The Wifi connection in Windows 7

Similar Questions

• FP 6700: Hp 6700 loses the wifi connection

  Guard 10 Windows printer Hp 6700 lose the wifi connection that requires powering off the coast of the printer running and the cable/modem.  I tried the suggestion given in the forum, but does not solve the problem. The printer is located in 2 feet of cable/modem D5001 model pace and I have the latest software and firmware installed.

  Anyone have any ideas on how to solve this problem.

  Thank you.

  Move the 6700 further pace or connect an ethernet cable to the rhythm of the 6700.

• I've never seen the cloud on my watch symbolizing the wifi connection.

  I've never seen the cloud on my watch symbolizing the wifi connection. How to operate when phone and shows are on the same network?

  Hi, Kristian

  If your Apple Watch is not connected to your iPhone via Bluetooth, but it is within range of a WiFi (2.4 GHz) network your iPhone plugged in the front (while it was connected to your watch via Bluetooth), then your watch can connect to this network and still offer some features:

  • How to use your Apple Watch without your iPhone in the vicinity - Apple Support

  To check the status of the connection of your watch, go to the eye of parameters:

  • When displaying the time on your watch, slide up on the screen, then swipe left / right for the look of parameters.
  • This will specify connected or disconnected:
    • If it says connected and the icon in the upper right corner is a green phone, your watch is connected to your iPhone via Bluetooth.
    • If it says connected, the icon is a green cloud, then your watch is disconnected from your iPhone via Bluetooth, but rather connected (as a backup) to a known Wi - Fi network.
    • If it is disconnected, your watch is disconnected from your iPhone and also is not connected to a Wi - Fi network. The icon in the upper right corner will be a red telephone with a line through it.
  • Slide down again to return to the watch face.

  To test whether your watch is currently able to connect to a Wi - Fi compatible network known as a relief:

  • When within range of the network, turn off Bluetooth on your iPhone.
  • After pausing for a short time, check the status of the connection of your watch as described above.

  More information:

  On Bluetooth and Wi - Fi on Apple Watch - Apple Support

• All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  All of a sudden my MacBook loses the wifi connection when he woke from sleep mode. Does anyone else have this problem?

  Tell us what event preceded "all of a sudden" - something to do with the software or hardware environment

• Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  Why my ipad loses the wifi connection when I abandon my modem wireless of Qwest

  WiFi connections are losing their strength increases the distance between the router and so as a general rule, there are some conflicting objects

  Try the following steps please

  The following actions and after each test to see if the issue is resolved - if yes, then you can omit the following steps - I tried to list them in ascending order of the effort at least on a Mac and / or an iDevice

  1. Check if the problem is related to a single device and if other devices connect normally-
  2. If the answer 1 is 'yes' - try to connect the device assigned to somewhere else if possible - coffee or the University
  3. Perform a forced - restart cela do not delete or purge all data and allows to solve many problems - here is how - press and hold the Off / On Home button and at the same time for about 15-20 seconds, until the Apple logo appears. Allow normal startup upward.
  4. Settings - WiFi - < network name > - Click on forget network - do a restart forced according to 3 and then add again the network
  5. If home - reboot the router by unplugging it for 60 seconds (power) and the plug and reconnect - obviously, this step can be done in a public place like a cafe or airport or University. While you're there - make sure your router is working on the latest firmware (check manufacturer's website)
  6. Settings - general - reset - Reset network settings - remember to have very practical WiFi passwords because it erases the WiFi passwords
  7. If it is a new specific net device in your home - make sure that the router gives enough DNS for all numbers which must / wants a connection - stuff like the printer, Chromecast get overlooked - ask for more details on this so not sure option
  8. Backup the device to iTunes - restore as NEW (no) - see if solves problem - if yes - restore backup
  9. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• What will I do if the wifi connection is interrupted during the update the new os 9.1

  I already download the new ios 9, but unfortunately the wifi connection and the update of the icloud setting was not able to go forward, what I'll do then its keep on update

  Try to hang the iPad to a computer and see if you can continue installation using iTunes.

• Interruption of the WiFi connection.  Green light is the Airport Express. Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.

  Interruption of the WiFi connection.  Green light is the Airport Express.  Settings Network said the cable for the Wi - Fi connection is not connected or the device at the other end does not respond.  Tried to reset Airport Express, but remained light amber or orange flashing.  I unplugged it and waited and plugged back into the light turned green.  Rebooted computer (Mac Pro). Parameters of said the same thing.  Managed to create a WiFi "network with the ethernet in the network settings section, and yet I am wireless.  I am online but not wired and WiFi settings still says not connected, and either the cable for the Wi - Fi is not plugged or the device at the other end does not respond. I don't understand this situation.  My original WiFi name disappeared.  How I am on the internet?

  What is the brand and model of the modem Internet you have the AirPort Express directly connected by Ethernet? What exact model number is your Express?

• ConnectionFactory cannot create the WiFi connection

  I tried this code example, and it returns null ConnectionDescriptor when I only have the wifi connection:

  cf = new ConnectionFactory();
  cf.setPreferredTransportTypes(new int[]{
      TransportInfo.TRANSPORT_TCP_WIFI,
      TransportInfo.TRANSPORT_TCP_CELLULAR,
      TransportInfo.TRANSPORT_WAP,
      TransportInfo.TRANSPORT_WAP2,
      TransportInfo.TRANSPORT_MDS,
      TransportInfo.TRANSPORT_BIS_B
  });
  cf.setAttemptsLimit(2);
  cf.setConnectionTimeout(10000);
  ConnectionDescriptor descr = cf.getConnection("http://www.google.com");
  StringBuffer buff = new StringBuffer();
  if(descr == null){
      buff.append("no descriptor");
  }else{
      buff.append(descr.getTransportDescriptor().getTransportType() + ";" + descr.getUrl());
      try {
      descr.getConnection().close();
      } catch (Exception e) {
          System.out.println("===>conn close error:" + e.getMessage() + ";" + e.getClass().getName());
      }
  }
  

  I tested with the mobile network and it works well and returns the connection descriptor non-zero but when I try with the wifi only and always returns null.

  I tried to access Google.com on the bb browser and it opens.

  However, the connection is slow and it loads for a while before opening google. Is this the reason why I get null handle or its something else?

  Well I solved it.

  It turned out that I had activated the VPN profile to the wifi network. When I disable the code works ok.

  But this raises the question why can't make a connection http via wifi with active VPN profile. I can always open google.com in the browser.

  I'll make a new thread for this question.

• BlackBerry Smartphones BB Curve 9300 - how to prioritize between the Wifi connection and the carrier?

  Hi all, I have a question... How do we place on our BB unit to plug into a wireless network from first (if available) to browse and not them connected to the internet all the stuff instead of using our carrier, then at home or at work?

  There are no parameters for this on most devices, the WiFi connection will ALWAYS be priority for communication of data via the connection to the mobile network.

  Some rare machines with capacities AMU have an Option to set this priority. UMA is a service of only a few mobile providers like Tmobile.

• How to activate the Internet connection on Windows Server 2003 is installed in the virtual machine in VMware Workstation 8?

  I have Windows Server 2003 is installed on a virtual machine in VMware Workstation 8. I need it to learn and practice the use of the Active Directory. I've also set up 3 Windows XP workstations connect to it, which means that they can communicate with Server 2003. What is lacking is the Internet connection on all of them. When I run ping 8.8.8.8 in one of these virtual machines, I get, 'Destination host unreachable.'

  I'm not sure, what if the problem comes from the settings in Windows or the settings of the virtual machine.

  Can someone help me?

  Thank you, guys. I was finally able to put in place. It was quite an ordeal to deal with IP addresses and virtual networks. Here's how I did (in the screenshots) in case someone else needs it.

  (I also confess that it is perhaps one of the ways to implement. Maybe there is an easier way to do it with DHCP...)

  1. in your computer where is installed VMware Workstation 8 begin the "Virtual Network Editor." It is located in the folder of installation of VMware Workstation. And implement the network following (VMnet2 in my case):

  

  2 then in VMware Workstation itself in the virtual machine when Windows Server 2003 is installed set up two network as connections:

  This one is for external access to the Internet:

  

  And this one for intranet communications AD:

  

  3. then in the machine virtual de Windows Server 2003 set up what follows for two network adapters:

  For Internet access:

  

  Then, you need allow this connection to share:

  

  And then for the ad access to workstations (ensure that the static IP address is in the range specified in the virtual network over VMnet2 network editor). I've also set up DNS to 127.0.0.1 because I installed on this Windows 2003 DNS server:

  

  4. from the Windows 2003 VM try ping 8.8.8.8. It should work now.

  5. go to each workstation, in my case, Windows XP, each in its own virtual machine and set up the network in the VMware Workstation as follows:

  

  6. then in the virtual machine, configure the network connection for Windows XP workstation. Don't forget to assign a new static IP address for each workstation, which not coinside with IP of the domain (this IP address must come from the range specified in the virtual network over VMnet2 network editor):

  

  7. try first ping the domain, in my case ping 192.168.237.128. And then Internet, ping 8.8.8.8. The two should work!

  Continue with steps [5-7].

• How to solve error 1075 the dependency service does not exist or has been marked as deleted by sharing my internet conection as temporary ad - hoc wifi connection? Windows 7

  For 6 months I have been successfully using my based ad hoc temporary internet connection wifi connection to aid Assistant ICS (internet connection sharing) on my computer laptop windows7, but last night my microsoft security essential antivrus detected and removed Trojan win64 sirefef. "" B and after that, I have this error 1075 "the dependency service does not exist or has been marked as deleted" whenever I tried to make the new ad - hoc wifi based connection to share my main internet connection for my other devices

  I was looking for a response, and since I met the same sirefef of virus variants. (x), after the removal of virus, that I remembered the place, that he has done.

  C:\WINDOWS\Microsoft.NET\assembly\GAC_MSIL

  As a solution, I think that if a system component is damaged I shuould fix first.

  In fact, I did a full upgrade to Windows 7 (build even) with the OS DVD.

  I must mention about the extraordinary capabilities of Windows 7 on the upgrade.

  After all the upgrade process which took about 2 hours to "Installation of Windows 7" discovered that .NET framework 4.0 is damaged and repaired. And I could start ICS.

  Without all this hassle if you could try to reinstall .net Framework 4.0, I think that this problem will disappear.

• question about the WiFi connection

  OVERV wifi in the notification area Android says I'm not connected even though I am able to send chat messages as they are received. Not the case with voice calls.

  When I try to call someone on the phone or mobile number, that the call recipient responses I am able to hear from him/her, but they can't hear me back.

  In terms of data, everything works fine. Please fix this.

  Resolved when I disconnected the application Skype in Windows 8

• Problem with WiFi connectivity in windows 8.1

  Hello

  I have problems with my Wifi on my HP Pavilion 15 Notebook (product number: G2H02PA-#ACJ)
  I have Windows 8.1 as well as Ralink RT3290 802.11bgn Wi - Fi adapter.
  
  My Wifi connection says LIMITED connectivity. I've already complained about my problem on the HP support by phone. But I don't have any solution for my problem. Technician a driver wifi re-installed and the Bios but did not get any solution. Customer support sent me some links to update the driver but not got any solution again.
  I tried to install different versions of drivers for card Ralink WLAN ! Still without success!
  I am writing this post from my other laptop that my wifi router running on other devices!
  
  Pending a solution so that I can use internet on my new laptop computer.
  
  Thanks in advance for any solution.

  I also had this problem and corrected.

  To correct the problem of wifi... open charms bar... in the search window, type device manager in Device Manager... double click network adapters, right-click right on... Qualcom Atheros QCA 9565802.11b/g/n wifi adapter... right click and click on uninstall.

  A pop window should open asking you to confirm. Confirm by clicking on... Ok.

  After that, restart your laptop.

  Your wifi should be visible in the networks. You can then connect to your network of your choice.

• Satellite M50 161 - how to set up the WIFI connection?

  I use my Satellite as a second computer. My PC is primary and is using a NETGEAR card.

  I used a card reminder in wireless cards because my home office is a bit far from the PC.

  Of course, my laptop has its own part of the ways to get online.

  I've always taken for granted connection. I don't even remember the 1st time I am connected. In fact an engineer could have done to the delivery!

  PC had problems connecting. Host Web server problems. I was expecting sort of my laptop to connect in any case, as it could / should connect to it's own wireless installation to get online. I'm not an expert as you realize.

  It dawned on me while I had no idea how to switch on and connect using the built-in wireless card that not Netgear obviously. Or I'm expecting a lot and the lap top is actually a slave to my PC connection and always will home in on the netgear connection.

  BTW, I'm back online via the netgear but would like to know. Excuse my ignorance...

  Hello

  To be honest I m a bit confused.
  I put t know exactly what you want to do.

  You want to connect the laptop to the other PC via WiFi or connect the Satellite M50 to the WLan router as usual?

  If you want to connect to the Wlan router and then activate the wireless card on the laptop with the WLan switch on the side of the laptop and the FN + F9 key combination.
  Then configure settings such as the SSID, encryption, Mac address, etc. by using windows has the configuration settings or 3rd party software like utility Intel ProSet or Atheros client utility (depending on the Wlan card).

  For more details you can visit the Toshiba Wlan Portal
  http://APS2.toshiba-tro.de/WLAN/

  concerning

• HP Pavilion 14e016tx - cannot detect the WiFi connection

  My HP Pavilion 14e016tx (win 7, 64-bit, rt3290 ralink 802.11) does not detect WiFi connections. Sometimes it does not detect, but when I try to connect, it still shows the failure message ("windows could not connect to xxxxx & quot.") No idea how to solve this problem? Update the driver or solutions?
  
  Any kind of suggestions are appreciated! Thank you.

  Hello:

  I don't know which driver you used, but you can get the latest being for this map directly from Mediatek (Ralink) below:

  PCIe (RT2790 / RT309X / RT35X2 / RT539X / RT3290 / MT7630)

  15/04/2014

  V5.0.46.0

  Win7 32/64 Win8 32/64 Win8.1 32/64