The whole Resart

I want to remove my computer make it back as when I got it. How can I do this?

Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

There is no Vista free download legal available.

Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

Normally, they do this for a cost of $ small.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

Normally, you have to press F10 or F11 at startup to start the recovery process...

Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

They will tell you how to do this.

Every computer manufacturer has their own way of making recovery disk/s.

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
A good Vista DVD contains all versions of Vista.
The product key determines which version of Vista is installed.

There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

http://support.Microsoft.com/default.aspx/KB/918884

MS advice on the conduct of clean install.

http://www.theeldergeekvista.com/vista_clean_installation.htm

A tutorial on the use of a clean install

http://www.winsupersite.com/showcase/winvista_install_03.asp

Super Guide Windows Vista Installation

After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

Save all data, because it will be lost during a clean installation.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • How can I close a tab that has locked up, rather than farm the whole browser to be insensitive?

    I have a bad habit of having several tabs open. If I click on a link that translates the whole browser becomes unresponsive, how do I close the tab offending rather than having to close the entire browser and losing all my tabs?

    It is not a bad habit, it's normal.

    Unfortunately, there is currently no way to 'kill' a single tab without picking up Firefox.

    A few times a week I get "not responding" when I exceed the amount of memory Firefox can use. Usually about 60-90 seconds, I can close Firefox by using the menu, either:

    • "3-bar" menu button > button "power".
    • (menu bar) File > Exit
    • These same keys in order:Alt f x

    Freezes caused by other reasons could not out, in which case you get stuck. Prevention is the best cure.

    This support article covers some common reasons for freezes: Firefox crashes or does not - how to fix.

    Since the Flash plugin can also cause this problem and it is used everywhere around the web, I suggest the following to minimize potential problems with Flash in your troubleshooting:

    (1) to avoid unnecessary pain on the sites where the Flash is not really essential, try to set the Flash on Click-to-Play (Ask 'activation'). This will delay the Flash start on a page, until you approve.

    To set 'Ask to activate', open the page modules using either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. Search 'Shockwave Flash' and always change 'enable' to 'ask to activate '.

    With this setting, when you visit a site that wants to use the Flash, you should see a notification icon in the address bar and usually (but not always) one of the following values: a link in a gray rectangle dark in the page or an information bar sliding between the toolbar and in the page area.

    The plugin notification in the address bar icon usually resembles a little Lego block, dark gray. (If it is red, Flash must update.)

    The delay in the activation of Flash can help distinguish between the problems caused on the initial page load, put in folds and script activation vs Flash/loading bar.

    If you see a good reason to use Flash, and the site looks trustworthy, you can go ahead and click on the notification icon in the address bar to allow Flash. You can trust the site for the time being or permanently.

    But some pages use Flash only for tracking or play ads, so if you do not see an immediate need for Flash, feel free to ignore the notification! He will just stand here in case you want to use it later.

    (2) a common cause of errors in script does not work in Windows Vista and later is the feature of mode of the Flash player plugin. This feature has the security benefits, but it seems to have serious compatibility problems on some systems. You can disable it using the page modules. Either:

    • CTRL + SHIFT + a
    • "3-bar" menu button (or tools) > Add-ons

    In the left column, click on Plugins. On the right side, find 'Shockwave Flash' and click on the link for more. Then uncheck the box for "Enable Adobe Flash protected mode" and try it for a day to see if that helps you.

  • The update has not updated; I downloaded the whole rather as instructed, and it won't work. Now what?

    I'm looking for advice: I wanted to update firefox - updates (he describes himself as 'security') has failed. I looked on this website for advice. He said to download the whole version. I did it and the file will not work. I can't update the browser or load a new version.
    That raises red flags in my brain (rightly or wrongly). I know all sorts of things I could try, but having had security problems recently, I would appreciate guidance / wisdom on the matter. I maybe paranoid, but it seems that something is wrong.
    The old version of my browser works ok for now.
    Help, please.

    Try this:

    If you keep problems, disable your anti-virus temporarily.

  • How to print only the text selected on a Web page and not the whole page?

    After you have selected a segment of a web page for printing, I go to the icon for printing and that clears the selection, leaving only the whole page as the selection to print.

    "The feature to print just selected text in a Web page doesn't seem to be a function of Firefox."

    If you use the toolbar print button, from the preview window before printing 29 Firefox open rather than the "Printing dialog window" as with the previous versions. using the button print in the upper left corner of the preview, takes you to the "print dialog window. "selected text" does not persist through the preview window; no way to print a selection of text using the toolbar print button. (a bug report has been filed on this change - regression.)

    As cor - el mentioned if you start printing via the keyboard, instead of using the button print, you should be able to print a "selection" of the text.
    WFM - works for me

  • In a sequence of CTF, is it possible to obtain a text file of sequence clips display? There is a display of text file for clips (cmd-9). Zoom the timeline cancels the ability to see the whole sequence of the time line.

    In a sequence of CTF, is it possible to obtain a text file of clips in sequences display (name and duration)? There is a display of text file for clips (cmd-9). Zoom the timeline makes this visible annotation for shorts, cancels but the ability to see the whole sequence of the time line. Of course, it would help my editing.

    TIA

    In Final Cut Pro 7, you can use editing > find command to search on used clips in the sequence. See if there is an equivalent command in FCE. Unfortunately, I can't determine that at first hand on my system. (In addition, if you are still interested whereas FCP X, there the so-called Timeline index which provides quick access to a list of markers, clips, effects, etc..)

    Good luck.

    Russ

  • My laptop crashed on the ground - can I order the whole cage?

    * My laptop crashed on the ground... *.
    .. and the whole cage is broken - the lcd semms to be ok.
    I can start the notbook...

    _My question: _ I can order the entire cage somwhere (chassis, chassis, top (that the content of the LCD))

    concerning
    Neo

    I m pretty sure Googling around you will find place on order broken parts. I don t know where you live but you can also communicate with the Toshiba service provider in your country.

    In my opinion best and the best for you is to buy laptop faulty on eBay (motherboard failure) and exchanging broken parts.

  • could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

    could you change the behavior of ff in full screen? I hate it when I move the whole page view tab bar. tab bar should slide on the page without moving

    You can watch the extension auto hide:

    AutoHide: http://www.krickelkrackel.de/autohide/

  • Online banking, sign in - cannot see the whole box with random code form

    I tried several times to log on my site of banking in line, but even if I use the format of mobile banking and I'm in landscape mode, I can't visualze the whole box that contains the random code and therefore it cannot open a session. I can do on my husbands HTC evo so is this a limitation of the size of the display screen / Motorola xprt? If so, this is not good.

    Something similar, even on this site on the phone - the fields username and password are correct, but there are some blocking/overlap for the button.so based on this newspaper is delicate. Don't know what other sites may have similar problems.

    Thank you all, I discovered this itiwas because I had font size value ' bigger, once I put it back to the 'normal' the box set is on the screen. " I use the default browser but I'll watch the dolphin, we suggest as well. Looks like it's a good phone - just a lot to learn and adjust.

  • The recovery DVDs Vista formats the whole HARD drive

    Hello

    I have a Toshibe laptop with 2 hard drives.

    My Question is:
    When I use the recovery, is that they are all deletet hard drive or only the Windows Partition?

    Yes, the Toshiba Recovery disk format the whole HARD drive; also all created partitions.
    Simply said; the recovery disk redefine the laptop on the first day of the purchase.

    Welcome them

  • Is it possible to delete an account off Xbox 360 without deleting the whole account?

    Original title: those of Xbox and Xbox 360

    Is it possible to delete an account off Xbox 360 without deleting the whole account? I want to just that this account off certain Xbox

    Hello

    Your Question is beyond the scope of this community...

    I suggest that repost you in the Xbox Forums.

    "Xbox a Preview program FAQ.

    http://support.Xbox.com/en-us/Xbox-one/system/Xbox-update-preview-FAQ

    'Home'

    http://forums.Xbox.com/

    "Xbox forums.

    http://forums.Xbox.com/xbox_forums/general_discussion/f/3817.aspx

    _________________________________________________

    "Xbox Forums directory.

    http://www.Xbox.com/en-us/forums

    General

    Material & Discussion Services

    Xbox support
    Agent hours: M - F 09:00-17:00 PT

    Law enforcement forums

    Technical support of Xbox Live rewards
    Xbox Live rewards Squad hours: M - F 09:00-17: 00 PST

    See you soon.

  • Component button Power on the motherboard has broken and I was wondering if I had to replace the whole motherboard or just that one piece

    Aspire v5-122p-0408. The component on the motherboard power button broke and I was wondering if I had to replace the whole motherboard or just that one piece

    Hello

    For more information about this, please contact Acer Support, ask in the Support Forums or ask your local Computer Repair Tech.

    http://community.Acer.com/T5/discussion-forums/CT-p/boards

    See you soon.

  • can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

    can someone give me links to download only setup.exe and autorun.exe to the tribes of heroes 5 of the game is that mine are corrupted and I can't download the whole game again?

    This is the incorrect forum for your question.

    Try using Bing or Google, like this

    http://www.bing.com/search?q=Heroes+5+tribes+of+the+East&form=OSDSRC

  • I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture. How can I fix it?

    I have a laptop Dell Duo and every time I put a new image as my backround it zoomed upward and I can't see the whole picture.

    How can I fix it? Someone please help

    Hello

    What operating system do you use?

    If you are using windows 7, I suggest you to follow the link and set the picture on the screen of the link fill and check.

    Make changes to your desktop wallpaper slideshow

    http://Windows.Microsoft.com/en-us/Windows7/make-changes-to-your-desktop-background-slide-show

  • The whole sparse matrix line efficiency

    I'm new to the MASM Toolkit (Multicore and hollow matrices).  I am impressed by the speed of the solution compared to my old code that used a dense matrix Solver.  For example, a matrix which took 93 sec to solve in a dense form took only 72 msec to solve the sparse form.

    However, I now have a significant increase in the time required to build the matrix.  To build the dense matrix took only 180 msec, but to build off-peak matrices takes 9.7 seconds.  Of course, I am happy to share the sec 9.7 to build off-peak matrices for the sec 93 solve the dense matrix.  But I wonder if I use more efficiently the sparse screws.  The profile tool shows that the "overall (DBL) .vi sparse matrix line" requires on the part of the lion of the time for my program to run.

    I've attached a screenshot of the part of my code where I am building the matrix. Can we see a quicker way to build off-peak matrices?

    Have no of MASM, it defines the function of the element - instead of the whole line?

    Only 4 items per line, others are zeros if I'm not mistaken.

  • I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003.

    I have Windows XP Professional Version 2002 Service Pack 2 and have spent the whole day (from 09:00 to 21:25) trying to upgrade to XP 2003. I have a Microsoft Office 2003 CD and when I try to download I get a message saying "necessary install file YS561401." CAB is not found! " I've been going around in circles ALL day! Can someone please help me!  When I try to put automatic updates for my computer, I get this message: "the site has encountered a problem and cannot display the page you are trying to view. The options provided below might help you solve the problem"- none of these options helped me at all! I even tried to download "Silverlight" (as recommended) and get a message ID: 1511 - "install missing Windows, downloading Windows update components! ARRRGH!  During the day, I also received error 0 x 80244019 and error 0 x 80240036. What is going on???

    Hi Kenny_47,

    There is no XP, 2003; If you want to upgrade your XP SP2 to SP3, download it here:-http://www.microsoft.com/en-us/download/details.aspx?id=24
    I suggest to install the following updates before installing XP SP3:
    1. Windows Installer for XP from:-http://www.microsoft.com/en-us/download/details.aspx?id=8483
    2. Download and install the Windows Update Agent: http://support.microsoft.com/kb/943144/en
    You are using an original CD of Office 2003?

Maybe you are looking for

  • Portege R700 - high CPU fan noise

    Hello I own the Canadian version of the Portege R700, called Tecra R700 (PT319C-00E002).The CPU fan always runs between 43 percent and 51 percent (regardless of the mode of selected frequency), which makes the noisy computer - too noisy to be used co

  • Sony SMP-N200 browser Flash support

    I just got my new SMP-N200 and experimenting with the browser, I noticed that it does not support Flash. Are there plans to release updates to enable this support? A browser without this feature is not very useful. Thank you

  • Superdrive Apple USB drive problem

    Situation: The internal superdrive on my MacBook 2009 stop working while I bought a new USB Superdrive.  And only after I plugged it in, has indicated that it is incompatible with my computer.  After reviewing the advice here, I said that most of the

  • No Option of account Type change under user ID-want to change of Admin for the Standard user

    Hi, we have a Vista Home Premium system.  One of the children has received this PC and they are as an administrator with no other users.  Later, I added myself as admin and wanted to change the children as a standard user account type, but there is n

  • How can I move an email in my mailbox of translator?

    Move email to Bing translator, step by step instructions.