The window Vista, SP2 'Impossible to check updates' error 800F080D

I tried all the suggestions on this forum, as well as what I can find online, without a solution.  I use Panda Security, however, I uninstalled it and the problem remains.   I have tried the repair on the original CD, ran Fixit and a number of other solutions.  I just reformat the drive and start over, but don't have my original CD for MS Office and cannot afford to lose.  Any suggestions would be greatly appreciated.

Windows Vista Business

SP2

As I tried to reset the software update I lost the history of updates are on this machine.  The last update 01/02/2013.  So this should give an idea where is the operating system.

I ran sfc/scannow as stated in my previous post and found a file, he could not set:

2013-03-03 11:26:35, 000001fd CSI Info [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:22{11}]"Autochk.exe '; source file in the store is also corrupted

As the job file and the source are corrupt, where can I get a version uncorrupted "autochk.exe" and how do I go about replacing it?

Under Vista SP2 Professional.

Thanks, Lester

Hi Retselyaj,

I would have you to consult these links:

Note: I suggest you back up the data before you perform the steps in the link.

You cannot select the upgrade option when you try to install Windows Vista, and you receive the following message: "upgrade has been disabled".

http://support.Microsoft.com/kb/926069

Error message when you try to install Windows Vista by using Windows Vista installation media: "upgrade has been disabled - put level, start the installation of Windows.

http://support.Microsoft.com/kb/932009

I hope this helps. Let me know if you need help with this problem.

Tags: Windows

Similar Questions

  • Windows vista home premium-inable install updates error code 80070005

    original title: windows vista error code 80070005 premium family

    My computer won't allow updates. Whenever I check for them I get the error code 80070005. How can I fix it? Ive tried a few fixes here and nothing works.

    Hello

    ·         What are the troubleshooting steps you have tried?

    ·         You get the error message with code 80070005?

    I suggest you follow these methods and see if it helps:

    Method 1:

    Try to install the update to the clean boot and check if it helps.

     

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135/en-us

     

    Note: Don't forget to start your machine in normal mode by following step 7 of the link.

     

     

    Method 2:

    You can try temporarily turning on all security software and then try the updates again.

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software


    Important note:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

     

    Method 3:

    I suggest you to reset the Windows Update components and check.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058

    Method 4:

    Follow the steps in the below article mentioned and look for the question.

     

    Problems with installing updates

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Method 5:

    Error code 80070005 means generally that you're not quite allowed to install updates. Check out these articles from the KB and check if that helps.

    http://support.Microsoft.com/kb/816731

    http://support.Microsoft.com/kb/918355

  • Updates Windows Vista taking ages to check updates

    Hello

    I have windows vista 64 bit Ultimate edition with Service Pack 2, all updates up to 15/06/2016. I'm on automatic updates. The last verified time of automatic updates of updates 12/07/2016 at 09:43.

    When I tried to manually check for updates by clicking on "Check for updates" all I get is a blue status bar goes round and round. I have no error code.  Never, he's basically saying that there are some installed updates.  If I do not receive updates from July 2016 to install.

    Please some help with this.

    Thank you.

    Thanks Volume Z.

    It worked for me. I ran windows update and downloading updates.

    For those who need the 64-bit Edition of the above file

    https://www.Microsoft.com/en-US/Download/details.aspx?ID=53242

  • I am running windows vista sp2 and I get an error message "cannot load resource dll" How can I fix the problem.

    Have noticed that my history of visited web sites is saved is more and the error message above appears whenever I start my laptop, I tried to download ie9 instead of run the ie8 I have, he (ie9) is not installed. I have also tried to use the repair and fix the items, but they don't work anymore. can anyone help? TY

    Hi John,.

    (1) how long have you encountered this problem?

    (2) what is the complete error message you receive at startup?

    (3) do you get an error message when you try to install Internet Explorer (IE)?

    (4) are what patches you referring? What happens when you try to invoke?

    Method 1:  Put the computer to boot and then check if the problem persists

    Follow step 1 in the link below,
    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

    Continue with the remaining steps to pin-point on the third party service.
    After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

    Important: n ' forget not to put the computer to a normal startup follow step 7 in the link.

    Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Method 3:

    You can see the steps by Afzal T and Azeez N in the links below to solve problem of navigation history

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-Windows_7/Internet-Explorer-will-not-save-history/c06284ac-595e-400F-831C-7aa79948de1d

    http://answers.Microsoft.com/en-us/IE/Forum/IE8-windows_other/Internet-Explorer-8-does-not-save-all-history/3533d7d4-72de-45B9-AAE9-1db7b6cba5d7

  • After installing Windows Vista SP2 will bluescreen message updated changes failed and recovery

    Original title: start windows vista to the top of the page. (URGENT)

    My windows vista computer said it would install an update for the with a window pack 2 or something and it says installation failed, and now it returns changes. The screen and the message was on my laptop for hours. After the first hour, I decided to turn off main power switch immediately because it was taking too long and when I turned it back on. It is returned to the blue screen with the message update failed and their changes in recovery. Then what should I do? I want to continue with my laptop again and he has never done this before. Please help as soon as POSSIBLE. Antonio

    Hi Antonio,.

    You can check out the following link and try the suggested steps to resolve the problem installing Vista SP
    update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358/en-us

    Also see the KB article and check:
    How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
    http://support.Microsoft.com/kb/947366

    Hope this information is useful.

  • j can't install the windows vista service Pack 1 KB936330 update

    EVERY TIME I TRY TO INSTALL ABOVE UPDATE J'M UNBABLE TO DO

    Gianni reina, what error messages if one is to receive you during the installation of the service pack?

    You use Windows Update agent to run the download and installation?
    If so go ahead and download it manually, and then boot into boot and apply the update:

    Download the stand-alone update: x 64 | x 86

    Determine if you are running 32-bit or 64-bit:

    Click Start -> click right computer -> select Properties. In the window System , under System , next to system type: it will show you, 32-bit or 64-bit operating system .

    Click Start , type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue .)

    On the general tab, click Selective startup .

    Under Selective startup , clear the Load Startup items check box.

    Click the Services tab, select the hide all Microsoft Services check box, and then click disable all .

    Click OK .

    When you are prompted, click restart .

    Log on to your account.

    ---------------------------------------------------

    Try now update again: click Start -> all programs click-> click on Windows Update , click check for updates and install one that is found.

    If you wish you can also try the update of the manual installation file, you have downloaded from the previous mentioned link.

    ---------------------------------------------------

    To restore your Normal startup:

    Click Start , type msconfig in the Search box and press ENTER. (If you are prompted for an administrator password or a confirmation, type the password, or click continue .)

    On the general tab, click Normal startup .

    When you are prompted, click restart .

    ---------------------------------------------------

    Once you have tested these steps, post your results so that we will know if they succeeded.

    Rami
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • 0xC004F055 - windows vista business service pack 2 Update error

    automatic update for service Pack 2 came and installed. but after 3 pass. He turned back. After the system starts but cannot connect to users in vista.

    Code: 0xC004F055

    I bought this dell laptop and I have the original sticker on the back of the laptop. but nothing is prompting you to enter the key.

    pls help how to solve this problem.

    THX.

    Hello

    You put the computer in the clean boot state before you install Windows Vista Service Pack 2?
    Try to download any independent language and see if that helps.
  • Dell Studio 1737 running the Windows Vista operating system. Hard drive errors

    My laptop Dell Studio 1737 running windows vista reports error code 2000-0146 since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    My laptop Dell Studio 1737 running windows vista reports 2000-0146 error code since the PSA Diagnostics. I made diagnostics from the Dell Web site, and it reported targeted read Test failure WHD20 - 4 2 and Smart short self-test 4FH WHD16. My computer seems to work very well and boots from the hard drive normally with no problems. What patches or software downloads are what can I do to solve my problems?

    Hello

    This Dell 2000-0146 error code is for a failed hard drive / failed.

    You will need to replace and reinstall the operating system.

    Save your data as soon as POSSIBLE.

    See you soon.

  • Windows could not search for new updates (error 800F080D)

    original title: Windows could not search for new updates

    Errors found: Code 800F080D.  Could be anti-virus software related as it seemed to stop working when I performed an anti-virus scan.

    HI gdm21,

    Since you have questions, even the installation of system update readiness tool. There may be a corruption of the system which causes this error and updates to fail.

    Just ensure that you have run through this repair tool: http://support.microsoft.com/kb/929833

    Do you get errors when you run this?

  • Impossible to check updates, error: the site has encountered a problem and cannot display the page you are trying to view

    Original title: cannot update Windows after reformatting laptop IBM T42 Win XP

    The website has encountered a problem and cannot display the page you are trying to view. "

    I reformatted computer IBM T42 with Service Pack 2 and now I can't update Windows when I clicck on Express or custom< iget="" the="" following:="" "the="" website="" has="" encountered="" a="" problem="" and="" cannot="" display="" the="" page="" you="" are="" trying="" to="" view.="">

    Install Service Pack 3 first:

    http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  • I have two Toshiba laptops, and both died after the installation of Windows Vista SP2

    I have two Toshiba laptops, and both died after the installation of the Windows Vista SP2 (home edition).
    Now, it does not... even not start BIOS... Try to boot from the CD, no luck. When WVista SP2 installed and restarted, after a while, he came to the flashing message: 0xC0190036 1183/62494...

    I can't help that if it does not start even. I don't have a CD WVista. Both laptop came pre-installed. In addition, no rescue CD.

    Any help will be appreciated. I really need help.
    Thank you.

    Well, try this:

    1. If the power is off.
    2. Start the laptop and keep press F8
    3. then select restore.

    And? :)

  • repeated problems with HP550 / Windows Vista SP2

    Hi all

    the following problems keep recurring and the help of windows update does not respond:

    (1) I get a reminder to register my new product - I already did.

    (2) Windows update - continues to not install updates correctly - whenever it starts

    I have tried many tips/tricks to solve installation problems - but does not

    Can anyone suggest a work around

    Thank you

    Hello

    For your #1 question:

    Start > programs > Accessories > system tools > Task Scheduler

    Look for the tasks listed on HP., if you see them you can delete them or distributes them to run once. Who should take care of the problem

    For your question #2:

    There are a few services that are needed for starting windows update to work correctly. (these are services that depend on it).

    Take a read of this thread (found on another forum). BlackViper.com, there a nice breakdown of the Windows Vista SP2 service configurations.

    Kind regards

    ERICO

    Published by erico on 2009-09-19 12:13
  • Impossible to update Microsoft Windows Vista SP2

    I have a laptop that is running Windows Vista Service Pack 2 from Microsoft yet. I have not started the laptop for almost a year and I understand that the operating system is no longer supported. I'm just trying to get all the other updates carried forward after November 13, 2015. The update of Windows seems not to be able to get updates or is suspended. In the past when Windows XP support ended, I was still able to update the o/s to the last update available for the well type beyond a year after. I don't see why I can't still not updated for Windows Vista SP2.

    I need constructive responses to solve the problem and not the usual, "my computer is old and needs to be upgraded or replaced", remarks. I don't have the funds to keep the upgrade for the latest and best. The laptop, I always work and if I have funds or if I know that it can smoothly run Windows 10, I could upgrade the o/s.

    Follow these steps: Install KB3078601, KB3109094, KB3145739, KB3164033, KB3168965 and KB3185911 manually. Download links:

    http://Wu.krelay.de/en/

    The value "never search for updates' automatic updates and reboot before installation manual. The updates themselves can be installed in a line without having to restart in the meantime.

    Best regards, VZ

  • SP2 for Windows Vista will not install. Receive error 800b0100 code. Windows Update has encountered an unknown error.

    SP2 for Windows Vista will not install. Receive error 800b0100 code. I already tried all possible solutions - disabled and even uninstalled McAfee Firewall disabled, ran the CheckSUR repeatedly (see below for the final analysis), tried to install from windows update, also downloaded the stand-alone MS pack, tried selective startup and hidden States of services, still nothing. It has been 2 days work on this. Help, please!

    =================================
    Preparation of control system was updated.
    Binary version 6.0.6002.22202
    Package Version 6.0
    2009-10-24 12:36

    Checking Windows Service Packages

    Checking of manifests package and catalogs

    Checking package Watchlist

    Watchlist checking

    Checking packages
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    (f) MOTHER of CBS missing 0 x 00000002 servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum

    Control components store

    Summary:
    Seconds executed: 1241
    Found 4 errors
    CBS MUM lack count: 4

    Unavailable repair files:
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.mum
    servicing\packages\Package_2_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client_1~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467_client~31bf3856ad364e35~x86~~6.0.1.0.cat
    servicing\packages\Package_for_KB975467~31bf3856ad364e35~x86~~6.0.1.0.cat

    Hello Yiratr,

    Thank you for using the Microsoft answers Forums.

    Solution:

    Follow the steps in the web link below.

    http://support.Microsoft.com/kb/956702

    That should do the trick for you.

    Thank you.

    Kind regards

    Augustine.

    "URGO".

    UDAY $012 please let me know that whether the solution worked or not, I thank you and appreciate your comments. URGO

  • Windows Vista will not install new updates after installing SP2

    Hi, I have a problem with the update of my windows. It started after a fact a factory reset. Here's the history:

    I have a some what old laptop (8 years). It came with a Vista installed with service pack 1 installed at the factory. Over the years, I did a few factory resets (every 2-3 years). I never had problems up to now. What is happening now is that I can not exceed SP2. I tried two different ways, none of them worked. After the reset, I first uninstall a bunch of stupid programs that came with the laptop, and then defragment and then have two ways to proceed. I tried to use windows update, installed more than 100 updates, updates install held until finally I offered service Pack2, installed successfully but then no more updates were offered. Then I tried a different approach - a new reset, uninstall, Defrag, and then downloaded and installed SP2 directly from the Download Center. And again the same thing happens. From the SP2 installation I check updates, download the new update agent and nothing happens after that. He keeps looking for new updates all day (about 50% of the processor by using all the time).

    I read some articles and discussions but could not find anyone with the same problem (most of the users reported some error codes which is something I can't do). I tried the fix tool - it does nothing! Whenever I run it, it is mistakes - sometimes 2, sometimes up to 5. Sometimes, it makes account all fixed, other times that it reports missing or corrupt files do not set. Whatever the results if I restart and when I try to check for updates again it is still the same story.

    Also I tried to install it manually IE9 as soon as SP2 is installed (I understand that this is not supported under SP1) but the installation fails. I expected to be available in updates, but as I don't get updates I tried to install it myself. Not sure if it's related (although I guess it is), but the Defender is not able to verify new definitions either.

    Any suggestions? Maybe the registry is damaged or some of the files using the update agent is are corrupt? There are currently no antivirus program installed that could block whatever it is. I haven't touched Windows Firewall somehow everything must therefore be attributed to the default values.

    You understand is that? I came across exactly the same problem... restoration of an old book to give to a family member, and every time I came to the point of installing SP2 and a more recent windows update agent just after, I couldn't install more updates. It would block 'check updates' forever. Tried twice, same problem. However, I tried some things differently the third time and exceeded the question.

    Let me know if you still need help, and I will respond with what I've done.

Maybe you are looking for