installation.
  2. Create a temporary folder for the driver files. For example, you can create a c:\DriverTemp .
  3. Move all files that do not have a creation date for Windows XP of the 13/08/2001 to the %Windir%\System32\Drivers folder to the temporary folder you created in step 2.

     Warning If the computer relies on pilots third-party IDE or SCSI controller for correct operation, you must identify those driver files and leave them in the %Windir%\System32\Drivers folder.

  4. Restart the computer.
  5. Continue Windows Setup. You can add the files of the driver to the computer, one at a time to identify the faulty driver.

  Method 6: Remove third-party remote control services if you still have the problem after you use the previous methods and the Stop error message contains the name of the file Win32k.sys instead of a file name of the driver, the problem may be caused by a control program to third distance. To remove the service, use the Recovery Console to start the computer, and then delete the file of control service third-party remote.

  -----------------------------------------------------------------
  You can also try running Windows XP disk you and try the repair utility. Please rate me upward if you find my post helpful. Thank you!

• On the vMware vcenter inventory services

  Please someone explain to me clearly the basic function of the vMware vcenter inventory services.

  See you in you inventory vcenter. A lot of guests. And every time you log into the Web client (Inventory service works only with the web client) and try to see an entity it what will do the vcenter? It will enter into its database and rethink the entry for you?

  vCenter inventory service acts as a cache. It stores all recent or entities of the stock near the most used web client. When you access a parameter in vcenter now. vcenter service won't go to its database for the entity. It will be given by the inventory service. This way the load VPXD is reduced to a minimum.

  Doubts over?

• Can someone explain, crawlersys.lck on the Web catalog?

  OBI 11 g, recently I noticed a file in the root of my web catalog called crawlersys.lck. It wasn't there before the start of the referral services, but later, he was there. Everyone has noticed this or can anyone explain this file and its relationship to the web catalog / presentation services?
  
  Thanks in advance,
  Christian
  http://www.artofbi.com

  Nevermind that, I found what I need here, http://download.oracle.com/docs/cd/E21764_01/bi.1111/e10541/prescatadmin.htm#CACEFJCJ

  with regard to the ability to search in full text of OBIEE 11 g.

• Data for the Web service control

  Hello

  I have jdeveloepr User 12.1.3, I WSDL soap, I create the data control for the web service from the WSDL, the problem is when creating data controls the separate parameter that the method, for example, below it is the method that I call the setNotificationAction name and the parameter IN (P_ACTION, P_NOT_ID, P_PASSWORD_ERP, P_TOKEN (, P_USER_ID P_USER_ID_ERP), as below, why the separate parameter that the method?

  Note that I try the binding WSDL SOAP UI and its ok and works as expected.

  

  Resolved by changing the typesList.add (Object.class) at typesList.add (GenericType.class)

• Data control for the Web Service based filter table adf only appear not

  I have a SOAP web service I'm consumption as a web service data control.

  When I use one of the results of the web service through data to the web service in the form of a table control in the user interface with the filter and sort, I don't see the filters on the top of the table.

  It comes to JDeveloper version 11.1.1.7.

  Please let me know if anyone has an idea on this issue.

  TIA

  ABS

  You need connect your own logic on the filtering table.

  The table doesn't actually do the filter - it does, is the data control to filter the info - for a Web service we do not know how it will actually make a sort-, so you'll need to add a filterListener on the table and call a WS that will be returned the filtered data method.

• Error in creation of Control (SOAP) data to the Web Service in the ADF Mobile app

  Hi, I tried to create a Control (SOAP) Web Service data in a Mobile application of ADF in JDeveloper 11.1.2.4.0 under Mac OS X 10.8.5

  The application has been newly created (no features) and I tried to create a Web Service data control directly.

  In the 'Create Web Service data-> step 1 control', when I entered the URL of the WSDL and left the text box, the window "WSDL Document for reading" came and I got an error message saying "invalid WSDL URL.

  The error description is given below:

  Houston-29114 ADFContext is not configured to process this exception messages. Use the code of exception stack trace and error to investigate the root cause of this exception. Root cause error code is DCA-29000. Are parameters of error message ({0 = oracle.webservices.mdds.MddsException, 1 = java.io.InterruptedIOException: connection timed out})

  I have JDeveloper put 11.1.2.4.0 in place on a Windows 8 and follow the same steps with the same WSDL URL and he accepted the URL.

  Can anyone help on how to fix this problem as I want to develop on Mac.

  Hello

  We have solved the problem by asking the dev team to provide the file for the web service's .wsdl. We copied the file in the file system on the mac and then instead of provide the URL, inviting us to the wsdl file. Who does the work on the mac.

  We were able to put a URL as http://wsf.cdyne.com/WeatherWS/Weather.asmx?WSDL (a non-secure web service) and the wizard to create the Web Service data control accepted the URL on the mac. Can be to secure web services, we have the .wsdl himself file. (the web service that we were trying to access was on EBS and was a secure web service)

• Getting chain of fault in the Web Service response

  Hello
  
  I developed a Web Service and deployed to the Glassfish server. When I try to call the web service a few times I am getting following error
  

  <faultstring>String index out of range: 0</faultstring>

  What is the meaning of this? How to solve this problem?
  
  
  
  Kind regards
  Ajay Sharma

  Each cal with values that do not cause a chain index to be out of range or change the webservice to hear the case which causes this differently. Anyway the point of departure is to discover where in webservice String index is out of range.

• How can I create a query with the data control to the web service?

  I need to create a query with the order of web service data, WSDL, it is query operation, there is a message of parameter with possible query criteria and a return message contains the results. I googled but can't find anything on the query with the web service. I can't find a criterion "named" to the data control of web service as normal data control. Blog of Shay, I saw the topics on the update with the data of web service command. How can I create a query with the data control to the web service? Thank you.

  Hello

  This might help

  * 054.     Search form using control data WS ADF and complex of entry types *.

  http://www.Oracle.com/technetwork/developer-tools/ADF/learnmore/index-101235.html

• Cannot find the data control to the Web Service in the Menu

  Hello
  
  I try to call a web service in the ADF. To do this, I want to create a web service data command
  
  If I understand correctly, if I right click on the template project, I see the data control from the Web Service under layer Business > Web Services. (as indicated in 2.1 Sec-http://www.oracle.com/technology/products/jdev/howtos/1013/wsadf/adfcomplexwstypes.html#WsProxyPojoControl)
  
  However, I am not able to find this entry in there.
  
  I tried the following things:
  
  I tried with Jdev 10.1.3.5, 10.1.3.4 and 10.1.3.1
  I tried to select all available models of technology to create applications
  -Any model
  -Web Application [JSF, EJB, Toplink]
  -Web Application [JSF, ADF]
  -Web Application [JSF, EJB
  -Web Application [JSF, Struts, ADF]... .and everthing else...
  
  I still don't see the web service proxy.
  
  Then I opened the ADFToystore sample application, and I could see the service data Web controls here!... .that mean my jdev is not defective... something else is missing.
  
  So, I tried to see what libraries are selected... I saw that a library named 'Web Service Data Control' are there in the project, which is not there in the model applications project that I created. So I added this library to the project, but it still does not work...
  Next, I added all THE libraries I have seen in the libraries in the project properties section... still no luck
  
  I don't know I'm missing something basic. Can someone please help.
  
  Rgds,
  Amit

  Hi Amit,

  try to set the filter above in New Gallery to filter by: all Technologies

  Kind regards

  Branislav

• Dynamic LOV with data to the Web Service Control

  Hi all

  I am currently working on JDeveloper 11.1.1.9.

  I want to implement a form of creation, for two of my form fields do correspond to LOV.

  The first is a LOV returned by a method of the web service (see back picture1) call, it works perfectly (see picture0).

  
  

  picture0:
  

  
  

  The other is represented by the nested list of the object returned by this method ( see picture1to taskPurposeList).

  
  

  Picture1:
  

  

  
  

  
  

  By choosing a value in first af:selectOneChoice , I want to access the nested list in the second af:selectOneChoice.

  I have tried to map the second field directly to this list, but it is not updated (see image2).

  
  

  
  

  

  
  

  You have an idea on how to apply it?

  
  

  Thank you very much

  
  

  Leslie
  

  Hi all, sorry for taking the trouble,.

  I finally found the solution after several days of reflection and try.

  It is, when you select a value in the select list is not to update the current row of the iterator.

  Only, I've defined the current line of my iterator (mapped to the first list) parent according to the selected code in the list and update the second list like this:

  DCIteratorBinding taskTypeLOVIterator = ADFManagedBeanUtil.findIterator ("TaskTypeLOVIterator");

  Rank [] allRows = taskTypeLOVIterator.getAllRowsInRange ();

  for (line: allRows) {}

  {if ((Row.GetAttribute("ID").) {(Equals (valueChangeEvent.getNewValue ()))}

  taskTypeLOVIterator.getRowSetIterator () .setCurrentRow (row);

  }

  }

  AdfFacesContext.getCurrentInstance () .addPartialTarget (soc2);

  Setting the current row of the iterator parent automatically updated the second list.

  Thank you

  Leslie

• How can I fnd my claim code and the reprint of the web services information sheet

  Hi, I have a HP Deskjet 3520 and try to put in place the eprint.  I read the suggestions on the forum and the FAQ but I can't locate the web services information sheet I need to reprint for claim code.

  Could not find anything under Printer Control Panel either. Please advise!

  Thank you!!

  Hi Chris88,

  Welcome to the HP Support forums.  I appreciate that you try to configure the ePrint on your Deskjet 3520 printer feature.

  If you have the inkjet printer Deskjet 3520 with a C8994 product number this printer does not have the ePrint service.  The Deskjet 3520 printer only has USB connection and ePrint to function the printer must have an independent internet connection through a wireless or a wired ethernet network.  I've included the specifications of the printer for your reference.

  If you have the e-all-in-one printer Deskjet 3520 then we obtain the claim code.  You can request the information sheet of web services from the front panel of the printer, and there the claim code printed in blue. Instructions on how to get it can be found in the section titled "to print a document using ePrint' in your on page 15 user's guide.  Please follow the instructions in step 1.

  HP Deskjet 3520 inkjet printer specifications

  User's Guide e-All-in-One Series HP Deskjet 3520

• deploy the web service to xp embedded

  Hi all

  I struggle to run a web service on an xp embedded system. The web service works very well in my LV 2011 development environment and I have created an installer for my main application it is the lvws file is included as described in web services FAQ:

  http://zone.NI.com/DevZone/CDA/tut/p/ID/7747#toc12

  After the installation on the target computer, I can't access the web service. Also if you call localhost:3580, then I get an access error.

  But in the System Control Panel administrative tools, I can see that the server system OR like many Web server OR Web applications are started.

  For further investigation, I added the 'Distributed System Manager' to my Installer. With this tool, I see that all my web services deployed on my development system, but on the XP embedded system with TEN target is listed.

  I installed my application for a professional reference XP system to exclude that the problem is caused by embedded XP. But the behavior is exactly the same. So far, I tested only local so that settings security like firewalls and ports system should pose no problems. But to be sure I have disabled the firewall without success... I can't access the Web service. I have often found the suggestions in the forum to check if the web service is enabled. But I am not already and then access to http://localhost:3580.

  Any ideas?

  Thank you!

  This help document is somewhat outdated.

  You see 2 different problems: 1) you can not display the Configuration utility and do not install Web using localhost:3580 2) your web service monitoring.

  For the first number-->

  You probably did not understand the "Interface Web NI 2011 infrastructure" in your Setup program.  The doc to help you mentioned does not tell you to do, because it is not necessary for your web service works. However, if you want to change one of the settings of your web server after the installation, you will need this extra setup program.

  For the second question-->

  You probably didn't get your Spec to build Web services as a source file in your Setup program.  The help doc says to put your LVWS file as your installation source, but this is not correct. You must include the technical article to build real web service as a source file (not the web service create out of spec files, like LVWS).

  Let me know if any of these will help you.

  -Jared

• OfficeJet 6500 a Plus: impossible to activate the Web services; roadblocks at all stages

  This printer is connected to my network by Ethernet. I want to activate Web services, so I can use ePrint.

  When I try to enable Web services from the printer control panel, I said that I might need to enter a proxy address. I'm not running a proxy server, but it is not possible around this prompt.

  There are posts on this Board indicating that Web services can be activated with a Wi - Fi connection. I unplugged the Ethernet cable and wireless enabled, but I was always invited address proxy information when I tried to activate the Web services. I disabled wireless and returned to Ethernet.

  A response to another post suggested updating the firmware to bypass the proxy server error. HP recommendation is to do it from the control panel of the printer. In the Panel menu control, firmware upgrade is the title of the Web services, which I can't because of the mistake of the proxy. So I downloaded the firmware and tried to install the update from my computer. The update found my printer on the network, but it is gray, saying 'Not applicable', under the State. I couldn't select it.

  In another post, someone suggested THAT DNS has been configured. I saw, through Server Web shipped by the printer, there is no configured DNS server (the printer is configured for manual IPv4). So via the integrated Web server, I tried to enter addresses (my domain controller, OpenDNS, Google) DNS server. With each of them, the SAP replied: "an error has occurred. (ipv4Page-400). Click 'OK' to go back. "There is no place to enter the DNS settings on the printer control panel.

  Web services require a Wi - Fi connection?

  Why the printer think there need a proxy address?

  The firmware update will solve the proxy error?

  I have to update the firmware, if the update statement indicates does not apply?

  What is another method for updating the firmware out of the control panel or from my computer?

  How to enter the DNS of the EWS information without getting an error?

  Jeffrey Pike

  Groton public library

  Charles:

  Thank you for taking the time to provide a complete response to my questions.

  I finally got the Web services enabled on the printer. What I had to do was enter the DNS settings in SAP to bypass the prompt for proxy information. Step I missed yesterday, when I got page not found error in the SAP, was that I had to do the secure version of the SAP ("https", not "http"), and then the EWS would accept my DNS entries. Once this is done, I went to the printer and could enable Web services without having to provide proxy information.

  The printer is now registered to hpconnect.com, and I can start letting my library to print patterns on my wireless network, that was my goal all along.

  Thanks again for your help.

  Jeffrey Pike

  Groton public library