the Windows Installer appears after each start up, then disappears. If I try to install anything, he stops and tells me to wait a gift install is complete.

Similar Questions

• The Windows Installer appears constantly everytime I open any folder.

  Whenever I open any folder on my desktop or open my computer or anything like that, the windows installer appears.

  Also I can not install any programs, it gives me an error message cannot install the program, a facility is underway complete that installation before continuing.

  There is also to msiexec.exe running.

  I tried the Windows install cleanup, this would not work saying that my windows installer may are not installed correctly.

  Ive been struggling with this for always.

  This started after I did a cleanup on my computer and delete some registry keys for some software, for some time it was asked to install the accelerator earthlink with a cd, I got rid of these files (I think) but the problem persists.

  I am running windows xp professional on an evo d510 sff manufactured by compaq. My processor is a intel pentium 4.

  Any help please? Ive been working on it for centuries.

  Hello Lowki11,

  You can also try a System File Checker to see if you have corrupted system files.

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Reboot your system.

  I hope this helps.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• The Windows Installer appears when not claimed after you install the new printer.

  I installed a Canon S400 printer and now when I open a folder, file or no matter what shortcut (either by double clicking or right click Open) MSI is trying to install one of the two applications PDF I had already installed. After canceling the installation program, the file opens. How can I fix? I am running Windows XP SP2. Please do not say reinstall applications, I have uninstalled them because they proved to be useless junk.

  If you don't want to reinstall applications, then use the Windows Installer Cleanup utility to remove these entries.

  Clean Up MSI (Windows Installer) - http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  MS - MVP - Elephant Boy computers - don't panic!

• Photoshop elements 14 why the spinning wheel appears after each action for several seconds or minutes?

  After installing Photoshop elements 14 I get a spinning wheel after each action mainly to the editor and Expert. As soon as you click the mouse for an action to complete the wheel appears and often does not stop.

  Why is this?

  On a Mac

  reset your preferences-

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html, http://www.photokaboom.com/photography/learn/Photoshop_Elements/troubleshooting/1_delete_p references_file.htm

• Why the windows installer opens whenever I start Outlook Express?

  Why is open MSI whenever I start Outlook Express, the only way to kill this process via ctrl/alt/del, when I try to stop the process also kills outlook.

  Often, it's because she's trying to install the auditor spelling or similar components.  Try going to tools | Options | Spelling and uncheck the option to always check the spelling and see if that fixes it.

  Steve

• Error message appears after each start up toward the top of my computer.

  Error loading: C:\Users\Michelle\AppData\Roaming\mousel.dll
  The specified module could not be found

  You could have, or still are, infected by malware; and it could also be a starting top left him entry.

  Malware scan:

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight...

   

  How to use Malwarebytes once it is installed and updated:

  1. open Malwarebytes > click the update tab at the top > get the latest updates.

  2. on the Scanner tab, make sure that thePerform full scan option is selected and then click on theScan button to start scanning your computer

  3 MBAM will now start to scan your computer for malware. This process can take some time.

  4. when the scan is complete, a message box will appear

  5. you must click on the OK button to close the message box and continue the process of Malwareremoval.

  6. you will now be at the main scanner screen. At this point, you must click on the button toview the result .

  7. a screen showing all of the malware displayed the program that is

  8. you must now click remove selection button to remove all the listed malware. MBAM will now delete all of the files and registry keys and add them to the programs quarantine. When you remove files, MBAM may require a restart in order to eliminate some of them. If it displays a message stating that it needs to restart, please let him do. Once your computer has rebooted, and logged in, please continue with the remaining steps.

  9. when MBAM has finished remove the malware, it will open the scan log and display it in Notepad. See the log as desired, and then close the Notepad window.

  10. you can now exit the MBAM program.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the error persists after scanning, use the program to out startup:

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configureAutoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more. Autoruns goes way beyond the MSConfig utility bundled with Windows Me and XP.

  See you soon.

  Mick Murphy - Microsoft partner

• How can I empty the Windows installation on my hard drive?

  How can I empty the Windows installation on my hard drive, please?  I was going to re - install, then I changed my mind.
  Now, every time that I reboot, instead of launching Windows XP Pro, it try to run Windows installation.  The installation program appears as a second menu item under "Windows XP Pro" on the black screen at launch.

  How can I remove it from the startup screen and flush it out of my system?

  Any correction, automated for this?

  Thank you.

  It is difficult to determine what you did, but the symptoms you describe can be eliminated by editing the boot.ini file (you can also make things really difficult if you make a mistake when you edit the boot.ini file, so be careful).  Will not be "flush out the Windows installation" of your system, but it will stop the menu from appearing at startup time.

  See http://support.microsoft.com/kb/289022

  Your boot.ini file probably has a second line in the [operating systems] section.  Make sure that you delete only the line that points to the installation routine.

• The Windows Installer will not stop

  I have vista64 and when I use some programs, especially my HP MFP, the windows installer appears every time over and over again. The problem is not with the printer drivers, because I replaced my printer and installed the new software and the installation window returns.

  Hello

  Download the Installer Cleanup Utility from the link below and use it to remove the remains of the latest software installed:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Satellite P200-140 - Toshiba Logo appears for a few seconds, then disappears

  I have a problem simular with a P200-140.

  When he starts the Toshiba Logo appears for a few seconds, then disappears, if I tilt the screen I can see that the image is there but the screen does not light.

  I used my projector SVGA output and which works very well. Sometimes after having started a few times the display returns and will then work fine but disappear again without warning especially if yiou closes the screen.

  I don't know if it's maybe a switch problem?
  Y at - it a contact microphone that could stick when you close the lid?

  I tried deleting and reinstalling display drivers and booting in safe mode, neither makes the difference.

  Hi Mortiss,
  Maybe the backlight of the lcd screen went... (I don't think)
  or broken wires... (!)
  or the lid switch is defectiv (rare)

  ask a servicepartner to help...

  deassemble unity... or watch this will kill your warranty...

• I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system?

  Resettlement without disks

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  Hello. I have a computer bought from a friend with windows vista home premium installed. I want to format my hard drive to start over but I do not have the windows installation disc. How can I reinstall the pack without the disks after I cleaned the system? Thank you, Kim

  You have a hard drive partition to do - but you would need to contact/see the FAQ from the hardware manufacturer (HP, Dell, Gateway, Lenovo, etc) to see if and how.

  Otherwise - you might have to order (pay for possibly) the factory restore/recovery of the value of the manufacturer.

  http://www.ZDNet.com/blog/Bott/lost-your-Windows-discs-how-to-get-replacement-media-legally/4320?tag=nl.E539

  If it was built * friend *, you will communicate with them.  Ask your media.

• Unable to turn on the window Defender, even after that I click on activate the defender of the window. THA page with the tool does not appear...

  Unable to turn on the window Defender, even after that I click on activate the defender of the window on my window vista home premium... The page with the tool does not appear...

  If you have
  one of the following AV, antivirus, programs installed, it will stop your
  Windows Defender. Purpose of these AVs have their own advocates. 2 defenders
  on the same machine will create conflicts.
  Bottom line: it's ok.
  It's normal.
  List of AVs which will stop Windows Defender

  Norton
  McAfee
  AVG
  Microsoft Security
  Essentials

  If you do not have the
  above AV programs, here's how to do to restart Windows Defender:

  Start button > in the search box, type Services > press the Enter key > scroll to find Windows Defender, click on it >...
  topic status , it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If it does not say that, right click on Windows
  Defender > click Properties > to
  Startup type, click on the pointer to the right and select automatic
  to the service status, click Start
  Click OK when finished.

• I try to install or uninstall programs, but a message appears and says "the Windows Installer service is not to be accessible" GOLD that the system administrator has set policies to prevent this installation

  Several times I tried to install itunes but a message pops up saying

  • Windows install is not properly installed and

  I also try to uninstall programs and whenever it says the system administrator has set policies to prevent this installation, but I've changed my settings so that I can be the administrator

  • the windows service install could not be accessed
  Hello
   
  You may encounter this error message when the Windows Installer files on the system are missing or damaged.
  You can resolve the error by using the methods mentioned below:
   
  Method 1: Start the Windows Installer service
   
  a. Click Start, type "Services.msc" and press {ENTER}
  b. double-click Windows Installer
  c. the value of the Windows Installer Manual startup type
  d. Click Start to start the service. Note the error message, if any.
  e. click OK.
   
  Method 2: Unsubscribe and re - register the Windows Installer
   
  a. Click Start, click Run, type "MSIEXEC /Unregister." and then click OK. Even if you do it right, it may seem that nothing is happening.
  b. Click Start, run, type "MSIEXEC/REGSERVER" and then click OK. Even if you do it right, it may seem that nothing happens, or you can briefly see an hourglass.
  After you run this command, the operation is complete.
  c. try your application based on Windows Installer again.
   
  Method 3: Scan SFC
   
  Perform a scan of the SFC to check if this is related to the missing or corrupt file system.
   
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Please can someone explain why the windows Installer keeps appearing when nothing is installed? Any way to stop this?

  Why the Windows Installer keep popping up, either on a web page or an e-mail to the office when nothing is installed.  No way to stop that... ?

  The desktop of your computer, click on the tab "Start", usually located at the bottom left of the screen (on Vista, it's maybe the windows symbol instead of the word 'Start').

  Now, find and click on the program title 'run '. Vista users can locate this program by typing "run" in the area of research at the bottom of the menu 'start '.

  Once you open 'Run', type 'MSCONFIG' in the empty box and click 'OK '. This will open the System Configuration utility.

  With the open System Configuration utility, select the tab "Services".

  Scroll down the list of services (it may be advantageous to click on the 'service' column to sort the services by alphabetical order) until you find the program "Windows Installer".

  Now, click on the checkbox next to the name of the Windows Installer and click on the button 'Disable' at the bottom of the Configuration of the system.

• Error 5 when you try to start the Windows Installer service

  THIS PROBLEM IS RESOLVED (PLEASE READ):
  There was NOTHING on the internet that has helped me. While I thought, on the permissions, and I thought of my C:\ (main one with what you have).

  Here's what I did to fix (this applies to all versions on Windows):

  (1) right click on C:\ (or E:\ whatever one holds your stuff)

  2) go to properties

  (3) under Security, click SYSTEM

  (4) ensure that the SYSTEM has all the permissions on ALL

  NOTE: When you do that on that day will be "cannot give permission to C:\boot (for example)" that's fine, just click continue until it's over

  And I'll put the first response as response so that when people search he said answered

  =========================================================

  My windows installer does not work so I went to go and start it I just got "error 5 access denied". Then I went to start another service to see if it was my computer or if it was just Windows Installer and it worked. I tried to go here (http://support.microsoft.com/kb/943996) and everything he does, but he did nothing. I tried to run hard but he gave me "80072F8F" error code and I didn't spend time fixing something that might fix something.

  I tried to go to regedit.exe and did all what is written on http://support.microsoft.com/kb/943996, but nothing worked!
  Help, please!
  I run Windows7 64-bit Home Premium edition

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.